[ Upstream commit e486df39305864604b7e25f2a95d51039517ac57 ]

The dma_desc->bytes_transferred counter tracks the number of bytes
moved by the DMA channel. This is then used to calculate the information
passed back in the in the tegra_dma_tx_status callback, which is usually
fine.

When the DMA channel is configured as continous, then the bytes_transferred
counter will increase over time and eventually overflow to become negative
so the residue count will become invalid and the ALSA sound-dma code will
report invalid hardware pointer values to the application. This results in
some users becoming confused about the playout position and putting audio
data in the wrong place.

To fix this issue, always ensure the bytes_transferred field is modulo the
size of the request. We only do this for the case of the cyclic transfer
done ISR as anyone attempting to move 2GiB of DMA data in one transfer
is unlikely.

Note, we don't fix the issue that we should /never/ transfer a negative
number of bytes so we could make those fields unsigned.
Reviewed-by: NDmitry Osipenko <digetx@gmail.com>
Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>
Acked-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a0e447b0c50240a90ab84b7126b3c06b0bab4adc ]

This patch fixes settings of GPLL frequency in fractional mode for
rk3328. In this mode, FOUTVCO is calcurated by following formula:
  FOUTVCO = FREF * FBDIV / REFDIV + ((FREF * FRAC / REFDIV) >> 24)

The problem is in FREF * FRAC >> 24 term. This result always lacks
one from target value is specified by rate member. For example first
itme of rk3328_pll_frac_rate originally has
  - rate  : 1016064000
  - refdiv: 3
  - fbdiv : 127
  - frac  : 134217
  - FREF * FBDIV / REFDIV        = 1016000000
  - (FREF * FRAC / REFDIV) >> 24 = 63999
Thus calculated rate is 1016063999. It seems wrong.

If frac has 134218 (it is increased 1 from original value), second
term is 64000. All other items have same situation. So this patch
adds 1 to frac member in all items of rk3328_pll_frac_rate.
Signed-off-by: NKatsuhiro Suzuki <katsuhiro@katsuster.net>
Acked-by: NElaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8d9981efbcab066d17af4d3c85c169200f6f78df ]

Order, ids and size  between the table of regmap clocks and the onecell
data table could be different.

Set regmap pointer in all the regmap clocks before starting the
registration using the onecell data, to make sure we don't
get into an incoherent situation.
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181221160239.26265-3-jbrunet@baylibre.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 00eb5b0da8d27b3c944bfc959c3344d665caae26 ]

After drm_fb_helper_fbdev_setup calls drm_fb_helper_init,
"dev->fb_helper" will be initialized (and thus drm_fb_helper_fini will
have some effect). After that, drm_fb_helper_initial_config is called
which may call the "fb_probe" driver callback.

This driver callback may call drm_fb_helper_defio_init (as is done by
drm_fb_helper_generic_probe) or set a framebuffer (as is done by bochs)
as documented. These are normally cleaned up on exit by
drm_fb_helper_fbdev_teardown which also calls drm_fb_helper_fini.

If an error occurs after "fb_probe", but before setup is complete, then
calling just drm_fb_helper_fini will leak resources. This was triggered
by df2052cc922 ("bochs: convert to drm_fb_helper_fbdev_setup/teardown"):

    [   50.008030] bochsdrmfb: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer
    [   50.009436] bochs-drm 0000:00:02.0: [drm:drm_fb_helper_fbdev_setup] *ERROR* fbdev: Failed to set configuration (ret=-38)
    [   50.011456] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 2
    [   50.013604] WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x280/0x2a0
    [   50.016175] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G                T 4.20.0-rc7 #1
    [   50.017732] EIP: drm_mode_config_cleanup+0x280/0x2a0
    ...
    [   50.023155] Call Trace:
    [   50.023155]  ? bochs_kms_fini+0x1e/0x30
    [   50.023155]  ? bochs_unload+0x18/0x40

This can be reproduced with QEMU and CONFIG_FB_LITTLE_ENDIAN=n.

Link: https://lkml.kernel.org/r/20181221083226.GI23332@shao2-debian
Link: https://lkml.kernel.org/r/20181223004315.GA11455@al
Fixes: 87412163 ("drm/fb-helper: Add drm_fb_helper_fbdev_setup/teardown()")
Reported-by: Nkernel test robot <rong.a.chen@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: NPeter Wu <peter@lekensteyn.nl>
Reviewed-by: NNoralf Trønnes <noralf@tronnes.org>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181223005507.28328-1-peter@lekensteyn.nlSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d071ae09a4a1414c1433d5ae9908959a7325b0ad ]

Accessing per-CPU variables is done by finding the offset of the
variable in the per-CPU block and adding it to the address of the
respective CPU's block.

Section 3.10.8 of ld.bfd's documentation states:

  For expressions involving numbers, relative addresses and absolute
  addresses, ld follows these rules to evaluate terms:

  Other binary operations, that is, between two relative addresses
  not in the same section, or between a relative address and an
  absolute address, first convert any non-absolute term to an
  absolute address before applying the operator."

Note that LLVM's linker does not adhere to the GNU ld's implementation
and as such requires implicitly-absolute terms to be explicitly marked
as absolute in the linker script. If not, it fails currently with:

  ld.lld: error: ./arch/x86/kernel/vmlinux.lds:153: at least one side of the expression must be absolute
  ld.lld: error: ./arch/x86/kernel/vmlinux.lds:154: at least one side of the expression must be absolute
  Makefile:1040: recipe for target 'vmlinux' failed

This is not a functional change for ld.bfd which converts the term to an
absolute symbol anyways as specified above.

Based on a previous submission by Tri Vo <trong@android.com>.
Reported-by: NDmitry Golovin <dima@golovin.in>
Signed-off-by: NRafael Ávila de Espíndola <rafael@espindo.la>
[ Update commit message per Boris' and Michael's suggestions. ]
Signed-off-by: NNick Desaulniers <ndesaulniers@google.com>
[ Massage commit message more, fix typos. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>
Tested-by: NDmitry Golovin <dima@golovin.in>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Cao Jin <caoj.fnst@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tri Vo <trong@android.com>
Cc: dima@golovin.in
Cc: morbo@google.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181219190145.252035-1-ndesaulniers@google.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ba2ffc96321c8433606ceeb85c9e722b8113e5a7 ]

Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware
failed instead of meaningless goto out to avoid the following memory leak
reports(Only the last one listed):

unreferenced object 0xc28a9a00 (size 512):
  comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
  backtrace:
    [<6624adab>] kmemleak_alloc+0x40/0x74
    [<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270
    [<db4d731d>] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore]
    [<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore]
    [<cbf30777>] drv_add_interface+0xa4/0x1a0 [mac80211]
    [<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211]
    [<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211]
    [<7e1d425a>] process_one_work+0x284/0x42c
    [<55f9432e>] worker_thread+0x2fc/0x48c
    [<abb582c6>] kthread+0x148/0x160
    [<63144b13>] ret_from_fork+0x14/0x2c
    [< (null)>] (null)
    [<1f6e7715>] 0xffffffff
Signed-off-by: NZumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4ad0be160544ffbdafb7cec39bb8e6dd0a97317a ]

The linux-firmware brcmfmac firmware files contain an embedded table with
per country allowed channels and strength info.

For recent hardware these versions of the firmware are specially build for
linux-firmware, the firmware files directly available from Cypress rely on
a separate clm_blob file for this info.

For some unknown reason Cypress refuses to provide the standard firmware
files + clm_blob files it uses elsewhere for inclusion into linux-firmware,
instead relying on these special builds with the clm_blob info embedded.
This means that the linux-firmware firmware versions often lag behind,
but I digress.

The brcmfmac driver does support the separate clm_blob file and always
tries to load this. Currently we use request_firmware for this. This means
that on any standard install, using the standard combo of linux-kernel +
linux-firmware, we will get a warning:
"Direct firmware load for ... failed with error -2"

On top of this, brcmfmac itself prints: "no clm_blob available (err=-2),
device may have limited channels available".

This commit switches to firmware_request_nowarn, fixing almost any brcmfmac
device logging the warning (it leaves the brcmfmac info message in place).
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 53e0c2aa9a59a48e3798ef193d573ade85aa80f5 ]

Ignore all selinux_inode_notifysecctx() calls on mounts with SBLABEL_MNT
flag unset. This is achived by returning -EOPNOTSUPP for this case in
selinux_inode_setsecurtity() (because that function should not be called
in such case anyway) and translating this error to 0 in
selinux_inode_notifysecctx().

This fixes behavior of kernfs-based filesystems when mounted with the
'context=' option. Before this patch, if a node's context had been
explicitly set to a non-default value and later the filesystem has been
remounted with the 'context=' option, then this node would show up as
having the manually-set context and not the mount-specified one.

Steps to reproduce:
    # mount -t cgroup2 cgroup2 /sys/fs/cgroup/unified
    # chcon unconfined_u:object_r:user_home_t:s0 /sys/fs/cgroup/unified/cgroup.stat
    # ls -lZ /sys/fs/cgroup/unified
    total 0
    -r--r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.controllers
    -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.max.depth
    -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.max.descendants
    -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.procs
    -r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat
    -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.subtree_control
    -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.threads
    # umount /sys/fs/cgroup/unified
    # mount -o context=system_u:object_r:tmpfs_t:s0 -t cgroup2 cgroup2 /sys/fs/cgroup/unified

Result before:
    # ls -lZ /sys/fs/cgroup/unified
    total 0
    -r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.controllers
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.max.depth
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.max.descendants
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.procs
    -r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.subtree_control
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.threads

Result after:
    # ls -lZ /sys/fs/cgroup/unified
    total 0
    -r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.controllers
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.depth
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.descendants
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.procs
    -r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.stat
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.subtree_control
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.threads
Signed-off-by: NOndrej Mosnacek <omosnace@redhat.com>
Reviewed-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <paul@paul-moore.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 927185c124d62a9a4d35878d7f6d432a166b74e3 ]

The kernel uses the OUTPUT_FORMAT linker script command in it's linker
scripts. Most of the time, the -m option is passed to the linker with
correct architecture, but sometimes (at least for x86_64) the -m option
contradicts the OUTPUT_FORMAT directive.

Specifically, arch/x86/boot and arch/x86/realmode/rm produce i386 object
files, but are linked with the -m elf_x86_64 linker flag when building
for x86_64.

The GNU linker manpage doesn't explicitly state any tie-breakers between
-m and OUTPUT_FORMAT. But with BFD and Gold linkers, OUTPUT_FORMAT
overrides the emulation value specified with the -m option.

LLVM lld has a different behavior, however. When supplied with
contradicting -m and OUTPUT_FORMAT values it fails with the following
error message:

  ld.lld: error: arch/x86/realmode/rm/header.o is incompatible with elf_x86_64

Therefore, just add the correct -m after the incorrect one (it overrides
it), so the linker invocation looks like this:

  ld -m elf_x86_64 -z max-page-size=0x200000 -m elf_i386 --emit-relocs -T \
    realmode.lds header.o trampoline_64.o stack.o reboot.o -o realmode.elf

This is not a functional change for GNU ld, because (although not
explicitly documented) OUTPUT_FORMAT overrides -m EMULATION.

Tested by building x86_64 kernel with GNU gcc/ld toolchain and booting
it in QEMU.

 [ bp: massage and clarify text. ]
Suggested-by: NDmitry Golovin <dima@golovin.in>
Signed-off-by: NGeorge Rimar <grimar@accesssoftek.com>
Signed-off-by: NTri Vo <trong@android.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Tested-by: NTri Vo <trong@android.com>
Tested-by: NNick Desaulniers <ndesaulniers@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Matz <matz@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: morbo@google.com
Cc: ndesaulniers@google.com
Cc: ruiu@google.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190111201012.71210-1-trong@android.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 934c5b32a5e43d8de2ab4f1566f91d7c3bf8cb64 ]

The correct way for legacy drivers to update properties that need to
do a full modeset, is to do a full modeset.

Note that we don't need to call the drm_mode_config_internal helper
because we're not changing any of the refcounted paramters.

v2: Fixup error handling (Ville). Since the old code didn't bother
I decided to just delete it instead of adding even more code for just
error handling.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-2-daniel.vetter@ffwll.chSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 890880ddfdbe256083170866e49c87618b706ac7 ]

When drivers pass non-empty lists of modifiers for initializing their
planes, we can infer that they allow framebuffer modifiers and set the
driver's allow_fb_modifiers mode config element.

In case the allow_fb_modifiers element was not set (some drivers tend
to set them after registering planes), the modifiers will still be
registered but won't be available to userspace unless the flag is set
later. However in that case, the IN_FORMATS blob won't be created.

In order to avoid this case and generally reduce the trouble associated
with the flag, always set allow_fb_modifiers when a non-empty list of
format modifiers is passed at plane init.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190104085610.5829-1-paul.kocialkowski@bootlin.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6daae00243e622dd3feec7965bfe421ad6dd317e ]

Gigabit Ethernet requires the Ethernet TXD0..3 and RXD0..3 data lines.
Add the missing eth_rxd2 and eth_rxd3 definitions so we don't have to
rely on the bootloader to set them up correctly.

The vendor u-boot sources for Odroid-C1 use the following Ethernet
pinmux configuration:
  SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_6, 0x3f4f);
  SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_7, 0xf00000);
This translates to the following pin groups in the mainline kernel:
- register 6 bit  0: eth_rxd1 (DIF_0_P)
- register 6 bit  1: eth_rxd0 (DIF_0_N)
- register 6 bit  2: eth_rx_dv (DIF_1_P)
- register 6 bit  3: eth_rx_clk (DIF_1_N)
- register 6 bit  6: eth_tx_en (DIF_3_P)
- register 6 bit  8: eth_ref_clk (DIF_3_N)
- register 6 bit  9: eth_mdc (DIF_4_P)
- register 6 bit 10: eth_mdio_en (DIF_4_N)
- register 6 bit 11: eth_tx_clk (GPIOH_9)
- register 6 bit 12: eth_txd2 (GPIOH_8)
- register 6 bit 13: eth_txd3 (GPIOH_7)
- register 7 bit 20: eth_txd0_0 (GPIOH_6)
- register 7 bit 21: eth_txd1_0 (GPIOH_5)
- register 7 bit 22: eth_rxd3 (DIF_2_P)
- register 7 bit 23: eth_rxd2 (DIF_2_N)

All functions except eth_rxd2 and eth_rxd3 are already supported by the
pinctrl-meson8b driver.
Suggested-by: NJianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: NKevin Hilman <khilman@baylibre.com>
Tested-by: NEmiliano Ingrassia <ingrassia@epigenesys.com>
Reviewed-by: NEmiliano Ingrassia <ingrassia@epigenesys.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f01a7beb6791f1c419424c1a6958b7d0a289c974 ]

The act8600_sudcdc_voltage_ranges setting does not match the datasheet.

The problems in below entry:
  REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),

1. The off-by-one min_sel causes wrong volatage calculation.
   The min_sel should be 192.
2. According to the datasheet[1] Table 7. (on page 43):
   The selector 248 (0b11111000) ~ 255 (0b11111111) are 41.400V.

Also fix off-by-one for ACT8600_SUDCDC_VOLTAGE_NUM.

[1] https://active-semi.com/wp-content/uploads/ACT8600_Datasheet.pdf

Fixes: df3a950e ("regulator: act8865: Add act8600 support")
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 49710c32cd9d6626a77c9f5f978a5f58cb536b35 ]

Previously when doing format enumeration, it was returning all
 formats supported by driver, even if they're not supported by hw.
Add missing check for fmt_ver_flag, so it'll be fixed and only those
 supported by hw will be returned. Similar thing is already done
 in s5p_jpeg_find_format.

It was found by using v4l2-compliance tool and checking result
 of VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS test
and using v4l2-ctl to get list of all supported formats.

Tested on s5pv210-galaxys (Samsung i9000 phone).

Fixes: bb677f3a ("[media] Exynos4 JPEG codec v4l2 driver")
Signed-off-by: NPawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: NJacek Anaszewski <jacek.anaszewski@gmail.com>
[hverkuil-cisco@xs4all.nl: fix a few alignment issues]
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c5ff0edb8e2270a75935c73217fb0de1abd2d910 ]

There is a block of code in rvin_group_link_notify() that prevents
enabling a link to a VIN node if any entity in the media graph is
in use. This prevents enabling a VIN link even if there is an in-use
entity somewhere in the graph that is independent of the link's
pipeline.

For example, the code block will prevent enabling a link from
the first rcar-csi2 receiver to a VIN node even if there is an
enabled link somewhere far upstream on the second independent
rcar-csi2 receiver pipeline.

If this code block is meant to prevent modifying a link if any entity
in the graph is actively involved in streaming (because modifying
the CHSEL register fields can disrupt any/all running streams), then
the entities stream counts should be checked rather than the use counts.

(There is already such a check in __media_entity_setup_link() that verifies
the stream_count of the link's source and sink entities are both zero,
but that is insufficient, since there should be no running streams in
the entire graph).

Modify the code block to check the entity stream_count instead of the
use_count (and elaborate on the comment). VIN node links can now be
enabled even if there are other independent in-use entities that are
not streaming.

Fixes: c0cc5aef ("media: rcar-vin: add link notify for Gen3")
Signed-off-by: NSteve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8e2f311a68494a6677c1724bdcb10bada21af37c ]

Following command:
  iptables -D FORWARD -m physdev ...
causes connectivity loss in some setups.

Reason is that iptables userspace will probe kernel for the module revision
of the physdev patch, and physdev has an artificial dependency on
br_netfilter (xt_physdev use makes no sense unless a br_netfilter module
is loaded).

This causes the "phydev" module to be loaded, which in turn enables the
"call-iptables" infrastructure.

bridged packets might then get dropped by the iptables ruleset.

The better fix would be to change the "call-iptables" defaults to 0 and
enforce explicit setting to 1, but that breaks backwards compatibility.

This does the next best thing: add a request_module call to checkentry.
This was a stray '-D ... -m physdev' won't activate br_netfilter
anymore.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 875aac8a46424e5b73a9ff7f40b83311b609e407 ]

In async_tx_test_ack(), it uses flags in struct dma_async_tx_descriptor
to check the ACK status. As hidma reuses the descriptor in a free list
when hidma_prep_dma_*(memcpy/memset) is called, the flag will keep ACKed
if the descriptor has been used before. This will cause a BUG_ON in
async_tx_quiesce().

  kernel BUG at crypto/async_tx/async_tx.c:282!
  Internal error: Oops - BUG: 0 1 SMP
  ...
  task: ffff8017dd3ec000 task.stack: ffff8017dd3e8000
  PC is at async_tx_quiesce+0x54/0x78 [async_tx]
  LR is at async_trigger_callback+0x98/0x110 [async_tx]

This patch initializes flags in dma_async_tx_descriptor by the flags
passed from the caller when hidma_prep_dma_*(memcpy/memset) is called.

Cc: Joey Zheng <yu.zheng@hxt-semitech.com>
Reviewed-by: NSinan Kaya <okaya@kernel.org>
Signed-off-by: NShunyong Yang <shunyong.yang@hxt-semitech.com>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 546c0547555efca8ba8c120716c325435e29df1b ]

When dma_cookie_complete() is called in hidma_process_completed(),
dma_cookie_status() will return DMA_COMPLETE in hidma_tx_status(). Then,
hidma_txn_is_success() will be called to use channel cookie
mchan->last_success to do additional DMA status check. Current code
assigns mchan->last_success after dma_cookie_complete(). This causes
a race condition of dma_cookie_status() returns DMA_COMPLETE before
mchan->last_success is assigned correctly. The race will cause
hidma_tx_status() return DMA_ERROR but the transaction is actually a
success. Moreover, in async_tx case, it will cause a timeout panic
in async_tx_quiesce().

 Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for
 transaction
 ...
 Call trace:
 [<ffff000008089994>] dump_backtrace+0x0/0x1f4
 [<ffff000008089bac>] show_stack+0x24/0x2c
 [<ffff00000891e198>] dump_stack+0x84/0xa8
 [<ffff0000080da544>] panic+0x12c/0x29c
 [<ffff0000045d0334>] async_tx_quiesce+0xa4/0xc8 [async_tx]
 [<ffff0000045d03c8>] async_trigger_callback+0x70/0x1c0 [async_tx]
 [<ffff0000048b7d74>] raid_run_ops+0x86c/0x1540 [raid456]
 [<ffff0000048bd084>] handle_stripe+0x5e8/0x1c7c [raid456]
 [<ffff0000048be9ec>] handle_active_stripes.isra.45+0x2d4/0x550 [raid456]
 [<ffff0000048beff4>] raid5d+0x38c/0x5d0 [raid456]
 [<ffff000008736538>] md_thread+0x108/0x168
 [<ffff0000080fb1cc>] kthread+0x10c/0x138
 [<ffff000008084d34>] ret_from_fork+0x10/0x18

Cc: Joey Zheng <yu.zheng@hxt-semitech.com>
Reviewed-by: NSinan Kaya <okaya@kernel.org>
Signed-off-by: NShunyong Yang <shunyong.yang@hxt-semitech.com>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9227ab5643cb8350449502dd9e3168a873ab0e3b ]

The warning got introduced by commit 930507c18304 ("arm64: add basic
Kconfig symbols for i.MX8"). Since it got enabled for arm64. The warning
haven't been seen before since size_t was 'unsigned int' when built on
arm32.

../drivers/dma/imx-dma.c: In function ‘imxdma_sg_next’:
../include/linux/kernel.h:846:29: warning: comparison of distinct pointer types lacks a cast
   (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
                             ^~
../include/linux/kernel.h:860:4: note: in expansion of macro ‘__typecheck’
   (__typecheck(x, y) && __no_side_effects(x, y))
    ^~~~~~~~~~~
../include/linux/kernel.h:870:24: note: in expansion of macro ‘__safe_cmp’
  __builtin_choose_expr(__safe_cmp(x, y), \
                        ^~~~~~~~~~
../include/linux/kernel.h:879:19: note: in expansion of macro ‘__careful_cmp’
 #define min(x, y) __careful_cmp(x, y, <)
                   ^~~~~~~~~~~~~
../drivers/dma/imx-dma.c:288:8: note: in expansion of macro ‘min’
  now = min(d->len, sg_dma_len(sg));
        ^~~

Rework so that we use min_t and pass in the size_t that returns the
minimum of two values, using the specified type.
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Reviewed-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ce48c457b95316b9a01b5aa9d4456ce820df94b4 ]

Since we've had:

  commit cb538267ea1e ("jump_label/lockdep: Assert we hold the hotplug lock for _cpuslocked() operations")

we've been getting some lockdep warnings during init, such as on HiKey960:

[    0.820495] WARNING: CPU: 4 PID: 0 at kernel/cpu.c:316 lockdep_assert_cpus_held+0x3c/0x48
[    0.820498] Modules linked in:
[    0.820509] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G S                4.20.0-rc5-00051-g4cae42a #34
[    0.820511] Hardware name: HiKey960 (DT)
[    0.820516] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.820520] pc : lockdep_assert_cpus_held+0x3c/0x48
[    0.820523] lr : lockdep_assert_cpus_held+0x38/0x48
[    0.820526] sp : ffff00000a9cbe50
[    0.820528] x29: ffff00000a9cbe50 x28: 0000000000000000
[    0.820533] x27: 00008000b69e5000 x26: ffff8000bff4cfe0
[    0.820537] x25: ffff000008ba69e0 x24: 0000000000000001
[    0.820541] x23: ffff000008fce000 x22: ffff000008ba70c8
[    0.820545] x21: 0000000000000001 x20: 0000000000000003
[    0.820548] x19: ffff00000a35d628 x18: ffffffffffffffff
[    0.820552] x17: 0000000000000000 x16: 0000000000000000
[    0.820556] x15: ffff00000958f848 x14: 455f3052464d4d34
[    0.820559] x13: 00000000769dde98 x12: ffff8000bf3f65a8
[    0.820564] x11: 0000000000000000 x10: ffff00000958f848
[    0.820567] x9 : ffff000009592000 x8 : ffff00000958f848
[    0.820571] x7 : ffff00000818ffa0 x6 : 0000000000000000
[    0.820574] x5 : 0000000000000000 x4 : 0000000000000001
[    0.820578] x3 : 0000000000000000 x2 : 0000000000000001
[    0.820582] x1 : 00000000ffffffff x0 : 0000000000000000
[    0.820587] Call trace:
[    0.820591]  lockdep_assert_cpus_held+0x3c/0x48
[    0.820598]  static_key_enable_cpuslocked+0x28/0xd0
[    0.820606]  arch_timer_check_ool_workaround+0xe8/0x228
[    0.820610]  arch_timer_starting_cpu+0xe4/0x2d8
[    0.820615]  cpuhp_invoke_callback+0xe8/0xd08
[    0.820619]  notify_cpu_starting+0x80/0xb8
[    0.820625]  secondary_start_kernel+0x118/0x1d0

We've also had a similar warning in sched_init_smp() for every
asymmetric system that would enable the sched_asym_cpucapacity static
key, although that was singled out in:

  commit 40fa3780bac2 ("sched/core: Take the hotplug lock in sched_init_smp()")

Those warnings are actually harmless, since we cannot have hotplug
operations at the time they appear. Instead of starting to sprinkle
useless hotplug lock operations in the init codepaths, mute the
warnings until they start warning about real problems.
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NValentin Schneider <valentin.schneider@arm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: cai@gmx.us
Cc: daniel.lezcano@linaro.org
Cc: dietmar.eggemann@arm.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: longman@redhat.com
Cc: marc.zyngier@arm.com
Cc: mark.rutland@arm.com
Link: https://lkml.kernel.org/r/1545243796-23224-2-git-send-email-valentin.schneider@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 24d48a61f2666630da130cc2ec2e526eacf229e3 ]

Commit '3d035f58 ("drivers/char/hpet.c: allow user controlled mmap for
user processes")' introduced a new kernel command line parameter hpet_mmap,
that is required to expose the memory map of the HPET registers to
user-space. Unfortunately the kernel command line parameter 'hpet_mmap' is
broken and never takes effect due to missing '=' character in the __setup()
code of hpet_mmap_enable.

Before this patch:

dmesg output with the kernel command line parameter hpet_mmap=1

[    0.204152] HPET mmap disabled

dmesg output with the kernel command line parameter hpet_mmap=0

[    0.204192] HPET mmap disabled

After this patch:

dmesg output with the kernel command line parameter hpet_mmap=1

[    0.203945] HPET mmap enabled

dmesg output with the kernel command line parameter hpet_mmap=0

[    0.204652] HPET mmap disabled

Fixes: 3d035f58 ("drivers/char/hpet.c: allow user controlled mmap for user processes")
Signed-off-by: NBuland Singh <bsingh@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ac92985864e187a1735502f6a02f54eaa655b2aa ]

When setting /sys/fs/f2fs/<DEV>/iostat_enable with non-bool value, UBSAN
reports the following warning.

[ 7562.295484] ================================================================================
[ 7562.296531] UBSAN: Undefined behaviour in fs/f2fs/f2fs.h:2776:10
[ 7562.297651] load of value 64 is not a valid value for type '_Bool'
[ 7562.298642] CPU: 1 PID: 7487 Comm: dd Not tainted 4.20.0-rc4+ #79
[ 7562.298653] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 7562.298662] Call Trace:
[ 7562.298760]  dump_stack+0x46/0x5b
[ 7562.298811]  ubsan_epilogue+0x9/0x40
[ 7562.298830]  __ubsan_handle_load_invalid_value+0x72/0x90
[ 7562.298863]  f2fs_file_write_iter+0x29f/0x3f0
[ 7562.298905]  __vfs_write+0x115/0x160
[ 7562.298922]  vfs_write+0xa7/0x190
[ 7562.298934]  ksys_write+0x50/0xc0
[ 7562.298973]  do_syscall_64+0x4a/0xe0
[ 7562.298992]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 7562.299001] RIP: 0033:0x7fa45ec19c00
[ 7562.299004] Code: 73 01 c3 48 8b 0d 88 92 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d dd eb 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ce 8f 01 00 48 89 04 24
[ 7562.299044] RSP: 002b:00007ffca52b49e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 7562.299052] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa45ec19c00
[ 7562.299059] RDX: 0000000000000400 RSI: 000000000093f000 RDI: 0000000000000001
[ 7562.299065] RBP: 000000000093f000 R08: 0000000000000004 R09: 0000000000000000
[ 7562.299071] R10: 00007ffca52b47b0 R11: 0000000000000246 R12: 0000000000000400
[ 7562.299077] R13: 000000000093f000 R14: 000000000093f400 R15: 0000000000000000
[ 7562.299091] ================================================================================

So, if iostat_enable is enabled, set its value as true.
Signed-off-by: NSheng Yong <shengyong1@huawei.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2edefc056e4f0e6ec9508dd1aca2c18fa320efef ]

Host driver should handle interrupt mask register earlier than wake up ish FW
else there will be conditions when FW interrupt comes, host PIMR register still
not set ready, so move the interrupt mask setting before ish_wakeup.

Clear PISR busy_clear bit in ish_irq_handler. If not clear, there will be
conditions host driver received a busy_clear interrupt (before the busy_clear
mask bit is ready), it will return IRQ_NONE after check_generated_interrupt,
the interrupt will never be cleared, causing the DEVICE not sending following
IRQ.

Since PISR clear should not be called for the CHV device we do this change.
After the change, both ISH2HOST interrupt and busy_clear interrupt will be
considered as interrupt from ISH, busy_clear interrupt will return IRQ_HANDLED
from IPC_IS_BUSY check.
Signed-off-by: NSong Hongyan <hongyan.song@intel.com>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 51294bf6b9e897d595466dcda5a3f2751906a200 ]

On cases where device tree entries for fuse and clock provider are in
different order, fuse driver needs to defer probing. This leads to
freeing incorrect IO base address as the fuse->base variable gets
overwritten once during first probe invocation. This leads to the
following spew during boot:

[    3.082285] Trying to vfree() nonexistent vm area (00000000cfe8fd94)
[    3.082308] WARNING: CPU: 5 PID: 126 at /hdd/l4t/kernel/stable/mm/vmalloc.c:1511 __vunmap+0xcc/0xd8
[    3.082318] Modules linked in:
[    3.082330] CPU: 5 PID: 126 Comm: kworker/5:1 Tainted: G S                4.19.7-tegra-gce119d3 #1
[    3.082340] Hardware name: quill (DT)
[    3.082353] Workqueue: events deferred_probe_work_func
[    3.082364] pstate: 40000005 (nZcv daif -PAN -UAO)
[    3.082372] pc : __vunmap+0xcc/0xd8
[    3.082379] lr : __vunmap+0xcc/0xd8
[    3.082385] sp : ffff00000a1d3b60
[    3.082391] x29: ffff00000a1d3b60 x28: 0000000000000000
[    3.082402] x27: 0000000000000000 x26: ffff000008e8b610
[    3.082413] x25: 0000000000000000 x24: 0000000000000009
[    3.082423] x23: ffff000009221a90 x22: ffff000009f6d000
[    3.082432] x21: 0000000000000000 x20: 0000000000000000
[    3.082442] x19: ffff000009f6d000 x18: ffffffffffffffff
[    3.082452] x17: 0000000000000000 x16: 0000000000000000
[    3.082462] x15: ffff0000091396c8 x14: 0720072007200720
[    3.082471] x13: 0720072007200720 x12: 0720072907340739
[    3.082481] x11: 0764076607380765 x10: 0766076307300730
[    3.082491] x9 : 0730073007300730 x8 : 0730073007280720
[    3.082501] x7 : 0761076507720761 x6 : 0000000000000102
[    3.082510] x5 : 0000000000000000 x4 : 0000000000000000
[    3.082519] x3 : ffffffffffffffff x2 : ffff000009150ff8
[    3.082528] x1 : 3d95b1429fff5200 x0 : 0000000000000000
[    3.082538] Call trace:
[    3.082545]  __vunmap+0xcc/0xd8
[    3.082552]  vunmap+0x24/0x30
[    3.082561]  __iounmap+0x2c/0x38
[    3.082569]  tegra_fuse_probe+0xc8/0x118
[    3.082577]  platform_drv_probe+0x50/0xa0
[    3.082585]  really_probe+0x1b0/0x288
[    3.082593]  driver_probe_device+0x58/0x100
[    3.082601]  __device_attach_driver+0x98/0xf0
[    3.082609]  bus_for_each_drv+0x64/0xc8
[    3.082616]  __device_attach+0xd8/0x130
[    3.082624]  device_initial_probe+0x10/0x18
[    3.082631]  bus_probe_device+0x90/0x98
[    3.082638]  deferred_probe_work_func+0x74/0xb0
[    3.082649]  process_one_work+0x1e0/0x318
[    3.082656]  worker_thread+0x228/0x450
[    3.082664]  kthread+0x128/0x130
[    3.082672]  ret_from_fork+0x10/0x18
[    3.082678] ---[ end trace 0810fe6ba772c1c7 ]---

Fix this by retaining the value of fuse->base until driver has
successfully probed.
Signed-off-by: NTimo Alho <talho@nvidia.com>
Acked-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit aef027db48da56b6f25d0e54c07c8401ada6ce21 ]

The virtio-rng driver uses a completion called have_data to wait for a
virtio read to be fulfilled by the hypervisor. The completion is reset
before placing a buffer on the virtio queue and completed by the virtio
callback once data has been written into the buffer.

Prior to this commit, the driver called init_completion on this
completion both during probe as well as when registering virtio buffers
as part of a hwrng read operation. The second of these init_completion
calls should instead be reinit_completion because the have_data
completion has already been inited by probe. As described in
Documentation/scheduler/completion.txt, "Calling init_completion() twice
on the same completion object is most likely a bug".

This bug was present in the initial implementation of virtio-rng in
f7f510ec ("virtio: An entropy device, as suggested by hpa"). Back
then the have_data completion was a single static completion rather than
a member of one of potentially multiple virtrng_info structs as
implemented later by 08e53fbd ("virtio-rng: support multiple
virtio-rng devices"). The original driver incorrectly used
init_completion rather than INIT_COMPLETION to reset have_data during
read.

Tested by running `head -c48 /dev/random | hexdump` within crosvm, the
Chrome OS virtual machine monitor, and confirming that the virtio-rng
driver successfully produces random bytes from the host.
Signed-off-by: NDavid Tolnay <dtolnay@gmail.com>
Tested-by: NDavid Tolnay <dtolnay@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 29856308137de1c21eda89411695f4fc6e9780ff ]

This driver sets initial frame width and height to 0x0, which is invalid.
So set it to selection rectangle bounds instead.

This is detected by v4l2-compliance detected.

Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cc437642255224e4140fed1f3e3156fc8ad91903 ]

In Python3, the result of PyModule_Create (called from
scripts/python/Perf-Trace-Util/Context.c) is not automatically added to
sys.modules.  See: https://bugs.python.org/issue4592

Below is the observed behavior without the fix:

  # ldd /usr/bin/perf | grep -i python
	libpython3.6m.so.1.0 => /usr/lib64/libpython3.6m.so.1.0 (0x00007f8e1dfb2000)

  # perf record /bin/false
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.015 MB perf.data (17 samples) ]

  # perf script -g python | cat
  generated Python script: perf-script.py

  # perf script -s ./perf-script.py
  Traceback (most recent call last):
    File "./perf-script.py", line 18, in <module>
      from perf_trace_context import *
  ModuleNotFoundError: No module named 'perf_trace_context'
  Error running python script ./perf-script.py
  #

Committer notes:

To build with python3 use:

  $ make -C tools/perf PYTHON=python3

Use a non-const variable to pass the 'name' arg to
PyImport_AppendInittab(), as python2.6 has that as 'char *', which ends
up trowing this in some environments:

   CC       /tmp/build/perf/util/parse-branch-options.o
  util/scripting-engines/trace-event-python.c: In function 'python_start_script':
  util/scripting-engines/trace-event-python.c:1520:2: error: passing argument 1 of 'PyImport_AppendInittab' discards 'const' qualifier from pointer target type [-Werror]
    PyImport_AppendInittab("perf_trace_context", initfunc);
    ^
  In file included from /usr/include/python2.6/Python.h:130:0,
                   from util/scripting-engines/trace-event-python.c:22:
  /usr/include/python2.6/import.h:54:17: note: expected 'char *' but argument is of type 'const char *'
   PyAPI_FUNC(int) PyImport_AppendInittab(char *name, void (*initfunc)(void));
                   ^
  cc1: all warnings being treated as errors
Signed-off-by: NTony Jones <tonyj@suse.de>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Fixes: 66dfdff0 ("perf tools: Add Python 3 support")
Link: http://lkml.kernel.org/r/20190124005229.16146-2-tonyj@suse.deSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 72e0b15cb24a497d7d0d4707cf51ff40c185ae8c ]

With Python3.  PyUnicode_FromStringAndSize is unsafe to call on attr and will
return NULL.  Use _PyBytes_FromStringAndSize (as with raw_buf).

Below is the observed behavior without the fix.  Note it is first necessary
to apply the prior fix (Add trace_context extension module to sys,modules):

  # ldd /usr/bin/perf | grep -i python
          libpython3.6m.so.1.0 => /usr/lib64/libpython3.6m.so.1.0 (0x00007f8e1dfb2000)

  # perf record -e raw_syscalls:sys_enter /bin/false
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.018 MB perf.data (21 samples) ]

  # perf script -g python | cat
  generated Python script: perf-script.py

  # perf script -s ./perf-script.py
  in trace_begin
  Segmentation fault (core dumped)
Signed-off-by: NTony Jones <tonyj@suse.de>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Fixes: 66dfdff0 ("perf tools: Add Python 3 support")
Link: http://lkml.kernel.org/r/20190124005229.16146-3-tonyj@suse.deSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e97a34563d18606ee5db93e495382a967f999cd4 ]

Power button suspend for some Dell models was added in:

commit 821b8536 ("platform/x86: intel-hid: Power button suspend on Dell Latitude 7275")

by checking against the power button press notification (0xCE) to report
the power button press event. The corresponding power button release
notification (0xCF) was caught and ignored to stop it from being reported
as an "unknown event" in the logs.

The missing button release event is creating issues on Android-x86, as
reported on the project mailing list for a Dell Latitude 5175 model, since
the events are expected in down/up pairs.

Report the power button release event to fix this issue.

Link: https://groups.google.com/forum/#!topic/android-x86/aSwZK9Nf9RoTested-by: NTristian Celestin <tristian.celestin@outlook.com>
Tested-by: NJérôme de Bretagne <jerome.debretagne@gmail.com>
Signed-off-by: NJérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: NMario Limonciello <mario.limonciello@dell.com>
[dvhart: corrected commit reference format per checkpatch]
Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 169e3b68cadb5775daca009ced4faf01ffd97dcf ]

On v3.10a in dual-role mode, if port is in device mode
and gadget driver isn't loaded, the OTG event interrupts don't
come through.

It seems that if the core is configured to be OTG2.0 only,
then we can't leave the DCFG.DEVSPD at Super-speed (default)
if we expect OTG to work properly. It must be set to High-speed.

Fix this issue by configuring DCFG.DEVSPD to the supported
maximum speed at gadget init. Device tree still needs to provide
correct supported maximum speed for this to work.

This issue wasn't present on v2.40a but is seen on v3.10a.
It doesn't cause any side effects on v2.40a.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b2e9e1c8810ee05c95f4d55800b8afae70ab01b4 ]

Duende Classic was produced by Solid State Logic in 2006, as a
first model of Duende DSP series. The following model, Duende Mini
was produced in 2008. They are designed to receive isochronous
packets for PCM frames via IEEE 1394 bus, perform signal processing by
downloaded program, then transfer isochronous packets for converted
PCM frames.

These two models includes the same embedded board, consists of several
ICs below:
 - Texus Instruments Inc, TSB41AB3 for physical layer of IEEE 1394 bus
 - WaveFront semiconductor, DICE II STD ASIC for link/protocol layer
 - Altera MAX 3000A CPLD for programs
 - Analog devices, SHARC ADSP-21363 for signal processing (4 chips)

This commit adds support for the two models to ALSA dice driver. Like
support for the other devices, packet streaming is just available.
Userspace applications should be developed if full features became
available; e.g. program uploader and parameter controller.

$ ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'adj': False,
                'bmc': False,
                'chip_ID': 349771402425,
                'cmc': True,
                'cyc_clk_acc': 255,
                'generation': 1,
                'imc': True,
                'isc': True,
                'link_spd': 2,
                'max_ROM': 1,
                'max_rec': 512,
                'name': '1394',
                'node_vendor_ID': 20674,
                'pmc': False},
  'root-directory': [ ['VENDOR', 20674],
                      ['DESCRIPTOR', 'Solid State Logic'],
                      ['MODEL', 112],
                      ['DESCRIPTOR', 'Duende board'],
                      [ 'NODE_CAPABILITIES',
                        { 'addressing': {'64': True, 'fix': True, 'prv': True},
                          'misc': {'int': False, 'ms': False, 'spt': True},
                          'state': { 'atn': False,
                                     'ded': False,
                                     'drq': True,
                                     'elo': False,
                                     'init': False,
                                     'lst': True,
                                     'off': False},
                          'testing': {'bas': False, 'ext': False}}],
                      [ 'UNIT',
                        [ ['SPECIFIER_ID', 20674],
                          ['VERSION', 1],
                          ['MODEL', 112],
                          ['DESCRIPTOR', 'Duende board']]]]}
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 428da2bdb05d76c48d0bd8fbfa2e4c102685be08 ]

[Why]
In order to read CRC events when CRC capture is enabled the vblank
interrput handler needs to be running for the CRTC. The handler is
enabled while there is an active vblank reference.

When running IGT tests there will often be no active vblank reference
but the test expects to read a CRC value. This is valid usage (and
works on i915 since they have a CRC interrupt handler) so the reference
to the vblank should be grabbed while capture is active.

This issue was found running:

igt@kms_plane_multiple@atomic-pipe-b-tiling-none

The pipe-b is the only one in the initial commit and was not previously
active so no vblank reference is grabbed. The vblank interrupt is
not enabled and the test times out.

[How]
Keep a reference to the vblank as long as CRC capture is enabled.
If userspace never explicitly disables it then the reference is
also dropped when removing the CRTC from the context (stream = NULL).
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Reviewed-by: NSun peng Li <Sunpeng.Li@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 81b61324922c67f73813d8a9c175f3c153f6a1c6 ]

On pseries systems, performing a partition migration can result in
altering the nodes a CPU is assigned to on the destination system. For
exampl, pre-migration on the source system CPUs are in node 1 and 3,
post-migration on the destination system CPUs are in nodes 2 and 3.

Handling the node change for a CPU can cause corruption in the slab
cache if we hit a timing where a CPUs node is changed while cache_reap()
is invoked. The corruption occurs because the slab cache code appears
to rely on the CPU and slab cache pages being on the same node.

The current dynamic updating of a CPUs node done in arch/powerpc/mm/numa.c
does not prevent us from hitting this scenario.

Changing the device tree property update notification handler that
recognizes an affinity change for a CPU to do a full DLPAR remove and
add of the CPU instead of dynamically changing its node resolves this
issue.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NMichael W. Bringmann <mwb@linux.vnet.ibm.com>
Tested-by: NMichael W. Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7ab57b76ebf632bf2231ccabe26bea33868118c6 ]

We increase the default limit for buffer memory allocation by a factor of
10 to 640K to prevent data loss when using fast serial interfaces.

For example when using RS485 without flow-control at speeds of 1Mbit/s
an upwards we've run into problems such as applications being too slow
to read out this buffer (on embedded devices based on imx53 or imx6).

If you want to write transmitted data to a slow SD card and thus have
realtime requirements, this limit can become a problem.

That shouldn't be the case and 640K buffers fix such problems for us.

This value is a maximum limit for allocation only. It has no effect
on systems that currently run fine. When transmission is slow enough
applications and hardware can keep up and increasing this limit
doesn't change anything.

It only _allows_ to allocate more than 2*64K in cases we currently fail to
allocate memory despite having some.
Signed-off-by: NManfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: NMartin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cec2b18832e26bc866bef2be22eff4e25bbc4034 ]

gpiod_get_value() gives out a warning if access to the underlying gpiochip
requires sleeping, which is common for I2C based chips:

    WARNING: CPU: 0 PID: 77 at drivers/gpio/gpiolib.c:2500 gpiod_get_value+0xd0/0x100
    Modules linked in:
    CPU: 0 PID: 77 Comm: kworker/0:2 Not tainted 4.14.0-rc3-00589-gf32897915d48-dirty #90
    Hardware name: Allwinner sun4i/sun5i Families
    Workqueue: events deferred_probe_work_func
    [<c010ec50>] (unwind_backtrace) from [<c010b784>] (show_stack+0x10/0x14)
    [<c010b784>] (show_stack) from [<c0797224>] (dump_stack+0x88/0x9c)
    [<c0797224>] (dump_stack) from [<c0125b08>] (__warn+0xe8/0x100)
    [<c0125b08>] (__warn) from [<c0125bd0>] (warn_slowpath_null+0x20/0x28)
    [<c0125bd0>] (warn_slowpath_null) from [<c037069c>] (gpiod_get_value+0xd0/0x100)
    [<c037069c>] (gpiod_get_value) from [<c03778d0>] (pwm_backlight_probe+0x238/0x508)
    [<c03778d0>] (pwm_backlight_probe) from [<c0411a2c>] (platform_drv_probe+0x50/0xac)
    [<c0411a2c>] (platform_drv_probe) from [<c0410224>] (driver_probe_device+0x238/0x2e8)
    [<c0410224>] (driver_probe_device) from [<c040e820>] (bus_for_each_drv+0x44/0x94)
    [<c040e820>] (bus_for_each_drv) from [<c040ff0c>] (__device_attach+0xb0/0x114)
    [<c040ff0c>] (__device_attach) from [<c040f4f8>] (bus_probe_device+0x84/0x8c)
    [<c040f4f8>] (bus_probe_device) from [<c040f944>] (deferred_probe_work_func+0x50/0x14c)
    [<c040f944>] (deferred_probe_work_func) from [<c013be84>] (process_one_work+0x1ec/0x414)
    [<c013be84>] (process_one_work) from [<c013ce5c>] (worker_thread+0x2b0/0x5a0)
    [<c013ce5c>] (worker_thread) from [<c0141908>] (kthread+0x14c/0x154)
    [<c0141908>] (kthread) from [<c0107ab0>] (ret_from_fork+0x14/0x24)

This was missed in commit 0c9501f8 ("backlight: pwm_bl: Handle gpio
that can sleep"). The code was then moved to a separate function in
commit 7613c922 ("backlight: pwm_bl: Move the checks for initial power
state to a separate function").

The only usage of gpiod_get_value() is during the probe stage, which is
safe to sleep in. Switch to gpiod_get_value_cansleep().

Fixes: 0c9501f8 ("backlight: pwm_bl: Handle gpio that can sleep")
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Acked-by: NDaniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 51bee5abeab2058ea5813c5615d6197a23dbf041 ]

The only user of cgroup_subsys->free() callback is pids_cgrp_subsys which
needs pids_free() to uncharge the pid.

However, ->free() is called from __put_task_struct()->cgroup_free() and this
is too late. Even the trivial program which does

	for (;;) {
		int pid = fork();
		assert(pid >= 0);
		if (pid)
			wait(NULL);
		else
			exit(0);
	}

can run out of limits because release_task()->call_rcu(delayed_put_task_struct)
implies an RCU gp after the task/pid goes away and before the final put().

Test-case:

	mkdir -p /tmp/CG
	mount -t cgroup2 none /tmp/CG
	echo '+pids' > /tmp/CG/cgroup.subtree_control

	mkdir /tmp/CG/PID
	echo 2 > /tmp/CG/PID/pids.max

	perl -e 'while ($p = fork) { wait; } $p // die "fork failed: $!\n"' &
	echo $! > /tmp/CG/PID/cgroup.procs

Without this patch the forking process fails soon after migration.

Rename cgroup_subsys->free() to cgroup_subsys->release() and move the callsite
into the new helper, cgroup_release(), called by release_task() which actually
frees the pid(s).
Reported-by: NHerton R. Krzesinski <hkrzesin@redhat.com>
Reported-by: NJan Stancek <jstancek@redhat.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit eddd0b332304d554ad6243942f87c2fcea98c56b ]

The ppc64 specific implementation of the reliable stacktracer,
save_stack_trace_tsk_reliable(), bails out and reports an "unreliable
trace" whenever it finds an exception frame on the stack. Stack frames
are classified as exception frames if the STACK_FRAME_REGS_MARKER
magic, as written by exception prologues, is found at a particular
location.

However, as observed by Joe Lawrence, it is possible in practice that
non-exception stack frames can alias with prior exception frames and
thus, that the reliable stacktracer can find a stale
STACK_FRAME_REGS_MARKER on the stack. It in turn falsely reports an
unreliable stacktrace and blocks any live patching transition to
finish. Said condition lasts until the stack frame is
overwritten/initialized by function call or other means.

In principle, we could mitigate this by making the exception frame
classification condition in save_stack_trace_tsk_reliable() stronger:
in addition to testing for STACK_FRAME_REGS_MARKER, we could also take
into account that for all exceptions executing on the kernel stack
  - their stack frames's backlink pointers always match what is saved
    in their pt_regs instance's ->gpr[1] slot and that
  - their exception frame size equals STACK_INT_FRAME_SIZE, a value
    uncommonly large for non-exception frames.

However, while these are currently true, relying on them would make
the reliable stacktrace implementation more sensitive towards future
changes in the exception entry code. Note that false negatives, i.e.
not detecting exception frames, would silently break the live patching
consistency model.

Furthermore, certain other places (diagnostic stacktraces, perf, xmon)
rely on STACK_FRAME_REGS_MARKER as well.

Make the exception exit code clear the on-stack
STACK_FRAME_REGS_MARKER for those exceptions running on the "normal"
kernel stack and returning to kernelspace: because the topmost frame
is ignored by the reliable stack tracer anyway, returns to userspace
don't need to take care of clearing the marker.

Furthermore, as I don't have the ability to test this on Book 3E or 32
bits, limit the change to Book 3S and 64 bits.

Fixes: df78d3f6 ("powerpc/livepatch: Implement reliable stack tracing for the consistency model")
Reported-by: NJoe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: NNicolai Stange <nstange@suse.de>
Signed-off-by: NJoe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8184d44c9a577a2f1842ed6cc844bfd4a9981d8e ]

Use recently introduced bpf_probe_prog_type() to skip tests in the
test_verifier() if bpf_verify_program() fails. The skipped test is
indicated in the output.

Example:

...
679/p bpf_get_stack return R0 within range SKIP (unsupported program
type 5)
680/p ld_abs: invalid op 1 OK
...
Summary: 863 PASSED, 165 SKIPPED, 3 FAILED
Signed-off-by: NStanislav Fomichev <sdf@google.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 116bfa96a255123ed209da6544f74a4f2eaca5da ]

Compiling with W=1 generates warnings:

  CC      kernel/bpf/core.o
kernel/bpf/core.c:721:12: warning: no previous prototype for ?bpf_jit_alloc_exec_limit? [-Wmissing-prototypes]
  721 | u64 __weak bpf_jit_alloc_exec_limit(void)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~
kernel/bpf/core.c:757:14: warning: no previous prototype for ?bpf_jit_alloc_exec? [-Wmissing-prototypes]
  757 | void *__weak bpf_jit_alloc_exec(unsigned long size)
      |              ^~~~~~~~~~~~~~~~~~
kernel/bpf/core.c:762:13: warning: no previous prototype for ?bpf_jit_free_exec? [-Wmissing-prototypes]
  762 | void __weak bpf_jit_free_exec(void *addr)
      |             ^~~~~~~~~~~~~~~~~

All three are weak functions that archs can override, provide
proper prototypes for when a new arch provides their own.
Signed-off-by: NValdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 058fdecc6de7cdecbf4c59b851e80eb2d6c5295f ]

When a new I/O request arrives for a bfq_queue, say Q, bfq checks
whether that request is close to
(a) the head request of some other queue waiting to be served, or
(b) the last request dispatched for the in-service queue (in case Q
itself is not the in-service queue)

If a queue, say Q2, is found for which the above condition holds, then
bfq merges Q and Q2, to hopefully get a more sequential I/O in the
resulting merged queue, and thus a possibly higher throughput.

Case (b) is checked by comparing the new request for Q with the last
request dispatched, assuming that the latter necessarily belonged to the
in-service queue. Unfortunately, this assumption is no longer always
correct, since commit d0edc2473be9 ("block, bfq: inject other-queue I/O
into seeky idle queues on NCQ flash").

When the assumption does not hold, queues that must not be merged may be
merged, causing unexpected loss of control on per-queue service
guarantees.

This commit solves this problem by adding an extra field, which stores
the actual last request dispatched for the in-service queue, and by
using this new field to correctly check case (b).
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>