This mirrors the blk-mq capabilities to allocate extra drivers-specific
data behind struct request by setting a cmd_size field, as well as having
a constructor / destructor for it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

We ran into a funky issue, where someone doing 256K buffered reads saw
128K requests at the device level.  Turns out it is read-ahead capping
the request size, since we use 128K as the default setting.  This
doesn't make a lot of sense - if someone is issuing 256K reads, they
should see 256K reads, regardless of the read-ahead setting, if the
underlying device can support a 256K read in a single command.

This patch introduces a bdi hint, io_pages.  This is the soft max IO
size for the lower level, I've hooked it up to the bdev settings here.
Read-ahead is modified to issue the maximum of the user request size,
and the read-ahead max size, but capped to the max request size on the
device side.  The latter is done to avoid reading ahead too much, if the
application asks for a huge read.  With this patch, the kernel behaves
like the application expects.

Link: http://lkml.kernel.org/r/1479498073-8657-1-git-send-email-axboe@fb.comSigned-off-by: NJens Axboe <axboe@fb.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds a new block layer operation to zero out a range of
LBAs. This allows to implement zeroing for devices that don't use
either discard with a predictable zero pattern or WRITE SAME of zeroes.
The prominent example of that is NVMe with the Write Zeroes command,
but in the future, this should also help with improving the way
zeroing discards work. For this operation, suitable entry is exported in
sysfs which indicate the number of maximum bytes allowed in one
write zeroes operation by the device.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently there's no way to enable wbt if it's not enabled in the
kernel config by default for a device. Allow a write to the
'wbt_lat_usec' queue sysfs file to enable wbt.

This is useful for both the kernel config case, but also if the
device is CFQ managed and it was turned off by default.
Signed-off-by: NJens Axboe <axboe@fb.com>

Allow a write of '-1' to reset the default latency target for
a given device. This removes knowledge of the different default
settings for rotational vs non-rotational from user space.
Signed-off-by: NJens Axboe <axboe@fb.com>

The previous commit introduced the hybrid sleep/poll mode. Take
that one step further, and use the completion latencies to
automatically sleep for half the mean completion time. This is
a good approximation.

This changes the 'io_poll_delay' sysfs file a bit to expose the
various options. Depending on the value, the polling code will
behave differently:

-1	Never enter hybrid sleep mode
 0	Use half of the completion mean for the sleep delay
>0	Use this specific value as the sleep delay
Signed-off-by: NJens Axboe <axboe@fb.com>
Tested-By: NStephen Bates <sbates@raithlin.com>
Reviewed-By: NStephen Bates <sbates@raithlin.com>

This patch enables a hybrid polling mode. Instead of polling after IO
submission, we can induce an artificial delay, and then poll after that.
For example, if the IO is presumed to complete in 8 usecs from now, we
can sleep for 4 usecs, wake up, and then do our polling. This still puts
a sleep/wakeup cycle in the IO path, but instead of the wakeup happening
after the IO has completed, it'll happen before. With this hybrid
scheme, we can achieve big latency reductions while still using the same
(or less) amount of CPU.
Signed-off-by: NJens Axboe <axboe@fb.com>
Tested-By: NStephen Bates <sbates@raithlin.com>
Reviewed-By: NStephen Bates <sbates@raithlin.com>

Again a leftover from when the throttling code was generic. Now that we
just have the block user, get rid of the stat ops and indirections.
Signed-off-by: NJens Axboe <axboe@fb.com>

Enable throttling of buffered writeback to make it a lot
more smooth, and has way less impact on other system activity.
Background writeback should be, by definition, background
activity. The fact that we flush huge bundles of it at the time
means that it potentially has heavy impacts on foreground workloads,
which isn't ideal. We can't easily limit the sizes of writes that
we do, since that would impact file system layout in the presence
of delayed allocation. So just throttle back buffered writeback,
unless someone is waiting for it.

The algorithm for when to throttle takes its inspiration in the
CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors
the minimum latencies of requests over a window of time. In that
window of time, if the minimum latency of any request exceeds a
given target, then a scale count is incremented and the queue depth
is shrunk. The next monitoring window is shrunk accordingly. Unlike
CoDel, if we hit a window that exhibits good behavior, then we
simply increment the scale count and re-calculate the limits for that
scale value. This prevents us from oscillating between a
close-to-ideal value and max all the time, instead remaining in the
windows where we get good behavior.

Unlike CoDel, blk-wb allows the scale count to to negative. This
happens if we primarily have writes going on. Unlike positive
scale counts, this doesn't change the size of the monitoring window.
When the heavy writers finish, blk-bw quickly snaps back to it's
stable state of a zero scale count.

The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency
target to me met. It defaults to 2 msec for non-rotational storage, and
75 msec for rotational storage. Setting this value to '0' disables
blk-wb. Generally, a user would not have to touch this setting.

We don't enable WBT on devices that are managed with CFQ, and have
a non-root block cgroup attached. If we have a proportional share setup
on this particular disk, then the wbt throttling will interfere with
that. We don't have a strong need for wbt for that case, since we will
rely on CFQ doing that for us.
Signed-off-by: NJens Axboe <axboe@fb.com>

For legacy block, we simply track them in the request queue. For
blk-mq, we track them on a per-sw queue basis, which we can then
sum up through the hardware queues and finally to a per device
state.

The stats are tracked in, roughly, 0.1s interval windows.

Add sysfs files to display the stats.

The feature is off by default, to avoid any extra overhead. In-kernel
users of it can turn it on by setting QUEUE_FLAG_STATS in the queue
flags. We currently don't turn it on if someone just reads any of
the stats files, that is something we could add as well.
Signed-off-by: NJens Axboe <axboe@fb.com>

The queue limits already have a 'chunk_sectors' setting, so
we should be presenting it via sysfs.
Signed-off-by: NHannes Reinecke <hare@suse.de>

[Damien: Updated Documentation/ABI/testing/sysfs-block]
Signed-off-by: NDamien Le Moal <damien.lemoal@hgst.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NShaun Tancheff <shaun.tancheff@seagate.com>
Tested-by: NShaun Tancheff <shaun.tancheff@seagate.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Add the zoned queue limit to indicate the zoning model of a block device.
Defined values are 0 (BLK_ZONED_NONE) for regular block devices,
1 (BLK_ZONED_HA) for host-aware zone block devices and 2 (BLK_ZONED_HM)
for host-managed zone block devices. The standards defined drive managed
model is not defined here since these block devices do not provide any
command for accessing zone information. Drive managed model devices will
be reported as BLK_ZONED_NONE.

The helper functions blk_queue_zoned_model and bdev_zoned_model return
the zoned limit and the functions blk_queue_is_zoned and bdev_is_zoned
return a boolean for callers to test if a block device is zoned.

The zoned attribute is also exported as a string to applications via
sysfs. BLK_ZONED_NONE shows as "none", BLK_ZONED_HA as "host-aware" and
BLK_ZONED_HM as "host-managed".
Signed-off-by: NDamien Le Moal <damien.lemoal@hgst.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NShaun Tancheff <shaun.tancheff@seagate.com>
Tested-by: NShaun Tancheff <shaun.tancheff@seagate.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Enable devices without a gendisk instance to register itself with blk-mq
and expose the associated multi-queue sysfs entries.
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@fb.com>

Provides the ability to identify DAX enabled devices in userspace.
Signed-off-by: NYigal Korman <yigal@plexistor.com>
Signed-off-by: NToshi Kani <toshi.kani@hpe.com>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Add an internal helper and flag for setting whether a queue has
write back caching, or write through (or none). Add a sysfs file
to show this as well, and make it changeable from user space.

This will replace the (awkward) blk_queue_flush() interface that
drivers currently use to inform the block layer of write cache state
and capabilities.
Signed-off-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We get this right for queue_discard_max_show but not max_hw_show. Follow the
same pattern as queue_discard_max_show instead so that we don't truncate.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Commit 4f258a46 ("sd: Fix maximum I/O size for BLOCK_PC requests")
had the unfortunate side-effect of removing an implicit clamp to
BLK_DEF_MAX_SECTORS for REQ_TYPE_FS requests in the block layer
code. This caused problems for some SMR drives.

Debugging this issue revealed a few problems with the existing
infrastructure since the block layer didn't know how to deal with
device-imposed limits, only limits set by the I/O controller.

 - Introduce a new queue limit, max_dev_sectors, which is used by the
   ULD to signal the maximum sectors for a REQ_TYPE_FS request.

 - Ensure that max_dev_sectors is correctly stacked and taken into
   account when overriding max_sectors through sysfs.

 - Rework sd_read_block_limits() so it saves the max_xfer and opt_xfer
   values for later processing.

 - In sd_revalidate() set the queue's max_dev_sectors based on the
   MAXIMUM TRANSFER LENGTH value in the Block Limits VPD. If this value
   is not reported, fall back to a cap based on the CDB TRANSFER LENGTH
   field size.

 - In sd_revalidate(), use OPTIMAL TRANSFER LENGTH from the Block Limits
   VPD--if reported and sane--to signal the preferred device transfer
   size for FS requests. Otherwise use BLK_DEF_MAX_SECTORS.

 - blk_limits_max_hw_sectors() is no longer used and can be removed.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93581Reviewed-by: NChristoph Hellwig <hch@lst.de>
Tested-by: sweeneygj@gmx.com
Tested-by: NArzeets <anatol.pomozov@gmail.com>
Tested-by: NDavid Eisner <david.eisner@oriel.oxon.org>
Tested-by: NMario Kicherer <dev@kicherer.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add basic support for polling for specific IO to complete. This uses
the cookie that blk-mq passes back, which enables the block layer
to pass this cookie to the driver to spin for a specific request.

This will be combined with request latency tracking, so we can make
qualified decisions about when to poll and when not to. For now, for
benchmark purposes, we add a sysfs file that controls whether polling
is enabled or not.
Signed-off-by: NJens Axboe <axboe@fb.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>

Allow pmem, and other synchronous/bio-based block drivers, to fallback
on a per-cpu reference count managed by the core for tracking queue
live/dead state.

The existing per-cpu reference count for the blk_mq case is promoted to
be used in all block i/o scenarios.  This involves initializing it by
default, waiting for it to drop to zero at exit, and holding a live
reference over the invocation of q->make_request_fn() in
generic_make_request().  The blk_mq code continues to take its own
reference per blk_mq request and retains the ability to freeze the
queue, but the check that the queue is frozen is moved to
generic_make_request().

This fixes crash signatures like the following:

 BUG: unable to handle kernel paging request at ffff880140000000
 [..]
 Call Trace:
  [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70
  [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem]
  [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem]
  [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0
  [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110
  [<ffffffff8141f966>] submit_bio+0x76/0x170
  [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160
  [<ffffffff81286e62>] submit_bh+0x12/0x20
  [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170
  [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90
  [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270
  [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30
  [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250
  [<ffffffff81303494>] ext4_put_super+0x64/0x360
  [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

bdi's are initialized in two steps, bdi_init() and bdi_register(), but
destroyed in a single step by bdi_destroy() which, for a bdi embedded
in a request_queue, is called during blk_cleanup_queue() which makes
the queue invisible and starts the draining of remaining usages.

A request_queue's user can access the congestion state of the embedded
bdi as long as it holds a reference to the queue.  As such, it may
access the congested state of a queue which finished
blk_cleanup_queue() but hasn't reached blk_release_queue() yet.
Because the congested state was embedded in backing_dev_info which in
turn is embedded in request_queue, accessing the congested state after
bdi_destroy() was called was fine.  The bdi was destroyed but the
memory region for the congested state remained accessible till the
queue got released.

a13f35e8 ("writeback: don't embed root bdi_writeback_congested in
bdi_writeback") changed the situation.  Now, the root congested state
which is expected to be pinned while request_queue remains accessible
is separately reference counted and the base ref is put during
bdi_destroy().  This means that the root congested state may go away
prematurely while the queue is between bdi_dstroy() and
blk_cleanup_queue(), which was detected by Andrey's KASAN tests.

The root cause of this problem is that bdi doesn't distinguish the two
steps of destruction, unregistration and release, and now the root
congested state actually requires a separate release step.  To fix the
issue, this patch separates out bdi_unregister() and bdi_exit() from
bdi_destroy().  bdi_unregister() is called from blk_cleanup_queue()
and bdi_exit() from blk_release_queue().  bdi_destroy() is now just a
simple wrapper calling the two steps back-to-back.

While at it, the prototype of bdi_destroy() is moved right below
bdi_setup_and_register() so that the counterpart operations are
located together.
Signed-off-by: NTejun Heo <tj@kernel.org>
Fixes: a13f35e8 ("writeback: don't embed root bdi_writeback_congested in bdi_writeback")
Cc: stable@vger.kernel.org # v4.2+
Reported-and-tested-by: NAndrey Konovalov <andreyknvl@google.com>
Link: http://lkml.kernel.org/g/CAAeHK+zUJ74Zn17=rOyxacHU18SgCfC6bsYW=6kCY5GXJBwGfQ@mail.gmail.comReviewed-by: NJan Kara <jack@suse.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The way the block layer is currently written, it goes to great lengths
to avoid having to split bios; upper layer code (such as bio_add_page())
checks what the underlying device can handle and tries to always create
bios that don't need to be split.

But this approach becomes unwieldy and eventually breaks down with
stacked devices and devices with dynamic limits, and it adds a lot of
complexity. If the block layer could split bios as needed, we could
eliminate a lot of complexity elsewhere - particularly in stacked
drivers. Code that creates bios can then create whatever size bios are
convenient, and more importantly stacked drivers don't have to deal with
both their own bio size limitations and the limitations of the
(potentially multiple) devices underneath them.  In the future this will
let us delete merge_bvec_fn and a bunch of other code.

We do this by adding calls to blk_queue_split() to the various
make_request functions that need it - a few can already handle arbitrary
size bios. Note that we add the call _after_ any call to
blk_queue_bounce(); this means that blk_queue_split() and
blk_recalc_rq_segments() don't need to be concerned with bouncing
affecting segment merging.

Some make_request_fn() callbacks were simple enough to audit and verify
they don't need blk_queue_split() calls. The skipped ones are:

 * nfhd_make_request (arch/m68k/emu/nfblock.c)
 * axon_ram_make_request (arch/powerpc/sysdev/axonram.c)
 * simdisk_make_request (arch/xtensa/platforms/iss/simdisk.c)
 * brd_make_request (ramdisk - drivers/block/brd.c)
 * mtip_submit_request (drivers/block/mtip32xx/mtip32xx.c)
 * loop_make_request
 * null_queue_bio
 * bcache's make_request fns

Some others are almost certainly safe to remove now, but will be left
for future patches.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: drbd-user@lists.linbit.com
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Jim Paris <jim@jtan.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Acked-by: NeilBrown <neilb@suse.de> (for the 'md/md.c' bits)
Acked-by: NMike Snitzer <snitzer@redhat.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
[dpark: skip more mq-based drivers, resolve merge conflicts, etc.]
Signed-off-by: NDongsu Park <dpark@posteo.net>
Signed-off-by: NMing Lin <ming.l@ssi.samsung.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Lots of devices support huge discard sizes these days. Depending
on how the device handles them internally, huge discards can
introduce massive latencies (hundreds of msec) on the device side.

We have a sysfs file, discard_max_bytes, that advertises the max
hardware supported discard size. Make this writeable, and split
the settings into a soft and hard limit. This can be set from
'discard_granularity' and up to the hardware limit.

Add a new sysfs file, 'discard_max_hw_bytes', that shows the hw
set limit.
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

With the planned cgroup writeback support, backing-dev related
declarations will be more widely used across block and cgroup;
unfortunately, including backing-dev.h from include/linux/blkdev.h
makes cyclic include dependency quite likely.

This patch separates out backing-dev-defs.h which only has the
essential definitions and updates blkdev.h to include it.  c files
which need access to more backing-dev details now include
backing-dev.h directly.  This takes backing-dev.h off the common
include dependency chain making it a lot easier to use it across block
and cgroup.

v2: fs/fat build failure fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NJens Axboe <axboe@fb.com>

cgroup aware writeback support will require exposing some of blkcg
details.  In preprataion, move block/blk-cgroup.h to
include/linux/blk-cgroup.h.  This patch is pure file move.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Because of the peculiar way that md devices are created (automatically
when the device node is opened), a new device can be created and
registered immediately after the
	blk_unregister_region(disk_devt(disk), disk->minors);
call in del_gendisk().

Therefore it is important that all visible artifacts of the previous
device are removed before this call.  In particular, the 'bdi'.

Since:
commit c4db59d3
Author: Christoph Hellwig <hch@lst.de>
    fs: don't reassign dirty inodes to default_backing_dev_info

moved the
   device_unregister(bdi->dev);
call from bdi_unregister() to bdi_destroy() it has been quite easy to
lose a race and have a new (e.g.) "md127" be created after the
blk_unregister_region() call and before bdi_destroy() is ultimately
called by the final 'put_disk', which must come after del_gendisk().

The new device finds that the bdi name is already registered in sysfs
and complains

> [ 9627.630029] WARNING: CPU: 18 PID: 3330 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5a/0x70()
> [ 9627.630032] sysfs: cannot create duplicate filename '/devices/virtual/bdi/9:127'

We can fix this by moving the bdi_destroy() call out of
blk_release_queue() (which can happen very late when a refcount
reaches zero) and into blk_cleanup_queue() - which happens exactly when the md
device driver calls it.

Then it is only necessary for md to call blk_cleanup_queue() before
del_gendisk().  As loop.c devices are also created on demand by
opening the device node, we make the same change there.

Fixes: c4db59d3Reported-by: NAzat Khuzhin <a3at.mail@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org (v4.0)
Signed-off-by: NNeilBrown <neilb@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

The kobject memory inside blk-mq hctx/ctx shouldn't have been freed
before the kobject is released because driver core can access it freely
before its release.

We can't do that in all ctx/hctx/mq_kobj's release handler because
it can be run before blk_cleanup_queue().

Given mq_kobj shouldn't have been introduced, this patch simply moves
mq's release into blk_release_queue().
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

blk-mq users are allowed to free the memory request_queue.tag_set
points at after blk_cleanup_queue() has finished but before
blk_release_queue() has started. This can happen e.g. in the SCSI
core. The SCSI core namely embeds the tag_set structure in a SCSI
host structure. The SCSI host structure is freed by
scsi_host_dev_release(). This function is called after
blk_cleanup_queue() finished but can be called before
blk_release_queue().

This means that it is not safe to access request_queue.tag_set from
inside blk_release_queue(). Hence remove the blk_sync_queue() call
from blk_release_queue(). This call is not necessary - outstanding
requests must have finished before blk_release_queue() is
called. Additionally, move the blk_mq_free_queue() call from
blk_release_queue() to blk_cleanup_queue() to avoid that struct
request_queue.tag_set gets accessed after it has been freed.

This patch avoids that the following kernel oops can be triggered
when deleting a SCSI host for which scsi-mq was enabled:

Call Trace:
 [<ffffffff8109a7c4>] lock_acquire+0xc4/0x270
 [<ffffffff814ce111>] mutex_lock_nested+0x61/0x380
 [<ffffffff812575f0>] blk_mq_free_queue+0x30/0x180
 [<ffffffff8124d654>] blk_release_queue+0x84/0xd0
 [<ffffffff8126c29b>] kobject_cleanup+0x7b/0x1a0
 [<ffffffff8126c140>] kobject_put+0x30/0x70
 [<ffffffff81245895>] blk_put_queue+0x15/0x20
 [<ffffffff8125c409>] disk_release+0x99/0xd0
 [<ffffffff8133d056>] device_release+0x36/0xb0
 [<ffffffff8126c29b>] kobject_cleanup+0x7b/0x1a0
 [<ffffffff8126c140>] kobject_put+0x30/0x70
 [<ffffffff8125a78a>] put_disk+0x1a/0x20
 [<ffffffff811d4cb5>] __blkdev_put+0x135/0x1b0
 [<ffffffff811d56a0>] blkdev_put+0x50/0x160
 [<ffffffff81199eb4>] kill_block_super+0x44/0x70
 [<ffffffff8119a2a4>] deactivate_locked_super+0x44/0x60
 [<ffffffff8119a87e>] deactivate_super+0x4e/0x70
 [<ffffffff811b9833>] cleanup_mnt+0x43/0x90
 [<ffffffff811b98d2>] __cleanup_mnt+0x12/0x20
 [<ffffffff8107252c>] task_work_run+0xac/0xe0
 [<ffffffff81002c01>] do_notify_resume+0x61/0xa0
 [<ffffffff814d2c58>] int_signal+0x12/0x17
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robert Elliott <elliott@hp.com>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Alexander Gordeev <agordeev@redhat.com>
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: NJens Axboe <axboe@fb.com>

This patch supports to run one single flush machinery for
each blk-mq dispatch queue, so that:

- current init_request and exit_request callbacks can
cover flush request too, then the buggy copying way of
initializing flush request's pdu can be fixed

- flushing performance gets improved in case of multi hw-queue

In fio sync write test over virtio-blk(4 hw queues, ioengine=sync,
iodepth=64, numjobs=4, bs=4K), it is observed that througput gets
increased a lot over my test environment:
	- throughput: +70% in case of virtio-blk over null_blk
	- throughput: +30% in case of virtio-blk over SSD image

The multi virtqueue feature isn't merged to QEMU yet, and patches for
the feature can be found in below tree:

	git://kernel.ubuntu.com/ming/qemu.git  	v2.1.0-mq.4

And simply passing 'num_queues=4 vectors=5' should be enough to
enable multi queue(quad queue) feature for QEMU virtio-blk.
Suggested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Now mission of the two helpers is over, and just call
blk_alloc_flush_queue() and blk_free_flush_queue() directly.
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

These two temporary functions are introduced for holding flush
initialization and de-initialization, so that we can
introduce 'flush queue' easier in the following patch. And
once 'flush queue' and its allocation/free functions are ready,
they will be removed for sake of code readability.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

blk-mq uses percpu_ref for its usage counter which tracks the number
of in-flight commands and used to synchronously drain the queue on
freeze.  percpu_ref shutdown takes measureable wallclock time as it
involves a sched RCU grace period.  This means that draining a blk-mq
takes measureable wallclock time.  One would think that this shouldn't
matter as queue shutdown should be a rare event which takes place
asynchronously w.r.t. userland.

Unfortunately, SCSI probing involves synchronously setting up and then
tearing down a lot of request_queues back-to-back for non-existent
LUNs.  This means that SCSI probing may take above ten seconds when
scsi-mq is used.

  [    0.949892] scsi host0: Virtio SCSI HBA
  [    1.007864] scsi 0:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    1.1. PQ: 0 ANSI: 5
  [    1.021299] scsi 0:0:1:0: Direct-Access     QEMU     QEMU HARDDISK    1.1. PQ: 0 ANSI: 5
  [    1.520356] tsc: Refined TSC clocksource calibration: 2491.910 MHz

  <stall>

  [   16.186549] sd 0:0:0:0: Attached scsi generic sg0 type 0
  [   16.190478] sd 0:0:1:0: Attached scsi generic sg1 type 0
  [   16.194099] osd: LOADED open-osd 0.2.1
  [   16.203202] sd 0:0:0:0: [sda] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB)
  [   16.208478] sd 0:0:0:0: [sda] Write Protect is off
  [   16.211439] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  [   16.218771] sd 0:0:1:0: [sdb] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB)
  [   16.223264] sd 0:0:1:0: [sdb] Write Protect is off
  [   16.225682] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

This is also the reason why request_queues start in bypass mode which
is ended on blk_register_queue() as shutting down a fully functional
queue also involves a RCU grace period and the queues for non-existent
SCSI devices never reach registration.

blk-mq basically needs to do the same thing - start the mq in a
degraded mode which is faster to shut down and then make it fully
functional only after the queue reaches registration.  percpu_ref
recently grew facilities to force atomic operation until explicitly
switched to percpu mode, which can be used for this purpose.  This
patch makes blk-mq initialize q->mq_usage_counter in atomic mode and
switch it to percpu mode only once blk_register_queue() is reached.

Note that this issue was previously worked around by 0a30288d
("blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during
probe") for v3.17.  The temp fix was reverted in preparation of adding
persistent atomic mode to percpu_ref by 9eca8046 ("Revert "blk-mq,
percpu_ref: implement a kludge for SCSI blk-mq stall during probe"").
This patch and the prerequisite percpu_ref changes will be merged
during v3.18 devel cycle.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NChristoph Hellwig <hch@infradead.org>
Link: http://lkml.kernel.org/g/20140919113815.GA10791@lst.de
Fixes: add703fd ("blk-mq: use percpu_ref for mq usage count")
Reviewed-by: NKent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>

When a queue is registered, the block layer turns off the bypass
setting (because bypass is enabled when the queue is created).  This
doesn't work well for queues that are unregistered and then registered
again; we get a WARNING because of the unbalanced calls to
blk_queue_bypass_end().

This patch fixes the problem by making blk_register_queue() call
blk_queue_bypass_end() only the first time the queue is registered.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NTejun Heo <tj@kernel.org>
CC: James Bottomley <James.Bottomley@HansenPartnership.com>
CC: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, both blk_queue_bypass_start() and blk_mq_freeze_queue()
skip queue draining if bypass_depth was already above zero.  The
assumption is that the one which bumped the bypass_depth should have
performed draining already; however, there's nothing which prevents a
new instance of bypassing/freezing from starting before the previous
one finishes draining.  The current code may allow the later
bypassing/freezing instances to complete while there still are
in-flight requests which haven't finished draining.

Fix it by draining regardless of bypass_depth.  We still skip draining
from blk_queue_bypass_start() while the queue is initializing to avoid
introducing excessive delays during boot.  INIT_DONE setting is moved
above the initial blk_queue_bypass_end() so that bypassing attempts
can't slip inbetween.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

The percpu counter is only used for blk-mq, so move
its allocation and free inside blk-mq, and don't
allocate it for legacy queue device.
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

For request_fn based devices, the block layer exports a 'nr_requests'
file through sysfs to allow adjusting of queue depth on the fly.
Currently this returns -EINVAL for blk-mq, since it's not wired up.
Wire this up for blk-mq, so that it now also always dynamic
adjustments of the allowed queue depth for any given block device
managed by blk-mq.
Signed-off-by: NJens Axboe <axboe@fb.com>

Witch to using a preallocated flush_rq for blk-mq similar to what's done
with the old request path.  This allows us to set up the request properly
with a tag from the actually allowed range and ->rq_disk as needed by
some drivers.  To make life easier we also switch to dynamic allocation
of ->flush_rq for the old path.

This effectively reverts most of

    "blk-mq: fix for flush deadlock"

and

    "blk-mq: Don't reserve a tag for flush request"
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

blk_mq_free_queue() is called from release handler of
queue kobject, so it needn't be called from drivers.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We've switched over every architecture that supports SMP to it, so
remove the new useless config variable.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Linux currently has two models for block devices:

- The classic request_fn based approach, where drivers use struct
  request units for IO. The block layer provides various helper
  functionalities to let drivers share code, things like tag
  management, timeout handling, queueing, etc.

- The "stacked" approach, where a driver squeezes in between the
  block layer and IO submitter. Since this bypasses the IO stack,
  driver generally have to manage everything themselves.

With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.

The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.

This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.

blk-mq provides various helper functions, which include:

- Scalable support for request tagging. Most devices need to
  be able to uniquely identify a request both in the driver and
  to the hardware. The tagging uses per-cpu caches for freed
  tags, to enable cache hot reuse.

- Timeout handling without tracking request on a per-device
  basis. Basically the driver should be able to get a notification,
  if a request happens to fail.

- Optional support for non 1:1 mappings between issue and
  submission queues. blk-mq can redirect IO completions to the
  desired location.

- Support for per-request payloads. Drivers almost always need
  to associate a request structure with some driver private
  command structure. Drivers can tell blk-mq this at init time,
  and then any request handed to the driver will have the
  required size of memory associated with it.

- Support for merging of IO, and plugging. The stacked model
  gets neither of these. Even for high IOPS devices, merging
  sequential IO reduces per-command overhead and thus
  increases bandwidth.

For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).

Contributions in this patch from the following people:

Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>