This patch (as603) makes a few small fixes to the driver core:

Change spin_lock_irq for a klist lock to spin_lock;

Fix reference count leaks;

Minor spelling and formatting changes.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

bus_rescan_devices_helper() does not hold the dev->sem when it checks for
!dev->driver().  device_attach() holds the sem, but calls again
device_bind_driver() even when dev->driver is set.

What happens is that a first device_attach() call (module insertion time)
is on the way binding the device to a driver.  Another thread calls
bus_rescan_devices().  Now when bus_rescan_devices_helper() checks for
dev->driver it is still NULL 'cos the the prior device_attach() is not yet
finished.  But as soon as the first one releases the dev->sem the second
device_attach() tries to rebind the already bound device again.
device_bind_driver() does this blindly which leads to a corrupt
driver->klist_devices list (the device links itself, the head points to the
device).  Later a call to device_release_driver() sets dev->driver to NULL
and breaks the link it has to itself on knode_driver.  Rmmoding the driver
later calls driver_detach() which leads to an endless loop 'cos the list
head in klist_devices still points to the device.  And since dev->driver is
NULL it's stuck with the same device forever.  Boom.  And rmmod hangs.

Very easy to reproduce with new-style pcmcia and a 16bit card.  Just loop
modprobe <pcmcia-modules> ;cardctl eject; rmmod <card driver, pcmcia
modules>.

Easiest fix is to check if the device is already bound to a driver in
device_bind_driver().  This avoids the double binding.
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

at the moment, the list_head semantics are

list_add(node, head)

whereas current klist semantics are

klist_add(head, node)

This is bound to cause confusion, and since klist is the newcomer, it
should follow the list_head semantics.

I also added missing include guards to klist.h
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds a single file, "bind", to the sysfs directory of every driver
registered with the driver core.  To bind a device to a driver, write
the bus id of the device you wish to bind to that specific driver to the
"bind" file (remember to not add a trailing \n).  If that bus id matches
a device on that bus, and it does not currently have a driver bound to
it, the probe sequence will be initiated with that driver and device.

Note, this requires that the driver itself be willing and able to accept
that device (usually through a device id type table).  This patch does
not make it possible to override the driver's id table.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The error handling in bus_add_device() and device_attach() is simply
non-existing. This patch propagates any error from device_attach to
the upper layers to allow for a proper recovery.

From: Hannes Reinecke <hare@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch is intended for your "driver" tree.  It fixes several subtle
races in driver_detach() and device_release_driver() in the driver-model
core.

The major change is to use klist_remove() rather than klist_del() when
taking a device off its driver's list.  There's no other way to guarantee
that the list pointers will be updated before some other driver binds to
the device.  For this to work driver_detach() can't use a klist iterator,
so the loop over the devices must be written out in full.  In addition the
patch protects against the possibility that, when a driver and a device
are unregistered at the same time, one may be unloaded from memory before
the other is finished using it.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There's no check to see if the device is already bound to a driver, which
could do bad things.  The first thing to go wrong is that it will try to match
a driver with a device already bound to one.  In some cases (it appears with
USB with drivers/usb/core/usb.c::usb_match_id()), some drivers will match a
device based on the class type, so it would be common (especially for HID
devices) to match a device that is already bound.

The fun comes when ->probe() is called, it fails, then
driver_probe_device() does this:

	dev->driver = NULL;

Later on, that pointer could be be dereferenced without checking and cause
hell to break loose.

This problem could be nasty. It's very hardware dependent, since some
devices could have a different set of matching qualifiers than others.

Now, I don't quite see exactly where/how you were getting that crash.
You're dereferencing bad memory, but I'm not sure which pointer was bad
and where it came from, but it could have come from a couple of different
places.

The patch below will hopefully fix it all up for you. It's against
2.6.12-rc2-mm1, and does the following:

- Move logic to driver_probe_device() and comments uncommon returns:
  1 - If device is bound
  0 - If device not bound, and no error
  error - If there was an error.

- Move locking to caller of that function, since we want to lock a
  device for the entire time we're trying to bind it to a driver (to
  prevent against a driver being loaded at the same time).

- Update __device_attach() and __driver_attach() to do that locking.

- Check if device is already bound in __driver_attach()

- Update the converse device_release_driver() so it locks the device
  around all of the operations.

- Mark driver_probe_device() as static and remove export. It's an
  internal function, it should stay that way, and there are no other
  callers. If there is ever a need to export it, we can audit it as
  necessary.
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Also stops looping over the lists when a match is found.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de

- Can't wait on removing the current item in the list (the positive refcount *because*
  we are using it causes it to deadlock).
Signed-off-by: NPatrick Mochel <mochel@digitalimplant.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- Now possible, since the lists are locked using the klist lock and not the
  global rwsem.
Signed-off-by: NPatrick Mochel <mochel@digitalimplant.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- Use it in driver_for_each_device() instead of the regular list_head and stop using
  the bus's rwsem for protection.
- Use driver_for_each_device() in driver_detach() so we don't deadlock on the
  bus's rwsem.
- Remove ->devices.
- Move klist access and sysfs link access out from under device's semaphore, since
  they're synchronized through other means.
Signed-off-by: NPatrick Mochel <mochel@digitalimplant.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This relocates the driver binding/unbinding code to drivers/base/dd.c. This is done
for two reasons: One, it's not code related to the bus_type itself; it uses some from
that, some from devices, and some from drivers. And Two, it will make it easier to do
some of the upcoming lock removal on that code..
Signed-off-by: NPatrick Mochel <mochel@digitalimplant.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>