- 16 2月, 2014 1 次提交
-
-
由 Kevin Hao 提交于
Currently, of_match_node compares each given match against all node's compatible strings with of_device_is_compatible. To achieve multiple compatible strings per node with ordering from specific to generic, this requires given matches to be ordered from specific to generic. For most of the drivers this is not true and also an alphabetical ordering is more sane there. Therefore, this patch introduces a function to match each of the node's compatible strings against all given compatible matches without type and name first, before checking the next compatible string. This implies that node's compatibles are ordered from specific to generic while given matches can be in any order. If we fail to find such a match entry, then fall-back to the old method in order to keep compatibility. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: NKevin Hao <haokexin@gmail.com> Tested-by: NStephen Chivers <schivers@csc.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
- 15 2月, 2014 8 次提交
-
-
由 Wolfram Sang 提交于
Because the offload mechanism can fall back to a standard transfer, having two seperate initialization states is unfortunate. Let's just have one state which does things consistently. This fixes a bug where some preparation was missing when the fallback happened. And it makes the code much easier to follow. To implement this, we put the check if offload is possible at the top of the offload setup function. Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Tested-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Cc: stable@vger.kernel.org # v3.12+ Fixes: 930ab3d4 (i2c: mv64xxx: Add I2C Transaction Generator support)
-
由 Kevin Hao 提交于
This reverts commit 10535314. Stephen Chivers reported this is broken as we will get a match entry '.type = "serial"' instead of the '.compatible = "ns16550"' in the following scenario: serial0: serial@4500 { compatible = "fsl,ns16550", "ns16550"; } struct of_device_id of_platform_serial_table[] = { { .compatible = "ns8250", .data = (void *)PORT_8250, }, { .compatible = "ns16450", .data = (void *)PORT_16450, }, { .compatible = "ns16550a", .data = (void *)PORT_16550A, }, { .compatible = "ns16550", .data = (void *)PORT_16550, }, { .compatible = "ns16750", .data = (void *)PORT_16750, }, { .compatible = "ns16850", .data = (void *)PORT_16850, }, ... { .type = "serial", .data = (void *)PORT_UNKNOWN, }, { /* end of list */ }, }; So just revert this patch, we will use another implementation to find the best compatible match in a follow-on patch. Reported-by: NStephen N Chivers <schivers@csc.com.au> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Greg Kroah-Hartman 提交于
This reverts commit f0de8e04, it is incorrect, a future patch will fix this up properly. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Devesh Sharma 提交于
We should use rdma_vlan_dev_real_dev() instead of using vlan_dev_real_dev() when building the GID table for a vlan interface. Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Devesh Sharma 提交于
Use correct value for obtaining traffic class from device response for Query QP request. Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com> Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Dan Carpenter 提交于
We use "tx_desc" again after we free it. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Roi Dayan 提交于
Fix a possible NULL pointer dereference in disconnection flow. This can happen if the target disconnected/rejected the connection request, e.g before the binding stage between iscsi connection to the transport connection. Signed-off-by: NAlex Tabachnik <alext@mellanox.com> Signed-off-by: NRoi Dayan <roid@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Upinder Malhi 提交于
Error reported at http://marc.info/?l=linux-rdma&m=138995755801039&w=2 Fix short to int cast for big endian systems. Signed-off-by: NUpinder Malhi <umalhi@cisco.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 14 2月, 2014 24 次提交
-
-
由 Borislav Petkov 提交于
We're using edac_mc_workq_setup() both on the init path, when we load an edac driver and when we change the polling period (edac_mc_reset_delay_period) through /sys/.../edac_mc_poll_msec. On that second path we don't need to init the workqueue which has been initialized already. Thanks to Tejun for workqueue insights. Signed-off-by: NBorislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com Cc: <stable@vger.kernel.org>
-
由 Borislav Petkov 提交于
Sanitize code even more to accept unsigned longs only and to not allow polling intervals below 1 second as this is unnecessary and doesn't make much sense anyway for polling errors. Signed-off-by: NBorislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com Cc: Doug Thompson <dougthompson@xmission.com> Cc: <stable@vger.kernel.org>
-
由 Denis Carikli 提交于
Without that patch, a user can't select the imxfb driver when the i.MX25 and/or the i.MX27 device tree board are selected and that no boards that selects IMX_HAVE_PLATFORM_IMX_FB are compiled in. Cc: Eric Bénard <eric@eukrea.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: NDenis Carikli <denis@eukrea.com> Acked-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Sachin Kamat 提交于
Enable S6E8AX0 LCD driver only if LCD_CLASS_DEVICE is a built-in driver. Else we get the following errors due to missing symbols: drivers/built-in.o: In function `s6e8ax0_probe': :(.text+0x51aec): undefined reference to `lcd_device_register' :(.text+0x51c44): undefined reference to `lcd_device_unregister' Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Eli Cohen 提交于
Remove Kconfig dependency of mlx5_ib/mlx5_core on X86, since there is no such dependency in reality. Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Doug Anderson 提交于
The ntc thermistor code was doing math whose temporary result might have overflowed 32-bits. We need some casts in there to make it safe. In one example I found: - pullup_uV: 1800000 - result of iio_read_channel_raw: 3226 - 1800000 * 3226 => 0x15a1cbc80 Signed-off-by: NDoug Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Mike Marciniszyn 提交于
Research has shown that commit a77fcf89 ("IB/qib: Use a single txselect module parameter for serdes tuning") missed a key serdes init sequence. This patch add that sequence. Cc: <stable@vger.kernel.org> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Kumar Sanghvi 提交于
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Moni Shoua 提交于
For userspace RoCE UD QPs we need to know the GID format that the kernel uses, e.g when working over older kernels. For that end, add a new port capability IB_PORT_IP_BASED_GIDS and report it when query port is issued. Signed-off-by: NMoni Shoua <monis@mellanox.co.il> Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Moni Shoua 提交于
When scanning netdevices we need to check a few more conditions and cases to build the IBoE GID table properly. For example, under bonding we must make sure that when a port is down, the bond IP address isn't programmed as a GID, since doing so will cause failure with IB core flows that selects ports by GID. Signed-off-by: NMoni Shoua <monis@mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Moni Shoua 提交于
The IBoE code used to reset the GID table did it for all Ethernet ports of the device. Since the whole architecture of generating GIDs and responding to events is port-based, this is inefficient and can lead to wrong content in the GID table. Change the reset flow to be per-port. Signed-off-by: NMoni Shoua <monis@mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Moni Shoua 提交于
Updating the GID table under IBoE requires read/write from/to shared data structures. These data structures are protected with the device iboe lock. The flows that modify the GID table start from 1. Initializing the GID table 2. NETDEV events 3. INET or INET6 events This patch makes sure that the flow of initializing the GID table is consistent with the other two flows w.r.t on what step the lock is taken. Signed-off-by: NMoni Shoua <monis@mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Moni Shoua 提交于
On the one hand, the invocation of netdev_master_upper_dev_get() within mlx4_ib_scan_netdevs() must be done with rtnl lock held. On the other hand, it's wrong to call rtnl_lock() from within this function since it's also called by our netdev notifier callback. Therefore move the locking to mlx4_ib_add() so that both cases are covered. Signed-off-by: NMoni Shoua <monis@mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Moni Shoua 提交于
Make sure that for Ethernet ports, the port GID table index 0 is always occupied with a default GID of the relevant IPv6 link-local adderss. This provides better user experience for legacy applications that don't use the RDMA CM and were working on index 0 prior to the IP addressing change. Also, as GIDs are generated from IP addresses of the network devices that are associated with the port, it's basically possible that the GID table will be empty if no IP address was assigned. This doesn't comply with the IB spec section 4.1.1 "GID usage and properties". Signed-off-by: NMoni Shoua <monis@mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Petr Písař 提交于
\E[3J console code (secure clear screen) needs to update_screen(vc) in order to write-through blanks into off-screen video memory. This has been removed accidentally in 3.6 by: commit 81732c3b Author: Jean-François Moine <moinejf@free.fr> Date: Thu Sep 6 19:24:13 2012 +0200 tty vt: Fix line garbage in virtual console on command line edition Signed-off-by: NPetr Písař <petr.pisar@atlas.cz> Cc: stable <stable@vger.kernel.org> # 3.6 Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Joe Schultz 提交于
The Exar XR17V35x family of UARTs have an additional fractional divisor register (DLD) which was not being used. Calculate and set this register for these devices to reduce their baud rate error. Signed-off-by: NJoe Schultz <jschultz@xes-inc.com> Signed-off-by: NAaron Sierra <asierra@xes-inc.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
When echoes cannot be flushed to output (usually because the tty has no more write room) and L_ECHO is subsequently turned off, then when L_ECHO is turned back on, stale echoes are output. Output completed echoes regardless of the L_ECHO setting: 1. before normal writes to that tty 2. if the tty was stopped by soft flow control and is being restarted Reported-by: NMikulas Patocka <mpatocka@redhat.com> Cc: <stable@vger.kernel.org> # 3.13.x Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Qipan Li 提交于
commit 8b9ade9f coming from Viresh Kumar "tty: serial: sirfsoc: drop uart_port->lock before calling tty_flip_buffer_push()" broke sirfsoc uart driver by knic: [ 5.129122] BUG: spinlock already unlocked on CPU#0, ip6tables/1331 [ 5.132554] lock: sirfsoc_uart_ports+0x4/0x8a0, .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1 [ 5.141651] CPU: 0 PID: 1331 Comm: ip6tables Tainted: G W O 3.10.16 #3 [ 5.148866] [<c0013528>] (unwind_backtrace+0x0/0xe0) from [<c0010e70>] (show_stack+0x10/0x14) [ 5.157362] [<c0010e70>] (show_stack+0x10/0x14) from [<c01a5e68>] (do_raw_spin_unlock+0x40/0xc8) [ 5.166125] [<c01a5e68>] (do_raw_spin_unlock+0x40/0xc8) from [<c03ff8b4>] (_raw_spin_unlock+0x8/0x40) [ 5.175322] [<c03ff8b4>] (_raw_spin_unlock+0x8/0x40) from [<c0203fcc>] (sirfsoc_uart_pio_rx_chars+0xa4/0xc0) [ 5.185120] [<c0203fcc>] (sirfsoc_uart_pio_rx_chars+0xa4/0xc0) from [<c0204fb8>] (sirfsoc_rx_tmo_process_tl+0xdc/0x1e0) [ 5.195875] [<c0204fb8>] (sirfsoc_rx_tmo_process_tl+0xdc/0x1e0) from [<c0024b50>] (tasklet_action+0x8c/0xec) [ 5.205673] [<c0024b50>] (tasklet_action+0x8c/0xec) from [<c00242a8>] (__do_softirq+0xec/0x1d4) [ 5.214347] [<c00242a8>] (__do_softirq+0xec/0x1d4) from [<c0024428>] (do_softirq+0x48/0x54) [ 5.222674] [<c0024428>] (do_softirq+0x48/0x54) from [<c0024690>] (irq_exit+0x74/0xc0) [ 5.230573] [<c0024690>] (irq_exit+0x74/0xc0) from [<c000e1e8>] (handle_IRQ+0x6c/0x90) [ 5.238465] [<c000e1e8>] (handle_IRQ+0x6c/0x90) from [<c000d500>] (__irq_svc+0x40/0x70) [ 5.246446] [<c000d500>] (__irq_svc+0x40/0x70) from [<c0092e7c>] (mark_page_accessed+0xc/0x68) [ 5.255034] [<c0092e7c>] (mark_page_accessed+0xc/0x68) from [<c00a2a4c>] (unmap_single_vma+0x3bc/0x550) [ 5.264402] [<c00a2a4c>] (unmap_single_vma+0x3bc/0x550) from [<c00a3b4c>] (unmap_vmas+0x44/0x54) [ 5.273164] [<c00a3b4c>] (unmap_vmas+0x44/0x54) from [<c00a81a8>] (exit_mmap+0xc4/0x1e0) [ 5.281233] [<c00a81a8>] (exit_mmap+0xc4/0x1e0) from [<c001bb78>] (mmput+0x3c/0xdc) [ 5.288868] [<c001bb78>] (mmput+0x3c/0xdc) from [<c0021b0c>] (do_exit+0x30c/0x828) [ 5.296413] [<c0021b0c>] (do_exit+0x30c/0x828) from [<c0022dac>] (do_group_exit+0x4c/0xb0) [ 5.304653] [<c0022dac>] (do_group_exit+0x4c/0xb0) from [<c0022e20>] (__wake_up_parent+0x0/0x18) Root cause: the commit dropped uart_port->lock before calling tty_flip_buffer_push(), but in sirfsoc-uart, sirfsoc_uart_pio_rx_chars() can be called by sirfsoc_rx_tmo_process_tl(). here uart_port->lock has not been taken yet. so that caused unpaired lock/unlock. Solution: This patch is doing a quick fix for that, it adds spin_lock/unlock(&port->lock) protect to sirfsoc_uart_pio_rx_chars() in sirfsoc_rx_tmo_process_tl() to keep spin_lock/unlock in pair. Signed-off-by: NQipan Li <Qipan.Li@csr.com> Signed-off-by: NBarry Song <Baohua.Song@csr.com> Cc: stable <stable@vger.kernel.org> # 3.12 Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dmitry Eremin-Solenikov 提交于
Aparently 9865 uses standard BAR encoding scheme (unlike 99xx cards). Current pci_netmos_9900_setup() uses wrong BAR indices for the 9865 PCI device, function 2. Using standard BAR indices makes all 6 ports work for me. Thus disable the NetMos 9900 quirk for NetMos 9865 pci device. For the reference, here is the relevant part of lspci for my device: 02:07.0 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller (prog-if 02 [16550]) Subsystem: Device a000:1000 Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at ac00 [size=8] Memory at fcfff000 (32-bit, non-prefetchable) [size=4K] Memory at fcffe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial 02:07.1 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller (prog-if 02 [16550]) Subsystem: Device a000:1000 Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at a800 [size=8] Memory at fcffd000 (32-bit, non-prefetchable) [size=4K] Memory at fcffc000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial 02:07.2 Communication controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller Subsystem: Device a000:3004 Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at a400 [size=8] I/O ports at a000 [size=8] I/O ports at 9c00 [size=8] I/O ports at 9800 [size=8] Memory at fcffb000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
Commit eafbe67f, n_tty: Refactor input_available_p() by call site broke poll() when TIME_CHAR(tty) and MIN_CHAR(tty) are both 0. When TIME_CHAR and MIN_CHAR are both 0, input is available if the read_cnt is 1 (not 0). Reported-by: NEric Dumazet <edumazet@google.com> Tested-by: NEric Dumazet <edumazet@google.com> Reported-by: NStephane Eranian <eranian@google.com> Tested-by: NDavid Ahern <dsahern@gmail.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michael Grzeschik 提交于
If the gpio is not yet available we better also defer the probing in the rs485 case. Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mika Westerberg 提交于
CONFIG_PM will be set if either or both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME is set. Compiling the driver with !CONFIG_PM_SLEEP causes following compilation warnings: drivers/tty/serial/8250/8250_dw.c:404:12: warning: ‘dw8250_suspend’ defined but not used [-Wunused-function] drivers/tty/serial/8250/8250_dw.c:413:12: warning: ‘dw8250_resume’ defined but not used [-Wunused-function] Fix this by using CONFIG_PM_SLEEP instead. Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Markus Pargmann 提交于
Currently the info message about a missing wakeirq for uart is printed every time the serial driver's startup function is called. This happens multiple times and not just once. This can cause lots of extra messages at boot time, slowing things down. It is caused by commit 2a0b965c (serial: omap: Add support for optional wake-up) which was applied for v3.13-rc1. This patch moves the infomessage to the probe function to display it only once. Reported-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: stable <stable@vger.kernel.org> # 3.13 Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Matan Barak 提交于
When the device has only Ethernet ports, don't try to allocate range of steerable UD QPs since they aren't needed. This fixes an issue where mlx4 VFs tried to allocate a range of UD steerable QPs, but failed to do so. Fixes: c1c98501 ("IB/mlx4: Add support for steerable IB UD QPs") Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 13 2月, 2014 7 次提交
-
-
由 Oleg Nesterov 提交于
Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Interestingly, the raid5 code can actually prevent double initialization and hence can use the following simplified form of callback registration: register_cpu_notifier(&foobar_cpu_notifier); get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); put_online_cpus(); A hotplug operation that occurs between registering the notifier and calling get_online_cpus(), won't disrupt anything, because the code takes care to perform the memory allocations only once. So reorganize the code in raid5 this way to fix the deadlock with callback registration. Cc: linux-raid@vger.kernel.org Cc: stable@vger.kernel.org (v2.6.32+) Fixes: 36d1c647Signed-off-by: NOleg Nesterov <oleg@redhat.com> [Srivatsa: Fixed the unregister_cpu_notifier() deadlock, added the free_scratch_buffer() helper to condense code further and wrote the changelog.] Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Dirk Brandewie 提交于
Remove the reporting of energy since it does not provide any useful information about the state of the driver and will be a maintainance headache going forward since the RAPL energy units register is not architectural and subject to change between micro-architectures References: https://bugzilla.kernel.org/show_bug.cgi?id=69831 Fixes: b69880f9 (intel_pstate: Add trace point to report internal state.) Signed-off-by: NDirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Olof Johansson 提交于
Enabling some of the mvebu platforms in the multiplatform config for ARM enabled these drivers, which also triggered a bunch of warnings when LPAE is enabled (thus making phys_addr_t 64-bit). Most changes are switching printk formats, but also a bit of changes to what used to be array-based pointer arithmetic that could just be done with the address types instead. The warnings were: drivers/dma/mv_xor.c: In function 'mv_xor_tx_submit': drivers/dma/mv_xor.c:500:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'dma_addr_t' [-Wformat] drivers/dma/mv_xor.c: In function 'mv_xor_alloc_chan_resources': drivers/dma/mv_xor.c:553:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/dma/mv_xor.c:555:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/dma/mv_xor.c: In function 'mv_xor_prep_dma_memcpy': drivers/dma/mv_xor.c:584:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat] drivers/dma/mv_xor.c:584:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat] drivers/dma/mv_xor.c: In function 'mv_xor_prep_dma_xor': drivers/dma/mv_xor.c:628:2: warning: format '%u' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat] Acked-by: NVinod Koul <vinod.koul@intel.com> Acked-by: NJason Cooper <jason@lakedaemon.net> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Sagi Grimberg 提交于
Need to take into account that protection sg_list (copy-buffer) may consist of multiple entries. Changes from v0: - Changed commit description Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Jingoo Han 提交于
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Roland Dreier 提交于
The CMD_T_FAILED flag is set used in one place to record the result of a trivial test, and it is only tested once, few lines later. We might as well make the code simpler and easier to read by directly doing the test of "success" where we want to use it. Signed-off-by: NRoland Dreier <roland@purestorage.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Nicholas Bellinger 提交于
This patch fixes a memory leak for fr_desc upon failure of isert_create_fr_desc() in isert_conn_create_fastreg_pool() code. As reported by Coverity 1166659: *** CID 1166659: Resource leak (RESOURCE_LEAK) /drivers/infiniband/ulp/isert/ib_isert.c: 470 in isert_conn_create_fastreg_pool() 464 isert_conn, isert_conn->conn_fr_pool_size); 465 466 return 0; 467 468 err: 469 isert_conn_free_fastreg_pool(isert_conn); >>> CID 1166659: Resource leak (RESOURCE_LEAK) >>> Variable "fr_desc" going out of scope leaks the storage it points to. 470 return ret; 471 } 472 473 static int 474 isert_connect_request(struct rdma_cm_id *cma_id, struct rdma_cm_event *event) 475 { Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-