- 14 1月, 2016 14 次提交
-
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
A few more misc things for radeon and amdgpu for 4.5: - TTM fixes for imported buffers - amdgpu fixes to avoid -ENOMEM in CS ioctl - CZ UVD and VCE clock force options for debugging video issues - A couple of ACP prerequisites - Misc fixes * 'drm-next-4.5' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: validate duplicates first drm/amdgpu: move VM page tables to the LRU end on CS v2 drm/ttm: add ttm_bo_move_to_lru_tail function v2 drm/ttm: fix adding foreign BOs to the swap LRU drm/ttm: fix adding foreign BOs to the LRU during init v2 drm/radeon: use kobj_to_dev() drm/amdgpu: use kobj_to_dev() drm/amdgpu/cz: force vce clocks when sclks are forced drm/amdgpu/cz: force uvd clocks when sclks are forced drm/amdgpu/cz: add code to enable forcing VCE clocks drm/amdgpu/cz: add code to enable forcing UVD clocks drm/amdgpu: fix lost sync_to if scheduler is enabled. drm/amd/powerplay: fix static checker warning for return meaningless value. drm/amdgpu: add irq domain support drm/amdgpu/cgs: add an interface to access PCI resources
-
由 Christian König 提交于
Most VM BOs end up in the duplicates list, validate it first make -ENOMEM less likely. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NChunming Zhou <David1.Zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
This makes it less likely to run into an ENOMEM because VM page tables are evicted last. v2: move the BOs in the LRU tail after validation Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
This allows the drivers to move a BO to the end of the LRU without removing and adding it again. v2: Make it more robust, handle pinned and swapable BOs as well. Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
It doesn't make any sense to try to swap out imported BOs. Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
If we import a BO with an external reservation object we don't reserve/unreserve it. So we never add it to the LRU causing a possible denial of service. v2: fix typo in commit message Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Geliang Tang 提交于
Use kobj_to_dev() instead of open-coding it. Signed-off-by: NGeliang Tang <geliangtang@163.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Geliang Tang 提交于
Use kobj_to_dev() instead of open-coding it. Signed-off-by: NGeliang Tang <geliangtang@163.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
VCE DPM works similarly to SCLK DPM. Add a similar interface for VCE for forcing the VCE clocks. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
UVD DPM works similarly to SCLK DPM. Add a similar interface for UVD for forcing the UVD clocks. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Chunming Zhou 提交于
when scheduler is enabled, the semaphore isn't used at all. Signed-off-by: NChunming Zhou <David1.Zhou@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
-
由 Rex Zhu 提交于
The return value should be either negative or zero, no positive. Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 12 1月, 2016 1 次提交
-
-
由 Stephen Rothwell 提交于
Fixes: 1e4854e9 ("drm/amdgpu/powerplay: implement thermal control for tonga.") Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 11 1月, 2016 25 次提交
-
-
由 Alex Deucher 提交于
Hardware blocks on the GPU like ACP generate interrupts in the GPU interrupt controller, but are driven by a separate driver. Add an irq domain to the GPU driver so that blocks like ACP can register a Linux interrupt. Acked-by: NDave Airlie <airlied@redhat.com> Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
This provides an interface to get access to the base address of PCI resources (MMIO, DOORBELL, etc.). Only MMIO and DOORBELL are implemented right now. This is necessary to properly utilize shared drivers on platform devices. IP modules can use this interface to get the base address of the resource and add any additional offset and set the size when setting up the platform driver(s). Acked-by: NDave Airlie <airlied@redhat.com> Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
git://github.com/skeggsb/linux由 Dave Airlie 提交于
- gk20a instmem fixes / improvements - more gm10x vs gm20x differences deal with - better support for high-frequency hdmi modes - pstate control interfaces moved to debugfs - support for pcie link speed changes - misc other fixes across the board * 'linux-4.5' of git://github.com/skeggsb/linux: (50 commits) drm/nouveau/pmu: prevent falcon from acking interrupts routed to the host drm/nouveau/perf: change pcie speed on pstate change drm/nouveau/perf: add fields for pci speed and width and use it for the pstates drm/nouveau/bios/perf: parse the pci speed from the bios for tesla and newer cards drm/nouveau/pci: implement pcie speed change for kepler+ drm/nouveau/pci: implement pcie speed change for Fermi drm/nouveau/pci: implement pcie speed change for tesla drm/nouveau/pci: implement generic code for pcie speed change drm/nouveau/pci: add gk104 variant drm/nouveau/pci: add gf106 variant drm/nouveau/kms: take mode_config mutex in connector hotplug path drm/nouveau/nouveau/perfmon: add interface files for current core voltage drm/nouveau/sysfs: remove pstate interface drm/nouveau/debugfs: add copy of sysfs pstate interface ported to debugfs drm/nouveau/debugfs: we need a ctrl object for debugfs drm/nouveau/debugfs: rename functions to indicate they are used inside drm drm/nouveau/debugfs: add infrastructure to add files with other fops than only read drm/nouveau/fifo/gf100: remove references to "daemon" drm/nouveau/fb/nv50: remove references to "daemon" drm/nouveau/clk: remove references to "daemon" ...
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Karol Herbst 提交于
v2: remove error and only set link for pcie devices v6: remove check for pcie device Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
-
由 Karol Herbst 提交于
Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
-
由 Karol Herbst 提交于
Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
-
由 Karol Herbst 提交于
v2: rename functions v3: remove pcie2 accessors v6: fix alignement and line width, also remove useless code Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
-
由 Karol Herbst 提交于
v5: don't set kepler func pointers v6: fix alignment and line length
-
由 Karol Herbst 提交于
v5: don't set fermi or kepler func pointers v6: fix alignment
-
由 Karol Herbst 提交于
v2: rename and group functions v4: change copyright information move printing of pcie speeds into oneinit, rename all pcie functions to nvkm_pcie_* don't try to raise the pcie version when no higher one is supported v5: revert Copyright changes and rename nvkm_pcie_raise_version to nvkm_pcie_set_version v6: remove some useless pci_is_pcie checks and rework messages Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
-
由 Karol Herbst 提交于
v2: change email used in header v4: change Copyright information v5: revert Copyright changes Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
-
由 Karol Herbst 提交于
v2: change email used in header v4: change Copyright information v5: revert Copyright changes Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
-
由 Ben Skeggs 提交于
fdo#93634 Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
-
由 Karol Herbst 提交于
Signed-off-by: NKarol Herbst <nouveau@karolherbst.de> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Karol Herbst 提交于
Signed-off-by: NKarol Herbst <nouveau@karolherbst.de> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Karol Herbst 提交于
Signed-off-by: NKarol Herbst <nouveau@karolherbst.de> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Karol Herbst 提交于
Signed-off-by: NKarol Herbst <nouveau@karolherbst.de> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Karol Herbst 提交于
We will need our own debugfs_init and cleanup functions, because nouveau_drm isn't ready while the DRM ones are called by DRM. Signed-off-by: NKarol Herbst <nouveau@karolherbst.de> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Karol Herbst 提交于
v2: use the same object for private data as with the drm debugfs functions Signed-off-by: NKarol Herbst <nouveau@karolherbst.de> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ilia Mirkin 提交于
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
From DCB 4.1 spec. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-