- 09 7月, 2012 11 次提交
-
-
由 Peter Ujfalusi 提交于
PandaBoard uses twl6040 connected via McPDM for audio. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Peter Ujfalusi 提交于
On OMAP4 SDP the audio setup includes the twl6040 codec and digital microphones. Since OMAP4 SDP is a reference board it has all possible audio interfaces connected. This information is passed via the ti,audio-routing property. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Peter Ujfalusi 提交于
The twl6040 provides the audio and vibra support on OMAP4 SDP boards. It is connected to i2c1 bus with 0x4b address. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Peter Ujfalusi 提交于
There are devices connected to VBAT. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Peter Ujfalusi 提交于
DMIC IP is used to connect up to 6 digital microphones directly to OMAP. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Peter Ujfalusi 提交于
McPDM is used on OMAP4 based boards to communicate with an external audio codec (twl6040). Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Afzal Mohammed 提交于
Add am33xx wdt node. Signed-off-by: NAfzal Mohammed <afzal@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 AnilKumar Ch 提交于
The MMC/SD and SPI entries in this file are not tested yet. They inadvertently came into the patch because of some work in progress stuff I had in my repo. These entries should not have been sent out in the first place and I am sorry for the trouble and will be extra careful in future. Since the offending commit is not sent upstream yet, I hope this can be merged into the commit 5fc0b42a (arm/dts: Add initial DT support for AM33XX SoC family) on the devel-dt branch of linux-omap tree. Signed-off-by: NAnilKumar Ch <anilkumar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Xiao Jiang 提交于
Add device table for omap_wdt to support dt. Signed-off-by: NXiao Jiang <jgq516@gmail.com> Acked-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Xiao Jiang 提交于
If provided dt support, then skip add wdt platform device as usual. Signed-off-by: NXiao Jiang <jgq516@gmail.com> Reviewed-by: NJon Hunter <jon-hunter@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Xiao Jiang 提交于
Add wdt node to support dt. Signed-off-by: NXiao Jiang <jgq516@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 03 7月, 2012 4 次提交
-
-
由 Uri Yosef 提交于
Add Variscite OMAP4 System-On-Modeule support Signed-off-by: NUri Yosef <uri.y@variscite.com> [tony@atomide.com: updated to use disabled instead of disable] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 AnilKumar Ch 提交于
Add AM335X BeagleBone device tree source (am335x-evm.dts) file to use the am33xx.dtsi SoC file, along with the memory node information. Signed-off-by: NAnilKumar Ch <anilkumar@ti.com> Reviewed-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 AnilKumar Ch 提交于
Add AM335X EVM device tree source (am335x-evm.dts) file to use the am33xx.dtsi SoC file, along with the memory node information. Signed-off-by: NAnilKumar Ch <anilkumar@ti.com> Reviewed-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 AnilKumar Ch 提交于
Add device tree source include file for the AM33XX SoC family. An additional .dtsi file is created to describe the generic AM33XX CPU module like intc, ocp. Actual selection of available peripherals is handled in seperate .dts files using this am33xx.dtsi generic header file. Signed-off-by: NAnilKumar Ch <anilkumar@ti.com> Reviewed-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 02 7月, 2012 3 次提交
-
-
由 Vaibhav Hiremath 提交于
Add support for TWL4030, which is interfaced on i2c1 bus. Also add clock frequencies for other i2c instances (2 & 3) required for client-device exist on OMAP3EVM board. Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NBenoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Vaibhav Hiremath 提交于
Add AM3517 EVM (AM3517/05) DTS file to use the omap3.dtsi SoC file, along with memory node and basic i2c information. Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NBenoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Jon Hunter 提交于
Simple DTS file for OMAP2420H4 board adding memory information to allow device-tree testing on an OMAP2420. OMAP2420H4 board has 64MB of RAM. Verified that kernel boots with DT using a simple RAMDISK file-system on OMAP2420H4. Signed-off-by: NJon Hunter <jon-hunter@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 01 7月, 2012 9 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Another week, another batch of fixes. All are small, contained, targeted fixes for explicit problems -- mostly build and boot failures across i.MX, OMAP, Renesas/Shmobile and Samsung." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx6q: fix suspend regression caused by common clk migration ARM: OMAP4470: Fix OMAP4470 boot failure ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n ARM: shmobile: r8a7779: Route all interrupts to ARM ARM: shmobile: kzm9d: use late init machine hook ARM: shmobile: kzm9g: use late init machine hook ARM: mach-shmobile: armadillo800eva: Use late init machine hook ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: mach-shmobile: add missing GPIO IRQ configuration on mackerel ARM: mach-shmobile: Fix build when SMP is enabled and EMEV2 is not enabled ARM: shmobile: sh7372: bugfix: chclr_offset base ARM: shmobile: sh73a0: bugfix: SY-DMAC number ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL
-
由 Randy Dunlap 提交于
Fix kernel-doc warnings in printk.c: use correct parameter name. Warning(kernel/printk.c:2429): No description found for parameter 'buf' Warning(kernel/printk.c:2429): Excess function parameter 'line' description in 'kmsg_dump_get_buffer' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix kernel-doc warning. This struct member was removed in commit 87568264 ("irq: Remove irq_chip->release()") so remove its associated kernel-doc entry also. Warning(include/linux/irq.h:338): Excess struct/union/enum/typedef member 'release' description in 'irq_chip' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Olof Johansson 提交于
Merge branch 'v3.5-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.5-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL
-
由 Shawn Guo 提交于
When moving to common clk framework, the imx6q clks rom and mmdc_ch1_axi get different on/off states than old clk driver, which breaks suspend function. There might be a better way to manage these clocks, but let's takes the old clk driver approach to fix the regression first. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'omap-fixes-for-v3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: "Here's one more regression fix that I missed earlier, and a trivial fix to get omap4470 booting." * tag 'omap-fixes-for-v3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4470: Fix OMAP4470 boot failure ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux由 Linus Torvalds 提交于
Pull ACPI & Power Management patches from Len Brown. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: acpi_pad: fix power_saving thread deadlock ACPI video: Still use ACPI backlight control if _DOS doesn't exist ACPI, APEI, Avoid too much error reporting in runtime ACPI: Add a quirk for "AMILO PRO V2030" to ignore the timer overriding ACPI: Remove one board specific WARN when ignoring timer overriding ACPI: Make acpi_skip_timer_override cover all source_irq==0 cases ACPI, x86: fix Dell M6600 ACPI reboot regression via DMI ACPI sysfs.c strlen fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core由 Linus Torvalds 提交于
Pull driver Core fixes from Greg Kroah-Hartman: "Here is a number of printk() fixes, specifically a few reported by the crazy blog program that ships in SUSE releases (that's "boot log" and not "web log", it predates the general "blog" terminology by many years), and the restoration of the continuation line functionality reported by Stephen and others. Yes, the changes seem a bit big this late in the cycle, but I've been beating on them for a while now, and Stephen has even optimized it a bit, so all looks good to me. The other change in here is a Documentation update for the stable kernel rules describing how some distro patches should be backported, to hopefully drive a bit more response from the distros to the stable kernel releases. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: printk: Optimize if statement logic where newline exists printk: flush continuation lines immediately to console syslog: fill buffer with more than a single message for SYSLOG_ACTION_READ Revert "printk: return -EINVAL if the message len is bigger than the buf size" printk: fix regression in SYSLOG_ACTION_CLEAR stable: Allow merging of backports for serious user-visible performance issues
-
- 30 6月, 2012 9 次提交
-
-
由 Len Brown 提交于
Merge branches 'acpi_pad-bugzilla-42981', 'apei-bugzilla-43282', 'video-bugzilla-43168', 'bugzilla-40002' and 'bugfix-misc' into release bug fixes
-
由 Stuart Hayes 提交于
The acpi_pad driver can get stuck in destroy_power_saving_task() waiting for kthread_stop() to stop a power_saving thread. The problem is that the isolated_cpus_lock mutex is owned when destroy_power_saving_task() calls kthread_stop(), which waits for a power_saving thread to end, and the power_saving thread tries to acquire the isolated_cpus_lock when it calls round_robin_cpu(). This patch fixes the issue by making round_robin_cpu() use its own mutex. https://bugzilla.kernel.org/show_bug.cgi?id=42981 Cc: stable@vger.kernel.org Signed-off-by: NStuart Hayes <Stuart_Hayes@Dell.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Zhang Rui 提交于
This fixes a regression in 3.4-rc1 caused by commit ea9f8856 (ACPI video: Harden video bus adding.) Some platforms don't have _DOS control method, but the ACPI backlight still works. We should not invoke _DOS for these platforms. https://bugzilla.kernel.org/show_bug.cgi?id=43168 Cc: Igor Murzov <intergalactic.anonymous@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NZhang Rui <rui.zhang@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael J. Wysocki: * Fix for a bug in async suspend error code path causing parents to wait forever for their children in case of a suspend error from Mandeep Singh Baines (-stable metarial). * Fix for a suspend regression related to earlier changes in the ACPI cpuidle driver from Deepthi Dharwar. * tag 'pm-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup. PM / Sleep: Prevent waiting forever on asynchronous suspend after abort
-
由 Steven Rostedt 提交于
In reviewing Kay's fix up patch: "printk: Have printk() never buffer its data", I found two if statements that could be combined and optimized. Put together the two 'cont.len && cont.owner == current' if statements into a single one, and check if we need to call cont_add(). This also removes the unneeded double cont_flush() calls. Link: http://lkml.kernel.org/r/1340869133.876.10.camel@mopSigned-off-by: NSteven Rostedt <rostedt@goodmis.org> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc fixes from Benjamin Herrenschmidt: "Here are a few powerpc fixes. Arguably some of this should have come to you earlier but I'm only just catching up after my medical leave. Mostly these fixes regressions, a couple are long standing bugs." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries: Fix software invalidate TCE powerpc: check_and_cede_processor() never cedes powerpc/ftrace: Do not trace restore_interrupts() powerpc: Fix Section mismatch warnings in prom_init.c ppc64: fix missing to check all bits of _TIF_USER_WORK_MASK in preempt powerpc: Fix uninitialised error in numa.c powerpc: Fix BPF_JIT code to link with multiple TOCs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpufeature: Remove stray %s, add -w to mkcapflags.pl x86, cpufeature: Catch duplicate CPU feature strings x86, cpufeature: Rename X86_FEATURE_DTS to X86_FEATURE_DTHERM x86: Fix kernel-doc warnings x86, compat: Use test_thread_flag(TIF_IA32) in compat signal delivery
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull oprofile fixlet from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: oprofile: perf: use NR_CPUS instead or nr_cpumask_bits for static array
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RCU fix from Ingo Molnar. Fixes a bug introduced in this merge window by commit b1420f1c ("Make rcu_barrier() less disruptive") * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Stop rcu_do_batch() from multiplexing the "count" variable
-
- 29 6月, 2012 4 次提交
-
-
由 Kay Sievers 提交于
Continuation lines are buffered internally, intended to merge the chunked printk()s into a single record, and to isolate potentially racy continuation users from usual terminated line users. This though, has the effect that partial lines are not printed to the console in the moment they are emitted. In case the kernel crashes in the meantime, the potentially interesting printed information would never reach the consoles. Here we share the continuation buffer with the console copy logic, and partial lines are always immediately flushed to the available consoles. They are still buffered internally to improve the readability and integrity of the messages and minimize the amount of needed record headers to store. Signed-off-by: NKay Sievers <kay@vrfy.org> Tested-by: NSteven Rostedt <rostedt@goodmis.org> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michael Neuling 提交于
The following added support for powernv but broke pseries/BML: 1f1616e8 powerpc/powernv: Add TCE SW invalidation support TCE_PCI_SW_INVAL was split into FREE and CREATE flags but the tests in the pseries code were not updated to reflect this. Signed-off-by: NMichael Neuling <mikey@neuling.org> cc: stable@kernel.org [v3.3+] Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Commit f948501b ("Make hard_irq_disable() actually hard-disable interrupts") caused check_and_cede_processor to stop working. ->irq_happened will never be zero right after a hard_irq_disable so the compiler removes the call to cede_processor completely. The bug was introduced back in the lazy interrupt handling rework of 3.4 but was hidden until recently because hard_irq_disable did nothing. This issue will eventually appear in 3.4 stable since the hard_irq_disable fix is marked stable, so mark this one for stable too. Signed-off-by: NAnton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Steven Rostedt 提交于
As I was adding code that affects all archs, I started testing function tracer against PPC64 and found that it currently locks up with 3.4 kernel. I figured it was due to tracing a function that shouldn't be, so I went through the following process to bisect to find the culprit: cat /debug/tracing/available_filter_functions > t num=`wc -l t` sed -ne "1,${num}p" t > t1 let num=num+1 sed -ne "${num},$p" t > t2 cat t1 > /debug/tracing/set_ftrace_filter echo function /debug/tracing/current_tracer <failed? bisect t1, if not bisect t2> It finally came down to this function: restore_interrupts() I'm not sure why this locks up the system. It just seems to prevent scheduling from occurring. Interrupts seem to still work, as I can ping the box. But all user processes freeze. When restore_interrupts() is not traced, function tracing works fine. Cc: stable@kernel.org Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-