Patch from Lennert Buytenhek

The irq2gpio array was recently converted from an array of ints to an
array of chars (by patch 3368/1.)  However, this array contains elements
that are -1, and on ARM, the char type is unsigned by default, so this
patch broke the GPIO check in ixp4xx_set_irq_type.

Change the 'char' to be a 'signed char' to fix this.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Those also break userland regs like following.

   00000000 <sys_chown16>:
      0:	0f b7 44 24 0c       	movzwl 0xc(%esp),%eax
      5:	83 ca ff             	or     $0xffffffff,%edx
      8:	0f b7 4c 24 08       	movzwl 0x8(%esp),%ecx
      d:	66 83 f8 ff          	cmp    $0xffffffff,%ax
     11:	0f 44 c2             	cmove  %edx,%eax
     14:	66 83 f9 ff          	cmp    $0xffffffff,%cx
     18:	0f 45 d1             	cmovne %ecx,%edx
     1b:	89 44 24 0c          	mov    %eax,0xc(%esp)
     1f:	89 54 24 08          	mov    %edx,0x8(%esp)
     23:	e9 fc ff ff ff       	jmp    24 <sys_chown16+0x24>

where the tailcall at the end overwrites the incoming stack-frame.
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
[ I would _really_ like to have a way to tell gcc about calling
  conventions. The "prevent_tail_call()" macro is pretty ugly ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mthca: make a function static
  IB/ipath: Fix whitespace
  IB/ipath: Make more names static
  IB/mad: Fix RMPP version check during agent registration
  IB/srp: Remove request from list when SCSI abort succeeds

This patch makes the needlessly global mthca_update_rate() static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Make symbols that are only used in a single source file static.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Only check that RMPP version is not specified when MAD class does not
support RMPP.  Just because a class is allowed to use RMPP doesn't
mean that rmpp_version needs to be set for the MAD agent to
register. Checking this was a recent change which was too pedantic.
Signed-off-by: NHal Rosenstock <halr@voltaire.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

If a SCSI abort succeeds, then the aborted request should to be
removed from the list of pending requests.  This fixes list corruption
after an abort occurs.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

* git://git.linux-nfs.org/pub/linux/nfs-2.6:
  SUNRPC: Dead code in net/sunrpc/auth_gss/auth_gss.c
  NFS: remove needless check in nfs_opendir()
  NFS: nfs_show_stats; for_each_possible_cpu(), not NR_CPUS
  NFS: make 2 functions static
  NFS,SUNRPC: Fix compiler warnings if CONFIG_PROC_FS & CONFIG_SYSCTL are unset
  NFS: fix PROC_FS=n compile error
  VFS: Fix another open intent Oops
  RPCSEC_GSS: fix leak in krb5 code caused by superfluous kmalloc

Hi,

the coverity checker spotted that cred is always NULL
when we jump to out_err ( there is just one case, when
we fail to allocate the memory for cred )
This is Coverity ID #79
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Local variable res was initialized to 0 - no check needed here.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Convert a for-loop that explicitly references "NR_CPUS" into the
potentially more efficient for_each_possible_cpu() construct.
Signed-off-by: NJohn Hawkes <hawkes@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

fs/built-in.o: In function `nfs_show_stats':inode.c:(.text+0x15481a): undefined reference to `rpc_print_iostats'
net/built-in.o: In function `rpc_destroy_client': undefined reference to `rpc_free_iostats'
net/built-in.o: In function `rpc_clone_client': undefined reference to `rpc_alloc_iostats'
net/built-in.o: In function `rpc_new_client': undefined reference to `rpc_alloc_iostats'
net/built-in.o: In function `xprt_release': undefined reference to `rpc_count_iostats'
make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the call to nfs_intent_set_file() fails to open a file in
nfs4_proc_create(), we should return an error.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

I was sloppy when generating a previous patch; I modified the callers of
krb5_make_checksum() to allocate memory for the buffer where the result is
returned, then forgot to modify krb5_make_checksum to stop allocating that
memory itself.  The result is a per-packet memory leak.  This fixes the
problem by removing the now-superfluous kmalloc().
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] splice: fixup writeout path after ->map changes
  [PATCH] splice: offset fixes
  [PATCH] tee: link_pipe() must be careful when dropping one of the pipe locks
  [PATCH] splice: cleanup the SPLICE_F_NONBLOCK handling
  [PATCH] splice: close i_size truncate races on read

Fix return code of fb_write():

If at least 1 byte was transferred to the device, return number of bytes,
otherwise:

    - return -EFBIG - if file offset is past the maximum allowable offset or
      size is greater than framebuffer length
    - return -ENOSPC - if size is greater than framebuffer length - offset
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix modpost section mismatch warnings in savagefb driver:

WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .exit.text after 'savagefb_remove' (at offset 0x66)
WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .exit.text after 'savagefb_remove' (at offset 0x6e)
WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .text.savagefb_resume after 'savagefb_resume' (at offset 0x70)
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Marking radeon_pci_register() as __devinit clears up all section
mismatch warnings that are caused by radeon_pci_register() calling
various __devinit function.  Is there some reason not to do this?

WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x628)
WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x6b5)
WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x6bd)
WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text:radeon_probe_screens from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x7d6)
WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text:radeon_check_modes from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x7e5)
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix the following section mismatch:

WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.data: from .text.savagefb_probe after 'savagefb_probe' (at offset 0x5e2)
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From http://bugzilla.kernel.org/show_bug.cgi?id=6358

The alim15x3.c havn't been update for 3 years.  Recently when we use this
"ULI M1573" south bridge chip found that can't mount CDROM(VCD) smoothly,
must waiting for a long time.  After I check the "ULI M1573" south bridge
datasheet, I found the reason.  The reason is the "ULI M1573" version in
the Linux is "0xC7" not "0xC4" anymore So I was modified the source than it
was successed.

Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Noted by Sergei Shtylylov <sshtylyov@ru.mvista.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for the IDE device on ATI SB600
Signed-off-by: NFelix Kuehling <fkuehlin@ati.com>
Acked-by: NBartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Andrew Morton pointed out that compiler might not inline the functions
marked for inline in kprobes.  There-by allowing the insertion of probes
on these kprobes routines, which might cause recursion.

This patch removes all such inline and adds them to kprobes section
there by disallowing probes on all such routines.  Some of the routines
can even still be inlined, since these routines gets executed after the
kprobes had done necessay setup for reentrancy.
Signed-off-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Andrew Morton pointed out that compiler might not inline the functions
marked for inline in kprobes.  There-by allowing the insertion of probes
on these kprobes routines, which might cause recursion.

This patch removes all such inline and adds them to kprobes section
there by disallowing probes on all such routines.  Some of the routines
can even still be inlined, since these routines gets executed after the
kprobes had done necessay setup for reentrancy.
Signed-off-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Andrew Morton pointed out that compiler might not inline the functions
marked for inline in kprobes.  There-by allowing the insertion of probes
on these kprobes routines, which might cause recursion.

This patch removes all such inline and adds them to kprobes section
there by disallowing probes on all such routines.  Some of the routines
can even still be inlined, since these routines gets executed after the
kprobes had done necessay setup for reentrancy.
Signed-off-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Andrew Morton pointed out that compiler might not inline the functions
marked for inline in kprobes.  There-by allowing the insertion of probes
on these kprobes routines, which might cause recursion.

This patch removes all such inline and adds them to kprobes section
there by disallowing probes on all such routines.  Some of the routines
can even still be inlined, since these routines gets executed after the
kprobes had done necessay setup for reentrancy.
Signed-off-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Andrew Morton pointed out that compiler might not inline the functions
marked for inline in kprobes.  There-by allowing the insertion of probes
on these kprobes routines, which might cause recursion.

This patch removes all such inline and adds them to kprobes section
there by disallowing probes on all such routines.  Some of the routines
can even still be inlined, since these routines gets executed after the
kprobes had done necessay setup for reentrancy.
Signed-off-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The wording of two messages in drivers/pnp/manager.c is incorrect.  Fix that.
Signed-off-by: NJan Engelhardt <jengelh@gmx.de>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Randy Dunlap <rdunlap@xenotime.net>

Fix all modpost section mismatch warnings in parport_pc:

WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x230)
WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x283)
WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x3e6)
WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x400)
WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x463)
WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x488)
WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data:superios from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x54c)
WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x56a)
WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x67)
WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x9f)
WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0xa7)
WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data:cards from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x132)
WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x142)
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I was looking into random driver code and found a suspicious looking
memcpy() in drivers/char/ipmi/ipmi_bt_sm.c on 2.6.17-rc1:

	if ((size < 2) || (size > IPMI_MAX_MSG_LENGTH))
		return -1;
	...
	memcpy(bt->write_data + 3, data + 1, size - 1);

where sizeof bt->write_data is IPMI_MAX_MSG_LENGTH.  It looks like the
memcpy would overflow by 2 bytes if size == IPMI_MAX_MSG_LENGTH.  A patch
attached to limit size to (IPMI_MAX_LENGTH - 2).

Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix potential NULL pointer deref in gen_init_cpio.c spotted by coverity
checker.  This fixes coverity bug #86

Without this patch we risk dereferencing a NULL `type' in the
"if ('\n' == *type) {" line.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Replace outdated help message with a reference to README.  Update README
for make *config variants and environment variable info.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

gcc complains about __devinit in the wrong location:
drivers/char/ipmi/ipmi_si_intf.c:2205: warning: '__section__' attribute does not apply to types
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Acked-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add new line of /proc/meminfo output.

Explain the HugePage_ lines in /proc/meminfo (from Bill Irwin).

Change KB to kB since the latter is what is used in the kernel.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix the "apm: set display: Interface not engaged" error on Armada laptops
again.

Jordan said:

  I think this is fine.  It seems to me that this may be the fault of one or
  both of the APM solutions handling this situation in a non-standard way, but
  since APM is used very little on the Geode, and I have direct access to our
  BIOS folks, if this problem comes up with a customer again, we'll solve it
  from the firmware.
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Cc: "Jordan Crouse" <jordan.crouse@amd.com>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

DEBUG_MUTEX flag is on by default in current kernel configuration.

During performance testing, we saw mutex debug functions like
mutex_debug_check_no_locks_freed (called by kfree()) is expensive as it
goes through a global list of memory areas with mutex lock and do the
checking.  For benchmarks such as Volanomark and Hackbench, we have seen
more than 40% drop in performance on some platforms.  We suggest to set
DEBUG_MUTEX off by default.  Or at least do that later when we feel that
the mutex changes in the current code have stabilized.
Signed-off-by: NTim Chen <tim.c.chen@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>