Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add experimental support for the Edirol UA-101 audio/MIDI interface.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert table of pointers to mixer controls into tables
of the mixer controls. It saves about 20% of the snd-sb-common
module size reported by lsmod.

The als4000 uses part of sb16's control table.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

sizeof(share_id) is just the size of the pointer.  On the other hand,
block->share_id is an array, so its size seems more appropriate.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
expression f;
type T;
@@

*f(...,(T)x,...)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add dB scale for mixer controls. Fix dB scale for
Master Volume control.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The pin config provided by BIOS have some problems:
0x0221401f: [Jack] HP Out at Ext Front  <-- other association and sequence
0x02a19020: [Jack] Mic at Ext Front     <-- other association
0x01113014: [Jack] Speaker at Ext Rear  <-- line out (not speaker)
0x01114010: [Jack] Speaker at Ext Rear  <-- line out
0x01a19030: [Jack] Mic at Ext Rear      <-- other association
0x01111012: [Jack] Speaker at Ext Rear  <-- line out
0x01116011: [Jack] Speaker at Ext Rear  <-- line out
0x40f000f0: [N/A] Other at Ext N/A
0x40f000f0: [N/A] Other at Ext N/A
0x40f000f0: [N/A] Other at Ext N/A
0x40f000f0: [N/A] Other at Ext N/A
0x40f000f0: [N/A] Other at Ext N/A
0x01451140: [Jack] SPDIF Out at Ext Rear
0x40f000f0: [N/A] Other at Ext N/A

just overwrite it.
Signed-off-by: NAlexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move OPTi93x controls definitions to the opti93x driver
from the common wss-lib library module. These controls
are used only by the opti93x driver.

Also, fix capture source names. They are the same as
opl3sa2 names.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The als100 driver is so similar to the dt019x/als007 driver
that one driver's source can be used for both drivers with
only few changes. Merge the dt019x driver into the als100.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For codecs without EPSS support (G45/IbexPeak), the hotplug event will
be lost if the HDA is powered off during the time. After that the pin
presence detection verb returns inaccurate info.

So always power-on HDA link for !EPSS codecs.

KarL offers the fact and Takashi recommends to flag hda_bus. Thanks!
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The timer stop callback can be called from snd_timer_interrupt(), which
is called from the hrtimer callback.  Since hrtimer_cancel() waits for
the callback completion, this eventually results in a lock-up.

This patch fixes the problem by just toggling a flag at stop callback
and call hrtimer_cancel() later.
Reported-and-tested-by: NWojtek Zabolotny <W.Zabolotny@elka.pw.edu.pl>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

IbexPeak is the first Intel HDMI audio codec to support channel mapping.

Currently the outstanding problem is, the HDMI channel order do not
agree with that of ALSA.  This patch presents workaround for some
typical use cases. It gives priority to the typical ALSA surround
configurations, and defines channel mapping for them.

We may need better kernel+userspace interactive channel mapping scheme.
For example, in current scheme if user plays with the surround50 device,
the kernel is unaware of this and will still select the surround41
channel allocation and channel mapping..

Thanks to Marcin for offering good tips!
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA036-A specifies that the Audio Sample Packet (ASP) Channel Mapping
verbs apply to Digital Display Pin Complex instead of Converter.

With this fix, channel mapping is working as expected for IbexPeak.

Thanks to Marcin for pointing this out!
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA036 spec states:
  DP (Display Port) indicates whether the Pin Complex Widget supports
  connection to a Display Port sink.  Supported if set to 1. Note that
  it is possible for the pin widget to support more than one digital
  display connection type, e.g. HDMI and DP bit are both set to 1.

Also export the DP pin cap in procfs.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Note that the HBR capability only applies to HDMI pin.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch fixes an error in processing of the HP BIOS configuration to enable
GPIO based mute LED indicator control. That error causes driver to enable
such control on all HP systems with the 92HD75 IDT codecs and results in
unnecessary toggling of the GPIO on mute control manipulation.

It also adds support of the future HP BIOS configuration extension for the
named control. New configuration string has a format HP_Mute_LED_P_G
where P can be 0 or 1 and defines mute LED GPIO control state (low/high)
that corresponds to the NOT muted state of the master volume
and G is the index of the GPIO to use (0..9)

Lastly, it adds more systems to the support of the audio implementation
as found on HP B-series systems
Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There are build errors when building for some of the omap2/3 boards without
enabling sound:

sound/built-in.o:(.data+0x43bc): undefined reference to `soc_codec_dev_tlv320aic23'
sound/built-in.o:(.data+0x43cc): undefined reference to `tlv320aic23_dai'

Confused me quite a bit since the drivers that had references to the
codec weren't enabled. Turns out the Makefile was using the wrong
config option to enable them. Patch below.
Reported-by: NAnand Gadiyar <gadiyar@ti.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Use the chip->irq to check if the irq should be released so the irq is not released
if it has not been allocated.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPICA: Update version to 20091112.
  ACPICA: Add additional module-level code support
  ACPICA: Deploy new create integer interface where appropriate
  ACPICA: New internal utility function to create Integer objects
  ACPICA: Add repair for predefined methods that must return sorted lists
  ACPICA: Fix possible fault if return Package objects contain NULL elements
  ACPICA: Add post-order callback to acpi_walk_namespace
  ACPICA: Change package length error message to an info message
  ACPICA: Reduce severity of predefined repair messages, Warning to Info
  ACPICA: Update version to 20091013
  ACPICA: Fix possible memory leak for Scope ASL operator
  ACPICA: Remove possibility of executing _REG methods twice
  ACPICA: Add repair for bad _MAT buffers
  ACPICA: Add repair for bad _BIF/_BIX packages

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (41 commits)
  hwmon: (adt7475) Add VID support for the ADT7476
  hwmon: (adt7475) Add an entry in MAINTAINERS
  hwmon: (adt7475) Add support for the ADT7476
  hwmon: (adt7475) Voltage attenuators can be bypassed
  hwmon: (adt7475) Print device information on probe
  hwmon: (adt7475) Handle alternative pin functions
  hwmon: (adt7475) Move sysfs files removal to a separate function
  hwmon: (adt7475) Add support for the ADT7490
  hwmon: (adt7475) Improve device detection
  hwmon: (adt7475) Add missing static marker
  hwmon: (adt7475) Rework voltage inputs handling
  hwmon: (adt7475) Implement pwm_use_point2_pwm_at_crit
  hwmon: (adt7475) New documentation
  hwmon: (adt7475) Add support for the ADT7473
  hwmon: (f71882fg) Add support for the f71889fg (version 2)
  hwmon: (f71882fg) Fix sysfs file removal
  hwmon: (f71882fg) Cleanup sysfs attr creation 2/2
  hwmon: (f71882fg) Cleanup sysfs attr creation 1/2
  hwmon: (thmc50) Stop using I2C_CLIENT_MODULE_PARM
  hwmon: Add Freescale MC13783 ADC driver
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: ice1724 - aureon - modify WM8770 Master & DAC volume
  ALSA: hda/realtek: quirk for D945GCLF2 mainboard
  ALSA: hda - Terradici HDA controllers does not support 64-bit mode
  ALSA: document: Add direct git link to grub hda-analyzer
  ALSA: radio/sound/miro: fix build, cleanup depends/selects
  ALSA: hda - Generalize EAPD inversion check in patch_analog.c
  ASoC: Wrong variable returned on error
  ALSA: snd-usb-us122l: add product IDs of US-122MKII and US-144MKII
  ALSA: hda - Exclude unusable ADCs for ALC88x
  ALSA: hda - Add missing Line-Out and PCM switches as slave
  ALSA: hda - iMac 9,1 sound patch.
  ALSA: opti93x: set MC indirect registers base from PnP data

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits)
  Input: appletouch - give up maintainership
  Input: dm355evm_kbd - switch to using sparse keymap library
  Input: wistron_btns - switch to using sparse keymap library
  Input: add generic support for sparse keymaps
  Input: fix memory leak in force feedback core
  Input: wistron - remove identification strings from DMI table
  Input: psmouse - remove identification strings from DMI tables
  Input: atkbd - remove identification strings from DMI table
  Input: i8042 - remove identification strings from DMI tables
  DMI: allow omitting ident strings in DMI tables
  Input: psmouse - do not carry DMI data around
  Input: matrix-keypad - switch to using dev_pm_ops
  Input: keyboard - fix lack of locking when traversing handler->h_list
  Input: gpio_keys - scan gpio state at probe and resume time
  Input: keyboard - add locking around event handling
  Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controller
  Input: xpad - add two new Xbox 360 devices
  Input: polled device - do not start polling if interval is zero
  Input: polled device - schedule first poll immediately
  Input: add S3C24XX touchscreen driver
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (345 commits)
  V4L/DVB (13542): ir-keytable: Allow dynamic table change
  V4L/DVB (13541): atbm8830: replace 64-bit division and floating point usage
  V4L/DVB (13540): ir-common: Cleanup get key evdev code
  V4L/DVB (13539): ir-common: add __func__ for debug messages
  V4L/DVB (13538): ir-common: Use a dynamic keycode table
  V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocation
  V4L/DVB (13536): em28xx: Use the full RC5 code on HVR-950 Remote Controller
  V4L/DVB (13535): ir-common: Add a hauppauge new table with the complete RC5 code
  V4L/DVB (13534): ir-common: Remove some unused fields/structs
  V4L/DVB (13533): ir: use dynamic tables, instead of static ones
  V4L/DVB (13532): ir-common: Add infrastructure to use a dynamic keycode table
  V4L/DVB (13531): ir-common: rename the debug routine to allow exporting it
  V4L/DVB (13458): go7007: subdev conversion
  V4L/DVB (13457): s2250: subdev conversion
  V4L/DVB (13456): s2250: Change module structure
  V4L/DVB (13528): em28xx: add support for em2800 VC211A card
  em28xx: don't reduce scale to half size for em2800
  em28xx: don't load audio modules when AC97 is mis-detected
  em28xx: em2800 chips support max width of 640
  V4L/DVB (13523): dvb-bt8xx: fix compile warning
  ...

Fix up trivial conflicts due to spelling fixes from the trivial tree in
	Documentation/video4linux/gspca.txt
	drivers/media/video/cx18/cx18-mailbox.h

* 'next-i2c' of git://git.fluff.org/bjdooks/linux: (25 commits)
  i2c-pnx: Map I2C adapter number to platform ID number
  i2c-omap: OMAP3: PM: (re)init for every transfer to support off-mode
  i2c-designware: i2c_dw_handle_tx_abort: Use dev_dbg() for NOACK cases
  i2c-designware: Cosmetic cleanups
  i2c-designware: Tx abort cleanups
  i2c-designware: Skip RX_FULL and TX_EMPTY bits on tx abort errors
  i2c-designware: i2c_dw_xfer_msg: Fix error handling procedures
  i2c-designware: Disable TX_EMPTY when all i2c_msg msgs has been processed
  i2c-designware: Process all i2c_msg messages in the interrupt handler
  i2c-designware: i2c_dw_read: Remove redundant target address checker
  i2c-designware: i2c_dw_func: Set I2C_FUNC_SMBUS_foo bits
  i2c-designware: Initialize byte count variables just prior to being used
  i2c-designware: i2c_dw_xfer_msg: Introduce a local "buf" pointer
  i2c-designware: Divide i2c_dw_xfer_msg into two functions
  i2c-designware: Enable RX_FULL interrupt
  i2c-designware: Set Tx/Rx FIFO threshold levels
  i2c-designware: Process i2c_msg messages in the interrupt handler
  i2c-designware: i2c_dw_xfer_msg: Fix i2c_msg search bug
  i2c-designware: Improved _HCNT/_LCNT calculation
  i2c-designware: Remove an useless local variable "num"
  ...

* 's3c24xx-updates' of git://git.fluff.org/bjdooks/linux:
  ARM: S3C24XX: DMA: Use valid index when accessing array
  ARM: S3C: move s3c_pwm_remove to .devexit.text
  ARM: S3C24XX: Export s3c24xx_set_fiq for modules.
  ARM: S3C: move s3c_adc_remove to .devexit.text

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6:
  sl82c105: remove no longer needed debugging code
  sis5513: remove stale TODO
  pdc202xx_old: remove no longer needed debugging code
  cy82c693: remove no longer needed debugging code
  cmd64x: remove no longer needed debugging code
  alim15x3: remove obsolete and dangerous wdc_udma parameter
  ide: Increase WAIT_DRQ to accomodate some CF cards and SSD drives.
  cs5535: add pci id for AMD based CS5535 controllers
  slc90e66: fix UDMA handling
  drivers/ide/tx4938ide.c: use resource_size()
  drivers/ide/ide_platform.c: use resource_size()
  drivers/ide/au1xxx-ide.c: use resource_size()
  hpt366: remove dead old timing tables
  ide: update Kconfig text to mark as deprecated
  ide-tape: remove the BKL
  hpt366: kill unused #define's

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: add multi-input quirk for NextWindow Touchscreen.
  HID: add support for Acan FG-8100 barcode reader
  HID: make Media key on Logitech DiNovo Mini work
  HID: support Logitech/3DConnexion SpaceTraveler and SpaceNavigator
  HID: remove BKL from hiddev_ioctl_usage()
  HID: fixup quirk for NCR devices
  HID: pidff - fix unnecessary loop iterations on reset
  HID: add NOGET quirk for another device from CH Products
  HID: remove useless DRIVER_VERSION macro
  HID: fix MODULE_AUTHOR usage in HID modules
  HID: blacklist Acer Ferrari 4005 optical mouse

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (222 commits)
  [SCSI] zfcp: Remove flag ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP
  [SCSI] zfcp: Activate fc4s attributes for zfcp in FC transport class
  [SCSI] zfcp: Block scsi_eh thread for rport state BLOCKED
  [SCSI] zfcp: Update FSF error reporting
  [SCSI] zfcp: Improve ELS ADISC handling
  [SCSI] zfcp: Simplify handling of ct and els requests
  [SCSI] zfcp: Remove ZFCP_DID_MASK
  [SCSI] zfcp: Move WKA port to zfcp FC code
  [SCSI] zfcp: Use common code definitions for FC CT structs
  [SCSI] zfcp: Use common code definitions for FC ELS structs
  [SCSI] zfcp: Update FCP protocol related code
  [SCSI] zfcp: Dont fail SCSI commands when transitioning to blocked fc_rport
  [SCSI] zfcp: Assign scheduled work to driver queue
  [SCSI] zfcp: Remove STATUS_COMMON_REMOVE flag as it is not required anymore
  [SCSI] zfcp: Implement module unloading
  [SCSI] zfcp: Merge trace code for fsf requests in one function
  [SCSI] zfcp: Access ports and units with container_of in sysfs code
  [SCSI] zfcp: Remove suspend callback
  [SCSI] zfcp: Remove global config_mutex
  [SCSI] zfcp: Replace local reference counting with common kref
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: export clk_* symbols in clk.c
  m68knommu: Split the .init section into INIT_TEXT_SECTION and INIT_DATA_SECTION.
  m68knommu: Move __init_end out of the .init section.
  m68knommu: Move __init_begin out of the .init section.
  m68knommu: Use more macros inside the .init section.
  m68knommu: Use INIT_TASK_DATA and CACHELINE_ALIGNED_DATA.
  m68knommu: Make THREAD_SIZE available to assembly files.
  m68knommu: Don't hardcode the value of PAGE_SIZE in the linker script.
  m68knommu: rename BSS define in linker script
  m68knommu: add a task_pt_regs() macro
  m68knommu: define arch_has_single_step() and friends
  m68knommu: add uboot commandline argument passing support
  m68knommu: Coldfire GPIO corrections
  m68knommu: move mcf_remove to .devexit.text

Fixed up (?) conflict in arch/m68k/include/asm/ptrace.h

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix cut/paste detritus from unistd.h

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (137 commits)
  sh: include empty zero page in romImage
  sh: Make associative cache writes fatal on all SH-4A parts.
  sh: Drop associative writes for SH-4 cache flushes.
  sh: Partial revert of copy/clear_user_highpage() optimizations.
  sh: Add default uImage rule for se7724, ap325rxa, and migor.
  sh: allow runtime pm without suspend/resume callbacks
  sh: mach-ecovec24: Remove un-defined settings for VPU
  sh: mach-ecovec24: LCDC drive ability become high
  sh: fix sh7724 VEU3F resource size
  serial: sh-sci: Fix too early port disabling.
  sh: pfc: pr_info() -> pr_debug() cleanups.
  sh: pfc: Convert from ctrl_xxx() to __raw_xxx() I/O routines.
  sh: Improve kfr2r09 serial port setup code
  sh: Break out SuperH PFC code
  sh: Move KEYSC header file
  sh: convert /proc/cpu/aligmnent, /proc/cpu/kernel_alignment to seq_file
  sh: Add CPG save/restore code for sh7724 R-standby
  sh: Add SDHI power control support to Ecovec
  mfd: Add power control platform data to SDHI driver
  sh: mach-ecovec24: modify address map
  ...

Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci

* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (69 commits)
  davinci: Initial support for Neuros OSD2 platform.
  davinci: remove unused variable in arch/arm/mach-davinci/board-sffsdr.c
  davinci: fix section mismatch warning in arch/arm/mach-davinci/board-dm646x-evm.c
  DaVinci: DM365: Enable DaVinci RTC support for DM365 EVM
  DA8xx/OMAP-L1xx: Add high speed SD/MMC capabilities
  davinci: DA8XX/OMAP-L1XX: enable cpuidle and regulator in defconfig
  davinci: DA850/OMAP-L138: avoid using separate initcall for initializing regulator
  davinci: DA850/OMAP-L138 EVM: register for cpuidle support
  davinci: DA8XX/OMAP-L1XX: add support for cpuidle driver register
  davinci: add CPU idle driver
  davinci: DA8XX/OMAP-L1XX: fix compiler warning
  davinci: DA850/OMAP-L138: eliminate static function declaration
  davinci: DA850/OMAP-L138 EVM: simplify configuration of emac in MII/RMII mode
  davinci: DA850/OMAP-L138 EVM: get rid of DA850_UI_EXP config option
  davinci: DA850/OMAP-L138 EVM: implement autodetect of RMII PHY
  davinci: DA830/OMAP-L137 EVM: do not configure NAND on UI card when MMC/SD is selected
  davinci: DA830/OMAP-L137 EVM: use runtime detection for UI card
  davinci: DA830/OMAP-L137 EVM: remove ifdefs inside da830_evm_init()
  davinci: DA830/OMAP-L137 EVM: fix warning with default config
  davinci: Add NAND support for DA830/OMAP-L137 EVM platform
  ...

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (72 commits)
  [S390] 3215/3270 console: remove wrong comment
  [S390] dasd: remove BKL from extended error reporting code
  [S390] vmlogrdr: remove BKL
  [S390] vmur: remove BKL
  [S390] zcrypt: remove BKL
  [S390] 3270: remove BKL
  [S390] vmwatchdog: remove lock_kernel() from open() function
  [S390] monwriter: remove lock_kernel() from open() function
  [S390] monreader: remove lock_kernel() from open() function
  [S390] s390: remove unused nfsd #includes
  [S390] ftrace: build ftrace.o when CONFIG_FTRACE_SYSCALLS is set for s390
  [S390] etr/stp: put correct per cpu variable
  [S390] tty3270: move keyboard compat ioctls
  [S390] sclp: improve servicability setting
  [S390] s390: use change recording override for kernel mapping
  [S390] MAINTAINERS: Add s390 drivers block
  [S390] use generic sockios.h header file
  [S390] use generic termbits.h header file
  [S390] smp: remove unused typedef and defines
  [S390] cmm: free pages on hibernate.
  ...

We have a directory for misc drivers documentation, let's use it.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

the description in Documentation/filesystems/proc.txt of the
procs_running entry in /proc/stat is confusing (according to that
description, it looks as if procs_running could only be a number
between 0 and the number of CPUs).

Changed it to a more accurate description in the patch attached.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Corrected sysfs gpio chip node name and fixed punctuation.
Signed-off-by: NDominik D. Geyer <dominik.geyer@gmx.de>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since signal_pending() takes a task_struct pointer as an argument, update
the example to pass in 'current'.
Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>