- 29 10月, 2009 1 次提交
-
-
由 Tilman Schmidt 提交于
Replace the "ignoring Additional Info" warning message by better readable ones citing the specific subparameters being ignored. Make parts of the code more readable by using a local cmsg pointer variable. Impact: readability improvement Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 10月, 2009 1 次提交
-
-
由 Xiaotian Feng 提交于
There's a circular locking dependency: ---> isdn_net_get_locked_lp --->lock &nd->queue_lock --->lock &nd->queue->xmit_lock ..................... ---->unlock &nd->queue_lock ---> isdn_net_writebuf_skb (called with &nd->queue->xmit_lock locked) ---->isdn_net_inc_frame_cnt ---->isdn_net_device_busy ----> lock &nd->queue_lock This will trigger lockdep warnings: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-rc4-testing #7 ------------------------------------------------------- ipppd/28379 is trying to acquire lock: (&netdev->queue_lock){......}, at: [<e62ad0fd>] isdn_net_device_busy+0x2c/0x74 [isdn] but task is already holding lock: (&netdev->local->xmit_lock){+.....}, at: [<e62aefc2>] isdn_net_write_super+0x3f/0x6e [isdn] which lock already depends on the new lock. ....... We don't need to lock nd->queue->xmit_lock to protect single isdn_net_lp_busy(). This can fix above lockdep warnings. Reported-and-tested-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NXiaotian Feng <xtfeng@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 10月, 2009 15 次提交
-
-
由 Stephen Hemminger 提交于
All usages of structure net_proto_ops should be declared const. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Add a Kernel CAPI interface to the Gigaset driver. Impact: optional new functionality Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Add a dummy LL interface to the Gigaset driver so that it can be built and, in a limited way, used without the ISDN4Linux subsystem. Impact: new configuration alternative Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Reorganize the code of the Gigaset driver, moving all isdn4linux dependencies to the source file i4l.c so that it can be replaced by a file capi.c interfacing to Kernel CAPI instead. Impact: refactoring, no functional change Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Add kerneldoc comments to some functions in the Gigaset driver. Impact: documentation Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Dump payload data consistently only when DEBUG_STREAM_DUMP debug bit is set. Impact: debugging aid Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
When the Gigaset base stops responding, try resetting the USB connection to recover. Impact: error handling improvement Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Clear out pending command that got rejected with 'ERROR' response. This fixes the bug where unloading the driver module would hang with the message: "gigaset: not searching scheduled commands: busy" after a device communication error. Impact: error handling bugfix Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Mention in the driver load announcement whether the driver was built with debugging messages enabled, to facilitate support. Impact: informational message Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Don't drop the remainder of an URB if an isochronous frame has an error. Impact: error handling improvement Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
The code of the Gigaset driver assumes that sk_buff-s coming from the ISDN4Linux subsystem are always linear. Explicitly calling skb_linearize() is cheap if they are, but much more robust in case they ever aren't. Impact: robustness improvement Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Signal D channel disconnect in a few cases where it was missed, including when an incoming call is disconnected before it was accepted. Impact: error handling improvement Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Being able to change the debugmode module parameter of capidrv on the fly is quite useful for debugging and doesn't do any harm. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
In several places, capidrv sends a CAPI message to the ISDN device and then updates its internal state accordingly. If the response message from the device arrives before the state is updated, it may be rejected or processed incorrectly. Avoid these races by updating the state before emitting the message. Impact: bugfix Signed-off-by: NTilman Schmidt <tilman@imap.cc> Acked-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Info values in the 0x00xx range are defined in the CAPI standard as "Informational, message processed successfully". Therefore a CONNECT_B3_CONF message with an Info value in that range should open an NCCI just as with Info==0. Impact: minor bugfix Signed-off-by: NTilman Schmidt <tilman@imap.cc> Acked-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 10月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 10月, 2009 1 次提交
-
-
由 David S. Miller 提交于
This provides safety against negative optlen at the type level instead of depending upon (sometimes non-trivial) checks against this sprinkled all over the the place, in each and every implementation. Based upon work done by Arjan van de Ven and feedback from Linus Torvalds. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 9月, 2009 1 次提交
-
-
由 Randy Dunlap 提交于
Commit cb3824ba didn't fix this problem. Fix build errors in netjet, using isdnhdlc module: drivers/built-in.o: In function `mode_tiger': netjet.c:(.text+0x1ca0c7): undefined reference to `isdnhdlc_rcv_init' netjet.c:(.text+0x1ca0d4): undefined reference to `isdnhdlc_out_init' drivers/built-in.o: In function `fill_dma': netjet.c:(.text+0x1ca2bd): undefined reference to `isdnhdlc_encode' drivers/built-in.o: In function `read_dma': netjet.c:(.text+0x1ca614): undefined reference to `isdnhdlc_decode' drivers/built-in.o: In function `nj_irq': netjet.c:(.text+0x1cb07a): undefined reference to `isdnhdlc_encode' drivers/built-in.o: In function `isdnhdlc_decode': (.text+0x1c2088): undefined reference to `crc_ccitt_table' drivers/built-in.o: In function `isdnhdlc_encode': (.text+0x1c2339): undefined reference to `crc_ccitt_table' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 9月, 2009 1 次提交
-
-
由 James Morris 提交于
Make all seq_operations structs const, to help mitigate against revectoring user-triggerable function pointers. This is derived from the grsecurity patch, although generated from scratch because it's simpler than extracting the changes from there. Signed-off-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Acked-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 9月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 9月, 2009 2 次提交
-
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Anand Gadiyar 提交于
trivial: fix typo "for for" in multiple files Signed-off-by: NAnand Gadiyar <gadiyar@ti.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 20 9月, 2009 1 次提交
-
-
由 Tilman Schmidt 提交于
The tty_operation chars_in_buffer() is not allowed to return a negative value to signal an error. Corrects the problem flagged by commit 23198fda, "tty: fix chars_in_buffers". Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: stable <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 01 9月, 2009 1 次提交
-
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 8月, 2009 2 次提交
-
-
由 Andreas Eversberg 提交于
The size of receive buffer pointer was used to get size of receive buffer instead of recvbuf_size itself, so only 4/8 bytes could be transfered. This is a regression to 2.6.30 introduced by commit 8c90e11e mISDN: Use kernel_{send,recv}msg instead of open coding Signed-off-by: NAndreas Eversberg <andreas@eversberg.eu> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 roel kluin 提交于
Check whether index is within bounds before testing the element. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Acked-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 7月, 2009 1 次提交
-
-
由 Andreas Eversberg 提交于
The size of receive buffer pointer was used to get size of receive buffer instead of recvbuf_size itself, so only 4/8 bytes could be transfered. This is a regression to 2.6.30 introduced by commit 8c90e11e ("mISDN: Use kernel_{send,recv}msg instead of open coding") Signed-off-by: NAndreas Eversberg <andreas@eversberg.eu> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 7月, 2009 2 次提交
-
-
由 Karsten Keil 提交于
Based on comments from Joe Perches <joe@perches.com>. Thanks. Fix IOFUNC_MEMIO macro. WriteFiFo##name##_MIO use the wrong struct name, this was missed because the macro was only called with this name. Clarify with _func that the defined types are functions. Add names to the parameters for better understanding the purpose. Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 7月, 2009 9 次提交
-
-
由 Karsten Keil 提交于
In the PCI probe function struct pci_device_id points to the matched entry of the ID table, but for devices which are matched with PCI_ANY_ID sub IDs we want display the IDs of the device itself. Signed-off-by: NKarsten Keil <keil@b1-systems.de>
-
由 Karsten Keil 提交于
These changes were a direct result of using a semantic patch More information can be found at http://www.emn.fr/x-info/coccinelle/ Modified some of the changes to avoid the extra define. Signed-off-by: NStoyan Gaydarov <sgayda2@uiuc.edu> Signed-off-by: NKarsten Keil <keil@b1-systems.de>
-
由 Julia Lawall 提交于
The result of container_of should not be NULL. In particular, in this case the argument to the enclosing function has passed though INIT_WORK, which dereferences it, implying that its container cannot be NULL. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ identifier fn,work,x,fld; type T; expression E1,E2; statement S; @@ static fn(struct work_struct *work) { ... when != work = E1 x = container_of(work,T,fld) ... when != x = E2 - if (x == NULL) S ... } // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NKarsten Keil <keil@b1-systems.de>
-
由 Karsten Keil 提交于
Add support for cards based on the Tiger 300 and Tiger 320 ISDN PCI chip. Currently only the ISAC ISDN line interface is supported. Signed-off-by: NKarsten Keil <keil@b1-systems.de>
-
由 Karsten Keil 提交于
Add driver for Winbond W6692 based PCI cards. Signed-off-by: NKarsten Keil <keil@b1-systems.de>
-
由 Karsten Keil 提交于
Add support for the Siemens ISAR DSP chip and cards based on it, including analog modem protocols. Signed-off-by: NKarsten Keil <keil@b1-systems.de>
-
由 Karsten Keil 提交于
Add mISDN driver for AVM FRITZ!CARD PCI (all versions). Signed-off-by: NKarsten Keil <keil@b1-systems.de>
-
由 Karsten Keil 提交于
This driver supports cards with Infineon ISAC/HSCX, ISACX, IPAC and IPACX chips from various manufacturers. Signed-off-by: NKarsten Keil <keil@b1-systems.de>
-
由 Karsten Keil 提交于
Clearing B-channel is needed in every driver, so it makes sense to have it as common function. Signed-off-by: NKarsten Keil <keil@b1-systems.de>
-