Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

object_no can be trivially formatted into an object name.  We already
store object names in OSD requests with special care to avoid dynamic
allocations for short names.  Storing a name in obj_request, obtained
as below (!), is a waste and will be removed in the next commit.

    name = kmem_cache_alloc(rbd_segment_name_cache, ...);
    snprintf(name, ...);
    obj_request->object_name = kstrdup(name);
    kmem_cache_free(rbd_segment_name_cache, name);
    ...
    ceph_oid_aprintf(..., "%s", obj_request->object_name);
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

... and also fix up the comment -- format 1 data objects have always
been 12 hex digits long.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

Factor OSD request allocation and initialization code out into
__rbd_osd_req_create().
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

The allocation doesn't depend on offset and length.  Both offset and
length can be changed after obj_request is allocated, too.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

Add support for RBD_FEATURE_DATA_POOL feature.  rbd_dev->layout.pool_id
now stores the data pool id.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

Rather than initializing layout fields with some made up values in
__rbd_dev_create(), move the initialization into rbd_init_layout() and
call it after the header is actually populated.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

Returning u64 doesn't make sense: max header->obj_order is 25 and
ceph_file_layout::object_size is u32.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

As explained in the previous commit, rbd_obj_request machinery (and
rbd_osd_req_create() in particular) shouldn't be used for working with
metadata objects.

Switch to the recently added ceph_osdc_call().  It assumes single pages
for outbound and inbound buffers, but that's OK - none of the callers
need more than that.  These pages need to be allocated (messenger is in
dire need of proper iterator interface!), but we are swapping for
pages[] and pagelist allocations in the existing code.

Kill class_name argument - all rbd methods are under "rbd".
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

To spare checking for "this reply fits into a page, but does it fit
into my buffer?" in some callers, osd_req_op_cls_response_data_pages()
needs to know how big it is.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

rbd_obj_request machinery is completely unnecessary here; all that's
being done is fetching a metadata object - no striping, cloning, etc.
More importantly, rbd_osd_req_create() grabs pool id from layout and
that is becoming a data pool id.

Kill offset argument - all metadata objects are small and read in full.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

No reason to delay it until image_id is known.  This will be required
by some rbd_obj_method_sync() callers, after rbd_obj_method_sync() is
changed to take oloc.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

Image format 1 is deprecated and format 2 doesn't have these.  Also,
__rbd_dev_create() takes care of zeroing (or otherwise initializing)
format 2 specific fields.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

... to accommodate potentially very wide EC pools.  This increases the
size of a typical rbd ceph_osd_request by ~12% (from 1040 to 1168 bytes),
but I'd rather go future proof here.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

With EC overwrites maturing, the kernel client will be getting exposed
to potentially very wide EC pools.  While "min(pi->size, X)" works fine
when the cluster is stable and happy, truncating OSD sets interferes
with resend logic (ceph_is_new_interval(), etc).  Abort the mapping if
the pool is too wide, assigning the request to the homeless session.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Much like Arlo Guthrie, I decided that one big pile is better than two
little piles.

Reflects ceph.git commit 95c2df6c7e0b22d2ea9d91db500cf8b9441c73ba.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Then add it to the working state. It would be very nice if we didn't
have to take a lock to calculate a crush placement. By moving the
permutation array into the working data, we can treat the CRUSH map as
immutable.

Reflects ceph.git commit cbcd039651c0569551cb90d26ce27e1432671f2a.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Simplify osdmap_decode() and osdmap_apply_incremental() a bit.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

This was causing a build failure for openrisc when using musl and
gcc 5.4.0 since the file is not available in the toolchain.

It doesnt seem this is needed and removing it does not cause any build
warnings for me.
Signed-off-by: NStafford Horne <shorne@gmail.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

In commit c3f4688a (ceph: don't set req->r_locked_dir in
ceph_d_revalidate), we changed the code to do a GETATTR instead of a
LOOKUP as the parent info isn't strictly necessary to revalidate the
dentry. What we missed there though is that in order to update the lease
on the dentry after revalidating it, we _do_ need parent info.

Change ceph_d_revalidate back to doing a LOOKUP instead of a GETATTR so
that we can get the parent info in order to update the lease from
ceph_fill_trace. Note that we set req->r_parent here, but we cannot set
the CEPH_MDS_R_PARENT_LOCKED flag as we can't guarantee that it is.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NYan, Zheng <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

We don't really require that the parent be locked in order to update the
lease on a dentry. Lease info is protected by the d_lock. In the event
that the parent is not locked in ceph_fill_trace, and we have both
parent and target info, go ahead and update the dentry lease.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NYan, Zheng <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

In a later patch, we're going to need to allow ceph_fill_trace to
update the dentry's lease when the parent is not locked. This is
potentially racy though -- by the time we get around to processing the
trace, the parent may have already changed.

Change update_dentry_lease to take a ceph_vino pointer and use that to
ensure that the dentry's parent still matches it before updating the
lease.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NYan, Zheng <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

This if block updates the dentry lease even in the case where
the MDS didn't grant one.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NYan, Zheng <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

struct ceph_mds_request has an r_locked_dir pointer, which is set to
indicate the parent inode and that its i_rwsem is locked.  In some
critical places, we need to be able to indicate the parent inode to the
request handling code, even when its i_rwsem may not be locked.

Most of the code that operates on r_locked_dir doesn't require that the
i_rwsem be locked. We only really need it to handle manipulation of the
dcache. The rest (filling of the inode, updating dentry leases, etc.)
already has its own locking.

Add a new r_req_flags bit that indicates whether the parent is locked
when doing the request, and rename the pointer to "r_parent". For now,
all the places that set r_parent also set this flag, but that will
change in a later patch.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NYan, Zheng <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Currently, we have a bunch of bool flags in struct ceph_mds_request. We
need more flags though, but each bool takes (at least) a byte. Those
add up over time.

Merge all of the existing bools in this struct into a single unsigned
long, and use the set/test/clear_bit macros to manipulate them. These
are atomic operations, but that is required here to prevent
load/modify/store races. The existing flags are protected by different
locks, so we can't rely on them for that purpose.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NYan, Zheng <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Just get it from r_session since that's what's always passed in.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NYan, Zheng <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Keeping around commented out code is just asking for it to bitrot and
makes viewing the code under cscope more confusing.  If
we really need this, then we can revert this patch and put it under a
Kconfig option.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NYan, Zheng <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

__ceph_caps_mds_wanted() ignores caps from stale session. So the
return value of __ceph_caps_mds_wanted() can keep the same across
ceph_renew_caps(). This causes try_get_cap_refs() to keep calling
ceph_renew_caps(). The fix is ignore the session valid check for
the try_get_cap_refs() case. If session is stale, just let the
caps requester sleep.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

when flushing inode's auth cap changes, we need to move it into the
new auth cap session's cap_flushing list
Signed-off-by: NYan, Zheng <zyan@redhat.com>

add_to_page_cache_lru() can fails, so the actual pages to read
can be smaller than the initial size of osd request. We need to
update osd request size in that case.
Signed-off-by: NYan, Zheng <zyan@redhat.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>

sparse says:

    fs/ceph/ioctl.c:100:28: warning: cast to restricted __le64

preferred_osd is a __s64 so we don't need to do any conversion. Also,
just remove the cast in ceph_ioctl_get_layout as it's not needed.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NSage Weil <sage@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Currently crypto.c gets linux/sched.h indirectly through linux/slab.h
from linux/kasan.h.  Include it directly for memalloc_noio_*() inlines.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

I ran into this compile warning, which is the result of BUG_ON(1)
not always leading to the compiler treating the code path as
unreachable:

    include/linux/ceph/osdmap.h: In function 'ceph_can_shift_osds':
    include/linux/ceph/osdmap.h:62:1: error: control reaches end of non-void function [-Werror=return-type]

Using BUG() here avoids the warning.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

user space may open/close single file frequently. It's not good
to send a clientcaps message to mds for each open/close syscall.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

This patch sets the io_pages bdi hint based on the rsize mount option.
Without this patch large buffered reads (request size > max readahead)
are processed sequentially in chunks of the readahead size (i.e. read
requests are sent out up to the readahead size, then the
do_generic_file_read() function waits until the first page is received).

With this patch read requests are sent out at once up to the size
specified in the rsize mount option (default: 64 MB).
Signed-off-by: NAndreas Gerstmayr <andreas.gerstmayr@catalysts.cc>
Acked-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NYan, Zheng <zyan@redhat.com>

trivial fix to spelling mistake in debug message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NYan, Zheng <zyan@redhat.com>

This removes the uses of ACCESS_ONCE in favor of READ_ONCE
Signed-off-by: NSeraphime Kirkovski <kirkseraph@gmail.com>
Signed-off-by: NYan, Zheng <zyan@redhat.com>

If we have a parent inode reference already, then we don't need to
go back up the directory tree to find one.

Link: http://tracker.ceph.com/issues/18148Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NYan, Zheng <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>