since btrfs_kobj_rm_device() does nothing with fs_info
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

btrfs_kobj_add_device() does not need fs_info any more.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

Switch to div_u64 if the divisor is a numeric constant or sum of
sizeof()s. We can remove a few instances of do_div that has the hidden
semtantics of changing the 1st argument.

Small power-of-two divisors are converted to bitshifts, large values are
kept intact for clarity.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

Switch to div_u64 if the divisor is a numeric constant or sum of
sizeof()s. We can remove a few instances of do_div that has the hidden
semtantics of changing the 1st argument.

Small power-of-two divisors are converted to bitshifts, large values are
kept intact for clarity.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

1: Remove no-need DEFINE_WAIT(wait)
2: Add likely() for BTRFS_FS_STATE_DEV_REPLACING condition
3: Use while loop instead of goto
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

The commit c404e0dc (Btrfs: fix use-after-free in the finishing
procedure of the device replace) fixed a use-after-free problem
which happened when removing the source device at the end of device
replace, but at that time, btrfs didn't support device replace
on raid56, so we didn't fix the problem on the raid56 profile.
Currently, we implemented device replace for raid56, so we need
kick that problem out before we enable that function for raid56.

The fix method is very simple, we just increase the bio per-cpu
counter before we submit a raid56 io, and decrease the counter
when the raid56 io ends.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

The following lockdep warning is triggered during xfstests:

[ 1702.980872] =========================================================
[ 1702.981181] [ INFO: possible irq lock inversion dependency detected ]
[ 1702.981482] 3.18.0-rc1 #27 Not tainted
[ 1702.981781] ---------------------------------------------------------
[ 1702.982095] kswapd0/77 just changed the state of lock:
[ 1702.982415]  (&delayed_node->mutex){+.+.-.}, at: [<ffffffffa03b0b51>] __btrfs_release_delayed_node+0x41/0x1f0 [btrfs]
[ 1702.982794] but this lock took another, RECLAIM_FS-unsafe lock in the past:
[ 1702.983160]  (&fs_info->dev_replace.lock){+.+.+.}

and interrupts could create inverse lock ordering between them.

[ 1702.984675]
other info that might help us debug this:
[ 1702.985524] Chain exists of:
  &delayed_node->mutex --> &found->groups_sem --> &fs_info->dev_replace.lock

[ 1702.986799]  Possible interrupt unsafe locking scenario:

[ 1702.987681]        CPU0                    CPU1
[ 1702.988137]        ----                    ----
[ 1702.988598]   lock(&fs_info->dev_replace.lock);
[ 1702.989069]                                local_irq_disable();
[ 1702.989534]                                lock(&delayed_node->mutex);
[ 1702.990038]                                lock(&found->groups_sem);
[ 1702.990494]   <Interrupt>
[ 1702.990938]     lock(&delayed_node->mutex);
[ 1702.991407]
 *** DEADLOCK ***

It is because the btrfs_kobj_{add/rm}_device() will call memory
allocation with GFP_KERNEL,
which may flush fs page cache to free space, waiting for it self to do
the commit, causing the deadlock.

To solve the problem, move btrfs_kobj_{add/rm}_device() out of the
dev_replace lock range, also involing split the
btrfs_rm_dev_replace_srcdev() function into remove and free parts.

Now only btrfs_rm_dev_replace_remove_srcdev() is called in dev_replace
lock range, and kobj_{add/rm} and btrfs_rm_dev_replace_free_srcdev() are
called out of the lock range.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

device replace could fail due to another running scrub process or any
other errors btrfs_scrub_dev() may hit, but this failure doesn't get
returned to userspace.

The following steps could reproduce this issue

	mkfs -t btrfs -f /dev/sdb1 /dev/sdb2
	mount /dev/sdb1 /mnt/btrfs
	while true; do btrfs scrub start -B /mnt/btrfs >/dev/null 2>&1; done &
	btrfs replace start -Bf /dev/sdb2 /dev/sdb3 /mnt/btrfs
	# if this replace succeeded, do the following and repeat until
	# you see this log in dmesg
	# BTRFS: btrfs_scrub_dev(/dev/sdb2, 2, /dev/sdb3) failed -115
	#btrfs replace start -Bf /dev/sdb3 /dev/sdb2 /mnt/btrfs

	# once you see the error log in dmesg, check return value of
	# replace
	echo $?

Introduce a new dev replace result

BTRFS_IOCTL_DEV_REPLACE_RESULT_SCRUB_INPROGRESS

to catch -EINPROGRESS explicitly and return other errors directly to
userspace.
Signed-off-by: NEryu Guan <guaneryu@gmail.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

The problem is:
	Task0(device scan task)		Task1(device replace task)
	scan_one_device()
	mutex_lock(&uuid_mutex)
	device = find_device()
					mutex_lock(&device_list_mutex)
					lock_chunk()
					rm_and_free_source_device
					unlock_chunk()
					mutex_unlock(&device_list_mutex)
	check device

Destroying the target device if device replace fails also has the same problem.

We fix this problem by locking uuid_mutex during destroying source device or
target device, just like the device remove operation.

It is a temporary solution, we can fix this problem and make the code more
clear by atomic counter in the future.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

There were several problems about chunk mutex usage:
- Lock chunk mutex when updating metadata. It would cause the nested
  deadlock because updating metadata might need allocate new chunks
  that need acquire chunk mutex. We remove chunk mutex at this case,
  because b-tree lock and other lock mechanism can help us.
- ABBA deadlock occured between device_list_mutex and chunk_mutex.
  When we update device status, we must acquire device_list_mutex at the
  beginning, and then we might get chunk_mutex during the device status
  update because we need allocate new chunks for metadata COW. But at
  most place, we acquire chunk_mutex at first and then acquire device list
  mutex. We need change the lock order.
- Some place we needn't acquire chunk_mutex. For example we needn't get
  chunk_mutex when we free a empty seed fs_devices structure.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

->total_bytes,->disk_total_bytes,->bytes_used is protected by chunk
lock when we change them, but sometimes we read them without any lock,
and we might get unexpected value. We fix this problem like inode's
i_size.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

device->bytes_used will be changed when allocating a new chunk, and
disk_total_size will be changed if resizing is successful.
Meanwhile, the on-disk super blocks of the previous transaction
might not be updated. Considering the consistency of the metadata
in the previous transaction, We should use the size in the previous
transaction to check if the super block is beyond the boundary
of the device.

Though it is not big problem because we don't use it now, but anyway
it is better that we make it be consistent with the common metadata,
maybe we will use it in the future.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

total_size will be changed when resizing a device, and disk_total_size
will be changed if resizing is successful. Meanwhile, the on-disk super
blocks of the previous transaction might not be updated. Considering
the consistency of the metadata in the previous transaction, We should
use the size in the previous transaction to check if the super block is
beyond the boundary of the device. Fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

We didn't protect the assignment of the target device, it might cause the
problem that the super block update was skipped because we might find wrong
size of the target device during the assignment. Fix it by moving the
assignment sentences into the initialization function of the target device.
And there is another merit that we can check if the target device is suitable
more early.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

btrfs-transacion:5657
[stack snip]
btrfs_bio_map()
    btrfs_bio_counter_inc_blocked()
        percpu_counter_inc(&fs_info->bio_counter)  ###bio_counter > 0(A)
        __btrfs_bio_map()
            btrfs_dev_replace_lock()
                mutex_lock(dev_replace->lock)	   ###wait mutex(B)

btrfs:32612
[stack snip]
btrfs_dev_replace_start()
    btrfs_dev_replace_lock()
	mutex_lock(dev_replace->lock)		   ###hold mutex(B)
    btrfs_dev_replace_finishing()
        btrfs_rm_dev_replace_blocked()
            wait until percpu_counter_sum == 0	   ###wait on bio_counter(A)

This bug can be triggered quite easily by the following test script:
http://pastebin.com/MQmb37Cy

This patch will fix the ABBA problem by calling
btrfs_dev_replace_unlock() before btrfs_rm_dev_replace_blocked().

The consistency of btrfs devices list and their superblocks is protected
by device_list_mutex, not btrfs_dev_replace_lock/unlock().
So it is safe the move btrfs_dev_replace_unlock() before
btrfs_rm_dev_replace_blocked().
Reported-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <clm@fb.com>

there is no matching open parenthesis for the closing parenthesis
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

reproducer:
    reproducer:
    mount /dev/sdb /btrfs
    btrfs dev add /dev/sdc /btrfs
    btrfs rep start -B /dev/sdb /dev/sdd /btrfs
    umount /btrfs

WARNING: CPU: 0 PID: 3882 at fs/btrfs/volumes.c:892 __btrfs_close_devices+0x1c8/0x200 [btrfs]()

which is

        WARN_ON(fs_devices->rw_devices);

   The problem here is that we did not add one to the rw_devices when
   we replace the seed device with a writable device.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

when we replace the device its corresponding sysfs
entry has to be replaced as well
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

To return EOPNOTSUPP is more user friendly than to return EINVAL,
and then user-space tool will show that the dev_replace operation
for raid56 is not currently supported rather than showing that
there is an invalid argument.
Signed-off-by: NGui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

We needn't flush all delalloc inodes when we doesn't get s_umount lock,
or we would make the tasks wait for a long time.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>

During device replace test, we hit a null pointer deference (It was very easy
to reproduce it by running xfstests' btrfs/011 on the devices with the virtio
scsi driver). There were two bugs that caused this problem:
- We might allocate new chunks on the replaced device after we updated
  the mapping tree. And we forgot to replace the source device in those
  mapping of the new chunks.
- We might get the mapping information which including the source device
  before the mapping information update. And then submit the bio which was
  based on that mapping information after we freed the source device.

For the first bug, we can fix it by doing mapping tree update and source
device remove in the same context of the chunk mutex. The chunk mutex is
used to protect the allocable device list, the above method can avoid
the new chunk allocation, and after we remove the source device, all
the new chunks will be allocated on the new device. So it can fix
the first bug.

For the second bug, we need make sure all flighting bios are finished and
no new bios are produced during we are removing the source device. To fix
this problem, we introduced a global @bio_counter, we not only inc/dec
@bio_counter outsize of map_blocks, but also inc it before submitting bio
and dec @bio_counter when ending bios.

Since Raid56 is a little different and device replace dosen't support raid56
yet, it is not addressed in the patch and I add comments to make sure we will
fix it in the future.
Reported-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>

the alloc list of the filesystem is protected by ->chunk_mutex, we need
get that mutex when we insert the new device into the list.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>

Convert all applicable cases of printk and pr_* to the btrfs_* macros.

Fix all uses of the BTRFS prefix.
Signed-off-by: NFrank Holton <fholton@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

rename the function -- btrfs_start_all_delalloc_inodes(), and make its
name be compatible to btrfs_wait_ordered_roots(), since they are always
used at the same place.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

It is very likely that there are lots of ordered extents in the filesytem,
if we wait for the completion of all of them when we want to reclaim some
space for the metadata space reservation, we would be blocked for a long
time. The performance would drop down suddenly for a long time.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

fs/btrfs/compat.h only contained trivial macro wrappers of drop_nlink()
and inc_nlink().  This doesn't belong in mainline.
Signed-off-by: NZach Brown <zab@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Signed-off-by: NZach Brown <zab@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

For both balance and replace, cancelling involves changing the on-disk
state and committing a transaction, which is not a good thing to do on
read-only filesystems.

Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

free_device rcu callback, scheduled from btrfs_rm_dev_replace_srcdev,
can be processed before btrfs_scratch_superblock is called, which would
result in a use-after-free on btrfs_device contents.  Fix this by
zeroing the superblock before the rcu callback is registered.

Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

This is a left over of how we used to wait for ordered extents, which was to
grab the inode and then run filemap flush on it.  However if we have an ordered
extent then we already are holding a ref on the inode, and we just use
btrfs_start_ordered_extent anyway, so there is no reason to have an extra ref on
the inode to start work on the ordered extent.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

The internal btrfs device id is a u64, hence make the constant
BTRFS_DEV_REPLACE_DEVID "unsigned long long" as well, so we no longer need
a cast to print it.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

u64 is "unsigned long long" on all architectures now, so there's no need to
cast it when formatting it using the "ll" length modifier.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Sweep of the simple cases.

Cc: netdev@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The reason we introduce per-subvolume ordered extent list is the same
as the per-subvolume delalloc inode list.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

When we create a snapshot, we need flush all delalloc inodes in the
fs, just flushing the inodes in the source tree is OK. So we introduce
per-subvolume delalloc inode list.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>