On removal, a qeth card's netdevice is currently not properly freed
because the call chain looks as follows:

qeth_core_remove_device(card)
	lx_remove_device(card)
		unregister_netdev(card->dev)
		card->dev = NULL			!!!
	qeth_core_free_card(card)
		if (card->dev)				!!!
			free_netdev(card->dev)

Fix it by free'ing the netdev straight after unregistering. This also
fixes the sysfs-driven layer switch case (qeth_dev_layer2_store()),
where the need to free the current netdevice was not considered at all.

Note that free_netdev() takes care of the netif_napi_del() for us too.

Fixes: 4a71df50 ("qeth: new qeth device driver")
Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kevin Hao says:

====================
net: phy: Add general dummy stubs for MMD register access

v2:
As suggested by Andrew:
  - Add general dummy stubs
  - Also use that for the micrel phy

This patch series fix the Ethernet broken on the mpc8315erdb board introduced
by commit b6b5e8a6 ("gianfar: Disable EEE autoneg by default").
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The new general dummy stubs for MMD register access were introduced.
Use that for the codes reuse.
Signed-off-by: NKevin Hao <haokexin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Ethernet on mpc8315erdb is broken since commit b6b5e8a6
("gianfar: Disable EEE autoneg by default"). The reason is that
even though the rtl8211b doesn't support the MMD extended registers
access, it does return some random values if we trying to access
the MMD register via indirect method. This makes it seem that the
EEE is supported by this phy device. And the subsequent writing to
the MMD registers does cause the phy malfunction. So use the dummy
stubs for the MMD register access to fix this issue.

Fixes: b6b5e8a6 ("gianfar: Disable EEE autoneg by default")
Signed-off-by: NKevin Hao <haokexin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For some phy devices, even though they don't support the MMD extended
register access, it does have some side effect if we are trying to
read/write the MMD registers via indirect method. So introduce general
dummy stubs for MMD register access which these devices can use to avoid
such side effect.

Fixes: b6b5e8a6 ("gianfar: Disable EEE autoneg by default")
Signed-off-by: NKevin Hao <haokexin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

 - fix possible IPv6 packet loss when multicast extension is used, by Linus Luessing

 - fix SKB handling issues for TTVN and DAT, by Matthias Schiffer (two patches)

 - fix include for eventpoll, by Sven Eckelmann

 - fix skb checksum for ttvn reroutes, by Sven Eckelmann
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Davide Caratti says:

====================
fix idr leak in actions

This series fixes situations where a temporary failure to install a TC
action results in the permanent impossibility to reuse the configured
value of 'index'.

Thanks to Cong Wang for the initial review.

v2: fix build error in act_ipt.c, reported by kbuild test robot
====================
Acked-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcf_skbmod_init() can fail after the idr has been successfully reserved.
When this happens, every subsequent attempt to configure skbmod rules
using the same idr value will systematically fail with -ENOSPC, unless
the first attempt was done using the 'replace' keyword:

 # tc action add action skbmod swap mac index 100
 RTNETLINK answers: Cannot allocate memory
 We have an error talking to the kernel
 # tc action add action skbmod swap mac index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 # tc action add action skbmod swap mac index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 ...

Fix this in tcf_skbmod_init(), ensuring that tcf_idr_release() is called
on the error path when the idr has been reserved, but not yet inserted.
Also, don't test 'ovr' in the error path, to avoid a 'replace' failure
implicitly become a 'delete' that leaks refcount in act_skbmod module:

 # rmmod act_skbmod; modprobe act_skbmod
 # tc action add action skbmod swap mac index 100
 # tc action add action skbmod swap mac continue index 100
 RTNETLINK answers: File exists
 We have an error talking to the kernel
 # tc action replace action skbmod swap mac continue index 100
 RTNETLINK answers: Cannot allocate memory
 We have an error talking to the kernel
 # tc action list action skbmod
 #
 # rmmod  act_skbmod
 rmmod: ERROR: Module act_skbmod is in use

Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcf_vlan_init() can fail after the idr has been successfully reserved.
When this happens, every subsequent attempt to configure vlan rules using
the same idr value will systematically fail with -ENOSPC, unless the first
attempt was done using the 'replace' keyword.

 # tc action add action vlan pop index 100
 RTNETLINK answers: Cannot allocate memory
 We have an error talking to the kernel
 # tc action add action vlan pop index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 # tc action add action vlan pop index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 ...

Fix this in tcf_vlan_init(), ensuring that tcf_idr_release() is called on
the error path when the idr has been reserved, but not yet inserted. Also,
don't test 'ovr' in the error path, to avoid a 'replace' failure implicitly
become a 'delete' that leaks refcount in act_vlan module:

 # rmmod act_vlan; modprobe act_vlan
 # tc action add action vlan push id 5 index 100
 # tc action replace action vlan push id 7 index 100
 RTNETLINK answers: Cannot allocate memory
 We have an error talking to the kernel
 # tc action list action vlan
 #
 # rmmod act_vlan
 rmmod: ERROR: Module act_vlan is in use

Fixes: 4c5b9d96 ("act_vlan: VLAN action rewrite to use RCU lock/unlock and update")
Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__tcf_ipt_init() can fail after the idr has been successfully reserved.
When this happens, subsequent attempts to configure xt/ipt rules using
the same idr value systematically fail with -ENOSPC:

 # tc action add action xt -j LOG --log-prefix test1 index 100
 tablename: mangle hook: NF_IP_POST_ROUTING
         target:  LOG level warning prefix "test1" index 100
 RTNETLINK answers: Cannot allocate memory
 We have an error talking to the kernel
 Command "(null)" is unknown, try "tc actions help".
 # tc action add action xt -j LOG --log-prefix test1 index 100
 tablename: mangle hook: NF_IP_POST_ROUTING
         target:  LOG level warning prefix "test1" index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 Command "(null)" is unknown, try "tc actions help".
 # tc action add action xt -j LOG --log-prefix test1 index 100
 tablename: mangle hook: NF_IP_POST_ROUTING
         target:  LOG level warning prefix "test1" index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 ...

Fix this in the error path of __tcf_ipt_init(), calling tcf_idr_release()
in place of tcf_idr_cleanup(). Since tcf_ipt_release() can now be called
when tcfi_t is NULL, we also need to protect calls to ipt_destroy_target()
to avoid NULL pointer dereference.

Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcf_pedit_init() can fail to allocate 'keys' after the idr has been
successfully reserved. When this happens, subsequent attempts to configure
a pedit rule using the same idr value systematically fail with -ENOSPC:

 # tc action add action pedit munge ip ttl set 63 index 100
 RTNETLINK answers: Cannot allocate memory
 We have an error talking to the kernel
 # tc action add action pedit munge ip ttl set 63 index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 # tc action add action pedit munge ip ttl set 63 index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 ...

Fix this in the error path of tcf_act_pedit_init(), calling
tcf_idr_release() in place of tcf_idr_cleanup().

Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcf_act_police_init() can fail after the idr has been successfully
reserved (e.g., qdisc_get_rtab() may return NULL). When this happens,
subsequent attempts to configure a police rule using the same idr value
systematiclly fail with -ENOSPC:

 # tc action add action police rate 1000 burst 1000 drop index 100
 RTNETLINK answers: Cannot allocate memory
 We have an error talking to the kernel
 # tc action add action police rate 1000 burst 1000 drop index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 # tc action add action police rate 1000 burst 1000 drop index 100
 RTNETLINK answers: No space left on device
 ...

Fix this in the error path of tcf_act_police_init(), calling
tcf_idr_release() in place of tcf_idr_cleanup().

Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

if the kernel fails to duplicate 'sdata', creation of a new action fails
with -ENOMEM. However, subsequent attempts to install the same action
using the same value of 'index' systematically fail with -ENOSPC, and
that value of 'index' will no more be usable by act_simple, until rmmod /
insmod of act_simple.ko is done:

 # tc actions add action simple sdata hello index 100
 # tc actions list action simple

        action order 0: Simple <hello>
         index 100 ref 1 bind 0
 # tc actions flush action simple
 # tc actions add action simple sdata hello index 100
 RTNETLINK answers: Cannot allocate memory
 We have an error talking to the kernel
 # tc actions flush action simple
 # tc actions add action simple sdata hello index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 # tc actions add action simple sdata hello index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 ...

Fix this in the error path of tcf_simp_init(), calling tcf_idr_release()
in place of tcf_idr_cleanup().

Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR")
Suggested-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

when the following command sequence is entered

 # tc action add action bpf bytecode '4,40 0 0 12,31 0 1 2048,6 0 0 262144,6 0 0 0' index 100
 RTNETLINK answers: Invalid argument
 We have an error talking to the kernel
 # tc action add action bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' index 100
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel

act_bpf correctly refuses to install the first TC rule, because 31 is not
a valid instruction. However, it refuses to install the second TC rule,
even if the BPF code is correct. Furthermore, it's no more possible to
install any other rule having the same value of 'index' until act_bpf
module is unloaded/inserted again. After the idr has been reserved, call
tcf_idr_release() instead of tcf_idr_cleanup(), to fix this issue.

Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial fix to spelling mistakes in DP_ERR error message text and
comments
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in BNX2X_ERR error message text
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NSudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2018-03-21

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Follow-up fix to the fault injection framework to prevent jump
   optimization on the kprobe by installing a dummy post-handler,
   from Masami.

2) Drop bpf_perf_prog_read_value helper from tracepoint type programs
   which was mistakenly added there and would otherwise crash due to
   wrong input context, from Yonghong.

3) Fix a crash in BPF fs when compiled with clang. Code appears to
   be fine just that clang tries to overly aggressive optimize in
   non C conform ways, therefore fix the kernel's Makefile to
   generally prevent such issues, from Daniel.

4) Skip unnecessary capability checks in bpf syscall, which is otherwise
   triggering unnecessary security hooks on capability checking and
   causing false alarms on unprivileged processes trying to access
   CAP_SYS_ADMIN restricted infra, from Chenbo.

5) Fix the test_bpf.ko module when CONFIG_BPF_JIT_ALWAYS_ON is set
   with regards to a test case that is really just supposed to fail
   on x8_64 JIT but not others, from Thadeu.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prasad reported that he has seen crashes in BPF subsystem with netd
on Android with arm64 in the form of (note, the taint is unrelated):

  [ 4134.721483] Unable to handle kernel paging request at virtual address 800000001
  [ 4134.820925] Mem abort info:
  [ 4134.901283]   Exception class = DABT (current EL), IL = 32 bits
  [ 4135.016736]   SET = 0, FnV = 0
  [ 4135.119820]   EA = 0, S1PTW = 0
  [ 4135.201431] Data abort info:
  [ 4135.301388]   ISV = 0, ISS = 0x00000021
  [ 4135.359599]   CM = 0, WnR = 0
  [ 4135.470873] user pgtable: 4k pages, 39-bit VAs, pgd = ffffffe39b946000
  [ 4135.499757] [0000000800000001] *pgd=0000000000000000, *pud=0000000000000000
  [ 4135.660725] Internal error: Oops: 96000021 [#1] PREEMPT SMP
  [ 4135.674610] Modules linked in:
  [ 4135.682883] CPU: 5 PID: 1260 Comm: netd Tainted: G S      W       4.14.19+ #1
  [ 4135.716188] task: ffffffe39f4aa380 task.stack: ffffff801d4e0000
  [ 4135.731599] PC is at bpf_prog_add+0x20/0x68
  [ 4135.741746] LR is at bpf_prog_inc+0x20/0x2c
  [ 4135.751788] pc : [<ffffff94ab7ad584>] lr : [<ffffff94ab7ad638>] pstate: 60400145
  [ 4135.769062] sp : ffffff801d4e3ce0
  [...]
  [ 4136.258315] Process netd (pid: 1260, stack limit = 0xffffff801d4e0000)
  [ 4136.273746] Call trace:
  [...]
  [ 4136.442494] 3ca0: ffffff94ab7ad584 0000000060400145 ffffffe3a01bf8f8 0000000000000006
  [ 4136.460936] 3cc0: 0000008000000000 ffffff94ab844204 ffffff801d4e3cf0 ffffff94ab7ad584
  [ 4136.479241] [<ffffff94ab7ad584>] bpf_prog_add+0x20/0x68
  [ 4136.491767] [<ffffff94ab7ad638>] bpf_prog_inc+0x20/0x2c
  [ 4136.504536] [<ffffff94ab7b5d08>] bpf_obj_get_user+0x204/0x22c
  [ 4136.518746] [<ffffff94ab7ade68>] SyS_bpf+0x5a8/0x1a88

Android's netd was basically pinning the uid cookie BPF map in BPF
fs (/sys/fs/bpf/traffic_cookie_uid_map) and later on retrieving it
again resulting in above panic. Issue is that the map was wrongly
identified as a prog! Above kernel was compiled with clang 4.0,
and it turns out that clang decided to merge the bpf_prog_iops and
bpf_map_iops into a single memory location, such that the two i_ops
could then not be distinguished anymore.

Reason for this miscompilation is that clang has the more aggressive
-fmerge-all-constants enabled by default. In fact, clang source code
has a comment about it in lib/AST/ExprConstant.cpp on why it is okay
to do so:

  Pointers with different bases cannot represent the same object.
  (Note that clang defaults to -fmerge-all-constants, which can
  lead to inconsistent results for comparisons involving the address
  of a constant; this generally doesn't matter in practice.)

The issue never appeared with gcc however, since gcc does not enable
-fmerge-all-constants by default and even *explicitly* states in
it's option description that using this flag results in non-conforming
behavior, quote from man gcc:

  Languages like C or C++ require each variable, including multiple
  instances of the same variable in recursive calls, to have distinct
  locations, so using this option results in non-conforming behavior.

There are also various clang bug reports open on that matter [1],
where clang developers acknowledge the non-conforming behavior,
and refer to disabling it with -fno-merge-all-constants. But even
if this gets fixed in clang today, there are already users out there
that triggered this. Thus, fix this issue by explicitly adding
-fno-merge-all-constants to the kernel's Makefile to generically
disable this optimization, since potentially other places in the
kernel could subtly break as well.

Note, there is also a flag called -fmerge-constants (not supported
by clang), which is more conservative and only applies to strings
and it's enabled in gcc's -O/-O2/-O3/-Os optimization levels. In
gcc's code, the two flags -fmerge-{all-,}constants share the same
variable internally, so when disabling it via -fno-merge-all-constants,
then we really don't merge any const data (e.g. strings), and text
size increases with gcc (14,927,214 -> 14,942,646 for vmlinux.o).

  $ gcc -fverbose-asm -O2 foo.c -S -o foo.S
    -> foo.S lists -fmerge-constants under options enabled
  $ gcc -fverbose-asm -O2 -fno-merge-all-constants foo.c -S -o foo.S
    -> foo.S doesn't list -fmerge-constants under options enabled
  $ gcc -fverbose-asm -O2 -fno-merge-all-constants -fmerge-constants foo.c -S -o foo.S
    -> foo.S lists -fmerge-constants under options enabled

Thus, as a workaround we need to set both -fno-merge-all-constants
*and* -fmerge-constants in the Makefile in order for text size to
stay as is.

  [1] https://bugs.llvm.org/show_bug.cgi?id=18538Reported-by: NPrasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Richard Smith <richard-llvm@metafoo.co.uk>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: linux-kernel@vger.kernel.org
Tested-by: NPrasad Sodagudi <psodagud@codeaurora.org>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

The current check statement in BPF syscall will do a capability check
for CAP_SYS_ADMIN before checking sysctl_unprivileged_bpf_disabled. This
code path will trigger unnecessary security hooks on capability checking
and cause false alarms on unprivileged process trying to get CAP_SYS_ADMIN
access. This can be resolved by simply switch the order of the statement
and CAP_SYS_ADMIN is not required anyway if unprivileged bpf syscall is
allowed.
Signed-off-by: NChenbo Feng <fengc@google.com>
Acked-by: NLorenzo Colitti <lorenzo@google.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Commit 4bebdc7a ("bpf: add helper bpf_perf_prog_read_value")
added helper bpf_perf_prog_read_value so that perf_event type program
can read event counter and enabled/running time.
This commit, however, introduced a bug which allows this helper
for tracepoint type programs. This is incorrect as bpf_perf_prog_read_value
needs to access perf_event through its bpf_perf_event_data_kern type context,
which is not available for tracepoint type program.

This patch fixed the issue by separating bpf_func_proto between tracepoint
and perf_event type programs and removed bpf_perf_prog_read_value
from tracepoint func prototype.

Fixes: 4bebdc7a ("bpf: add helper bpf_perf_prog_read_value")
Reported-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Function bpf_fill_maxinsns11 is designed to not be able to be JITed on
x86_64. So, it fails when CONFIG_BPF_JIT_ALWAYS_ON=y, and
commit 09584b40 ("bpf: fix selftests/bpf test_kmod.sh failure when
CONFIG_BPF_JIT_ALWAYS_ON=y") makes sure that failure is detected on that
case.

However, it does not fail on other architectures, which have a different
JIT compiler design. So, test_bpf has started to fail to load on those.

After this fix, test_bpf loads fine on both x86_64 and ppc64el.

Fixes: 09584b40 ("bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y")
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Fixes: 2f987a76 ("net: ipv6: keep sk status consistent after datagram connect failure")
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.16-20180319' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2018-03-19

this is a pull reqeust of one patch for net/master.

The patch is by Andri Yngvason and fixes a potential use-after-free bug
in the cc770 driver introduced in the previous pull-request.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

cppcheck report:
[drivers/net/ethernet/cortina/gemini.c:543]: (error) Memory leak: skb_tab
Signed-off-by: NIgor Pylypiv <igor.pylypiv@gmail.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the optional regulator is deferred, we must release some resources.
They will be re-allocated when the probe function will be called again.

Fixes: 6eacf311 ("ethernet: arc: Add support for Rockchip SoC layer device tree bindings")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current code performs unneeded free. Remove the redundant skb freeing
during the error path.

Fixes: 1555d204 ("devlink: Support for pipeline debug (dpipe)")
Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NIgor Pylypiv <ipylypiv@silver-peak.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Johan Hedberg says:

====================
Here are a few more important Bluetooth driver fixes for the 4.16
kernel.

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Grygorii Strashko says:

====================
net: phy: relax error checking when creating sysfs link netdev->phydev

Some ethernet drivers (like TI CPSW) may connect and manage >1 Net PHYs per
one netdevice, as result such drivers will produce warning during system
boot and fail to connect second phy to netdevice when PHYLIB framework
will try to create sysfs link netdev->phydev for second PHY
in phy_attach_direct(), because sysfs link with the same name has been
created already for the first PHY.
As result, second CPSW external port will became unusable.
This regression was introduced by commits:
5568363f ("net: phy: Create sysfs reciprocal links for attached_dev/phydev"
a3995460 ("net: phy: Relax error checking on sysfs_create_link()"

Patch 1: exports sysfs_create_link_nowarn() function as preparation for Patch 2.
Patch 2: relaxes error checking when PHYLIB framework is creating sysfs
link netdev->phydev in phy_attach_direct(), suppresses warning by using
sysfs_create_link_nowarn() and adds error message instead, so links creation
failure is not fatal any more and system can continue working,
which fixes TI CPSW issue and makes boot logs accessible
in case of NFS boot, for example.

This can be stable material 4.13+.

Changes in v2:
- commit messages updated.

v1:
 https://patchwork.ozlabs.org/cover/886058/
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some ethernet drivers (like TI CPSW) may connect and manage >1 Net PHYs per
one netdevice, as result such drivers will produce warning during system
boot and fail to connect second phy to netdevice when PHYLIB framework
will try to create sysfs link netdev->phydev for second PHY
in phy_attach_direct(), because sysfs link with the same name has been
created already for the first PHY. As result, second CPSW external
port will became unusable.

Fix it by relaxing error checking when PHYLIB framework is creating sysfs
link netdev->phydev in phy_attach_direct(), suppressing warning by using
sysfs_create_link_nowarn() and adding error message instead.
After this change links (phy->netdev and netdev->phy) creation failure is not
fatal any more and system can continue working, which fixes TI CPSW issue.

Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Fixes: a3995460 ("net: phy: Relax error checking on sysfs_create_link()")
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The sysfs_create_link_nowarn() is going to be used in phylib framework in
subsequent patch which can be built as module. Hence, export
sysfs_create_link_nowarn() to avoid build errors.

Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Fixes: a3995460 ("net: phy: Relax error checking on sysfs_create_link()")
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes use after free introduced by the last cc770 patch.
Signed-off-by: NAndri Yngvason <andri.yngvason@marel.com>
Fixes: 74620123 ("can: cc770: Fix queue stall & dropped RTR reply")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

When unbinding/removing the driver, we will run into the following warnings:

[  259.655198] fec 400d1000.ethernet: 400d1000.ethernet supply phy not found, using dummy regulator
[  259.665065] fec 400d1000.ethernet: Unbalanced pm_runtime_enable!
[  259.672770] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
[  259.683062] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: f2:3e:93:b7:29:c1
[  259.696239] libphy: fec_enet_mii_bus: probed

Avoid these warnings by balancing the runtime PM calls during fec_drv_remove().
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

batadv_check_unicast_ttvn may redirect a packet to itself or another
originator. This involves rewriting the ttvn and the destination address in
the batadv unicast header. These field were not yet pulled (with skb rcsum
update) and thus any change to them also requires a change in the receive
checksum.
Reported-by: NMatthias Schiffer <mschiffer@universe-factory.net>
Fixes: a73105b8 ("batman-adv: improved client announcement mechanism")
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

Fixes: a9a08845 ("vfs: do bulk POLL* -> EPOLL* replacement")
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

'Commit 45dac1d6 ("vmxnet3: Changes for vmxnet3 adapter version 2
(fwd)")' introduced a flag "lro" in structure vmxnet3_adapter which is
used to indicate whether LRO is enabled or not. However, the patch
did not set the flag and hence it was never exercised.

So, when LRO is enabled, it resulted in poor TCP performance due to
delayed acks. This issue is seen with packets which are larger than
the mss getting a delayed ack rather than an immediate ack, thus
resulting in high latency.

This patch removes the lro flag and directly uses device features
against NETIF_F_LRO to check if lro is enabled.

Fixes: 45dac1d6 ("vmxnet3: Changes for vmxnet3 adapter version 2 (fwd)")
Reported-by: NRachel Lunnon <rachel_lunnon@stormagic.com>
Signed-off-by: NRonak Doshi <doshir@vmware.com>
Acked-by: NShrikrishna Khare <skhare@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The field txNumDeferred is used by the driver to keep track of the number
of packets it has pushed to the emulation. The driver increments it on
pushing the packet to the emulation and the emulation resets it to 0 at
the end of the transmit.

There is a possibility of a race either when (a) ESX is under heavy load or
(b) workload inside VM is of low packet rate.

This race results in xmit hangs when network coalescing is disabled. This
change creates a local copy of txNumDeferred and uses it to perform ring
arithmetic.
Reported-by: NNoriho Tanaka <ntanaka@vmware.com>
Signed-off-by: NRonak Doshi <doshir@vmware.com>
Acked-by: NShrikrishna Khare <skhare@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Davide Caratti says:

====================
net/sched: fix NULL dereference in the error path of .init()

with several TC actions it's possible to see NULL pointer dereference,
when the .init() function calls tcf_idr_alloc(), fails at some point and
then calls tcf_idr_release(): this series fixes all them introducing
non-NULL tests in the .cleanup() function.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

when the following command

 # tc action replace action skbmod swap mac index 100

is run for the first time, and tcf_skbmod_init() fails to allocate struct
tcf_skbmod_params, tcf_skbmod_cleanup() calls kfree_rcu(NULL), thus
causing the following error:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
 IP: __call_rcu+0x23/0x2b0
 PGD 8000000034057067 P4D 8000000034057067 PUD 74937067 PMD 0
 Oops: 0002 [#1] SMP PTI
 Modules linked in: act_skbmod(E) psample ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec crct10dif_pclmul mbcache jbd2 crc32_pclmul snd_hda_core ghash_clmulni_intel snd_hwdep pcbc snd_seq snd_seq_device snd_pcm aesni_intel snd_timer crypto_simd glue_helper snd cryptd virtio_balloon joydev soundcore pcspkr i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_console virtio_net virtio_blk ata_piix libata crc32c_intel virtio_pci serio_raw virtio_ring virtio i2c_core floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_skbmod]
 CPU: 3 PID: 3144 Comm: tc Tainted: G            E    4.16.0-rc4.act_vlan.orig+ #403
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:__call_rcu+0x23/0x2b0
 RSP: 0018:ffffbd2e403e7798 EFLAGS: 00010246
 RAX: ffffffffc0872080 RBX: ffff981d34bff780 RCX: 00000000ffffffff
 RDX: ffffffff922a5f00 RSI: 0000000000000000 RDI: 0000000000000000
 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000021f
 R10: 000000003d003000 R11: 0000000000aaaaaa R12: 0000000000000000
 R13: ffffffff922a5f00 R14: 0000000000000001 R15: ffff981d3b698c2c
 FS:  00007f3678292740(0000) GS:ffff981d3fd80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000008 CR3: 000000007c57a006 CR4: 00000000001606e0
 Call Trace:
  __tcf_idr_release+0x79/0xf0
  tcf_skbmod_init+0x1d1/0x210 [act_skbmod]
  tcf_action_init_1+0x2cc/0x430
  tcf_action_init+0xd3/0x1b0
  tc_ctl_action+0x18b/0x240
  rtnetlink_rcv_msg+0x29c/0x310
  ? _cond_resched+0x15/0x30
  ? __kmalloc_node_track_caller+0x1b9/0x270
  ? rtnl_calcit.isra.28+0x100/0x100
  netlink_rcv_skb+0xd2/0x110
  netlink_unicast+0x17c/0x230
  netlink_sendmsg+0x2cd/0x3c0
  sock_sendmsg+0x30/0x40
  ___sys_sendmsg+0x27a/0x290
  ? filemap_map_pages+0x34a/0x3a0
  ? __handle_mm_fault+0xbfd/0xe20
  __sys_sendmsg+0x51/0x90
  do_syscall_64+0x6e/0x1a0
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
 RIP: 0033:0x7f36776a3ba0
 RSP: 002b:00007fff4703b618 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 00007fff4703b740 RCX: 00007f36776a3ba0
 RDX: 0000000000000000 RSI: 00007fff4703b690 RDI: 0000000000000003
 RBP: 000000005aaaba36 R08: 0000000000000002 R09: 0000000000000000
 R10: 00007fff4703b0a0 R11: 0000000000000246 R12: 0000000000000000
 R13: 00007fff4703b754 R14: 0000000000000001 R15: 0000000000669f60
 Code: 5d e9 42 da ff ff 66 90 0f 1f 44 00 00 41 57 41 56 41 55 49 89 d5 41 54 55 48 89 fd 53 48 83 ec 08 40 f6 c7 07 0f 85 19 02 00 00 <48> 89 75 08 48 c7 45 00 00 00 00 00 9c 58 0f 1f 44 00 00 49 89
 RIP: __call_rcu+0x23/0x2b0 RSP: ffffbd2e403e7798
 CR2: 0000000000000008

Fix it in tcf_skbmod_cleanup(), ensuring that kfree_rcu(p, ...) is called
only when p is not NULL.

Fixes: 86da71b5 ("net_sched: Introduce skbmod action")
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

when the following command

 # tc action add action sample rate 100 group 100 index 100

is run for the first time, and psample_group_get(100) fails to create a
new group, tcf_sample_cleanup() calls psample_group_put(NULL), thus
causing the following error:

 BUG: unable to handle kernel NULL pointer dereference at 000000000000001c
 IP: psample_group_put+0x15/0x71 [psample]
 PGD 8000000075775067 P4D 8000000075775067 PUD 7453c067 PMD 0
 Oops: 0002 [#1] SMP PTI
 Modules linked in: act_sample(E) psample ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core mbcache jbd2 crct10dif_pclmul snd_hwdep crc32_pclmul snd_seq ghash_clmulni_intel pcbc snd_seq_device snd_pcm aesni_intel crypto_simd snd_timer glue_helper snd cryptd joydev pcspkr i2c_piix4 soundcore virtio_balloon nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_net ata_piix virtio_console virtio_blk libata serio_raw crc32c_intel virtio_pci i2c_core virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_tunnel_key]
 CPU: 2 PID: 5740 Comm: tc Tainted: G            E    4.16.0-rc4.act_vlan.orig+ #403
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:psample_group_put+0x15/0x71 [psample]
 RSP: 0018:ffffb8a80032f7d0 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000024
 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffffc06d93c0
 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
 R10: 00000000bd003000 R11: ffff979fba04aa59 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: ffff979fbba3f22c
 FS:  00007f7638112740(0000) GS:ffff979fbfd00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000000000000001c CR3: 00000000734ea001 CR4: 00000000001606e0
 Call Trace:
  __tcf_idr_release+0x79/0xf0
  tcf_sample_init+0x125/0x1d0 [act_sample]
  tcf_action_init_1+0x2cc/0x430
  tcf_action_init+0xd3/0x1b0
  tc_ctl_action+0x18b/0x240
  rtnetlink_rcv_msg+0x29c/0x310
  ? _cond_resched+0x15/0x30
  ? __kmalloc_node_track_caller+0x1b9/0x270
  ? rtnl_calcit.isra.28+0x100/0x100
  netlink_rcv_skb+0xd2/0x110
  netlink_unicast+0x17c/0x230
  netlink_sendmsg+0x2cd/0x3c0
  sock_sendmsg+0x30/0x40
  ___sys_sendmsg+0x27a/0x290
  ? filemap_map_pages+0x34a/0x3a0
  ? __handle_mm_fault+0xbfd/0xe20
  __sys_sendmsg+0x51/0x90
  do_syscall_64+0x6e/0x1a0
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
 RIP: 0033:0x7f7637523ba0
 RSP: 002b:00007fff0473ef58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 00007fff0473f080 RCX: 00007f7637523ba0
 RDX: 0000000000000000 RSI: 00007fff0473efd0 RDI: 0000000000000003
 RBP: 000000005aaaac80 R08: 0000000000000002 R09: 0000000000000000
 R10: 00007fff0473e9e0 R11: 0000000000000246 R12: 0000000000000000
 R13: 00007fff0473f094 R14: 0000000000000001 R15: 0000000000669f60
 Code: be 02 00 00 00 48 89 df e8 a9 fe ff ff e9 7c ff ff ff 0f 1f 40 00 0f 1f 44 00 00 53 48 89 fb 48 c7 c7 c0 93 6d c0 e8 db 20 8c ef <83> 6b 1c 01 74 10 48 c7 c7 c0 93 6d c0 ff 14 25 e8 83 83 b0 5b
 RIP: psample_group_put+0x15/0x71 [psample] RSP: ffffb8a80032f7d0
 CR2: 000000000000001c

Fix it in tcf_sample_cleanup(), ensuring that calls to psample_group_put(p)
are done only when p is not NULL.

Fixes: cadb9c9f ("net/sched: act_sample: Fix error path in init")
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>