Userspace likes to get notified that the disk may have changed, when
rescan_partitions() is called after partitioning or media change. It will
make it possible to update the state of the disk with the "change" event,
before the following partition "add" events are handled.

Cc: David Zeuthen <david@fubar.dk>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I've just found how easy it is to accidentally register a sysdev_driver for
two different classes.  When this happens, bad things happen as the
sysdev_driver structure keeps has the list entry for the driver
registration.

The following patch makes a WARN_ON() if this happens, although I think
BUG_ON or returning -EAGAIN could also be valid responses to this.
Signed-off-by: NBen Dooks <ben@fluff.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix following warning:
WARNING: vmlinux.o(.text+0x64609c): Section mismatch in reference from the function store_online() to the function .cpuinit.text:cpu_up()

store_online() is defined inside a HOTPLUG_CPU block so references are OK. 
Ignore references by annotating store_online() with __ref.

Note: This is needed because cpu_up() most likely should not have been
__cpuinit but all the hotplug cpu code misuses the __cpuinit annotation.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

power_state is scheduled for removal, and it is used only for debug
prints by driver core. Remove it.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The current PNP combined card + devices module aliase can
never ever match anything, because these values are not available
all at the same time to request a module.

Instead of adding the combined alias, we add the device id's
all as individual aliases. Device id's are exported by the PNP
bus and can now properly used to request the loading of a
matching module.

The module snd-sbawe currently exports aliases, which can never
match anything:
  alias: pnp:cCTLXXXXdCTL0045dCTL0022*
  alias: pnp:cCTLXXXXdCTL0044dCTL0023*
  alias: pnp:cCTLXXXXdCTL0042dCTL0022*
  alias: pnp:cCTLXXXXdCTL0041dCTL0021*
  alias: pnp:cCTLXXXXdCTL0031dCTL0021*
  alias: pnp:cCTL00eddCTL0041dCTL0070*
  alias: pnp:cCTL00e9dCTL0045dCTL0022*
  alias: pnp:cCTL00e4dCTL0045dCTL0022*
  alias: pnp:cCTL00c7dCTL0045dCTL0022*
  alias: pnp:cCTL00c5dCTL0045dCTL0022*
  alias: pnp:cCTL00c3dCTL0045dCTL0022*
  alias: pnp:cCTL00c1dCTL0042dCTL0022*
  alias: pnp:cCTL00b2dCTL0044dCTL0023*
  alias: pnp:cCTL009edCTL0044dCTL0023*
  alias: pnp:cCTL009ddCTL0042dCTL0022*
  alias: pnp:cCTL009fdCTL0041dCTL0021*
  alias: pnp:cCTL009cdCTL0041dCTL0021*
  alias: pnp:cCTL009adCTL0041dCTL0021*
  alias: pnp:cCTL0054dCTL0031dCTL0021*
  alias: pnp:cCTL0048dCTL0031dCTL0021*
  alias: pnp:cCTL0047dCTL0031dCTL0021*
  alias: pnp:cCTL0046dCTL0031dCTL0021*
  alias: pnp:cCTL0045dCTL0031dCTL0021*
  alias: pnp:cCTL0044dCTL0031dCTL0021*
  alias: pnp:cCTL0043dCTL0031dCTL0021*
  alias: pnp:cCTL0042dCTL0031dCTL0021*
  alias: pnp:cCTL0039dCTL0031dCTL0021*
  alias: pnp:cCTL0035dCTL0031dCTL0021*

With this patch it exports only the device id's, as properly
matchable aliases:
  alias: pnp:dCTL0070*
  alias: pnp:dCTL0045*
  alias: pnp:dCTL0023*
  alias: pnp:dCTL0044*
  alias: pnp:dCTL0022*
  alias: pnp:dCTL0042*
  alias: pnp:dCTL0041*
  alias: pnp:dCTL0021*
  alias: pnp:dCTL0031*

Now, the exported value of the PNP bus can be used to autoload
a matching module:
  $ modprobe --first-time -n -v pnp:dCTL0045
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-rawmidi.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-hwdep.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb-common.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-csp.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-dsp.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/opl3/snd-opl3-lib.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sbawe.ko

  $ grep CTL0045 /sys/bus/pnp/devices/*/id
  /sys/bus/pnp/devices/01:01.00/id:CTL0045
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This fixes up a number of coding style issues in the firmware sample files.

Yeah, it still doesn't build properly yet, that's next...


Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move the firmware_class sample drivers to samples/ so that they are
buildable and can be maintained.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert sysfs_remove_bin_file() to have a return type of 'void' for
!CONFIG_SYSFS configurations.  Also removes unnecessary colons from empty
void functions.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Reviewed-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

driver core: Convert debug functions declared inline __attribute__((format (printf,x,y) to statement expression macros

When DEBUG is not defined, pr_debug and dev_dbg and some
other local debugging functions are specified as:

"inline __attribute__((format (printf, x, y)))"

This is done to validate printk arguments when not debugging.

Converting these functions to macros or statement expressions
"do { if (0) printk(fmt, ##arg); } while (0)"
or
"({ if (0) printk(fmt, ##arg); 0; })
makes at least gcc 4.2.2 produce smaller objects.

This has the additional benefit of allowing the optimizer to
avoid calling functions like print_mac that might have been
arguments to the printk.

defconfig x86 current:

$ size vmlinux
   text    data     bss     dec     hex filename
4716770  474560  618496 5809826  58a6a2 vmlinux

all converted: (More patches follow)

$ size vmlinux
   text    data     bss     dec     hex filename
4716642  474560  618496 5809698  58a622 vmlinux

Even kernel/sched.o, which doesn't even use these
functions, becomes smaller.

It appears that merely having an indirect include
of <linux/device.h> can cause bigger objects.

$ size sched.inline.o sched.if0.o
   text    data     bss     dec     hex filename
  31385    2854     328   34567    8707 sched.inline.o
  31366    2854     328   34548    86f4 sched.if0.o

The current preprocessed only kernel/sched.i file contains:

# 612 "include/linux/device.h"
static inline __attribute__((always_inline)) int __attribute__ ((format (printf, 2, 3)))
dev_dbg(struct device *dev, const char *fmt, ...)
{
 return 0;
}
# 628 "include/linux/device.h"
static inline __attribute__((always_inline)) int __attribute__ ((format (printf, 2, 3)))
dev_vdbg(struct device *dev, const char *fmt, ...)
{
 return 0;
}

Removing these unused inlines from sched.i shrinks sched.o
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

register_memory()/unregister_memory() never gets called with
"root". unregister_memory() is accessing kobject_name of
the object just freed up. Since no one uses the code,
lets take the code out. And also, make register_memory() static.

Another bug fix - before calling unregister_memory()
remove_memory_block() gets a ref on kobject. unregister_memory()
need to drop that ref before calling sysdev_unregister().
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NDaniel Walker <dwalker@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Otherwise the device might just disappear while /dev/uioX is being used
which results in an Oops.
Signed-off-by: NUwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: NHans J Koch <hjk@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch implements a UIO interface for the SMX Cryptengine.

The Cryptengine found on the Nias Digital SMX board is best suited
for a UIO interface.  It is not wired in to the cryptographic API
as the engine handles it's own keys, algorithms, everything.  All
that we know about is that if there's room in the buffer, you can
write data to it and when there's data ready, you read it out again.

There isn't necessarily even any direct correlation between data
going in and data coming out again, the engine may consume or
generate data all on its own.

This driver is for proprietary hardware but we're always told to
submit the drivers anyway; here you are.  :-)

This is version 4 of this patch and addresses all issues raised by
Hans-Jürgen Koch and Paul Mundt in their reviews.  Slightly altered
is Paul's suggestion to use DRV_NAME and DRV_VERSION as the UIO
version and name.  While at the moment they are the same, there
is no reason for them to stay that way.  Nevertheless we now at
least provide a MODULE_VERSION macro to keep modinfo happy.
Signed-off-by: NBen Nizette <bn@niasdigital.com>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NHans J Koch <hjk@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Meanwhile, PCI_DEVICE_ID_PLX_9030 is defined in pci_ids.h, no need to
define it again in the driver.
Signed-off-by: NHans J. Koch <hjk@linutronix.de>
CC: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Source drivers/uio/Kconfig to make UIO available in menuconfig if ARCH=arm.
Signed-off-by: NHans J Koch <hjk@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NDenis Cheng <crquan@gmail.com>
Signed-off-by: NHans J. Koch <hjk@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NDenis Cheng <crquan@gmail.com>
Signed-off-by: NHans J. Koch <hjk@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add warnings to kobject_put() to catch kobjects that are cleaned up but
were never initialized to begin with.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  security: fix up documentation for security_module_enable
  Security: Introduce security= boot parameter
  Audit: Final renamings and cleanup
  SELinux: use new audit hooks, remove redundant exports
  Audit: internally use the new LSM audit hooks
  LSM/Audit: Introduce generic Audit LSM hooks
  SELinux: remove redundant exports
  Netlink: Use generic LSM hook
  Audit: use new LSM hooks instead of SELinux exports
  SELinux: setup new inode/ipc getsecid hooks
  LSM: Introduce inode_getsecid and ipc_getsecid hooks

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits)
  [NET]: Fix and allocate less memory for ->priv'less netdevices
  [IPV6]: Fix dangling references on error in fib6_add().
  [NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found
  [PKT_SCHED]: Fix datalen check in tcf_simp_init().
  [INET]: Uninline the __inet_inherit_port call.
  [INET]: Drop the inet_inherit_port() call.
  SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked.
  [netdrvr] forcedeth: internal simplifications; changelog removal
  phylib: factor out get_phy_id from within get_phy_device
  PHY: add BCM5464 support to broadcom PHY driver
  cxgb3: Fix __must_check warning with dev_dbg.
  tc35815: Statistics cleanup
  natsemi: fix MMIO for PPC 44x platforms
  [TIPC]: Cleanup of TIPC reference table code
  [TIPC]: Optimized initialization of TIPC reference table
  [TIPC]: Remove inlining of reference table locking routines
  e1000: convert uint16_t style integers to u16
  ixgb: convert uint16_t style integers to u16
  sb1000.c: make const arrays static
  sb1000.c: stop inlining largish static functions
  ...

security_module_enable() can only be called during kernel init.
Signed-off-by: NJames Morris <jmorris@namei.org>

Add the security= boot parameter. This is done to avoid LSM
registration clashes in case of more than one bult-in module.

User can choose a security module to enable at boot. If no
security= boot parameter is specified, only the first LSM
asking for registration will be loaded. An invalid security
module name will be treated as if no module has been chosen.

LSM modules must check now if they are allowed to register
by calling security_module_enable(ops) first. Modify SELinux
and SMACK to do so.

Do not let SMACK register smackfs if it was not chosen on
boot. Smackfs assumes that smack hooks are registered and
the initial task security setup (swapper->security) is done.
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>

Rename the se_str and se_rule audit fields elements to
lsm_str and lsm_rule to avoid confusion.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>

Setup the new Audit LSM hooks for SELinux.
Remove the now redundant exported SELinux Audit interface.

Audit: Export 'audit_krule' and 'audit_field' to the public
since their internals are needed by the implementation of the
new LSM hook 'audit_rule_known'.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>

Convert Audit to use the new LSM Audit hooks instead of
the exported SELinux interface.

Basically, use:
security_audit_rule_init
secuirty_audit_rule_free
security_audit_rule_known
security_audit_rule_match

instad of (respectively) :
selinux_audit_rule_init
selinux_audit_rule_free
audit_rule_has_selinux
selinux_audit_rule_match
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>

Introduce a generic Audit interface for security modules
by adding the following new LSM hooks:

audit_rule_init(field, op, rulestr, lsmrule)
audit_rule_known(krule)
audit_rule_match(secid, field, op, rule, actx)
audit_rule_free(rule)

Those hooks are only available if CONFIG_AUDIT is enabled.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>
Reviewed-by: NPaul Moore <paul.moore@hp.com>

Remove the following exported SELinux interfaces:
selinux_get_inode_sid(inode, sid)
selinux_get_ipc_sid(ipcp, sid)
selinux_get_task_sid(tsk, sid)
selinux_sid_to_string(sid, ctx, len)

They can be substitued with the following generic equivalents
respectively:
new LSM hook, inode_getsecid(inode, secid)
new LSM hook, ipc_getsecid*(ipcp, secid)
LSM hook, task_getsecid(tsk, secid)
LSM hook, sid_to_secctx(sid, ctx, len)
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>
Reviewed-by: NPaul Moore <paul.moore@hp.com>

Don't use SELinux exported selinux_get_task_sid symbol.
Use the generic LSM equivalent instead.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NPaul Moore <paul.moore@hp.com>

Stop using the following exported SELinux interfaces:
selinux_get_inode_sid(inode, sid)
selinux_get_ipc_sid(ipcp, sid)
selinux_get_task_sid(tsk, sid)
selinux_sid_to_string(sid, ctx, len)
kfree(ctx)

and use following generic LSM equivalents respectively:
security_inode_getsecid(inode, secid)
security_ipc_getsecid*(ipcp, secid)
security_task_getsecid(tsk, secid)
security_sid_to_secctx(sid, ctx, len)
security_release_secctx(ctx, len)

Call security_release_secctx only if security_secid_to_secctx
succeeded.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>
Reviewed-by: NPaul Moore <paul.moore@hp.com>

Setup the new inode_getsecid and ipc_getsecid() LSM hooks
for SELinux.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>
Reviewed-by: NPaul Moore <paul.moore@hp.com>

Introduce inode_getsecid(inode, secid) and ipc_getsecid(ipcp, secid)
LSM hooks. These hooks will be used instead of similar exported
SELinux interfaces.

Let {inode,ipc,task}_getsecid hooks set the secid to 0 by default
if CONFIG_SECURITY is not defined or if the hook is set to
NULL (dummy). This is done to notify the caller that no valid
secid exists.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>
Reviewed-by: NPaul Moore <paul.moore@hp.com>

This patch effectively reverts commit d0498d9a
aka "[NET]: Do not allocate unneeded memory for dev->priv alignment."
It was found to be buggy because of final unconditional += NETDEV_ALIGN_CONST
removal.

For example, for sizeof(struct net_device) being 2048 bytes, "alloc_size"
was also 2048 bytes, but allocator with debugging options turned on started
giving out !32-byte aligned memory resulting in redzones overwrites.

Patch does small optimization in ->priv'less case: bumping size to next
32-byte boundary was always done to ensure ->priv will also be aligned.
But, no ->priv, no need to do that.
Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

do not return a -EINVAL when mmap()-ing PCI holes.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (137 commits)
  [SCSI] iscsi: bidi support for iscsi_tcp
  [SCSI] iscsi: bidi support at the generic libiscsi level
  [SCSI] iscsi: extended cdb support
  [SCSI] zfcp: Fix error handling for blocked unit for send FCP command
  [SCSI] zfcp: Remove zfcp_erp_wait from slave destory handler to fix deadlock
  [SCSI] zfcp: fix 31 bit compile warnings
  [SCSI] bsg: no need to set BSG_F_BLOCK bit in bsg_complete_all_commands
  [SCSI] bsg: remove minor in struct bsg_device
  [SCSI] bsg: use better helper list functions
  [SCSI] bsg: replace kobject_get with blk_get_queue
  [SCSI] bsg: takes a ref to struct device in fops->open
  [SCSI] qla1280: remove version check
  [SCSI] libsas: fix endianness bug in sas_ata
  [SCSI] zfcp: fix compiler warning caused by poking inside new semaphore (linux-next)
  [SCSI] aacraid: Do not describe check_reset parameter with its value
  [SCSI] aacraid: Fix down_interruptible() to check the return value
  [SCSI] sun3_scsi_vme: add MODULE_LICENSE
  [SCSI] st: rename flush_write_buffer()
  [SCSI] tgt: use KMEM_CACHE macro
  [SCSI] initio: fix big endian problems for auto request sense
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (43 commits)
  firewire: cleanups
  firewire: fix synchronization of gap counts
  firewire: wait until PHY configuration packet was transmitted (fix bus reset loop)
  firewire: remove unused struct member
  firewire: use bitwise and to get reg in handle_registers
  firewire: replace more hex values with defined csr constants
  firewire: reread config ROM when device reset the bus
  firewire: replace static ROM cache by allocated cache
  firewire: fw-ohci: work around generation bug in TI controllers (fix AV/C and more)
  firewire: fw-ohci: extend logging of bus generations and node ID
  firewire: fw-ohci: conditionally log busReset interrupts
  firewire: fw-ohci: don't append to AT context when it's not active
  firewire: fw-ohci: log regAccessFail events
  firewire: fw-ohci: make sure HCControl register LPS bit is set
  firewire: fw-ohci: missing PPC PMac feature calls in failure path
  firewire: fw-ohci: untangle a mixed unsigned/signed expression
  firewire: debug interrupt events
  firewire: fw-ohci: catch self_id_count == 0
  firewire: fw-ohci: add self ID error check
  firewire: fw-ohci: refactor probe, remove, suspend, resume
  ...

The kernel now panics reliably on boot if you have a SATAPI device
connected.

The problem was introduced by the libata merge trying to pull out all
the SFF code into a separate module.  Unfortunately, if you're a satapi
device you usually need to call atapi_request_sense, which has a bare
invocation of a SFF callback which is NULL on non-SFF HBAs.  Fix this by
making the call conditional.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (64 commits)
  ocfs2/net: Add debug interface to o2net
  ocfs2: Only build ocfs2/dlm with the o2cb stack module
  ocfs2/cluster: Get rid of arguments to the timeout routines
  ocfs2: Put tree in MAINTAINERS
  ocfs2: Use BUG_ON
  ocfs2: Convert ocfs2 over to unlocked_ioctl
  ocfs2: Improve rename locking
  fs/ocfs2/aops.c: test for IS_ERR rather than 0
  ocfs2: Add inode stealing for ocfs2_reserve_new_inode
  ocfs2: Add ac_alloc_slot in ocfs2_alloc_context
  ocfs2: Add a new parameter for ocfs2_reserve_suballoc_bits
  ocfs2: Enable cross extent block merge.
  ocfs2: Add support for cross extent block
  ocfs2: Move /sys/o2cb to /sys/fs/o2cb
  sysfs: Allow removal of symlinks in the sysfs root
  ocfs2:  Reconnect after idle time out.
  ocfs2/dlm: Cleanup lockres print
  ocfs2/dlm: Fix lockname in lockres print function
  ocfs2/dlm: Move dlm_print_one_mle() from dlmmaster.c to dlmdebug.c
  ocfs2/dlm: Dumps the purgelist into a debugfs file
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (49 commits)
  [GFS2] fix assertion in log_refund()
  [GFS2] fix GFP_KERNEL misuses
  [GFS2] test for IS_ERR rather than 0
  [GFS2] Invalidate cache at correct point
  [GFS2] fs/gfs2/recovery.c: suppress warnings
  [GFS2] Faster gfs2_bitfit algorithm
  [GFS2] Streamline quota lock/check for no-quota case
  [GFS2] Remove drop of module ref where not needed
  [GFS2] gfs2_adjust_quota has broken unstuffing code
  [GFS2] possible null pointer dereference fixup
  [GFS2] Need to ensure that sector_t is 64bits for GFS2
  [GFS2] re-support special inode
  [GFS2] remove gfs2_dev_iops
  [GFS2] fix file_system_type leak on gfs2meta mount
  [GFS2] Allow bmap to allocate extents
  [GFS2] Fix a page lock / glock deadlock
  [GFS2] proper extern for gfs2/locking/dlm/mount.c:gdlm_ops
  [GFS2] gfs2/ops_file.c should #include "ops_inode.h"
  [GFS2] be*_add_cpu conversion
  [GFS2] Fix bug where we called drop_bh incorrectly
  ...

TF_MASK is no longer defined, use X86_EFLAGS_TF.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

access the right scsi_in() and/or scsi_out() side of things.
also for resid
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Reviewed-by: NPete Wyckoff <pw@osc.edu>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>