This patch makes powercontainment feature configurable. Currently, the
powercontainment is not very stable, so add a module parameter to
enable/disable it via user mode.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove the job reference counting and just properly destroy it from a
work item which blocks on any potential running timeout handler.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The driver shouldn't mess with the scheduler internals.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This extends OD (OverDrive) support to the non-Powerplay code paths.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This extends dpm clock level selection to the non-powerplay code paths.
This interface can be used to select individual clock levels.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a new sysfs entry pp_sclk_od to support sclk overdrive(OD) overclocking,
the entry is read/write, the value of input/output is an integer which is the
over percentage of the highest sclk.

v2: drop extra semicolon
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 2ba272d7.

The issue fixed by this patch is specific to compute rings and the
previous patch was enough.  Additionally, this patch as been traced
to strange behavior on some CZ systems so we might as well drop it.

When executing in a PCI passthrough based virtuzliation environemnt, the
hypervisor will usually attempt to send a PCIe bus reset signal to the
ASIC when the VM reboots. In this scenario, the card is not correctly
initialized, but we still consider it to be posted. Therefore, in a
passthrough based environemnt we should always post the card to guarantee
it is in a good state for driver initialization.

However, if we are operating in SR-IOV mode it is up to the GIM driver
to manage the asic state, therefore we should not post the card (and
shouldn't be able to do it either).

v2: add missing semi-colon
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andres.rodriguez@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since vmid-mgr supports vmid sharing in one vm, the same ctx could
get different vmids for two emits without vm flush, vm_flush could
be done in another ring.
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fence contexts are created on the fly (for example) by the GPU scheduler used
in the amdgpu driver as a result of an userspace request. Because of this
userspace could in theory force a wrap around of the 32bit context number
if it doesn't behave well.

Avoid this by increasing the context number to 64bits. This way even when
userspace manages to allocate a billion contexts per second it takes more
than 500 years for the context number to wrap around.

v2: fix printf formats as well.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: NSumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464786612-5010-2-git-send-email-deathsimple@vodafone.de

This avoids problems with multiple GPUs.  For example,
if the first GPU failed before amdgpu_fence_init() was
called, amdgpu_fence_slab_ref is still 0 and it will
get decremented in amdgpu_fence_driver_fini().  This
will lead to a crash during init of the second GPU since
amdgpu_fence_slab_ref is not 0.

v2: add functions for init/exit instead of
    moving the variables into the driver.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We leaked the BO in the error pass, additional to that we only have
one user fence for all IBs in a job.

v2: remove white space changes
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

They are the same for all IBs.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We only have one context for all IBs.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It was a source of bugs to repeat that in each IP version.

v2: rename parameter
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use of the ctx pointer is not safe, because they are likely already
be assigned to another ctx when doing comparing.

v2: recreate from scratch, avoid all unnecessary changes.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When this flag is set, we program the hardware to execute the flip
during horizontal blank (i.e. for the next scanline) instead of during
vertical blank (i.e. for the next frame).

Ported from radeon commit:
drm/radeon: Support DRM_MODE_PAGE_FLIP_ASYNC

v2: drop DAL change for upstream
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fetch this info once at init and just store the results
for future requests.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is the result of running the following commands:
find drivers/gpu/drm/amd/ -name "*.h" -exec sed -i 's/[ \t]\+$//' {} \;
find drivers/gpu/drm/amd/ -name "*.c" -exec sed -i 's/[ \t]\+$//' {} \;
find drivers/gpu/drm/amd/ -name "*.h" -exec sed -i 's/ \+\t/\t/' {} \;
find drivers/gpu/drm/amd/ -name "*.c" -exec sed -i 's/ \+\t/\t/' {} \;

v2: drop changes to DAL and internal headers
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Just set it to zero instead.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise we could (in theory) run into problems on 32bit systems.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

ib.vm is a legacy way to get vm, after scheduler
implemented vm should be get from job, and all ibs
from one job share the same vm, no need to keep ib.vm
just move vm field to job.

this patch as well add job as paramter to ib_schedule
so it can get vm from job->vm.

v2: agd: sqaush in:
drm/amdgpu: check if ring emit_vm_flush exists in vm flush

No vm flush on engines that don't support VM.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=95195Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds a unique id for each vm client so we can
properly track them.
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds 3 new files that can be read/written to access
indirect GPU registers.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows us to have small BOs on the LRU before big ones.

v2: fix of by one and list corruption bug
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Different asics tend to have different ways to interact
with the RLC.  This just covers enter/exit of safe mode
for updating CG and PG state, but could be extended to
cover other RLC operations in the future if necessary.
Acked-by: NTom St Denis <tom.stdenis@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is just a type-safety things to avoid everyone taking void *,
it doesn't change anything.

v2: agd5f: split out the dal changes into a separate patch.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Change History
--------------

v2:
- Make firmware version check correctly. Firmware
  versions >= 1.80 should all support 40 UVD
  instances.
- Replace AMDGPU_MAX_UVD_HANDLES with max_handles
  variable.

v1:
- The firmware can handle upto 40 UVD sessions.
Signed-off-by: NArindam Nath <arindam.nath@amd.com>
Signed-off-by: NAyyappa Chandolu <ayyappa.chandolu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

All these are compile time constand and the
drm_debugfs_create/remove_files functions take a const
pointer argument.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NNils Wallménius <nils.wallmenius@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This marks the struct amdgpu_sched_ops const and
adjusts amd_sched_init to take a const pointer
for the ops param. The ops member of
struct amd_gpu_scheduler is also changed to const.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NNils Wallménius <nils.wallmenius@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch marks some compile-time constant tables 'const'.
The tables marked in this patch are the low hanging fruit
where little other changes were necesary to avoid casting
away constness etc. Also mark some tables that are private
to a file as static.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NNils Wallménius <nils.wallmenius@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This way we can track when the flush is done.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: rebase & cleanup

This way we can store more than one fence as user for each VMID.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> (v1)
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No need to have two of them any more.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Keeping the pages array around can use a lot of system memory
when you want a large GART.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Not needed any more.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this is to fix fatal page fault error that occured if:
job is signaled/released after its timeout work is already
put to the global queue (in this case the cancel_delayed_work
will return false), which will lead to NX-protection error
page fault during job_timeout_func.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>