Introduce amd_iommu_get_num_iommus(), which returns the value of
amd_iommus_present. The function is used to replace direct access to the
variable, which is now declared as static.

This function will also be used by AMD IOMMU perf driver.
Signed-off-by: NSuravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jörg Rödel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1487926102-13073-6-git-send-email-Suravee.Suthikulpanit@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Clean up coding style and fix a bug in the 64-bit register read logic
since it overwrites the upper 32-bit when reading the lower 32-bit.
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jörg Rödel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1487926102-13073-5-git-send-email-Suravee.Suthikulpanit@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Fix coding style and use GENMASK_ULL().
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jörg Rödel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1487926102-13073-4-git-send-email-Suravee.Suthikulpanit@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Clean up register initialization and make use of BIT_ULL(x) where
appropriate. This should not affect logic and functionality.
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jörg Rödel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1487926102-13073-3-git-send-email-Suravee.Suthikulpanit@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Declare pr_fmt() format for perf/amd_iommu and remove unnecessary
pr_debug() calls.

Also check return value when _init_events_attrs() fails and issue an
error message.
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jörg Rödel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1487926102-13073-2-git-send-email-Suravee.Suthikulpanit@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Now that Intel PT supports more types of trace content than just branch
tracing, it may be useful to allow the user to disable branch tracing
when it is not needed.

The special case is BDW, where not setting BranchEn is not supported.

This is slightly trickier than necessary, because up to this moment
the driver has been setting BranchEn automatically and the userspace
assumes as much. Instead of reversing the semantics of BranchEn, we
introduce a 'passthrough' bit, which will forego the default and allow
the user to set BranchEn to their heart's content.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20170206144140.14402-1-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull virtio fixes from Michael Tsirkin:
 "Fixes to multiple issues in virtio.

  Most notably a regression fix for crashes reported by Fedora users.
  Hibernate is still reportedly broken, working on it"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_balloon: prevent uninitialized variable use
  virtio-balloon: use actual number of stats for stats queue buffers
  virtio_balloon: init 1st buffer in stats vq
  virtio_pci: fix out of bound access for msix_names

Pull KVM fixes from Paolo Bonzini:
 "All x86-specific, apart from some arch-independent syzkaller fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: cleanup the page tracking SRCU instance
  KVM: nVMX: fix nested EPT detection
  KVM: pci-assign: do not map smm memory slot pages in vt-d page tables
  KVM: kvm_io_bus_unregister_dev() should never fail
  KVM: VMX: Fix enable VPID conditions
  KVM: nVMX: Fix nested VPID vmx exec control
  KVM: x86: correct async page present tracepoint
  kvm: vmx: Flush TLB when the APIC-access address changes
  KVM: x86: use pic/ioapic destructor when destroy vm
  KVM: x86: check existance before destroy
  KVM: x86: clear bus pointer when destroyed
  KVM: Documentation: document MCE ioctls
  KVM: nVMX: don't reset kvm mmu twice
  PTP: fix ptr_ret.cocci warnings
  kvm: fix usage of uninit spinlock in avic_vm_destroy()
  KVM: VMX: downgrade warning on unexpected exit code

The latest gcc-7.0.1 snapshot reports a new warning:

virtio/virtio_balloon.c: In function 'update_balloon_stats':
virtio/virtio_balloon.c:258:26: error: 'events[2]' is used uninitialized in this function [-Werror=uninitialized]
virtio/virtio_balloon.c:260:26: error: 'events[3]' is used uninitialized in this function [-Werror=uninitialized]
virtio/virtio_balloon.c:261:56: error: 'events[18]' is used uninitialized in this function [-Werror=uninitialized]
virtio/virtio_balloon.c:262:56: error: 'events[17]' is used uninitialized in this function [-Werror=uninitialized]

This seems absolutely right, so we should add an extra check to
prevent copying uninitialized stack data into the statistics.
>From all I can tell, this has been broken since the statistics code
was originally added in 2.6.34.

Fixes: 9564e138 ("virtio: Add memory statistics reporting to the balloon driver (V4)")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The virtio balloon driver contained a not-so-obvious invariant that
update_balloon_stats has to update exactly VIRTIO_BALLOON_S_NR counters
in order to send valid stats to the host. This commit fixes it by having
update_balloon_stats return the actual number of counters, and its
callers use it when pushing buffers to the stats virtqueue.

Note that it is still out of spec to change the number of counters
at run-time. "Driver MUST supply the same subset of statistics in all
buffers submitted to the statsq."
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

When init_vqs runs, virtio_balloon.stats is either uninitialized or
contains stale values. The host updates its state with garbage data
because it has no way of knowing that this is just a marker buffer
used for signaling.

This patch updates the stats before pushing the initial buffer.

Alternative fixes:
* Push an empty buffer in init_vqs. Not easily done with the current
  virtio implementation and violates the spec "Driver MUST supply the
  same subset of statistics in all buffers submitted to the statsq".
* Push a buffer with invalid tags in init_vqs. Violates the same
  spec clause, plus "invalid tag" is not really defined.

Note: the spec says:
	When using the legacy interface, the device SHOULD ignore all values in
	the first buffer in the statsq supplied by the driver after device
	initialization. Note: Historically, drivers supplied an uninitialized
	buffer in the first buffer.

Unfortunately QEMU does not seem to implement the recommendation
even for the legacy interface.

Cc: stable@vger.kernel.org
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Fedora has received multiple reports of crashes when running
4.11 as a guest

https://bugzilla.redhat.com/show_bug.cgi?id=1430297
https://bugzilla.redhat.com/show_bug.cgi?id=1434462
https://bugzilla.kernel.org/show_bug.cgi?id=194911
https://bugzilla.redhat.com/show_bug.cgi?id=1433899

The crashes are not always consistent but they are generally
some flavor of oops or GPF in virtio related code. Multiple people
have done bisections (Thank you Thorsten Leemhuis and
Richard W.M. Jones) and found this commit to be at fault

07ec5148 is the first bad commit
commit 07ec5148
Author: Christoph Hellwig <hch@lst.de>
Date:   Sun Feb 5 18:15:19 2017 +0100

    virtio_pci: use shared interrupts for virtqueues

The issue seems to be an out of bounds access to the msix_names
array corrupting kernel memory.

Fixes: 07ec5148 ("virtio_pci: use shared interrupts for virtqueues")
Reported-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NRichard W.M. Jones <rjones@redhat.com>
Tested-by: NThorsten Leemhuis <linux@leemhuis.info>

SRCU uses a delayed work item.  Skip cleaning it up, and
the result is use-after-free in the work item callbacks.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Suggested-by: NDmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: 0eb05bf2Reviewed-by: NXiao Guangrong <xiaoguangrong.eric@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The nested_ept_enabled flag introduced in commit 7ca29de2 was not
computed correctly. We are interested only in L1's EPT state, not the
the combined L0+L1 value.

In particular, if L0 uses EPT but L1 does not, nested_ept_enabled must
be false to make sure that PDPSTRs are loaded based on CR3 as usual,
because the special case described in 26.3.2.4 Loading Page-Directory-
Pointer-Table Entries does not apply.

Fixes: 7ca29de2 ("KVM: nVMX: fix CR3 load if L2 uses PAE paging and EPT")
Cc: qemu-stable@nongnu.org
Reported-by: NWanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

or VM memory are not put thus leaked in kvm_iommu_unmap_memslots() when
destroy VM.

This is consistent with current vfio implementation.
Signed-off-by: Nherongguang <herongguang.he@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'perf-core-for-mingo-4.12-20170327' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New features:

 - Handle inline functions in callchains (Jin Yao)

 - Enable sorting by srcline as key (Milian Wolff)

Fixes:

 - Fix no_size logic in addr_filter__resolve_kernel_syms() in the
   auxtrace code (Adrian Hunter)

 - Fix some thread refcount leaks in 'perf trace' (Arnaldo Carvalho de Melo)

 - Fix divide by zero when calculating percent for an event in a group in
   the annotate by source line code (Taeung Song)

 - build-id files now aren't anymore symlinks, their parent directories
   are, so readlink the later (Taeung Song)

 - Assorted fixes for null termination problems, mostly related to
   readlink, detected by valgrind (Tommi Rantala)

Infrastructure changes:

 - Make vfs_getname probe point logic in 'perf trace' more robust
   wrt length of pathname (Arnaldo Carvalho de Melo)

 - Remove unused 'prefix' parameter from builtins main functions (Arnaldo Carvalho de Melo)

 - Show 'perf list sdt' option in man page (Ravi Bangoria)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

Simplification: it is easier to open /proc/self/exe than /proc/$pid/exe.
Signed-off-by: NTommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-7-tommi.t.rantala@nokia.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Ensure that the string that we read from the data file is null terminated.

Valgrind was complaining:

  ==31357== Invalid read of size 1
  ==31357==    at 0x4EC8C1: __strtok_r_1c (string2.h:200)
  ==31357==    by 0x4EC8C1: parse_ftrace_printk (trace-event-parse.c:161)
  ==31357==    by 0x4F82A8: read_ftrace_printk (trace-event-read.c:204)
  ==31357==    by 0x4F82A8: trace_report (trace-event-read.c:468)
  ==31357==    by 0x4CD552: process_tracing_data (header.c:1576)
  ==31357==    by 0x4D3397: perf_file_section__process (header.c:2705)
  ==31357==    by 0x4D3397: perf_header__process_sections (header.c:2488)
  ==31357==    by 0x4D3397: perf_session__read_header (header.c:2925)
  ==31357==    by 0x4E71E2: perf_session__open (session.c:32)
  ==31357==    by 0x4E71E2: perf_session__new (session.c:139)
  ==31357==    by 0x429F5D: cmd_annotate (builtin-annotate.c:472)
  ==31357==    by 0x497150: run_builtin (perf.c:359)
  ==31357==    by 0x428CE0: handle_internal_command (perf.c:421)
  ==31357==    by 0x428CE0: run_argv (perf.c:467)
  ==31357==    by 0x428CE0: main (perf.c:614)
  ==31357==  Address 0x8ac0efb is 0 bytes after a block of size 1,963 alloc'd
  ==31357==    at 0x4C2DB9D: malloc (vg_replace_malloc.c:299)
  ==31357==    by 0x4F827B: read_ftrace_printk (trace-event-read.c:195)
  ==31357==    by 0x4F827B: trace_report (trace-event-read.c:468)
  ==31357==    by 0x4CD552: process_tracing_data (header.c:1576)
  ==31357==    by 0x4D3397: perf_file_section__process (header.c:2705)
  ==31357==    by 0x4D3397: perf_header__process_sections (header.c:2488)
  ==31357==    by 0x4D3397: perf_session__read_header (header.c:2925)
  ==31357==    by 0x4E71E2: perf_session__open (session.c:32)
  ==31357==    by 0x4E71E2: perf_session__new (session.c:139)
  ==31357==    by 0x429F5D: cmd_annotate (builtin-annotate.c:472)
  ==31357==    by 0x497150: run_builtin (perf.c:359)
  ==31357==    by 0x428CE0: handle_internal_command (perf.c:421)
  ==31357==    by 0x428CE0: run_argv (perf.c:467)
  ==31357==    by 0x428CE0: main (perf.c:614)
Signed-off-by: NTommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-6-tommi.t.rantala@nokia.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Ensure that we have space for the null byte in buf.
Signed-off-by: NTommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-5-tommi.t.rantala@nokia.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Ensure that the string in buf is null terminated.
Signed-off-by: NTommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-4-tommi.t.rantala@nokia.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Valgrind was complaining:

  $ valgrind ./perf list >/dev/null
  ==11643== Memcheck, a memory error detector
  ==11643== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
  ==11643== Using Valgrind-3.12.0 and LibVEX; rerun with -h for copyright info
  ==11643== Command: ./perf list
  ==11643==
  ==11643== Conditional jump or move depends on uninitialised value(s)
  ==11643==    at 0x4C30620: rindex (vg_replace_strmem.c:199)
  ==11643==    by 0x49DAA9: build_id_cache__origname (build-id.c:198)
  ==11643==    by 0x49E1C7: build_id_cache__valid_id (build-id.c:222)
  ==11643==    by 0x49E1C7: build_id_cache__list_all (build-id.c:507)
  ==11643==    by 0x4B9C8F: print_sdt_events (parse-events.c:2067)
  ==11643==    by 0x4BB0B3: print_events (parse-events.c:2313)
  ==11643==    by 0x439501: cmd_list (builtin-list.c:53)
  ==11643==    by 0x497150: run_builtin (perf.c:359)
  ==11643==    by 0x428CE0: handle_internal_command (perf.c:421)
  ==11643==    by 0x428CE0: run_argv (perf.c:467)
  ==11643==    by 0x428CE0: main (perf.c:614)
  [...]

Additionally, a zero length result from readlink() is not very interesting.
Signed-off-by: NTommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-3-tommi.t.rantala@nokia.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Valgrind was complaining:

  ==2633== Syscall param open(filename) points to unaddressable byte(s)
  ==2633==    at 0x5281CC0: __open_nocancel (syscall-template.S:84)
  ==2633==    by 0x537D38: open (fcntl2.h:53)
  ==2633==    by 0x537D38: get_sdt_note_list (symbol-elf.c:2017)
  ==2633==    by 0x5396FD: probe_cache__scan_sdt (probe-file.c:700)
  ==2633==    by 0x49EA2C: build_id_cache__add_sdt_cache (build-id.c:625)
  ==2633==    by 0x49EA2C: build_id_cache__add_s (build-id.c:697)
  ==2633==    by 0x49EE72: build_id_cache__add_b (build-id.c:717)
  ==2633==    by 0x49EE72: dso__cache_build_id (build-id.c:782)
  ==2633==    by 0x49F190: __dsos__cache_build_ids (build-id.c:793)
  ==2633==    by 0x49F190: machine__cache_build_ids (build-id.c:801)
  ==2633==    by 0x49F190: perf_session__cache_build_ids (build-id.c:815)
  ==2633==    by 0x4CD4F2: write_build_id (header.c:165)
  ==2633==    by 0x4D26F7: do_write_feat (header.c:2296)
  ==2633==    by 0x4D26F7: perf_header__adds_write (header.c:2335)
  ==2633==    by 0x4D26F7: perf_session__write_header (header.c:2414)
  ==2633==    by 0x43B324: __cmd_record (builtin-record.c:1154)
  ==2633==    by 0x43B324: cmd_record (builtin-record.c:1839)
  ==2633==    by 0x455A07: __cmd_record (builtin-kmem.c:1868)
  ==2633==    by 0x455A07: cmd_kmem (builtin-kmem.c:1944)
  ==2633==    by 0x497150: run_builtin (perf.c:359)
  ==2633==    by 0x428CE0: handle_internal_command (perf.c:421)
  ==2633==    by 0x428CE0: run_argv (perf.c:467)
  ==2633==    by 0x428CE0: main (perf.c:614)
  ==2633==  Address 0x0 is not stack'd, malloc'd or (recently) free'd
Signed-off-by: NTommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Link: http://lkml.kernel.org/r/20170322130624.21881-2-tommi.t.rantala@nokia.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Pull EDAC updates from Borislav Petkov:
 "A new EDAC driver for the Pondicherry2 memory controller IP found in
  the Intel Apollo Lake platform and the Denverton microserver.

  Plus small fixlets.

  Normally I had this queued for 4.12 but Tony requested for the
  pnd2_edac driver to possibly land in 4.11 therefore I'm sending it to
  you now.

  It is a driver for new hardware which people don't have yet so it
  shouldn't cause any regressions.

  The couple of patches ontop of it show that Qiuxu actually did test it
  on the hardware he has access to :)"

* tag 'edac_for_4.11_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, pnd2_edac: Fix reported DIMM number
  EDAC, pnd2_edac: Fix !EDAC_DEBUG build
  EDAC: Select DEBUG_FS
  EDAC, pnd2_edac: Add new EDAC driver for Intel SoC platforms
  EDAC, i5000, i5400: Fix use of MTR_DRAM_WIDTH macro
  EDAC, xgene: Fix wrongly spelled "procesing"

Currently perf-annotate with --print-line can print
-nan(0x8000000000000) because of division by zero when calculating
percent. The division by zero happens when a sum of samples is zero in
symbol__get_source_line(), so fix it.

For example:

After running 'perf record' like below,

    $ perf record -e "{cycles,page-faults,branch-misses}" ./a.out

Before:

    $ perf annotate --stdio -l

  Sorted summary for file /home/taeung/workspace/a.out
  ----------------------------------------------

   32.89    -nan    7.04 a.c:38
   25.14    -nan    0.00 a.c:34
   16.26    -nan   56.34 a.c:31
   15.88    -nan    1.41 a.c:37
    5.67    -nan    0.00 a.c:39
    1.13    -nan   35.21 a.c:26
    0.95    -nan    0.00 a.c:44
    0.57    -nan    0.00 a.c:32
   Percent                 |      Source code & Disassembly of a.out for cycles (529 samples)
  -----------------------------------------------------------------------------------------
                         :
  ...

   a.c:26    0.57    -nan    4.23 :         40081a:       mov    %edi,-0x24(%rbp)
   a.c:26    0.00    -nan    9.86 :         40081d:       mov    %rsi,-0x30(%rbp)

  ...

However, if a sum of samples is zero (e.g. 'page-faults'),
skip calculating percent.

After:

    $ perf annotate --stdio -l

  Sorted summary for file /home/taeung/workspace/a.out
  ----------------------------------------------

   32.89    0.00    7.04 a.c:38
   25.14    0.00    0.00 a.c:34
   16.26    0.00   56.34 a.c:31
   15.88    0.00    1.41 a.c:37
    5.67    0.00    0.00 a.c:39
    1.13    0.00   35.21 a.c:26
    0.95    0.00    0.00 a.c:44
    0.57    0.00    0.00 a.c:32
   Percent                 |      Source code & Disassembly of old for cycles (529 samples)
  -----------------------------------------------------------------------------------------
                         :
  ...

  a.c:26    0.57    0.00    4.23 :         40081a:       mov    %edi,-0x24(%rbp)
  a.c:26    0.00    0.00    9.86 :         40081d:       mov    %rsi,-0x30(%rbp)

  ...
Signed-off-by: NTaeung Song <treeze.taeung@gmail.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1490598638-13947-3-git-send-email-treeze.taeung@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It is wrong way to read link name from a build-id file.  Because a
build-id file is not anymore a symbolic link but build-id directory of
it is symbolic link, so fix it.

For example, if build-id file name gotten from
dso__build_id_filename() is as below,

  /root/.debug/.build-id/4f/75c7d197c951659d1c1b8b5fd49bcdf8f3f8b1/elf

To correctly read link name of build-id, use the build-id dir path that
is a symbolic link, instead of the above build-id file name like below.

  /root/.debug/.build-id/4f/75c7d197c951659d1c1b8b5fd49bcdf8f3f8b1
Signed-off-by: NTaeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1490598638-13947-2-git-send-email-treeze.taeung@gmail.com
Fixes: 01412261 ("perf buildid-cache: Use path/to/bin/buildid/elf instead of path/to/bin/buildid")
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Pull more pin control fixes from Linus Walleij:
 "Here is a bunch of pin control fixes again

  A bit more than I'd like for this subsystem at this point, but what
  can I do. They are all driver fixes for hardware issues, as like "we
  forgot", "we didn't think of the fact that this could happen", "oops
  that one goes there" etc

   - Kconfig fixup for the TI IOdelay pinctrl-single add-on

   - fix up a typo in the meson i2c ao groups

   - switch a remapping back to use devm_ioremap() as
     devm_ioremap_resource() does not allow for sharing memory regions

   - do not clear the Qualcomm irq status bit in irq_unmask(), as this
     can lead to missing interrupts while the irq handler is executing

   - add irq_request/release_resources() on the ST driver

   - add a bunch of mysteriously missing pingroups for high numbered
     pins in the Qualcomm ipq4019 driver"

* tag 'pinctrl-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: ipq4019: add missing pingroups for pins > 70
  pinctrl: st: add irq_request/release_resources callbacks
  pinctrl: qcom: Don't clear status bit on irq_unmask
  pinctrl: samsung: Fix memory mapping code
  pinctrl: meson-gxbb: Fix typo in i2c ao groups
  pinctrl: ti: The IODelay driver is a DRA7xxx feature so depend on that SoC

Pull m68k updates from Geert Uytterhoeven:

  - build warning fix

  - defconfig updates

  - wire up new statx syscall

* tag 'm68k-for-v4.11-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Wire up statx
  m68k/defconfig: Update defconfigs for v4.11-rc1
  m68k/bitops: Correct signature of test_bit()

Often it is interesting to know how costly a given source line is in
total. Previously, one had to build these sums manually based on all
addresses that pointed to the same source line. This patch introduces
srcline as a sort key, which will do the aggregation for us.

Paired with the recent addition of showing inline frames, this makes
perf report much more useful for many C++ work loads.

The following shows the new feature in action. First, let's show the
status quo output when we sort by address. The result contains many hist
entries that generate the same output:

  ~~~~~~~~~~~~~~~~
  $ perf report --stdio --inline -g address
  # Children      Self  Command       Shared Object        Symbol
  # ........  ........  ............  ...................  .........................................
  #
      99.89%    35.34%  cpp-inlining  cpp-inlining         [.] main
            |
            |--64.55%--main complex:655
            |          /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
            |          /usr/include/c++/6.3.1/complex:664 (inline)
            |          |
            |          |--60.31%--hypot +20
            |          |          |
            |          |          |--8.52%--__hypot_finite +273
            |          |          |
            |          |          |--7.32%--__hypot_finite +411
...
             --35.34%--_start +4194346
                       __libc_start_main +241
                       |
                       |--6.65%--main random.tcc:3326
                       |          /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:185 (inline)
                       |
                       |--2.70%--main random.tcc:3326
                       |          /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:185 (inline)
                       |
                       |--1.69%--main random.tcc:3326
                       |          /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:185 (inline)
  ...
  ~~~~~~~~~~~~~~~~

With this patch and `-g srcline` we instead get the following output:

  ~~~~~~~~~~~~~~~~
  $ perf report --stdio --inline -g srcline
  # Children      Self  Command       Shared Object        Symbol
  # ........  ........  ............  ...................  .........................................
  #
      99.89%    35.34%  cpp-inlining  cpp-inlining         [.] main
            |
            |--64.55%--main complex:655
            |          /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
            |          /usr/include/c++/6.3.1/complex:664 (inline)
            |          |
            |          |--64.02%--hypot
            |          |          |
            |          |           --59.81%--__hypot_finite
            |          |
            |           --0.53%--cabs
            |
             --35.34%--_start
                       __libc_start_main
                       |
                       |--12.48%--main random.tcc:3326
                       |          /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:185 (inline)
  ...
  ~~~~~~~~~~~~~~~~
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170318214928.9047-1-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If the address belongs to an inlined function, the source information
back to the first non-inlined function will be printed.

For example:

1. Show inlined function name
   perf report -g function --inline

-    0.69%     0.00%  inline   ld-2.23.so           [.] dl_main
   - dl_main
        0.56% _dl_relocate_object
         _dl_relocate_object (inline)
         elf_dynamic_do_Rela (inline)

2. Show the file/line information
   perf report -g address --inline

-    0.69%     0.00%  inline   ld-2.23.so           [.] _dl_start
     _dl_start rtld.c:307
      /build/glibc-GKVZIf/glibc-2.23/elf/rtld.c:413 (inline)
   + _dl_sysdep_start dl-sysdep.c:250
Signed-off-by: NYao Jin <yao.jin@linux.intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NMilian Wolff <milian.wolff@kdab.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1490474069-15823-6-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If the address belongs to an inlined function, the source information
back to the first non-inlined function will be printed.

For example:

1. Show inlined function name
   perf report --stdio -g function --inline

     0.69%     0.00%  inline   ld-2.23.so           [.] dl_main
            |
            ---dl_main
               |
                --0.56%--_dl_relocate_object
                          _dl_relocate_object (inline)
                          elf_dynamic_do_Rela (inline)

2. Show the file/line information
   perf report --stdio -g address --inline

     0.69%     0.00%  inline   ld-2.23.so           [.] _dl_start_user
            |
            ---_dl_start_user .:0
               _dl_start rtld.c:307
               /build/glibc-GKVZIf/glibc-2.23/elf/rtld.c:413 (inline)
               _dl_sysdep_start dl-sysdep.c:250
               |
                --0.56%--dl_main rtld.c:2076

Committer tests:

  # perf record --call-graph dwarf ~/bin/perf stat usleep 1

 Performance counter stats for 'usleep 1':

          0.443020      task-clock (msec)         #    0.449 CPUs utilized
                 1      context-switches          #    0.002 M/sec
                 0      cpu-migrations            #    0.000 K/sec
                52      page-faults               #    0.117 M/sec
         1,049,423      cycles                    #    2.369 GHz
           801,456      instructions              #    0.76  insn per cycle
           155,609      branches                  #  351.246 M/sec
             7,026      branch-misses             #    4.52% of all branches

       0.000987570 seconds time elapsed

  [ perf record: Woken up 2 times to write data ]
  [ perf record: Captured and wrote 0.553 MB perf.data (66 samples) ]
  # perf report --stdio --inline fs__get_mountpoint
  <SNIP>
     1.73%     0.00%  perf     perf           [.] fs__get_mountpoint
            |
            ---fs__get_mountpoint
               fs__get_mountpoint (inline)
               fs__check_mounts (inline)
               __statfs
               entry_SYSCALL_64
               sys_statfs
               SYSC_statfs
               user_statfs
               user_path_at_empty
               filename_lookup
               path_lookupat
               link_path_walk
               inode_permission
               __inode_permission
               kernfs_iop_permission
               kernfs_refresh_inode
               security_inode_notifysecctx
               selinux_inode_notifysecctx
               selinux_inode_setsecurity
               security_context_to_sid
               security_context_to_sid_core
               string_to_context_struct
               symcmp
Signed-off-by: NYao Jin <yao.jin@linux.intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NMilian Wolff <milian.wolff@kdab.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1490474069-15823-5-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It takes some time to look for inline stack for callgraph addresses.  So
it provides new option "--inline" to let user decide if enable this
feature.

  --inline:

  If a callgraph address belongs to an inlined function, the inline stack
  will be printed. Each entry is the inline function name or file/line.
Signed-off-by: NYao Jin <yao.jin@linux.intel.com>
Tested-by: NMilian Wolff <milian.wolff@kdab.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1490474069-15823-4-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It would be useful for perf to support a mode to query the inline stack
for a given callgraph address. This would simplify finding the right
code in code that does a lot of inlining.

The srcline.c has contained the code which supports to translate the
address to filename:line_nr. This patch just extends the function to let
it support getting the inline stacks.

It introduces the inline_list which will store the inline function
result (filename:line_nr and funcname).

If BFD lib is not supported, the result is only filename:line_nr.
Signed-off-by: NYao Jin <yao.jin@linux.intel.com>
Tested-by: NMilian Wolff <milian.wolff@kdab.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1490474069-15823-3-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Introduce dso__name() and filename_split() out of existing code because
these codes will be used in several places in next patch.

For filename_split(), it may also solve a potential memory leak in
existing code. In existing addr2line(),

        sep = strchr(filename, ':');
        if (sep) {
                *sep++ = '\0';
                *file = filename;
                *line_nr = strtoul(sep, NULL, 0);
                ret = 1;
        }

out:
        pclose(fp);
        return ret;

If sep is NULL, filename is not freed or returned via file.
Signed-off-by: NYao Jin <yao.jin@linux.intel.com>
Tested-by: NMilian Wolff <milian.wolff@kdab.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1490474069-15823-2-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We got it from the git sources but never used it for anything, with the
place where this would be somehow used remaining:

  static int run_builtin(struct cmd_struct *p, int argc, const char **argv)
  {
	prefix = NULL;
	if (p->option & RUN_SETUP)
		prefix = NULL; /* setup_perf_directory(); */

Ditch it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uw5swz05vol0qpr32c5lpvus@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Commit 40218dae ("perf list: Show SDT and pre-cached events") added
sdt support in perf list, but it missed to update documentation.

Show sdt option in man perf-list.
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170327025538.1753-1-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Address filtering with kernel symbols incorrectly resulted in the error
"Cannot determine size of symbol" because the no_size logic was the wrong
way around.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Tested-by: NAndi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org # v4.9+
Link: http://lkml.kernel.org/r/1490357752-27942-1-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Pull char/misc driver fixes from Greg KH:
 "A smattering of different small fixes for some random driver
  subsystems. Nothing all that major, just resolutions for reported
  issues and bugs.

  All have been in linux-next with no reported issues"

* tag 'char-misc-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  extcon: int3496: Set the id pin to direction-input if necessary
  extcon: int3496: Use gpiod_get instead of gpiod_get_index
  extcon: int3496: Add dependency on X86 as it's Intel specific
  extcon: int3496: Add GPIO ACPI mapping table
  extcon: int3496: Rename GPIO pins in accordance with binding
  vmw_vmci: handle the return value from pci_alloc_irq_vectors correctly
  ppdev: fix registering same device name
  parport: fix attempt to write duplicate procfiles
  auxdisplay: img-ascii-lcd: add missing sentinel entry in img_ascii_lcd_matches
  Drivers: hv: vmbus: Don't leak memory when a channel is rescinded
  Drivers: hv: vmbus: Don't leak channel ids
  Drivers: hv: util: don't forget to init host_ts.lock
  Drivers: hv: util: move waiting for release to hv_utils_transport itself
  vmbus: remove hv_event_tasklet_disable/enable
  vmbus: use rcu for per-cpu channel list
  mei: don't wait for os version message reply
  mei: fix deadlock on mei reset
  intel_th: pci: Add Gemini Lake support
  intel_th: pci: Add Denverton SOC support
  intel_th: Don't leak module refcount on failure to activate
  ...