The recent change to never ignore the bitmap, revealed that the bitmap isn't
begin flushed properly when an array is stopped.

We call bitmap_daemon_work three times as there is a three-stage pipeline for
flushing updates to the bitmap file.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Firstly, R1BIO_Degraded was being set in a number of places in the resync
code, but is never used there, so get rid of those settings.

Then: When doing a resync, we want to clear the bit in the bitmap iff the
array will be non-degraded when the sync has completed.  However the current
code would clear the bitmap if the array was non-degraded when the resync
*started*, which obviously isn't right (it is for 'resync' but not for
'recovery' - i.e.  rebuilding a failed drive).

This patch calculated 'still_degraded' and uses the to tell bitmap_start_sync
whether this sync should clear the corresponding bit.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The code currently will ignore the bitmap if the array seem to be in-sync.
This is wrong if the array is degraded, and probably wrong anyway.  If the
bitmap says some chunks are not in in-sync, and the superblock says everything
IS in sync, then something is clearly wrong, and it is safer to trust the
bitmap.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Until the bitmap code was added,

   modprobe md

would load the md module.  But now the md module is called 'md-mod', so we
really need an alias for backwards comparability.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

no_overlay bttv parameter implemented to fix OOPS on some PCI chipsets
(like some VIA) with these behaviors:

1) If pci_quicks does identify the chip as having troubles to
   handle PCI2PCI transfers, no_overlay defaults to 1. The user may force
   it to 0, to reenable (not recommended).

2) For newer chipsets not blacklisted, no_overlay=1 is provided as a
   workaround until PCI chipset included on /drivers/pci/quirks.c

Thanks to Bodo Eggert <7eggert@gmx.de>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

CONFIG_KEXEC breaks UP builds because of a misspelled smp_release_cpus().
Also, the function isn't defined unless built with CONFIG_SMP but it is
needed if we are to go from a UP to SMP kernel.  Enable it and document it.

Thanks to Steven Winiecki for reporting this and to Milton for remembering
how it's supposed to work and why.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch fixes oops caused by ide interfaces not on pci.  pcibus_to_node
causes the kernel to crash otherwise.  Patch also adds a BUG_ON to check if
hwif is NULL.
Signed-off-by: NChristoph Lameter <christoph@lameter.com>
Signed-off-by: NShai Fultheim <shai@scalex86.org>
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix up arm26, cris, frv, m68k, parisc and sh64 too..

x86_64 had hardcoded the VM_ numbers so it broke down when the numbers
were changed.
Signed-off-by: NAlexander Nyberg <alexn@telia.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes five bugs in the key management syscall interface:

 (1) add_key() returns 0 rather than EINVAL if the key type is "".

     Checking the key type isn't "" should be left to lookup_user_key().

 (2) request_key() returns ENOKEY rather than EPERM if the key type begins
     with a ".".

     lookup_user_key() can't do this because internal key types begin with a
     ".".

 (3) Key revocation always returns 0, even if it fails.

 (4) Key read can return EAGAIN rather than EACCES under some circumstances.

     A key is permitted to by read by a process if it doesn't grant read
     access, but it does grant search access and it is in the process's
     keyrings. That search returns EAGAIN if it fails, and this needs
     translating to EACCES.

 (5) request_key() never adds the new key to the destination keyring if one is
     supplied.

     The wrong macro was being used to test for an error condition: PTR_ERR()
     will always return true, whether or not there's an error; this should've
     been IS_ERR().
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-Off-By: NLinus Torvalds <torvalds@osdl.org>

This removes the calls to device_suspend() from the shutdown path that
were added sometime during 2.6.13-rc*.  They aren't working properly on
a number of configs (I got reports from both ppc powerbook users and x86
users) causing the system to not shutdown anymore.

I think it isn't the right approach at the moment anyway.  We have
already a shutdown() callback for the drivers that actually care about
shutdown and the suspend() code isn't yet in a good enough shape to be
so much generalized.  Also, the semantics of suspend and shutdown are
slightly different on a number of setups and the way this was patched in
provides little way for drivers to cleanly differenciate.  It should
have been at least a different message.

For 2.6.13, I think we should revert to 2.6.12 behaviour and have a
working suspend back.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The ARM fault handler is optimised to make the fast path, err, fast.
The renumbering of the VM_FAULT_* codes broke this because numbers
were used instead of the definitions.  Fix this.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

ACPI now uses kmalloc(...,GPF_ATOMIC) during suspend/resume.

http://bugzilla.kernel.org/show_bug.cgi?id=3469Signed-off-by: NDavid Shaohua Li <shaohua.li@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

http://bugzilla.kernel.org/show_bug.cgi?id=4923Signed-off-by: NLen Brown <len.brown@intel.com>

For 2.6.12 behaviour, this (EXPERIMENTAL) driver
should not be built.

Update the driver source with latest from Luming.
Signed-off-by: NLuming Yu <luming.yu@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by Len Brown <len.brown@intel.com>

Burst mode isn't ready for prime time,
but can be enabled for test via "ec_burst=1"
Signed-off-by: NLuming Yu <luming.yu@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Patch from Ian Campbell

On PXA255 there is no way to disable the watchdog. Turning off OIER[E3]
as suggested in the existing comment does not work.

I posted a note to the ARM mailing list a little while ago asking for
opinions from people using SA1100. There was one reponse from Nico who
believes that the SA1100 is the same as the PXA255 in this respect.

You also asked me to involve the watchdog maintainer which I tried to
do but didn't hear anything back. There are only a couple of other
drivers which can't stop the watchdog and there seems to be no
consistancy regarding printing an error etc. I decided to print
something since that matches the case for all the other drivers when
NOWAYOUT is turned on.

Also, I changed the device .name to "watchdog" like most of the other
watchdogs. udev uses it as the device name (by default) and spaces etc.
get in the way.

Superceded 2833/1 because 2.6.13-rc4 caused rejects.
Signed-off-by: NIan Campbell <icampbell@arcom.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Deepak Saxena

This allows the serial driver autconf to work properly on all the IXP
serial ports. W/o it we basically put the serial port in an unrecoverable
state and lose console.
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

The IEEE 754 standard specifies that the result of (x - x), where x is
a valid number, should be -0 if the rounding mode is towards minus
infinity or +0 otherwise.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Michael Burian

This file is maintained by RMK's machine registry, it should not be patched.
Signed-off-by: NMichael Burian <dynmail1@gassner-waagen.at>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Deepak Saxena

The XScale locking code is not something that has been validated
on 2.6 and needs to be replaced with a more generic API to use
with other ARMs that support locking features.
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Richard Purdie

NWFPE used global variables which meant it wasn't safe for use with
preemptive kernels. This patch removes them and communicates the
information between functions in a preempt safe manner. Generation
of some exceptions was broken and this has also been corrected.
Tests with glibc's maths test suite show no change in the results
before/after this patch.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

The default clock rate does not specify a maximum, so the
default of 400KHz is used. This rate is too fast for the PMU
on the EB2410ITX, so we now specify platform data with a rate
of around 100KHz.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The VM_FAULT_WRITE thing is an extra bit, not a valid return value, and
has to be treated as such by get_user_pages().
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Checking pte_dirty instead of pte_write in __follow_page is problematic
for s390, and for copy_one_pte which leaves dirty when clearing write.

So revert __follow_page to check pte_write as before, and make
do_wp_page pass back a special extra VM_FAULT_WRITE bit to say it has
done its full job: once get_user_pages receives this value, it no longer
requires pte_write in __follow_page.

But most callers of handle_mm_fault, in the various architectures, have
switch statements which do not expect this new case.  To avoid changing
them all in a hurry, make an inline wrapper function (using the old
name) that masks off the new bit, and use the extended interface with
double underscores.

Yes, we do have a call to do_wp_page from do_swap_page, but no need to
change that: in rare case it's needed, another do_wp_page will follow.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
[ Cleanups by Nick Piggin ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch disables the PCI Interrupt Link refernece counts,
which should not co-exist with the 2.6.12 irq_router.resume
method or else a double acpi_pci_link_set() could result
on resume.
Signed-off-by: NDavid Shaohua Li <shaohua.li@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

For soft reset during system hang, got an error "CPU did not take
control" for some CPUs even though they responded to soft-reset (called
SystemReset, die and called debugger - xmon).   First these CPUs entered
into xmon by IPI callback and then got a soft-reset exception and
re-entered into xmon again. The first CPU which re-entered into xmon got
the output lock and made into xmon successfully without unlocking.
Hence, the next CPU(s) which re-entered into xmon try to acquire a lock
(get_output_lock). Therefore, we can not view state of those CPU(s).

[This is a simple, very low risk, obvious fix for an obvious bug, and
should go into 2.6.13.  -- paulus]
Signed-off-by: NHaren Myneni <hbabu@us.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NLen Brown <len.brown@intel.com>

We have increased PCIBIOS_MIN_IO to 0x4000, but still want
motherboard resources to be allocated properly. So we need
to state 0x1000 (according to the comment) limit explicitely.
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is a number of x86 laptops that have some non-PCI IO ports
in the 0x1000-0x1fff range, and it's quite hard to control the correct
order of resource allocation between PCI and other subsystems controlling
these ports. Especially with modular kernel.

So just increase PCIBIOS_MIN_IO to 0x4000 to prevent any new PCI
resource allocations in the problematic range (this limitation must
apply _only_ to the root bus resources - see Linus' change in
pci_bus_alloc_resource).  As PCIBIOS_MIN_IO and PCIBIOS_MIN_CARDBUS_IO
are the same now on i386 and x86-64, we can remove the latter.
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>