Fix SO_PEERSEC for tcp sockets to return the security context of
the peer (as represented by the SA from the peer) as opposed to the
SA used by the local/source socket.
Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Since the upstreaming of the mlsxfrm modification a few months back,
testing has resulted in the identification of the following issues/bugs that
are resolved in this patch set.

1. Fix the security context used in the IKE negotiation to be the context
   of the socket as opposed to the context of the SPD rule.

2. Fix SO_PEERSEC for tcp sockets to return the security context of
   the peer as opposed to the source.

3. Fix the selection of an SA for an outgoing packet to be at the same
   context as the originating socket/flow.

The following would be the result of applying this patchset:

- SO_PEERSEC will now correctly return the peer's context.

- IKE deamons will receive the context of the source socket/flow
  as opposed to the SPD rule's context so that the negotiated SA
  will be at the same context as the source socket/flow.

- The SELinux policy will require one or more of the
  following for a socket to be able to communicate with/without SAs:

  1. To enable a socket to communicate without using labeled-IPSec SAs:

     allow socket_t unlabeled_t:association { sendto recvfrom }

  2. To enable a socket to communicate with labeled-IPSec SAs:

     allow socket_t self:association { sendto };
     allow socket_t peer_sa_t:association { recvfrom };

This Patch: Pass correct security context to IKE for use in negotiation

Fix the security context passed to IKE for use in negotiation to be the
context of the socket as opposed to the context of the SPD rule so that
the SA carries the label of the originating socket/flow.
Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

<= and => don't work well on net-endian...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Weirdness: the third argument of socket() is net-endian
here.  Oh, well - it's documented in packet(7).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MAX_HEADER does not include the ipv6 header length in it,
so we need to add it in explicitly.

With help from YOSHIFUJI Hideaki.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (118 commits)
  [netdrvr] skge: build fix
  [PATCH] NetXen: driver cleanup, removed unnecessary __iomem type casts
  [PATCH] PHY: Add support for configuring the PHY connection interface
  [PATCH] chelesio: transmit locking (plus bug fix).
  [PATCH] chelsio: statistics improvement
  [PATCH] chelsio: add MSI support
  [PATCH] chelsio: use standard CRC routines
  [PATCH] chelsio: cleanup pm3393 code
  [PATCH] chelsio: add 1G swcixw aupport
  [PATCH] chelsio: add support for other 10G boards
  [PATCH] chelsio: remove unused mutex
  [PATCH] chelsio: use kzalloc
  [PATCH] chelsio: whitespace fixes
  [PATCH] amd8111e use standard CRC lib
  [PATCH] sky2: msi enhancements.
  [PATCH] sky2: kfree_skb_any needed
  [PATCH] sky2: fixes for Yukon EC_U chip revisions
  [PATCH] sky2: add Dlink 560SX id
  [PATCH] sky2: receive error handling fix
  [PATCH] skge: don't clear MC state on link down
  ...

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: correct request error handling
  mmc: Flush block queue when removing card
  mmc: sdhci high speed support
  mmc: Support for high speed SD cards
  mmc: Fix mmc_delay() function
  mmc: Add support for mmc v4 wide-bus modes
  [PATCH] mmc: Add support for mmc v4 high speed mode
  trivial change for mmc/Kconfig: MMC_PXA does not mean only PXA255
  Make general code cleanups
  Add MMC_CAP_{MULTIWRITE,BYTEBLOCK} flags
  Platform device error handling cleanup
  Move register definitions away from the header file
  Change OMAP_MMC_{READ,WRITE} macros to use the host pointer
  Replace base with virt_base and phys_base
  mmc: constify mmc_host_ops vectors
  mmc: remove kernel_thread()

* 'release' of master.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  Revert "ACPI: SCI interrupt source override"

Signed-off-by: NJeff Garzik <jeff@garzik.org>

This reverts commit 281ea49b,
which broke ACPI Interrupt source overrides that move
the SCI from one IRQ in PIC mode to another in IOAPIC mode.

If the SCI shared an interrupt line with another device,
this would result in a "irq 18: nobody cared" type failure.

http://bugzilla.kernel.org/show_bug.cgi?id=7601Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NAmit S. Kale <amitkale@netxen.com>

 netxen_nic.h         |   38 ++++++++------------------------------
 netxen_nic_ethtool.c |    5 ++---
 netxen_nic_hw.c      |   12 +++++-------
 netxen_nic_main.c    |    8 +++-----
 4 files changed, 18 insertions(+), 45 deletions(-)
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Most PHYs connect to an ethernet controller over a GMII or MII
interface.  However, a growing number are connected over
different interfaces, such as RGMII or SGMII.

The ethernet driver will tell the PHY what type of connection it
is by setting it manually, or passing it in through phy_connect
(or phy_attach).

Changes include:
* Updates to documentation
* Updates to PHY Lib consumers
* Changes to PHY Lib to add interface support
* Some minor changes to whitespace in phy.h
* gianfar driver now detects interface and passes appropriate
  value to PHY Lib
Signed-off-by: NAndrew Fleming <afleming@freescale.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

If transmit lock is contended on, then push return code back
and retry at higher level.

Bugfix: If buffer is reallocated because of lack of headroom
and the send is blocked, then drop packet. This is necessary
because caller would end up requeuing a freed skb.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Cleanup statistics management:
 * Get rid of duplicate or unused statistics
 * Convert high volume stats to per-cpu and 64 bit
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Using MSI can avoid sharing IRQ and associated overhead.
Tested on PCI-X.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Replace driver crc calculation with existing library.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Replace macro with function for updating RMON values

Cleanups:
	* remove unused enum's
	* Fix comment format
Signed-off-by: NStephen HEmminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add support for 1G versions of Chelsio devices.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>