IOMMUs merges scatter/gather segments without considering a low level
driver's restrictions. The problem is that IOMMUs can't access to the
limitations because they are in request_queue.

This patchset introduces a new structure, device_dma_parameters,
including dma information. A pointer to device_dma_parameters is added
to struct device. The bus specific structures (like pci_dev) includes
device_dma_parameters. Low level drivers can use dma_set_max_seg_size
to tell IOMMUs about the restrictions.

We can move more dma stuff in struct device (like dma_mask) to struct
device_dma_parameters later (needs some cleanups before that).

This includes patches for all the IOMMUs that could merge sg (x86_64,
ppc, IA64, alpha, sparc64, and parisc) though only the ppc patch was
tested. The patches for other IOMMUs are only compile tested.

This patch:

Add a new structure, device_dma_parameters, including dma information.  A
pointer to device_dma_parameters is added to struct device.

- there are only max_segment_size and segment_boundary_mask there but we'll
  move more dma stuff in struct device (like dma_mask) to struct
  device_dma_parameters later.  segment_boundary_mask is not supported yet.

- new accessors for the dma parameters are added.  So we can easily change
  where to place struct device_dma_parameters in the future.

- dma_get_max_seg_size returns 64K if dma_parms in struct device isn't set
  up properly.  64K is the default max_segment_size in the block layer.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NJeff Garzik <jeff@garzik.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the declaration of device_pm_schedule_removal() to device.h
and make it exported, as it will be used directly by some drivers
for unregistering device objects during suspend/resume cycles in a
safe way.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The driver core, and some other parts of the kernel just want to find a
device based on a name for a specific bus.  Give them a simple wrapper
to prevent them from having to always roll their own.

This will be used in the PPC patch later in this series.

Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Finally clean up the odd spaces and other mess in device.h
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add the following class iteration functions for driver use:
	class_for_each_device
	class_find_device
	class_for_each_child
	class_find_child
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch removes the kobject, and a few other driver-core-only fields
out of struct driver and into the driver core only.  Now drivers can be
safely create on the stack or statically (like they currently are.)

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The iseries driver wants to hang kobjects off of its driver, so, to
preserve backwards compatibility, we need to add a call to the driver
core to allow future changes to work properly.

Hopefully no one uses this function in the future and the iseries_veth
driver authors come to their senses so I can remove this hack...

Cc: Dave Larson <larson1@us.ibm.com>
Cc: Santiago Leon <santil@us.ibm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is lot like default attributes for devices (and indeed,
a lot of the code is lifted from there).
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

struct bus_type is static everywhere in the kernel.  This moves the
kobject in the structure out of it, and a bunch of other private only to
the driver core fields are now moved to a private structure.  This lets
us dynamically create the backing kobject properly and gives us the
chance to be able to document to users exactly how to use the struct
bus_type as there are no fields they can improperly access.

Thanks to Kay for the build fixes on this patch.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This allows an easier way to get to the device klist associated with a
struct bus_type (you have three to choose from...)  This will make it
easier to move these fields to be dynamic in a future patch.

The only user of this is the PCI core which horribly abuses this
interface to rearrange the order of the pci devices.  This should be
done using the existing bus device walking functions, but that's left
for future patches.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This allows an easier way to get to the kset associated with a struct
bus_type (you have three to choose from...)  This will make it easier to
move these fields to be dynamic in a future patch.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This isn't used by anything in the driver core, and by no one in the 204
different usages of it in the kernel tree.  Remove this field so no one
gets any idea that it is needed to be used.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

These functions are no longer called or needed, so we can remove them.

As I rewrote the whole firmware.c file, add my copyright.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Dynamically create the kset instead of declaring it statically.

Having 3 static kobjects in one structure is not only foolish, but ripe
for nasty race conditions if handled improperly.  We also rename the
field to catch any potential users of it (not that there should be
outside of the driver core...)

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Dynamically create the kset instead of declaring it statically.

Having 3 static kobjects in one structure is not only foolish, but ripe
for nasty race conditions if handled improperly.  We also rename the
field to catch any potential users of it (not that there should be
outside of the driver core...)

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Removed duplicates defined elsewhere
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch reorganizes the way suspend and resume notifications are
sent to drivers.  The major changes are that now the PM core acquires
every device semaphore before calling the methods, and calls to
device_add() during suspends will fail, while calls to device_del()
during suspends will block.

It also provides a way to safely remove a suspended device with the
help of the PM core, by using the device_pm_schedule_removal() callback
introduced specifically for this purpose, and updates two drivers (msr
and cpuid) that need to use it.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts commit fcd239d3.

I messed up, ia64 still uses these files in the current tree, and now
can not build the pci code, which all ia64 boxes seem to require :)

This fixes that mistake.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

These functions are not used by anyone, so remove them from the tree.

The class_device code will be removed soon anyway, so no future users
will ever be possible.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This changes the uevent buffer functions to use a struct instead of a
long list of parameters. It does no longer require the caller to do the
proper buffer termination and size accounting, which is currently wrong
in some places. It fixes a known bug where parts of the uevent
environment are overwritten because of wrong index calculations.

Many thanks to Mathieu Desnoyers for finding bugs and improving the
error handling.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Attributes do not have an owner(module) anymore, so there is no need
to carry the attributes in every single bus instance.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Acked-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Commit bd804eba ("PM: Introduce
pm_power_off_prepare") caused problems in the poweroff path, as reported by
YOSHIFUJI Hideaki / 吉藤英明.

Generally, sysdev_shutdown() should be called after the ACPI preparation for
powering the system off.  To make it happen, we can separate sysdev_shutdown()
from device_shutdown() and call it directly wherever necessary.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Tested-by: NYOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This defines a dev_vdbg() call, which is enabled with -DVERBOSE_DEBUG.
When enabled, dev_vdbg() acts just like dev_dbg().  When disabled, it is a
NOP ...  just like dev_dbg() without -DDEBUG.  The specific code was moved
out of a USB patch, but lots of drivers have similar support.

That is, code can now be written to use an additional level of debug
output, selected at compile time.  Many driver authors have found this
idiom to be very useful.  A typical usage model is for "normal" debug
messages to focus on fault paths and not be very "chatty", so that those
messages can be left on during normal operation without much of a
performance or syslog load.  On the other hand "verbose" messages would be
noisy enough that they wouldn't normally be enabled; they might even affect
timings enough to change system or driver behavior.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

devt_attr and uevent_attr are either allocated dynamically with or
embedded in device and class_device as they needed their owner field
set to the module implementing the driver.  Now that sysfs implements
immediate disconnect and owner field removed from struct attribute,
there is no reason to do this.  Remove these attributes from
[class_]device and use static attribute structures instead.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We've had various reports of some legacy "probe the hardware" style
platform drivers having nasty problems with hotplug support.

The core issue is that those legacy drivers don't fully conform to the
driver model.  They assume a role that should be the responsibility of
infrastructure code: creating device nodes.

The "modprobe" step in hotplugging relies on drivers to have split those
roles into different modules.  The lack of this split causes the problems.
When a driver creates nodes for devices that don't exist (sending a hotplug
event), then exits (aborting one modprobe) before the "modprobe $MODALIAS"
step completes (by failing, since it's in the middle of a modprobe), the
result can be an endless loop of modprobe invocations ...  badness.

This fix uses the newish per-device flag controlling issuance of "add"
events.  (A previous version of this patch used a per-device "driver can
hotplug" flag, which only scrubbed $MODALIAS from the environment rather
than suppressing the entire hotplug event.) It also shrinks that flag to
one bit, saving a word in "struct device".

So the net of this patch is removing some nasty failures with legacy
drivers, while retaining hotplug capability for the majority of platform
drivers.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <gregkh@suse.de>
Cc: Andres Salomon <dilinger@debian.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch removes the PCI_MULTITHREAD_PROBE option that had already 
been marked as broken.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We need to work on cleaning up the relationship between kobjects, ksets and
ktypes.  The removal of 'struct subsystem' is the first step of this,
especially as it is not really needed at all.

Thanks to Kay for fixing the bugs in this patch.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Duplicate what Zach Brown did for pr_debug in commit
8b2a1fd1

[akpm@linux-foundation.org: fix a couple of things which broke]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as896b) fixes an oversight in the design of
device_schedule_callback().  It is necessary to acquire a reference to the
module owning the callback routine, to prevent the module from being
unloaded before the callback can run.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Satyam Sharma <satyam.sharma@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Driver core: add suspend() and resume() to struct device_type

In cases when there are devices of different types in the same class
we can't use class's implementation of suspend and resume methods and
we need to add them to struct device_type instead.

Also fix error handling in resume code (we should not try to call
class's resume method iof bus's resume method for the device failed.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The completion in the driver release path is due to ancient history in
the _very_ early 2.5 days when we were not tracking the module reference
count of attributes.  It is not needed at all and can be removed.

Note, we now have an empty release function for the driver structure.
This is due to the fact that drivers are statically allocated in the
system at this point in time, something which I want to change in the
future.  But remember, drivers are really code, which is reference
counted by the module, unlike devices, which are data and _must_ be
reference counted properly in order to work correctly.


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make multithreaded probing work per subsystem instead of per driver.

It doesn't make much sense to probe the same device for multiple drivers in
parallel (after all, only one driver can bind to the device).  Instead, create
a probing thread for each device that probes the drivers one after another. 
Also make the decision to use multi-threaded probe per bus instead of per
device and adapt the pci code.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If "name" of a device_type is specified, the uevent will
contain the device_type name in the DEVTYPE variable.
This helps userspace to distingiush between different types
of devices, belonging to the same subsystem.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Driver core: use attribute groups in struct device_type

Attribute groups are more flexible than attribute lists
(an attribute list can be represented by anonymous group)
so switch struct device_type to use them.

Also rework attribute creation for devices so that they all
cleaned up properly in case of errors.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Cc: Kay Sievers <kay.sievers@novell.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We get two per-bus sysfs files:
  ls-l /sys/subsystem/usb
  drwxr-xr-x 2 root root    0 2007-02-16 16:42 devices
  drwxr-xr-x 7 root root    0 2007-02-16 14:55 drivers
  -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe
  --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe

The flag "drivers_autoprobe" controls the behavior of the bus to bind
devices by default, or just initialize the device and leave it alone.

The command "drivers_probe" accepts a bus_id and the bus tries to bind a
driver to this device.

Systems who want to control the driver binding with udev, switch off the
bus initiated probing:
  echo 0 > /sys/subsystem/usb/drivers_autoprobe
  echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe
  ...

and initiate the probing with udev rules like:
  ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel"
  ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel"
  ...

Custom driver binding can happen in earlier rules by something like:
  ACTION=="add", SUBSYSTEM=="usb", \
  ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \
  ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel"

This is intended to solve the modprobe.conf mess with "install-rules", custom
bind/unbind-scripts and all the weird things people invented over the years.
It should also provide the functionality "libusual" was supposed to do.

With udev, one can just write a udev rule to drive all USB-disks at the
third port of USB-hub by the "ub" driver, and everything else by
usb-storage. One can also instruct udev to bind different wireless
drivers to identical cards - just selected by the pcmcia slot-number, and
whatever ...

To use the mentioned rules, it needs udev version 106, to be able to
write ATTR{}="$kernel" to sysfs files.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

  - uses a kset in "struct class" to keep track of all directories
    belonging to this class
  - merges with the /sys/devices/virtual logic.
  - removes the namespace-dir if the last member of that class
    leaves the directory.

There may be locking or refcounting fixes left, I stopped when it seemed
to work with network and sound modules. :)

From: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

built-in drivers had broken sysfs links that caused bootup hangs for
certain driver unregistry sequences.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch (as868) adds a helper routine for device drivers that need
to set up a callback to perform some action in a different process's
context.  This is intended for use by attribute methods that want to
unregister themselves or their parent device.  Attribute method calls
are mutually exclusive with unregistration, so such actions cannot be
taken directly.

Two attribute methods are converted to use the new helper routine: one
for SCSI device deletion and one for System/390 ccwgroup devices.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Oliver Neukum <oneukum@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No one uses it, and it wasn't exported to modules, so remove it.  The
only other user of it was the network code, which is now converted to
use struct device instead.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Globally, s/driverfs/sysfs/g.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>