- 22 4月, 2017 1 次提交
-
-
由 Matthew Whitehead 提交于
Constants used for tuning are generally a bad idea, especially as hardware changes over time. Replace the constant 2 jiffies with sysctl variable netdev_budget_usecs to enable sysadmins to tune the softirq processing. Also document the variable. For example, a very fast machine might tune this to 1000 microseconds, while my regression testing 486DX-25 needs it to be 4000 microseconds on a nearly idle network to prevent time_squeeze from being incremented. Version 2: changed jiffies to microseconds for predictable units. Signed-off-by: NMatthew Whitehead <tedheadster@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 4月, 2017 1 次提交
-
-
由 Jiri Pirko 提交于
To find out if a netdev is an OVS port. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 4月, 2017 1 次提交
-
-
由 Florian Westphal 提交于
commit 83e7e4ce ("mac80211: Use rhltable instead of rhashtable") removed the last user that made use of 'insecure_elasticity' parameter, i.e. the default of 16 is used everywhere. Replace it with a constant. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 4月, 2017 2 次提交
-
-
由 Chopra, Manish 提交于
This patch adds necessary APIs to interface with qede aRFS support in successive patch. It also reserves separate PTT entry for aRFS, [as being in fastpath flow] for hardware access instead of trying to acquire it at run time from the ptt pool. Signed-off-by: NManish Chopra <manish.chopra@cavium.com> Signed-off-by: NYuval Mintz <yuval.mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 R. Parameswaran 提交于
The MTU overhead calculation in L2TP device set-up merged via commit b784e7eb needs to be adjusted to lock the tunnel socket while referencing the sub-data structures to derive the socket's IP overhead. Reported-by: NGuillaume Nault <g.nault@alphalink.fr> Tested-by: NGuillaume Nault <g.nault@alphalink.fr> Signed-off-by: NR. Parameswaran <rparames@brocade.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2017 3 次提交
-
-
由 Saeed Mahameed 提交于
Implement mlx5e's IPoIB SKB transmit using the helper functions provided by mlx5e ethernet tx flow, the only difference in the code between mlx5e_xmit and mlx5i_xmit is that IPoIB has some extra fields to fill (UD datagram segment) in the TX descriptor (WQE) and it doesn't need to have any vlan handling. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NErez Shitrit <erezsh@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Erez Shitrit 提交于
IB flow tables need the underlay qp to perform flow steering. Here we change the API of the flow tables creation to accept the underlay QP number as a parameter in order to support IB (IPoIB) flow steering. Signed-off-by: NErez Shitrit <erezsh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Erez Shitrit 提交于
New capability bit: ipoib_enhanced_offloads, indicates new ability for UD QP to do RSS and enhanced IPoIB offloads and acceleration. Add underlay_qpn to the TIS and flow_table objects In order to support SET_ROOT command, to connect between IPoIB QPs and flow steering tables. Signed-off-by: NErez Shitrit <erezsh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 4月, 2017 1 次提交
-
-
由 Ming Lei 提交于
Commit 729204ef("block: relax check on sg gap") allows us to merge bios, if both are physically contiguous. This change can merge a huge number of small bios, through mkfs for example, mkfs.ntfs running time can be decreased to ~1/10. But if one rq starts with a non-aligned buffer (the 1st bvec's bv_offset is non-zero) and if we allow the merge, it is quite difficult to respect sg gap limit, especially the max segment size, or we risk having an unaligned virtual boundary. This patch tries to avoid the issue by disallowing a merge, if the req starts with an unaligned buffer. Also add comments to explain why the merged segment can't end in unaligned virt boundary. Fixes: 729204ef ("block: relax check on sg gap") Tested-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NMing Lei <ming.lei@redhat.com> Rewrote parts of the commit message and comments. Signed-off-by: NJens Axboe <axboe@fb.com>
-
- 14 4月, 2017 5 次提交
-
-
由 Steffen Klassert 提交于
This patch adds all the bits that are needed to do IPsec hardware offload for IPsec states and ESP packets. We add xfrmdev_ops to the net_device. xfrmdev_ops has function pointers that are needed to manage the xfrm states in the hardware and to do a per packet offloading decision. Joint work with: Ilan Tayari <ilant@mellanox.com> Guy Shapiro <guysh@mellanox.com> Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: NGuy Shapiro <guysh@mellanox.com> Signed-off-by: NIlan Tayari <ilant@mellanox.com> Signed-off-by: NYossi Kuperman <yossiku@mellanox.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Steffen Klassert 提交于
This patch adds netdev features to configure IPsec offloads. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Kirill A. Shutemov 提交于
Dave noticed that after fixing MADV_DONTNEED vs numa balancing race the last pmdp_huge_get_and_clear_notify() user is gone. Let's drop the helper. Link: http://lkml.kernel.org/r/20170306112047.24809-1-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Berg 提交于
Now that we have extended error reporting and a new message format for netlink ACK messages, also extend this to be able to return arbitrary cookie data on success. This will allow, for example, nl80211 to not send an extra message for cookies identifying newly created objects, but return those directly in the ACK message. The cookie data size is currently limited to 20 bytes (since Jamal talked about using SHA1 for identifiers.) Thanks to Jamal Hadi Salim for bringing up this idea during the discussions. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Reviewed-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
Add the base infrastructure and UAPI for netlink extended ACK reporting. All "manual" calls to netlink_ack() pass NULL for now and thus don't get extended ACK reporting. Big thanks goes to Pablo Neira Ayuso for not only bringing up the whole topic at netconf (again) but also coming up with the nlattr passing trick and various other ideas. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Reviewed-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 4月, 2017 5 次提交
-
-
由 Sebastian Reichel 提交于
Add serdev helper functions for handling of cts and rts lines using the serdev's tiocm functions. Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NSebastian Reichel <sre@kernel.org> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Sebastian Reichel 提交于
Add method for getting and setting tiocm. Acked-by: NPavel Machek <pavel@ucw.cz> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NSebastian Reichel <sre@kernel.org> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Sebastian Reichel 提交于
Add method, which waits until the transmission buffer has been sent. Note, that the change in ttyport_write_wakeup is related, since tty_wait_until_sent will hang without that change. Acked-by: NRob Herring <robh@kernel.org> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NSebastian Reichel <sre@kernel.org> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexey Dobriyan 提交于
This field is never big enough to warrant 16-bitness. 8-bit accesses enjoy shorted encoding on i386/x86_64 than 16-bit accesses: add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-10 (-10) function old new delta loopback_setup 169 164 -5 ether_setup 148 143 -5 Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Using 16-bit ->hh_len doesn't save any memory, save some .text instead: add/remove: 0/0 grow/shrink: 1/6 up/down: 2/-19 (-17) function old new delta neigh_update 2312 2314 +2 fwnet_header_cache 199 197 -2 eth_header_cache 101 99 -2 ip6_finish_output2 2371 2368 -3 vrf_finish_output6 1522 1518 -4 vrf_finish_output 1413 1409 -4 ip_finish_output2 1627 1623 -4 Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 4月, 2017 2 次提交
-
-
由 Johannes Berg 提交于
There's no need to have struct bpf_map_type_list since it just contains a list_head, the type, and the ops pointer. Since the types are densely packed and not actually dynamically registered, it's much easier and smaller to have an array of type->ops pointer. Also initialize this array statically to remove code needed to initialize it. In order to save duplicating the list, move it to the types header file added by the previous patch and include it in the same fashion. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
There's no need to have struct bpf_prog_type_list since it just contains a list_head, the type, and the ops pointer. Since the types are densely packed and not actually dynamically registered, it's much easier and smaller to have an array of type->ops pointer. Also initialize this array statically to remove code needed to initialize it. In order to save duplicating the list, move it to a new header file and include it in the places needing it. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 4月, 2017 1 次提交
-
-
由 Christoph Hellwig 提交于
Unused now that all callers switched to pci_alloc_irq_vectors. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 4月, 2017 1 次提交
-
-
由 David S. Miller 提交于
This reverts commit def12888. As per discussion between Roopa Prabhu and David Ahern, it is advisable that we instead have the code collect the setlink triggered events into a bitmask emitted in the IFLA_EVENT netlink attribute. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 4月, 2017 1 次提交
-
-
由 Steffen Klassert 提交于
All available gso_type flags are currently in use, so extend gso_type from 'unsigned short' to 'unsigned int' to be able to add further flags. We reorder the struct skb_shared_info to use two bytes of the four byte hole before dataref. All fields before dataref are cleared, i.e. four bytes more than before the change. The remaining two byte hole is moved to the beginning of the structure, this protects us from immediate overwites on out of bound writes to the sk_buff head. Structure layout on x86-64 before the change: struct skb_shared_info { unsigned char nr_frags; /* 0 1 */ __u8 tx_flags; /* 1 1 */ short unsigned int gso_size; /* 2 2 */ short unsigned int gso_segs; /* 4 2 */ short unsigned int gso_type; /* 6 2 */ struct sk_buff * frag_list; /* 8 8 */ struct skb_shared_hwtstamps hwtstamps; /* 16 8 */ u32 tskey; /* 24 4 */ __be32 ip6_frag_id; /* 28 4 */ atomic_t dataref; /* 32 4 */ /* XXX 4 bytes hole, try to pack */ void * destructor_arg; /* 40 8 */ skb_frag_t frags[17]; /* 48 272 */ /* --- cacheline 5 boundary (320 bytes) --- */ /* size: 320, cachelines: 5, members: 12 */ /* sum members: 316, holes: 1, sum holes: 4 */ }; Structure layout on x86-64 after the change: struct skb_shared_info { short unsigned int _unused; /* 0 2 */ unsigned char nr_frags; /* 2 1 */ __u8 tx_flags; /* 3 1 */ short unsigned int gso_size; /* 4 2 */ short unsigned int gso_segs; /* 6 2 */ struct sk_buff * frag_list; /* 8 8 */ struct skb_shared_hwtstamps hwtstamps; /* 16 8 */ unsigned int gso_type; /* 24 4 */ u32 tskey; /* 28 4 */ __be32 ip6_frag_id; /* 32 4 */ atomic_t dataref; /* 36 4 */ void * destructor_arg; /* 40 8 */ skb_frag_t frags[17]; /* 48 272 */ /* --- cacheline 5 boundary (320 bytes) --- */ /* size: 320, cachelines: 5, members: 13 */ }; Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 4月, 2017 2 次提交
-
-
由 Bart Van Assche 提交于
To improve scalability, if hardware queues are shared, restart a single hardware queue in round-robin fashion. Rename blk_mq_sched_restart_queues() to reflect the new semantics. Remove blk_mq_sched_mark_restart_queue() because this function has no callers. Remove flag QUEUE_FLAG_RESTART because this patch removes the code that uses this flag. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Bart Van Assche 提交于
Introduce a function that runs a hardware queue unconditionally after a delay. Note: there is already a function that stops and restarts a hardware queue after a delay, namely blk_mq_delay_queue(). This function will be used in the next patch in this series. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Long Li <longli@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
- 07 4月, 2017 6 次提交
-
-
由 Omar Sandoval 提交于
In elevator_switch(), if blk_mq_init_sched() fails, we attempt to fall back to the original scheduler. However, at this point, we've already torn down the original scheduler's tags, so this causes a crash. Doing the fallback like the legacy elevator path is much harder for mq, so fix it by just falling back to none, instead. Signed-off-by: NOmar Sandoval <osandov@fb.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Michael S. Tsirkin 提交于
Some drivers can't support all features in all configurations. At the moment we blindly set FEATURES_OK and later FAILED. Support this better by adding a callback drivers can use to do some early checks. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Tony Lindgren 提交于
Recent pinctrl changes to allow dynamic allocation of pins exposed one more issue with the pinctrl pins claimed early by the controller itself. This caused a regression for IMX6 pinctrl hogs. Before enabling the pin controller driver we need to wait until it has been properly initialized, then claim the hogs, and only then enable it. To fix the regression, split the code into pinctrl_claim_hogs() and pinctrl_enable(). And then let's require that pinctrl_enable() is always called by the pin controller driver when ready after calling pinctrl_register_and_init(). Depends-on: 950b0d91 ("pinctrl: core: Fix regression caused by delayed work for hogs") Fixes: df61b366af26 ("pinctrl: core: Use delayed work for hogs") Fixes: e566fc11 ("pinctrl: imx: use generic pinctrl helpers for managing groups") Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Nishanth Menon <nm@ti.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be> Tested-by: NGary Bisson <gary.bisson@boundarydevices.com> Tested-by: NFabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Guy Ergas 提交于
Add support for rx-fcs flag from ethtool. In case this flag is set, update all RQs to scatter the FCS data into the packet. Signed-off-by: NGuy Ergas <guye@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Mintz, Yuval 提交于
Now that management firmware is capable of telling us the number of CQs available for a given PF, qed needs to communicate the number to qedi so it would know have many to use. Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 R. Parameswaran 提交于
A new function, kernel_sock_ip_overhead(), is provided to calculate the cumulative overhead imposed by the IP Header and IP options, if any, on a socket's payload. The new function returns an overhead of zero for sockets that do not belong to the IPv4 or IPv6 address families. This is used in the L2TP code path to compute the total outer IP overhead on the L2TP tunnel socket when calculating the default MTU for Ethernet pseudowires. Signed-off-by: NR. Parameswaran <rparames@brocade.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 4月, 2017 2 次提交
-
-
由 Vlad Yasevich 提交于
When netdev events happen, a rtnetlink_event() handler will send messages for every event in it's white list. These messages contain current information about a particular device, but they do not include the iformation about which event just happened. The consumer of the message has to try to infer this information. In some cases (ex: NETDEV_NOTIFY_PEERS), that is not possible. This patch adds a new extension to RTM_NEWLINK message called IFLA_EVENT that would have an encoding of the which event triggered this message. This would allow the the message consumer to easily determine if it is interested in a particular event or not. Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vic Yang 提交于
For SPI, we can get up to 32 additional bytes for response preamble. The current overhead (2 bytes) may cause problems when we try to receive a big response. Update it to 32 bytes. Without this fix we could see a kernel BUG when we receive a big response from the Chrome EC when is connected via SPI. Signed-off-by: NVic Yang <victoryang@google.com> Tested-by: Enric Balletbo i Serra <enric.balletbo.collabora.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
- 04 4月, 2017 6 次提交
-
-
由 Philipp Zabel 提交于
Rename the internal __reset_control_get/put functions to __reset_control_get/put_internal and add an exported __reset_control_get equivalent to __of_reset_control_get that takes a struct device parameter. This avoids the confusing call to __of_reset_control_get in the non-DT case and fixes the devm_reset_control_get_optional function to return NULL if RESET_CONTROLLER is enabled but dev->of_node == NULL. Fixes: bb475230 ("reset: make optional functions really optional") Reported-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Ramiro Oliveira <Ramiro.Oliveira@synopsys.com> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
由 Mario Kicherer 提交于
This patch adds initial support for network namespaces. The changes only enable support in the CAN raw, proc and af_can code. GW and BCM still have their checks that ensure that they are used only from the main namespace. The patch boils down to moving the global structures, i.e. the global filter list and their /proc stats, into a per-namespace structure and passing around the corresponding "struct net" in a lot of different places. Changes since v1: - rebased on current HEAD (2bfe01ef) - fixed overlong line Signed-off-by: NMario Kicherer <dev@kicherer.org> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Yegor Yefremov 提交于
This patch converts TI HECC driver to DT only driver. This results in removing ti_hecc.h containing now obsolete platform data. Former transceiver_switch callback function will be now modelled via regulator API. Signed-off-by: NAnton Glukhov <anton.a.glukhov@gmail.com> Signed-off-by: NYegor Yefremov <yegorslists@googlemail.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Christoffer Dall 提交于
As an oversight, for GICv2, we accidentally export the GICC_PMR register in the format of the GICH_VMCR.VMPriMask field in the lower 5 bits of a word, meaning that userspace must always use the lower 5 bits to communicate with the KVM device and must shift the value left by 3 places to obtain the actual priority mask level. Since GICv3 supports the full 8 bits of priority masking in the ICH_VMCR, we have to fix the value we export when emulating a GICv2 on top of a hardware GICv3 and exporting the emulated GICv2 state to userspace. Take the chance to clarify this aspect of the ABI. Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <cdall@linaro.org>
-
由 Ram Amrani 提交于
It's possible some configurations would prevent driver from utilizing all the Memory Regions due to a lack of ILT lines. In such a case, calculate how many memory regions would have to be dropped due to limit, and manage without those. Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Greg Ungerer 提交于
Add support for the net stats64 counters to the usbnet core. With that in place put the hooks into every usbnet driver to use it. This is a strait forward addition of 64bit counters for RX and TX packet and byte counts. It is done in the same style as for the other net drivers that support stats64. Note that the other stats fields remain as 32bit sized values (error counts, etc). The motivation to add this is that it is not particularly difficult to get the RX and TX byte counts to wrap on 32bit platforms. Signed-off-by: NGreg Ungerer <gerg@linux-m68k.org> Acked-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-