This patch adds MDMA/UDMA support using BestComm for DMA on the MPC5200
platform.  Based heavily on previous work by Freescale (Bernard Kuhn,
John Rigby) and Domen Puncer.

With this patch, a SanDisk Extreme IV CF card gets read speeds of
approximately 26.70 MB/sec.
Signed-off-by: NTim Yamin <plasm@roo.me.uk>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

When ATA DMA is enabled, bestcomm prefetching does not work.  This
patch adds a function to disable bestcomm prefetch when the ATA
Bestcomm task is initialized.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

1) ata.h has dst_pa in the wrong place (needs to match what the BestComm
   task microcode in bcom_ata_task.c expects); fix it.

2) The BestComm ATA task priority was changed to maximum in bestcomm_priv.h;
   this fixes a deadlock issue experienced with heavy DMA occurring on
   both the ATA and Ethernet BestComm tasks, e.g. when downloading a large
   file over a LAN to disk.
Signed-off-by: NTim Yamin <plasm@roo.me.uk>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

The buffer descriptors for the ATA BestComm task are larger than the
current definition for bcom_bd.  This causes problems because the
various bcom_... functions dereference the buffer descriptor pointer
by using the array operator which doesn't work when the buffer
descriptors are a different size.

This patch adds the bcom_get_bd() function which uses the value in
bcom_task.bd_size to calculate the offset into the BD table.  This
patch also changes the definition of bcom_bd to specify a data size
of 0 instead of 1 so that it will never work if anyone attempts to
dereference the bd list as an array (as opposed to something that
might work even though it is wrong).

Finally, this patch moves the definition of bcom_bd up in the file
to eliminate a forward declaration.

Based on patch originally written by Tim Yamin.
Signed-off-by: NTim Yamin <plasm@roo.me.uk>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

The MPC5200 internal interrupt controller setup function needs to set
the default interrupt controller when it is called.  Without this
irq_create_of_mapping() cannot be called without first determining
the pointer to the irq controller (ie. call with controller = NULL).
Reported-by: NSteven Cavanagh <scavanagh@secretlab.ca>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This patch adds documentation to the mpc5200 interrupt controller
driver and cleans up some minor coding conventions.  It also moves the
contents of mpc52xx_pic.h into the driver proper (except for a small
common bit that is moved to the common mpc52xx.h) because the
information encoded there is not required by any other part of kernel
code.  Finally for code readability sake, the L2_OFFSET shift value
is removed because the code using it resolves to a noop.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Rework to MMU code dropped a much missed 'blr' instruction.
Brown-Paper-Bag-Worn-By: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

The correct #address-cells was still used for the actual translation,
so the impact is only a possibility of choosing the wrong range entry
or failing to find any match.  Most common cases were not affected.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add const qualifier to device_node argument for
dcr_resource_{start,len} as of_get_property also const-qualifies this
argument.
Signed-off-by: NGrant Erickson <gerickson@nuovations.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

After discussing with chip designers, it appears that it's not
necessary to set G everywhere on 440 cores. The various core
errata related to prefetch should be sorted out by firmware by
disabling icache prefetching in CCR0. We add the workaround to
the kernel however just in case oooold firmwares don't do it.

This is valid for -all- 4xx core variants. Later ones hard wire
the absence of prefetch but it doesn't harm to clear the bits
in CCR0 (they should already be cleared anyway).

We still leave G=1 on the linear mapping for now, we need to
stop over-mapping RAM to be able to remove it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Currently, we never set _PAGE_COHERENT in the PTEs, we just OR it in
in the hash code based on some CPU feature bit.  We also manipulate
_PAGE_NO_CACHE and _PAGE_GUARDED by hand in all sorts of places.

This changes the logic so that instead, the PTE now contains
_PAGE_COHERENT for all normal RAM pages thay have I = 0 on platforms
that need it.  The hash code clears it if the feature bit is not set.

It also adds some clean accessors to setup various valid combinations
of access flags and change various bits of code to use them instead.

This should help having the PTE actually containing the bit
combinations that we really want.

I also removed _PAGE_GUARDED from _PAGE_BASE on 44x and instead
set it explicitely from the TLB miss.  I will ultimately remove it
completely as it appears that it might not be needed after all
but in the meantime, having it in the TLB miss makes things a
lot easier.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This makes the MMU context code used for CPUs with no hash table
(except 603) dynamically allocate the various maps used to track
the state of contexts.

Only the main free map and CPU 0 stale map are allocated at boot
time.  Other CPU maps are allocated when those CPUs are brought up
and freed if they are unplugged.

This also moves the initialization of the MMU context management
slightly later during the boot process, which should be fine as
it's really only needed when userland if first started anyways.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The handlers for Critical, Machine Check or Debug interrupts
will save and restore MMUCR nowadays, thus we only need to
disable normal interrupts when invalidating TLB entries.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Currently, the various forms of low level TLB invalidations are all
implemented in misc_32.S for 32-bit processors, in a fairly scary
mess of #ifdef's and with interesting duplication such as a whole
bunch of code for FSL _tlbie and _tlbia which are no longer used.

This moves things around such that _tlbie is now defined in
hash_low_32.S and is only used by the 32-bit hash code, and all
nohash CPUs use the various _tlbil_* forms that are now moved to
a new file, tlb_nohash_low.S.

I moved all the definitions for that stuff out of
include/asm/tlbflush.h as they are really internal mm stuff, into
mm/mmu_decl.h

The code should have no functional changes.  I kept some variants
inline for trivial forms on things like 40x and 8xx.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This commit moves the whole no-hash TLB handling out of line into a
new tlb_nohash.c file, and implements some basic SMP support using
IPIs and/or broadcast tlbivax instructions.

Note that I'm using local invalidations for D->I cache coherency.

At worst, if another processor is trying to execute the same and
has the old entry in its TLB, it will just take a fault and re-do
the TLB flush locally (it won't re-do the cache flush in any case).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We're soon running out of CPU features and I need to add some new
ones for various MMU related bits, so this patch separates the MMU
features from the CPU features.  I moved over the 32-bit MMU related
ones, added base features for MMU type families, but didn't move
over any 64-bit only feature yet.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This reworks the context management code used by 4xx,8xx and
freescale BookE.  It adds support for SMP by implementing a
concept of stale context map to lazily flush the TLB on
processors where a context may have been invalidated.  This
also contains the ground work for generalizing such lazy TLB
flushing by just picking up a new PID and marking the old one
stale.  This will be implemented later.

This is a first implementation that uses a global spinlock.

Ideally, we should try to get at least the fast path (context ID
already assigned) lockless or limited to a per context lock,
but for now this will do.

I tried to keep the UP case reasonably simple to avoid adding
too much overhead to 8xx which does a lot of context stealing
since it effectively has only 16 PIDs available.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This splits the mmu_context handling between 32-bit hash based
processors, 64-bit hash based processors and everybody else.  This is
preliminary work for adding SMP support for BookE processors.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This adds supports to the "extended" DCR addressing via the indirect
mfdcrx/mtdcrx instructions supported by some 4xx cores (440H6 and
later).

I enabled the feature for now only on AMCC 460 chips.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When running Active Memory Sharing, pages can get marked as
"loaned" with the hypervisor by the CMM driver. This state gets
cleared by the system firmware when rebooting the partition.
When using kexec to boot a new kernel, this state never gets
cleared and the hypervisor and CMM driver can get out of sync
with respect to the number of pages currently marked "loaned".
Fix this by adding a reboot notifier to the CMM driver to deflate
the balloon and mark all pages as active.
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When running Active Memory Sharing, the Collaborative Memory Manager
(CMM) may mark some pages as "loaned" with the hypervisor.
Periodically, the CMM will query the hypervisor for a loan request,
which is a single signed value.  When kexec'ing into a kdump kernel,
the CMM driver in the kdump kernel is not aware of the pages the
previous kernel had marked as "loaned", so the hypervisor and the CMM
driver are out of sync.  This results in the CMM driver getting a
negative loan request, which can then get treated as a large unsigned
value and can cause kdump to hang due to the CMM driver inflating too
large.  Since there really is no clean way for the CMM driver in the
kdump kernel to clean this up, simply disable CMM in the kdump kernel.
This fixes hangs we were seeing doing kdump with AMS.
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Otherwise you get lot of errors like these:

drivers/block/viodasd.c:72: error: dereferencing pointer to incomplete type
drivers/block/viodasd.c: In function 'viodasd_open':
drivers/block/viodasd.c:135: error: dereferencing pointer to incomplete type
drivers/block/viodasd.c: In function 'viodasd_release':
drivers/block/viodasd.c:184: error: dereferencing pointer to incomplete type
drivers/block/viodasd.c: In function 'viodasd_getgeo':
drivers/block/viodasd.c:209: error: dereferencing pointer to incomplete type
drivers/block/viodasd.c:214: error: implicit declaration of function 'get_capacity'
drivers/block/viodasd.c: At top level:
drivers/block/viodasd.c:222: error: variable 'viodasd_fops' has initializer but incomplete type
drivers/block/viodasd.c:223: error: unknown field 'owner' specified in initializer

Discovered by a randconfig build.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The ctrl-o (^O) is a common control key used by several applications,
such as vim, but hvc_console uses ^O as the magic-sysrq key.  This
commit allows users to send ^O to applications by pressing ^O twice
in succession.

To implement this, this commit introduces a check if ^O is pressed
again if the sysrq_pressed variable is already set.  In this case,
clear sysrq_pressed state and flip the ^O character to the tty.  (The
old behavior has always set "sysrq_pressed" if ^O has been entered,
and it has not flipped the ^O character to the tty.)
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

ibm_configure_kernel_dump is passed as the token to rtas_call() is
never initialised.  This sets it to something sane.
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Acked-by: NNathan Lynch <ntl@pobox.com>
Acked-by: NManish Ahuja <mahujam@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

print_dump_header() will be called at least once with a NULL pointer in
a normal boot sequence.  If DEBUG is defined then we will dereference
the pointer and crash.  Add a quick fix to exit early in the NULL pointer
case.
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Acked-by: NManish Ahuja <mahujam@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Rename PowerPC's struct vm_region so that I can introduce my own
global version for NOMMU.  It's feasible that the PowerPC version may
wish to use my global one instead.

The NOMMU vm_region struct defines areas of the physical memory map
that are under mmap.  This may include chunks of RAM or regions of
memory mapped devices, such as flash.  It is also used to retain
copies of file content so that shareable private memory mappings of
files can be made.  As such, it may be compatible with what is
described in the banner comment for PowerPC's vm_region struct.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Using the common code means that more complete cache information will
provided in sysfs on platforms that don't use the l2-cache property
convention.
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The smp code uses cache information to populate cpu_core_map; change
it to use common code for cache lookup.
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We have more than one piece of code that looks up cache nodes manually
using the "l2-cache" property.  Add a common helper routine which does
this and handles ePAPR's "next-level-cache" property as well as
powermac.
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This function is used to count how many GPIOs are specified for
a device node.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Given this list (contains three gpio specifiers, one of which is a hole):

gpios = <&phandle1 1 2 3
         0 /* a hole */
         &phandle2 4 5 6>;

of_parse_phandles_with_args() would report -ENOENT for the `hole'
specifier item, the same error value is used to report the end of the
list, for example.

Sometimes we want to differentiate holes from real errors -- for
example when we want to count all the [syntax correct] specifiers.

With this patch of_parse_phandles_with_args() will report -EEXITS when
somebody requested to parse a hole.

Also, make the out_{node,args} arguments optional, when counting we
don't really need the out values.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

By using 'list++' in the beginning we can simplify the code a
little bit.
Suggested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

* 'i2c-fixes' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c-s3c2410: fix check for being in suspend.
  i2c-cpm: Detect and report NAK right away instead of timing out

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Add JBD2 compat feature bit.
  ocfs2: Always update xattr search when creating bucket.

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole display
  USB: set correct configuration in probe of ti_usb_3410_5052
  USB: add 5372:2303 to pl2303
  USB: skip Set-Interface(0) if already in altsetting 0
  USB: fix comment about endianness of descriptors
  USB: Documentation/usb/gadget_serial.txt: update to match driver use_acm behaviour
  usbmon: drop bogus 0t from usbmon.txt
  USB: gadget: fix rndis working at high speed
  USB: ftdi_sio: Adding Ewert Energy System's CANdapter PID
  USB: tty: SprogII DCC controller identifiers
  usb-storage: update unusual_devs entry for Nokia 5310
  USB: Unusual devs patch for Nokia 3500c
  USB: storage: unusual_devs.h: Nokia 3109c addition
  USB: fix problem with usbtmc driver not loading properly

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  STAGING: Move staging drivers back to staging-specific menu
  driver core: add newlines to debugging enabled/disabled messages
  xilinx_hwicap: remove improper wording in license statement
  driver core: fix using 'ret' variable in unregister_dynamic_debug_module

While testing a kernel with memory poisoning enabled, I saw some warnings
about the redzone getting clobbered when chasing DFS referrals. The
buffer allocation for the unicode converted version of the searchName is
too small and needs to take null termination into account.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Acked-by: NSteve French <sfrench@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc:
  powerpc: Fix corruption error in rh_alloc_fixed()
  powerpc/fsl-booke: Fix the miss interrupt restore

Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>