The local variable `card` in `jr3_pci_auto_attach()` is used to point to
the PCI device `struct pci_dev`.  Rename it to `pcidev`.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not need to support manual attachment of supported PCI
devices.  Replace the `attach()` hook (`jr3_pci_attach()`) with an
`auto_attach()` hook (`jr3_pci_auto_attach()`).  This will be called via
`comedi_pci_auto_config()` at PCI probe time.

This driver no longer increments the PCI reference count during
attachment, so remove the call to `pci_dev_put()` when detaching the
device.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver is missing the MODULE_* information. Add the standard
comedi info.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This define exists in hwdrv_APCI1710.c, where it's actually used.
Remove the duplicate define.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These values in the boardinfor were used in the common addi-data
attach code to work out use of the PCI bars. Since this driver
has a localized attach we already know the use of the bars so
this information in the boardinfo is unnecessary.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not have an eeprom and does not use the data
saved in devpriv->s_EeParameters. Remove the code that initalizes
the eeprom parameters.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not use dma. Remove the code that sets up the
dma and allocates the buffers in the attach and the code that
frees the buffers in the detach.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The apci1710 board does not have an eeprom. Remove the unnecessary
code to handle it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver is now separate from the "common" code used with the
addi-data drivers. There is no need to use i_ADDI_Reset() to call
the correct "reset" function.

Remove the i_ADDI_Reset() function and the 'reset' pointer to the
real function from the boardinfo and just call the function directly
where needed.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver uses the comedi PCI auto attach mechanism and the comedi
core does not use the boardinfo during the attach.

Now that this driver has the attach separated from addi_common.c we
can remove passing the boardinfo in the comedi_driver and cleanup
the code that finds the boardinfo.

Also, rename addi_find_boardinfo() so it has namespace associated
with this driver.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the addi_apci_1710 driver is not using addi_common.c we can
remove the CONFIG_APCI_1710 define and all the special handling for
the initialization of it's subdevices.

Also remove the i_ADDIDATA_InsnReadEeprom() function from the
addi_apci_1710 driver. This board does not have an eeprom subdevice
and does not use this function.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This addi-data driver uses a private function to initialize all
the subdevices during the attach of the board.

Copy the code in addi_common.c to this driver and remove the #include
that caused addi_common.c to be compiled with this driver. This will
allow removing the special handling for the apci1710 board in the
common code.

Rename the attach_pci and detach functions so they have namespace
associated with this driver.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat the comment used to describe the Comedi driver to use the usual
block comment style.

Update the information reflecting the fact that the driver no longer
supports manual attachment of devices via the `COMEDI_DEVCONFIG` ioctl.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the `DEBUG_PRINT(format, args...)` macro used by this module to
use either `pr_debug()` (if macro `HPDI_DEBUG` is defined) or
`no_printk()` instead of `printk()` or nothing.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When requesting PCI region resources and IRQ, use the board name as the
resource owner string instead of the driver name.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the type of the `name` member of `struct hpdi_board` from `char
*` to `const char *` as it should not be modifiable.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The `board(dev)` function just casts `dev->board_ptr` to a pointer to
the private data type `struct hpdi_private` and returns it.  It's only
called from one function: `hpdi_auto_attach()`.

Remove `board()` and use a local variable to point to the `struct
hpdi_private` data structure.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In `struct hpdi_private`, the `plx9080_phys_iobase` and
`hpdi_phys_iobase` hold the physical memory addresses from the PCI
BARs used by this driver.  The physical addresses are only really needed
when ioremapping the resources when the device is being attached by
`hpdi_auto_attach()`.  A non-zero value of the `hpdi_phys_iobase` is
also used to indicate that a call to `comedi_pci_enable()` was
successful so that `comedi_pci_disable()` should be called when the
device is detached by `hpdi_detach()`.

Remove the `plx9080_phys_iobase` and `hpdi_phys_iobase` members and use
`dev->iobase` as a flag to indicate whether `comedi_pci_disable()` needs
to be called by `hpdi_detach()`.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The `hw_dev` member of `struct hpdi_private` is used to point to the
`struct pci_dev`.  This is redundant as the `struct comedi_device`
already has a pointer to the `struct device` within the `struct pci_dev`
and there is a convenient inline function, `comedi_to_pci_dev(dev)` that
returns a pointer to the `struct pci_dev`.

Remove the redundant `hw_dev` member and use alternate ways to get at
the `struct pci_dev`.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not need to support manual attachment of supported PCI
devices.  Replace the `attach()` hook (`hpdi_attach()`) with an
`auto_attach()` hook (`hpdi_auto_attach()`).  This will be called via
`comedi_pci_auto_config()` at PCI probe time.

This driver no longer increments the PCI reference during attachment, so
remove the call to `pci_dev_put()` when detaching the device.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

there are function definitions missing for these prototypes, so
remove all 3 function protos.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

these function prototypes are missing the function definition,
remove them all.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

the function definitions are missing for these prototypes, so remove all
these.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

sme_ap_config misses a check of the return of the sme_wait_for_reply
as all other functions do here, for the return of sme_wait_for_reply
add the check and fail if it returns other than 0.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

remove the braces around single statement if blocks
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

replace spaces at start of line with tabs in sme_mgt_tspec
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

replace spaces at the beginning of the line with tabs in sme_mgt_packet_filter_set
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

replace spaces with tabs at the start of line
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

remove braces to single statement if blocks
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver is an example of how to write a Comedi driver and includes
some code for handling PCI devices, but not very much.  It calls
`comedi_pci_auto_config()` at PCI probe time.  That normally expects to
call the comedi driver's `auto_attach()` hook (or the deprecated
`attach_pci()` hook), but will fall back to using the `attach()` hook
that should only be used for attaching devices "manually" via the
`COMEDI_DEVCONFIG` ioctl.

Add an `auto_attach()` hook (`skel_auto_attach()`) to handle
auto-attachment of supported PCI devices.  Add comments to the
`attach()` hook (`skel_attach()`) to indicate that it shouldn't
generally allow PCI devices to be attached that way (and probably isn't
needed at all for PCI-only Comedi drivers).  Add code to the `detach()`
hook (`skel_detach()`) to disable PCI devices enabled by the
`auto_attach()` hook.

`skel_auto_attach()` calls new function `skel_find_pci_board()` to find
a matching element in `skel_boards[]`.  PCI device ID information has
been added to `skel_boards[]` to give the function something to look
for.

Remove the `pci_dev` member of `struct skel_private` as drivers now use
the `hw_dev` member of `struct comedi_device` to get at the PCI device.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Move `skel_pci_table[]` closer to `skel_pci_table` so it falls within
the same `#ifdef`.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Move `skel_ns_to_timer()` up so it's forward declaration can be removed.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Move `skel_attach()`, `skel_detach()` and `skel_driver` down the file so
that a bunch of forward declarations can be removed.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the `module_comedi_pci_driver()` macro to register the module as a
comedi PCI driver instead of adding the boiler-plate code in full.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the `driver_` prefix from variable and function names.  Rename
`driver_skel` to `skel_driver`.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the dev_info() etc. instead of pr_info() etc.  Remove a couple of
them that seemed a bit pointless.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver's `thisboard` macro relies on a local variable having a
specific name.  Replace it with a local variable of the same name in the
functions that use it.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch warnings.
- WARNING: printk() should include KERN_ facility level
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch error.
- ERROR: do not initialise statics to 0 or NULL
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch warnings.
- WARNING: please, no spaces at the start of a line
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>