- 07 12月, 2017 1 次提交
-
-
由 Pixel Ding 提交于
Retry at drm_dev_register instead of amdgpu_device_init. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NPixel Ding <Pixel.Ding@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 05 12月, 2017 3 次提交
-
-
由 pding 提交于
Signed-off-by: Npding <Pixel.Ding@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 pding 提交于
Also finalize kfd inside amdgpu_device_fini. kfd device_init needs SRIOV exclusive accessing. Try to gather exclusive accessing to reduce time consuming. Signed-off-by: Npding <Pixel.Ding@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 pding 提交于
The exclusive mode has real-time limitation in reality, such like being done in 300ms. It's easy observed if running many VF/VMs in single host with heavy CPU workload. If we find the init fails due to exclusive mode timeout, try it again. v2: - rewrite the condition for readable value. v3: - fix typo, add comments for sleep Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: Npding <Pixel.Ding@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 20 10月, 2017 3 次提交
-
-
由 Christian König 提交于
Allows userspace to figure out if VRAM was lost. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NNicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Instead of per device track the VRAM lost per context and return ECANCELED instead of ENODEV. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NNicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Keep blocking the CS, but revert everything else. Mapping BOs and info IOCTL are harmless and can still happen even when VRAM content ist lost. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NNicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 10 10月, 2017 1 次提交
-
-
由 Andres Rodriguez 提交于
The AMDGPU_SCHED_OP_PROCESS_PRIORITY_OVERRIDE ioctls are used to set the priority of a different process in the current system. When a request is dropped, the process's contexts will be restored to the priority specified at context creation time. A request can be dropped by setting the override priority to AMDGPU_CTX_PRIORITY_UNSET. An fd is used to identify the remote process. This is simpler than passing a pid number, which is vulnerable to re-use, etc. This functionality is limited to DRM_MASTER since abuse of this interface can have a negative impact on the system's performance. v2: removed unused output structure v3: change refcounted interface for a regular set operation Signed-off-by: NAndres Rodriguez <andresx7@gmail.com> Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 07 10月, 2017 1 次提交
-
-
由 Marek Olšák 提交于
for being able to convert an amdgpu fence into one of the handles. Mesa will use this. Reviewed-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NMarek Olšák <marek.olsak@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 27 9月, 2017 3 次提交
-
-
由 Harry Wentland 提交于
Supported DCE versions: 8.0, 10.0, 11.0, 11.2 v2: rebase against 4.11 Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Felix Kuehling 提交于
Allows assigning a PASID to a VM for identifying VMs involved in page faults. The global PASID manager is also exported in the KFD interface so that AMDGPU and KFD can share the PASID space. PASIDs of different sizes can be requested. On APUs, the PASID size is deterined by the capabilities of the IOMMU. So KFD must be able to allocate PASIDs in a smaller range. Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 18 8月, 2017 4 次提交
-
-
由 Roger He 提交于
adds fragment_size in the vm_manager structure and implements hardware setup for it. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NRoger He <Hongbo.He@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Move the CSA bo_va from the VM to the fpriv structure. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Looks like a better place for this. v2: use atomic64_t members instead Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
It doesn't make much sense to count those numbers twice. v2: use and atomic64_t instead Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 16 8月, 2017 1 次提交
-
-
由 Felix Kuehling 提交于
kfd2kgd is device-specific, so it should not be a global variable. Merge amdgpu_amdkfd_load_interface and amdgpu_amdkfd_device_probe so that it's only needed as a local variable in one function. Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 26 7月, 2017 2 次提交
-
-
由 Christian König 提交于
The fragment bits work differently for Vega10 compared to previous generations. Increase the fragment size to 2MB for now to better handle that. v2: handle the hardware setup as well Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-and-tested-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Xiangliang Yu 提交于
Currently, get clock info from default clk of pm if dpm is disable. Buf SRIOV doesn't support dpm and pm, can't get anything from pm. Only get clock info only from default clk of amdgpu for SRIOV. And driver get pm default clk also from amdgpu default clk and never be changed by others. So use amdgpu default clk value for SRIOV and non-dpm cases. Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 14 7月, 2017 1 次提交
-
-
由 Christian König 提交于
Use the TTM values instead of the hardware config here. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 30 6月, 2017 1 次提交
-
-
由 Flora Cui 提交于
Newer asics with 4 SEs are not able to fit the entire bitmask in the original field, use an array instead. v2: keep cu_ao_mask for backward compatibility. Signed-off-by: NFlora Cui <Flora.Cui@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 09 6月, 2017 1 次提交
-
-
由 Harish Kasiviswanathan 提交于
Add VM update mode module param (amdgpu.vm_update_mode) that can used to control how VM pde/pte are updated for Graphics and Compute. BIT0 controls Graphics and BIT1 Compute. BIT0 [= 0] Graphics updated by SDMA [= 1] by CPU BIT1 [= 0] Compute updated by SDMA [= 1] by CPU By default, only for large BAR system vm_update_mode = 2, indicating that Graphics VMs will be updated via SDMA and Compute VMs will be updated via CPU. And for all all other systems (by default) vm_update_mode = 0 Signed-off-by: NHarish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 08 6月, 2017 3 次提交
-
-
由 Michel Dänzer 提交于
Even if CONFIG_DRM_AMDGPU_CIK is enabled. There is no feature parity yet for CIK, in particular amdgpu doesn't support HDMI/DisplayPort audio without DC. v2: * Clarify the lack of feature parity being related to HDMI/DP audio. * Fix "SI" typo in DRM_AMDGPU_CIK help entry. Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
-
由 Felix Kuehling 提交于
If AMDGPU supports SI, add a module parameter to control SI support. It's off by default in AMDGPU as long as SI suppost is experimental, while it is on by default in radeon. Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Acked-by: NMichel Dänzer <michel.daenzer@amd.com> [ Michel Dänzer: Squash in amdgpu_si_support initialization fix ] Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Felix Kuehling 提交于
If AMDGPU supports CIK, add a module parameter to control CIK support. It's on by default in AMDGPU, while it is off by default in radeon. Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Acked-by: NMichel Dänzer <michel.daenzer@amd.com>
-
- 25 5月, 2017 6 次提交
-
-
由 Marek Olšák 提交于
v2: bump the DRM version Signed-off-by: NMarek Olšák <marek.olsak@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Chunming Zhou 提交于
below ioctl will return -ENODEV: amdgpu_cs_ioctl amdgpu_cs_wait_ioctl amdgpu_cs_wait_fences_ioctl amdgpu_gem_va_ioctl amdgpu_info_ioctl v2: only for map and replace cases in amdgpu_gem_va_ioctl Signed-off-by: NChunming Zhou <David1.Zhou@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Leo Liu 提交于
Signed-off-by: NLeo Liu <leo.liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Leo Liu 提交于
Not required on raven. Signed-off-by: NLeo Liu <leo.liu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Leo Liu 提交于
Signed-off-by: NLeo Liu <leo.liu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Chunming Zhou 提交于
It will be used for reserving vmid for shader debugging that requires a fixed vmid. v2: fix warning (Alex) Signed-off-by: NChunming Zhou <David1.Zhou@amd.com> Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 10 5月, 2017 3 次提交
-
-
由 Daniel Vetter 提交于
If we restrict this helper to only kms drivers (which is the case) we can look up the correct mode easily ourselves. But it's a bit tricky: - All legacy drivers look at crtc->hwmode. But that is updated already at the beginning of the modeset helper, which means when we disable a pipe. Hence the final timestamps might be a bit off. But since this is an existing bug I'm not going to change it, but just try to be bug-for-bug compatible with the current code. This only applies to radeon&amdgpu. - i915 tries to get it perfect by updating crtc->hwmode when the pipe is off (i.e. vblank->enabled = false). - All other atomic drivers look at crtc->state->adjusted_mode. Those that look at state->requested_mode simply don't adjust their mode, so it's the same. That has two problems: Accessing crtc->state from interrupt handling code is unsafe, and it's updated before we shut down the pipe. For nonblocking modesets it's even worse. For atomic drivers try to implement what i915 does. To do that we add a new hwmode field to the vblank structure, and update it from drm_calc_timestamping_constants(). For atomic drivers that's called from the right spot by the helper library already, so all fine. But for safety let's enforce that. For legacy driver this function is only called at the end (oh the fun), which is broken, so again let's not bother and just stay bug-for-bug compatible. The benefit is that we can use drm_calc_vbltimestamp_from_scanoutpos directly to implement ->get_vblank_timestamp in every driver, deleting a lot of code. v2: Completely new approach, trying to mimick the i915 solution. v3: Fixup kerneldoc. v4: Drop the WARN_ON to check that the vblank is off, atomic helpers currently unconditionally call this. Recomputing the same stuff should be harmless. v5: Fix typos and move misplaced hunks to the right patches (Neil). v6: Undo hunk movement (kbuild). Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Cc: Eric Anholt <eric@anholt.net> Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-4-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
It's overkill to have a flag parameter which is essentially used just as a boolean. This takes care of core + adjusting drivers. Adjusting the scanout position callback is a bit harder, since radeon also supplies it's own driver-private flags in there. v2: Fixup misplaced hunks (Neil). v3: kbuild says v1 was better ... Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Cc: Eric Anholt <eric@anholt.net> Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-2-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
There's really no reason for anything more: - Calling this while the crtc vblank stuff isn't set up is a driver bug. Those places alrready DRM_ERROR. - Calling this when the crtc is off is either a driver bug (calling drm_crtc_handle_vblank at the wrong time) or a core bug (for anything else). Again, we DRM_ERROR. - EINVAL is checked at higher levels already, and if we'd use struct drm_crtc * instead of (dev, pipe) it would be real obvious that those are again core bugs. The only valid failure mode is crap hardware that couldn't sample a useful timestamp, to ask the core to just grab a not-so-accurate timestamp. Bool is perfectly fine for that. v2: Also fix up the one caller, I lost that in the shuffling (Jani). v3: Fixup commit message (Neil). Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Cc: Eric Anholt <eric@anholt.net> Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-1-daniel.vetter@ffwll.ch
-
- 06 5月, 2017 2 次提交
-
-
由 Guenter Roeck 提交于
alpha:allmodconfig fails to build as follows. drivers/gpu/drm/amd/amdgpu/amdgpu.h:1006:2: error: expected identifier before '(' token drivers/gpu/drm/amd/amdgpu/amdgpu.h:1011:28: error: 'NGG_BUF_MAX' undeclared here The problem is not really the enum definition of NGG_BUF_MAX but PARAM, which happens to be defined differently for alpha and a couple of other architectures. Use less generic defines for NGG enums to solve the problem. Fixes: bce23e00 ("drm/amdgpu: add NGG parameters") Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
We already have this info: max_gs_threads. Drop the duplicate. Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 29 4月, 2017 2 次提交
-
-
由 Michel Dänzer 提交于
Some of these paths probably cannot be interrupted by a signal anyway. Those that can would fail to clean up things if they actually got interrupted. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Junwei Zhang 提交于
v2: 64-bit aligned for gpu info v3: squash in wave_front_fix Signed-off-by: NKen Wang <Qingqing.Wang@amd.com> Signed-off-by: NJunwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NQiang Yu <Qiang.Yu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 07 4月, 2017 2 次提交
-
-
由 Alex Xie 提交于
Signed-off-by: NAlex Xie <AlexBin.Xie@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Xie 提交于
Signed-off-by: NAlex Xie <AlexBin.Xie@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-