- 26 4月, 2006 26 次提交
-
-
由 Al Viro 提交于
Switched to use of sys_pread64()/sys_pwrite64() rather than keep duplicating their guts; among the little things that had been missing there were such as ret = security_file_permission (file, MAY_READ); Gotta love the LSM robustness, right? Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
sbi->s_group_desc is an array of pointers to buffer_head. memcpy() of buffer size from address of buffer_head is a bad idea - it will generate junk in any case, may oops if buffer_head is close to the end of slab page and next page is not mapped and isn't what was intended there. IOW, ->b_data is missing in that call. Fortunately, result doesn't go into the primary on-disk data structures, so only backup ones get crap written to them; that had allowed this bug to remain unnoticed until now. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://brick.kernel.dk/data/git/linux-2.6-block由 Linus Torvalds 提交于
* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] splice: add ->splice_write support for /dev/null [PATCH] splice: rearrange moving to/from pipe helpers [PATCH] Add support for the sys_vmsplice syscall [PATCH] splice: fix offset problems [PATCH] splice: fix min() warning
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] forcedeth: fix initialization [PATCH] sky2: version 1.2 [PATCH] sky2: reset function can be devinit [PATCH] sky2: use ALIGN() macro [PATCH] sky2: add fake idle irq timer [PATCH] sky2: reschedule if irq still pending [PATCH] bcm43xx: make PIO mode usable [PATCH] bcm43xx: add to MAINTAINERS [PATCH] softmac: fix SIOCSIWAP [PATCH] Fix crash on big-endian systems during scan e1000: Update truesize with the length of the packet for packet split [PATCH] Fix locking in gianfar
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [BRIDGE]: allow full size vlan packets
-
由 Jens Axboe 提交于
Useful for testing. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
We need these for people writing their own ->splice_read/write hooks. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Ayaz Abdulla 提交于
This patch fixes the nic initialization. If the nic was in low power mode, it brings it back to normal power. Also, it utilizes a new hardware reset during the init. I am resending based on feedback, I corrected the register size mapping and delay after posted write. Signed-Off-By: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Update to version 1.2 Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
The sky2_reset function only called from sky2_probe. Maybe the compiler was smart enough to figure this out already. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
The ALIGN() macro in kernel.h does the same math that the sky2 driver was using for padding. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Add an fake NAPI schedule once a second. This is an attempt to work around for broken configurations with edge-triggered interrupts. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
This is a workaround for the case edge-triggered irq's. Several users seem to have broken configurations sharing edge-triggered irq's. To avoid losing IRQ's, reshedule if more work arrives. The changes to netdevice.h are to extract the part that puts device back in list into separate inline. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
-
-
由 Jeff Garzik 提交于
-
由 Stephen Hemminger 提交于
Need to allow for VLAN header when bridging. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jens Axboe 提交于
sys_splice() moves data to/from pipes with a file input/output. sys_vmsplice() moves data to a pipe, with the input being a user address range instead. This uses an approach suggested by Linus, where we can hold partial ranges inside the pages[] map. Hopefully this will be useful for network receive support as well. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Miklos Szeredi 提交于
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
-
由 Miklos Szeredi 提交于
BKL does not protect against races if the task may sleep between checking and setting a value. So move checking of file->private_data near to setting it in fuse_fill_super(). Found by Al Viro. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
-
由 Miklos Szeredi 提交于
A deadlock was possible, when the last reference to the superblock was held due to a background request containing a file reference. Releasing the file would release the vfsmount which in turn would release the superblock. Since sbput_sem is held during the fput() and fuse_put_super() tries to acquire this same semaphore, a deadlock results. The solution is to move the fput() outside the region protected by sbput_sem. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
-
由 Miklos Szeredi 提交于
This reverts 73ce8355 commit. It was wrong, because it didn't take into account the requirement, that iput() for background requests must be performed synchronously with ->put_super(), otherwise active inodes may remain after unmount. The right solution is to keep the sbput_sem and perform iput() within the locked region, but move fput() outside sbput_sem. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
-
由 Jens Axboe 提交于
Make the move_from_pipe() actors return number of bytes processed, then move_from_pipe() can decide more cleverly when to move on to the next buffer. This fixes problems with pipe offset and differing file offset. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Andrew Morton 提交于
Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Auke Kok 提交于
Update skb with the real packet size. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>
-
- 25 4月, 2006 14 次提交
-
-
由 Ivan Kokshaysky 提交于
As it turned out after recent SCSI changes, strncpy() was broken - it mixed up the return values from __stxncpy() in registers $24 and $27. Thanks to Mathieu Chouquet-Stringer for tracking down the problem and providing an excellent test case. Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6-stable: [CIFS] Fix compile error when CONFIG_CIFS_EXPERIMENTAL is undefined
-
由 Patrick McHardy 提交于
The targets don't do the basic verification themselves anymore so the ipt action needs to take care of it. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Mishin 提交于
xt_table->lock should be initialized before xt_replace_table() call, which uses it. This patch removes strict requirement that table should define lock before registering. Signed-off-by: NDmitry Mishin <dim@openvz.org> Signed-off-by: NKirill Korotaev <dev@openvz.org> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The introduction of x_tables broke comefrom debugging, remove it from ip6_tables as well (ip_tables already got removed). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yasuyuki Kozakai 提交于
Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Some (?) non-x86 architectures require 8byte alignment for u_int64_t even when compiled for 32bit, using u_int32_t in compat_xt_counters breaks on these architectures, use u_int64_t for everything but x86. Reported by Andreas Schwab <schwab@suse.de>. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Voegtle 提交于
The backend part is obsoleted, but the target itself is still needed. Signed-off-by: NThomas Voegtle <tv@lio96.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yasuyuki Kozakai 提交于
If nf_ct_l3proto_find_get() fails to get the refcount of nf_ct_l3proto_generic, nf_ct_l3proto_put() will drop the refcount too far. This gets rid of '.me = THIS_MODULE' of nf_ct_l3proto_generic so that nf_ct_l3proto_find_get() doesn't try to get refcount of it. It's OK because its symbol is usable until nf_conntrack.ko is unloaded. This also kills unnecessary NULL pointer check as well. __nf_ct_proto_find() allways returns non-NULL pointer. Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 OGAWA Hirofumi 提交于
__NR_sys_sync_file_range part was lost somewhere... [glibc is already checking __NR_sync_file_range] Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Buesch 提交于
This patch fixes PIO mode on the softmac bcm43xx driver. (A dscape patch will follow). It mainly fixes endianess issues. This patch is tested on PowerPC32 and i386. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
There are some bugs in the current implementation of the SIOCSIWAP wext, for example that when you do it twice and it fails, it may still try another access point for some reason. This patch fixes this by introducing a new flag that tells the association code that the bssid that is in use was fixed by the user and shouldn't be deviated from. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
The original code was doing arithmetics on a little-endian value. Reported by Stelios Koroneos <stelios@stelioscellar.com> Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-