1. 21 7月, 2015 40 次提交
    • F
      net: bcmgenet: Remove excessive PHY reset · 6ac3ce82
      Florian Fainelli 提交于
      We are currently issuing multiple PHY resets during a suspend/resume,
      first during bcmgenet_power_up() which does a hardware reset, then a
      software reset by calling bcmgenet_mii_reset(). This is both unnecessary
      and can take as long as 10ms per MDIO transactions while we re-apply
      workarounds because we do not yet have MDIO interrupts enabled.
      
      phy_resume() takes care of re-apply our workarounds in case we need any,
      and bcmgenet_power_up() does a PHY hardware reset, all of this is more
      than enough to guarantee that the PHY operates correctly.
      
      Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
      Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6ac3ce82
    • D
      Merge branch 'stmmac-cleanup' · 2c1bcaff
      David S. Miller 提交于
      Joachim Eastwood says:
      
      ====================
      stmmac clean up for 4.3 part1
      
      This patch set continues the conversion of the dwmac glue layers
      to more proper platform drivers. The first part of the patch set
      cleans up stmmac_platform a bit. Refactors code from the common
      probe function and exports two functions that will be used in
      the dwmac-* drivers.
      
      Second part converts two simple dwmac-* drivers to have their
      own probe function and use the exported functions. This brings
      us closer to point where stmmac_platform is only a library of
      common functions for the dwmac-* drivers to use.
      
      The plan next is:
       * add probe functions to the rest of the dwmac-* drivers
       * move probe function in stmmac_platform to dwmac-generic
       * remove struct stmmac_of_data and let those drivers
         that actually need match data handle it themselves
       * clean up include/linux/stmmac.h
      
      Note that this patch set has only been tested on lpc18xx so
      testing on other platforms is greatly appreciated.
      
      Previous parts can be found here:
      http://www.spinics.net/lists/netdev/msg328997.html
      http://www.spinics.net/lists/netdev/msg329932.html
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2c1bcaff
    • J
      stmmac: drop custom_* fields from plat_stmmacenet_data · f4c190eb
      Joachim Eastwood 提交于
      Both of these fields are unused and has been unused since they
      were added 3 and 5 years ago. Drop them since they are clearly
      not very useful.
      Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f4c190eb
    • J
      stmmac: add proper probe function to dwmac-meson · 1734befd
      Joachim Eastwood 提交于
      By using a few functions from stmmac_platform we can now create
      a proper probe function in this driver. By doing so we can drop
      the OF match data and simplify the overall driver.
      Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1734befd
    • J
      stmmac: add proper probe function to dwmac-lpc18xx · f4f8dfde
      Joachim Eastwood 提交于
      By using a few functions from stmmac_platform we can now create
      a proper probe function in this driver. By doing so we can drop
      the OF match data and simplify the overall driver.
      Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f4f8dfde
    • J
      stmmac: export probe_config_dt() and get_platform_resources() · 402dae0b
      Joachim Eastwood 提交于
      Export stmmac_probe_config_dt() and stmmac_get_platform_resources()
      so they can be used in the dwmac-* drivers themselves. This will
      allow us to build more flexible and standalone drivers which just
      use stmmac_platform as a library for setup functions.
      Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      402dae0b
    • J
      stmmac: make stmmac_probe_config_dt return the platform data struct · b0003ead
      Joachim Eastwood 提交于
      Since stmmac_probe_config_dt() allocates the platform data structure
      it is cleaner if it just returned this structure directly. This
      function will later be used in the probe function in dwmac-* drivers.
      Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b0003ead
    • J
      stmmac: introduce stmmac_get_platform_resources() · f396cb01
      Joachim Eastwood 提交于
      Refactor all code that deals with platform resources into it's
      own get function. This function will later be used in the probe
      function in dwmac-* drivers.
      Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f396cb01
    • J
      stmmac: clean up platform/of_match data retrieval · 4ed2d8fc
      Joachim Eastwood 提交于
      Refactor code to clearly separate probing non-dt versus dt. In the
      non-dt case platform data must be supplied to probe successfully.
      For dt the platform data structure is created and match data is
      copied into it. Note that support for supplying platform data in
      dt from AUXDATA is dropped as no users in mainline does this.
      
      This change will allow dt dwmac-* drivers to call the config_dt()
      function from probe to create the needed platform data struct and
      retrieve common dt properties.
      Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4ed2d8fc
    • J
      stmmac: use of_device_get_match_data to retrieve of match data · 0dacf3f6
      Joachim Eastwood 提交于
      By using of_device_get_match_data() the code that retrieve
      match data can be simplified quite a bit.
      Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0dacf3f6
    • D
      Merge branch 'tipc-separate-link-and-aggregation' · 7781e5d1
      David S. Miller 提交于
      Jon Maloy says:
      
      ====================
      tipc: separate link and link aggregation layer
      
      This is the first batch of a longer series that has two main objectives:
      
      o Finer lock granularity during message sending and reception,
        especially regarding usage of the node spinlock.
      
      o Better separation between the link layer implementation and the link
        aggregation layer, represented by node.c::struct tipc_node.
      
      Hopefully these changes also make this part of code somewhat easier
      to comprehend and maintain.
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7781e5d1
    • J
      tipc: reduce locking scope during packet reception · d999297c
      Jon Paul Maloy 提交于
      We convert packet/message reception according to the same principle
      we have been using for message sending and timeout handling:
      
      We move the function tipc_rcv() to node.c, hence handling the initial
      packet reception at the link aggregation level. The function grabs
      the node lock, selects the receiving link, and accesses it via a new
      call tipc_link_rcv(). This function appends buffers to the input
      queue for delivery upwards, but it may also append outgoing packets
      to the xmit queue, just as we do during regular message sending. The
      latter will happen when buffers are forwarded from the link backlog,
      or when retransmission is requested.
      
      Upon return of this function, and after having released the node lock,
      tipc_rcv() delivers/tranmsits the contents of those queues, but it may
      also perform actions such as link activation or reset, as indicated by
      the return flags from the link.
      
      This reduces the number of cpu cycles spent inside the node spinlock,
      and reduces contention on that lock.
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d999297c
    • J
      tipc: introduce node contact FSM · 1a20cc25
      Jon Paul Maloy 提交于
      The logics for determining when a node is permitted to establish
      and maintain contact with its peer node becomes non-trivial in the
      presence of multiple parallel links that may come and go independently.
      
      A known failure scenario is that one endpoint registers both its links
      to the peer lost, cleans up it binding table, and prepares for a table
      update once contact is re-establihed, while the other endpoint may
      see its links reset and re-established one by one, hence seeing
      no need to re-synchronize the binding table. To avoid this, a node
      must not allow re-establishing contact until it has confirmation that
      even the peer has lost both links.
      
      Currently, the mechanism for handling this consists of setting and
      resetting two state flags from different locations in the code. This
      solution is hard to understand and maintain. A closer analysis even
      reveals that it is not completely safe.
      
      In this commit we do instead introduce an FSM that keeps track of
      the conditions for when the node can establish and maintain links.
      It has six states and four events, and is strictly based on explicit
      knowledge about the own node's and the peer node's contact states.
      Only events leading to state change are shown as edges in the figure
      below.
      
                                   +--------------+
                                   | SELF_UP/     |
                 +---------------->| PEER_COMING  |-----------------+
          SELF_  |                 +--------------+                 |PEER_
          ESTBL_ |                        |                         |ESTBL_
          CONTACT|      SELF_LOST_CONTACT |                         |CONTACT
                 |                        v                         |
                 |                 +--------------+                 |
                 |      PEER_      | SELF_DOWN/   |     SELF_       |
                 |      LOST_   +--| PEER_LEAVING |<--+ LOST_       v
      +-------------+   CONTACT |  +--------------+   | CONTACT  +-----------+
      | SELF_DOWN/  |<----------+                     +----------| SELF_UP/  |
      | PEER_DOWN   |<----------+                     +----------| PEER_UP   |
      +-------------+   SELF_   |  +--------------+   | PEER_    +-----------+
                 |      LOST_   +--| SELF_LEAVING/|<--+ LOST_       A
                 |      CONTACT    | PEER_DOWN    |     CONTACT     |
                 |                 +--------------+                 |
                 |                         A                        |
          PEER_  |       PEER_LOST_CONTACT |                        |SELF_
          ESTBL_ |                         |                        |ESTBL_
          CONTACT|                 +--------------+                 |CONTACT
                 +---------------->| PEER_UP/     |-----------------+
                                   | SELF_COMING  |
                                   +--------------+
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1a20cc25
    • J
      tipc: move link supervision timer to node level · 8a1577c9
      Jon Paul Maloy 提交于
      In our effort to move control of the links to the link aggregation
      layer, we move the perodic link supervision timer to struct tipc_node.
      The new timer is shared between all links belonging to the node, thus
      saving resources, while still kicking the FSM on both its pertaining
      links at each expiration.
      
      The current link timer and corresponding functions are removed.
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8a1577c9
    • J
      tipc: simplify link timer implementation · 333ef69e
      Jon Paul Maloy 提交于
      We create a second, simpler, link timer function, tipc_link_timeout().
      The new function  makes use of the new FSM function introduced in the
      previous commit, and just like it, takes a buffer queue as parameter.
      It returns an event bit field and potentially a link protocol packet
      to the caller.
      
      The existing timer function, link_timeout(), is still needed for a
      while, so we redesign it to become a wrapper around the new function.
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      333ef69e
    • J
      tipc: improve link FSM implementation · 6ab30f9c
      Jon Paul Maloy 提交于
      The link FSM implementation is currently unnecessarily complex.
      It sometimes checks for conditional state outside the FSM data
      before deciding next state, and often performs actions directly
      inside the FSM logics.
      
      In this commit, we create a second, simpler FSM implementation,
      that as far as possible acts only on states and events that it is
      strictly defined for, and postpone any actions until it is finished
      with its decisions. It also returns an event flag field and an a
      buffer queue which may potentially contain a protocol message to
      be sent by the caller.
      
      Unfortunately, we cannot yet make the FSM "clean", in the sense
      that its decisions are only based on FSM state and event, and that
      state changes happen only here. That will have to wait until the
      activate/reset logics has been cleaned up in a future commit.
      
      We also rename the link states as follows:
      
      WORKING_WORKING -> TIPC_LINK_WORKING
      WORKING_UNKNOWN -> TIPC_LINK_PROBING
      RESET_UNKNOWN   -> TIPC_LINK_RESETTING
      RESET_RESET     -> TIPC_LINK_ESTABLISHING
      
      The existing FSM function, link_state_event(), is still needed for
      a while, so we redesign it to make use of the new function.
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6ab30f9c
    • J
      tipc: introduce new link protocol msg create function · 426cc2b8
      Jon Paul Maloy 提交于
      As a preparation for later changes, we introduce a new function
      tipc_link_build_proto_msg(). Instead of actually sending the created
      protocol message, it only creates it and adds it to the head of a
      skb queue provided by the caller.
      
      Since we still need the existing function tipc_link_protocol_xmit()
      for a while, we redesign it to make use of the new function.
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      426cc2b8
    • J
      tipc: clean up definitions and usage of link flags · d3504c34
      Jon Paul Maloy 提交于
      The status flag LINK_STOPPED is not needed any more, since the
      mechanism for delayed deletion of links has been removed.
      Likewise, LINK_STARTED and LINK_START_EVT are unnecessary,
      because we can just as well start the link timer directly from
      inside tipc_link_create().
      
      We eliminate these flags in this commit.
      
      Instead of the above flags, we now introduce three new link modes,
      TIPC_LINK_OPEN, TIPC_LINK_BLOCKED and TIPC_LINK_TUNNEL. The values
      indicate whether, and in the case of TIPC_LINK_TUNNEL, which, messages
      the link is allowed to receive in this state. TIPC_LINK_BLOCKED also
      blocks timer-driven protocol messages to be sent out, and any change
      to the link FSM. Since the modes are mutually exclusive, we convert
      them to state values, and rename the 'flags' field in struct tipc_link
      to 'exec_mode'.
      
      Finally, we move the #defines for link FSM states and events from link.h
      into enums inside the file link.c, which is the real usage scope of
      these definitions.
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d3504c34
    • J
      tipc: make media xmit call outside node spinlock context · af9b028e
      Jon Paul Maloy 提交于
      Currently, message sending is performed through a deep call chain,
      where the node spinlock is grabbed and held during a significant
      part of the transmission time. This is clearly detrimental to
      overall throughput performance; it would be better if we could send
      the message after the spinlock has been released.
      
      In this commit, we do instead let the call revert on the stack after
      the buffer chain has been added to the transmission queue, whereafter
      clones of the buffers are transmitted to the device layer outside the
      spinlock scope.
      
      As a further step in our effort to separate the roles of the node
      and link entities we also move the function tipc_link_xmit() to
      node.c, and rename it to tipc_node_xmit().
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      af9b028e
    • J
      tipc: change sk_buffer handling in tipc_link_xmit() · 22d85c79
      Jon Paul Maloy 提交于
      When the function tipc_link_xmit() is given a buffer list for
      transmission, it currently consumes the list both when transmission
      is successful and when it fails, except for the special case when
      it encounters link congestion.
      
      This behavior is inconsistent, and needs to be corrected if we want
      to avoid problems in later commits in this series.
      
      In this commit, we change this to let the function consume the list
      only when transmission is successful, and leave the list with the
      sender in all other cases. We also modifiy the socket code so that
      it adapts to this change, i.e., purges the list when a non-congestion
      error code is returned.
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      22d85c79
    • J
      tipc: use bearer index when looking up active links · 36e78a46
      Jon Paul Maloy 提交于
      struct tipc_node currently holds two arrays of link pointers; one,
      indexed by bearer identity, which contains all links irrespective of
      current state, and one two-slot array for the currently active link
      or links. The latter array contains direct pointers into the elements
      of the former. This has the effect that we cannot know the bearer id of
      a link when accessing it via the "active_links[]" array without actually
      dereferencing the pointer, something we want to avoid in some cases.
      
      In this commit, we do instead store the bearer identity in the
      "active_links" array, and use this as an index to find the right element
      in the overall link entry array. This change should be seen as a
      preparation for the later commits in this series.
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      36e78a46
    • J
      tipc: move link input queue to tipc_node · d39bbd44
      Jon Paul Maloy 提交于
      At present, the link input queue and the name distributor receive
      queues are fields aggregated in struct tipc_link. This is a hazard,
      because a link might be deleted while a receiving socket still keeps
      reference to one of the queues.
      
      This commit fixes this bug. However, rather than adding yet another
      reference counter to the critical data path, we move the two queues
      to safe ground inside struct tipc_node, which is already protected, and
      let the link code only handle references to the queues. This is also
      in line with planned later changes in this area.
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d39bbd44
    • J
      tipc: move link creation from neighbor discoverer to node · d3a43b90
      Jon Paul Maloy 提交于
      As a step towards turning links into node internal entities, we move the
      creation of links from the neighbor discovery logics to the node's link
      control logics.
      
      We also create an additional entry for the link's media address in the
      newly introduced struct tipc_link_entry, since this is where it is
      needed in the upcoming commits. The current copy in struct tipc_link
      is kept for now, but will be removed later.
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d3a43b90
    • J
      tipc: introduce link entry structure to struct tipc_node · 9d13ec65
      Jon Paul Maloy 提交于
      struct 'tipc_node' currently contains two arrays for link attributes,
      one for the link pointers, and one for the usable link MTUs.
      
      We now group those into a new struct 'tipc_link_entry', and intoduce
      one single array consisting of such enties. Apart from being a cosmetic
      improvement, this is a starting point for the strict master-slave
      relation between node and link that we will introduce in the following
      commits.
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9d13ec65
    • J
      net: remove skb_frag_add_head · 6acc2326
      Jiri Benc 提交于
      It's not used anywhere.
      Signed-off-by: NJiri Benc <jbenc@redhat.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6acc2326
    • D
      Merge branch 'offload_fwd_mark' · bd265242
      David S. Miller 提交于
      Scott Feldman says:
      
      ====================
      switchdev: avoid duplicate packet forwarding
      
      v3:
      
       - Per Nicolas Dichtel review: remove errant empty union.
      
      v2:
      
       - Per davem review: in sk_buff, union fwd_mark with secmark to save space
         since features appear to be mutually exclusive.
       - Per Simon Horman review:
         - fix grammar in switchdev.txt wrt fwd_mark
         - remove some unrelated changes that snuck in
      
      v1:
      
      This patchset was previously submitted as RFC.  No changes from the last
      version (v2) sent under RFC.  Including RFC version history here for reference.
      
      RFC v2:
      
       - s/fwd_mark/offload_fwd_mark
       - use consume_skb rather than kfree_skb when dropping pkt on egress.
       - Use Jiri's suggestion to use ifindex of one of the ports in a group
         as the mark for all the ports in the group.  This can be done with
         no additional storage (no hashtable from v1).  To pull it off, we
         need some simple recursive routines to walk the netdev tree ensuring
         all leaves in the tree (ports) in the same group (e.g. bridge)
         belonging to the same switch device will have the same offload fwd mark.
         Maybe someone sees a better design for the recusive routines?  They're
         not too bad, and should cover the stacked driver cases.
      
      RFC v1:
      
      With switchdev support for offloading L2/L3 forwarding data path to a
      switch device, we have a general problem where both the device and the
      kernel may forward the packet, resulting in duplicate packets on the wire.
      Anytime a packet is forwarded by the device and a copy is sent to the CPU,
      there is potential for duplicate forwarding, as the kernel may also do a
      forwarding lookup and send the packet on the wire.
      
      The specific problem this patch series is interested in solving is avoiding
      duplicate packets on bridged ports.  There was a previous RFC from Roopa
      (http://marc.info/?l=linux-netdev&m=142687073314252&w=2) to address this
      problem, but didn't solve the problem of mixed ports in the bridge from
      different devices; there was no way to exclude some ports from forwarding
      and include others.  This RFC solves that problem by tagging the ingressing
      packet with a unique mark, and then comparing the packet mark with the
      egress port mark, and skip forwarding when there is a match.  For the mixed
      ports bridge case, only those ports with matching marks are skipped.
      
      The switchdev port driver must do two things:
      
      1) Generate a fwd_mark for each switch port, using some unique key of the
         switch device (and optionally port).  This is done when the port netdev
         is registered or if the port's group membership changes (joins/leaves
         a bridge, for example).
      
      2) On packet ingress from port, mark the skb with the ingress port's
         fwd_mark.  If the device supports it, it's useful to only mark skbs
         which were already forwarded by the device.  If the device does not
         support such indication, all skbs can be marked, even if they're
         local dst.
      
      Two new 32-bit fields are added to struct sk_buff and struct netdevice to
      hold the fwd_mark.  I've wrapped these with CONFIG_NET_SWITCHDEV for now. I
      tried using skb->mark for this purpose, but ebtables can overwrite the
      skb->mark before the bridge gets it, so that will not work.
      
      In general, this fwd_mark can be used for any case where a packet is
      forwarded by the device and a copy is sent to the CPU, to avoid the kernel
      re-forwarding the packet.  sFlow is another use-case that comes to mind,
      but I haven't explored the details.
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bd265242
    • S
    • S
      rocker: add offload_fwd_mark support · 3f98a8e6
      Scott Feldman 提交于
      If device flags ingress packet as "fwd offload", mark the
      skb->offlaod_fwd_mark using the ingress port's dev->offlaod_fwd_mark.  This
      will be the hint to the kernel that this packet has already been forwarded
      by device to egress ports matching skb->offlaod_fwd_mark.
      
      For rocker, derive port dev->offlaod_fwd_mark based on device switch ID and
      port ifindex.  If port is bridged, use the bridge ifindex rather than the
      port ifindex.
      Signed-off-by: NScott Feldman <sfeldma@gmail.com>
      Acked-by: NJiri Pirko <jiri@resnulli.us>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3f98a8e6
    • S
      switchdev: add offload_fwd_mark generator helper · 1a3b2ec9
      Scott Feldman 提交于
      skb->offload_fwd_mark and dev->offload_fwd_mark are 32-bit and should be
      unique for device and may even be unique for a sub-set of ports within
      device, so add switchdev helper function to generate unique marks based on
      port's switch ID and group_ifindex.  group_ifindex would typically be the
      container dev's ifindex, such as the bridge's ifindex.
      
      The generator uses a global hash table to store offload_fwd_marks hashed by
      {switch ID, group_ifindex} key.
      Signed-off-by: NScott Feldman <sfeldma@gmail.com>
      Acked-by: NJiri Pirko <jiri@resnulli.us>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1a3b2ec9
    • S
    • S
      net: don't reforward packets already forwarded by offload device · 0c4f691f
      Scott Feldman 提交于
      Just before queuing skb for xmit on port, check if skb has been marked by
      switchdev port driver as already fordwarded by device.  If so, drop skb.  A
      non-zero skb->offload_fwd_mark field is set by the switchdev port
      driver/device on ingress to indicate the skb has already been forwarded by
      the device to egress ports with matching dev->skb_mark.  The switchdev port
      driver would assign a non-zero dev->offload_skb_mark for each device port
      netdev during registration, for example.
      Signed-off-by: NScott Feldman <sfeldma@gmail.com>
      Acked-by: NJiri Pirko <jiri@resnulli.us>
      Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
      Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0c4f691f
    • S
      rocker: forward packets to CPU when port is joined to openvswitch · 8254973f
      Simon Horman 提交于
      Teach rocker to forward packets to CPU when a port is joined to Open vSwitch.
      There is scope to later refine what is passed up as per Open vSwitch flows
      on a port.
      
      This does not change the behaviour of rocker ports that are
      not joined to Open vSwitch.
      Signed-off-by: NSimon Horman <simon.horman@netronome.com>
      Acked-by: NScott Feldman <sfeldma@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8254973f
    • N
      bridge: mcast: fix br_multicast_dev_del warn when igmp snooping is not defined · a7ce45a7
      Nikolay Aleksandrov 提交于
      Fix:
      net/bridge/br_if.c: In function 'br_dev_delete':
      >> net/bridge/br_if.c:284:2: error: implicit declaration of function
      >> 'br_multicast_dev_del' [-Werror=implicit-function-declaration]
           br_multicast_dev_del(br);
           ^
         cc1: some warnings being treated as errors
      
      when igmp snooping is not defined.
      Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a7ce45a7
    • P
      net/ipv6: update flowi6_oif in ip6_dst_lookup_flow if not set · a0a9f33b
      Phil Sutter 提交于
      Newly created flows don't have flowi6_oif set (at least if the
      associated socket is not interface-bound). This leads to a mismatch in
      __xfrm6_selector_match() for policies which specify an interface in the
      selector (sel->ifindex != 0).
      
      Backtracing shows this happens in code-paths originating from e.g.
      ip6_datagram_connect(), rawv6_sendmsg() or tcp_v6_connect(). (UDP was
      not tested for.)
      
      In summary, this patch fixes policy matching on outgoing interface for
      locally generated packets.
      Signed-off-by: NPhil Sutter <phil@nwl.cc>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a0a9f33b
    • N
      bonding: trivial: remove unused variables · 22f94e62
      Nikolay Aleksandrov 提交于
      Get rid of these:
      drivers/net/bonding//bond_main.c: In function ‘bond_update_slave_arr’:
      drivers/net/bonding//bond_main.c:3754:6: warning: variable
      ‘slaves_in_agg’ set but not used [-Wunused-but-set-variable]
        int slaves_in_agg;
            ^
        CC [M]  drivers/net/bonding//bond_3ad.o
      drivers/net/bonding//bond_3ad.c: In function
      ‘ad_marker_response_received’:
      drivers/net/bonding//bond_3ad.c:1870:61: warning: parameter ‘marker’
      set but not used [-Wunused-but-set-parameter]
       static void ad_marker_response_received(struct bond_marker *marker,
                                                                   ^
      drivers/net/bonding//bond_3ad.c:1871:19: warning: parameter ‘port’ set
      but not used [-Wunused-but-set-parameter]
            struct port *port)
                         ^
      Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      22f94e62
    • D
      Merge branch 'bridge-temp-and-perm' · 5b1d0d8f
      David S. Miller 提交于
      Nikolay Aleksandrov says:
      
      ====================
      bridge: multicast: temp and perm entries behaviour enhancements
      
      Patch 01 adds a notify when a group is deleted via br_multicast_del_pg()
      (on expire, on device delete or on device down).
      Patch 02 changes how bridge device and bridge port delete and down/up are
      handled. Until now on bridge down all groups were flushed, now only the
      temp ones are (same for port), perm entries are flushed only on port or
      bridge removal.
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5b1d0d8f
    • S
      bridge: multicast: fix handling of temp and perm entries · e10177ab
      Satish Ashok 提交于
      When the bridge (or port) is brought down/up flush only temp entries and
      leave the perm ones. Flush perm entries only when deleting the bridge
      device or the associated port.
      Signed-off-by: NSatish Ashok <sashok@cumulusnetworks.com>
      Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e10177ab
    • N
      bridge: multicast: notify on group delete · ef8299de
      Nikolay Aleksandrov 提交于
      Group notifications were not sent when a group expired or was deleted
      due to bridge/port device being deleted. So add br_mdb_notify() to
      br_multicast_del_pg().
      Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ef8299de
    • D
      Merge branch 'bpf_cgroup_classid' · 03b6dc7d
      David S. Miller 提交于
      Daniel Borkmann says:
      
      ====================
      BPF update
      
      This small helper allows for accessing net_cls cgroups classid. Please
      see individual patches for more details.
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      03b6dc7d
    • D
      ebpf: add helper to retrieve net_cls's classid cookie · 8d20aabe
      Daniel Borkmann 提交于
      It would be very useful to retrieve the net_cls's classid from an eBPF
      program to allow for a more fine-grained classification, it could be
      directly used or in conjunction with additional policies. I.e. docker,
      but also tooling such as cgexec, can easily run applications via net_cls
      cgroups:
      
        cgcreate -g net_cls:/foo
        echo 42 > foo/net_cls.classid
        cgexec -g net_cls:foo <prog>
      
      Thus, their respecitve classid cookie of foo can then be looked up on
      the egress path to apply further policies. The helper is desigend such
      that a non-zero value returns the cgroup id.
      Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      Cc: Thomas Graf <tgraf@suug.ch>
      Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8d20aabe