Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NChristian Lamparter <chunkeey@web.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch adds a new device to ar9170usb.
Reported-by: NMike Kershaw/Dragorn <dragorn@kismetwireless.net>
Signed-off-by: NChristian Lamparter <chunkeey@web.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Code was clearly wrong, plus callers expect the mode change to happen as
soon as possible, not dropped on the floor until the next time some
other config value changes and a commit happens.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Add USB device ID for OQO 01+'s internal wireless LAN

An OQO employee mentions the chip's true identity here:-
    ftp://ftp.oqo.com/unsupported/linux/OQOLinux.htmlSigned-off-by: NJamie Lentin <jm@lentin.co.uk>
Acked-by: NKalle Valo <kalle.valo@iki.fi>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Don't lead memory when receive errors
Signed-off-by: NPhilip Rakity <prakity@yahoo.com>
Acked-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Wext makes no assumptions about the contents of
data->txpower.fixed and data->txpower.value when
data->txpower.disabled is set, so do not update
the user-requested power level while disabling.

Also, when wext configures a really _fixed_ power
output [1], we should reject it instead of limiting it
to the regulatory constraint. If the user wants to set
a _limit_ [2] then we should honour that.

[1] iwconfig wlan0 txpower 20dBm fixed
[2] iwconfig wlan0 txpower 10dBm

This fixes
http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1942Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch fixes the bug that the driver tries to continue to
connect(associate) to AP even if gelic_wl_do_{wpa,wep}_setup() fails,
Signed-off-by: NMasakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch fixes the following waring:
> ------------[ cut here ]------------
>WARNING: at kernel/softirq.c:138 local_bh_enable+0x54/0xbc()
>Modules linked in: p54spi
>[<c0034ff8>] (dump_stack+0x0/0x14)
>[<c005b1a4>] (warn_on_slowpath+0x0/0x68)
>[<c00604c8>] (local_bh_enable+0x0/0xbc)
>[<bf000000>] (p54spi_op_tx+0x0/0x4c [p54spi])
>[<c01a4d34>] (p54_sta_unlock+0x0/0x78)

p54spi_op_tx needs to be called from different locking contexts.
Therefore we have to protect the linked list with irqsave spinlocks.
Reported-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChristian Lamparter <chunkeey@web.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

I'm very sorry, as this change belongs to the other patch:
"[PATCH] p54: fix SoftLED compile dependencies".
however I must have somehow lost "git add" for that file.
Signed-off-by: NChristian Lamparter <chunkeey@web.de>
Acked-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The RX buffer poison needs to be refreshed, if we recycle an RX buffer,
because it might be (partially) overwritten by some DMA operations.

Cc: stable@kernel.org
Cc: Francesco Gringoli <francesco.gringoli@ing.unibs.it>
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch adds poisoning and sanity checking to the RX DMA buffers.
This is used for protection against buggy hardware/firmware that raises
RX interrupts without doing an actual DMA transfer.

This mechanism protects against rare "bad packets" (due to uninitialized skb data)
and rare kernel crashes due to uninitialized RX headers.

The poison is selected to not match on valid frames and to be cheap for checking.

The poison check mechanism _might_ trigger incorrectly, if we are voluntarily
receiving frames with bad PLCP headers. However, this is nonfatal, because the
chance of such a match is basically zero and in case it happens it just results
in dropping the packet.
Bad-PLCP RX defaults to off, and you should leave it off unless you want to listen
to the latest news broadcasted by your microwave oven.

This patch also moves the initialization of the RX-header "length" field in front of
the mapping of the DMA buffer. The CPU should not touch the buffer after we mapped it.

Cc: stable@kernel.org
Reported-by: NFrancesco Gringoli <francesco.gringoli@ing.unibs.it>
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Currently rx status for frames which are completed from reorder buffer
is taken from it's cb area which is not always right, cb is not holding
the rx status when driver uses mac80211's non-irq rx handler to pass it's
received frames. This results in dropping almost all frames from reorder
buffer when security is enabled by doing double decryption (first in hw,
second in sw because of wrong rx status). This patch copies rx status into
cb area before the frame is put into reorder buffer. After this patch,
there is a significant improvement in throughput with ath9k + WPA2(AES).
Signed-off-by: NVasanthakumar Thiagarajan <vasanth@atheros.com>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: stable@kernel.org
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

We won't ever get here as regulatory_hint_core() can only fail
on -ENOMEM and in that case we don't initialize cfg80211 but this is
technically correct code.

This is actually good for stable, where we don't check for -ENOMEM
failure on __regulatory_hint()'s failure.

Cc: stable@kernel.org
Reported-by: NQuentin Armitage <Quentin@armitage.org.uk>
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The commit a390d1f3 ("phylib: convert state_queue work to
delayed_work") missed converting 'expires' value to 'delay' value.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prevent ixgbe from putting the adapter into D3 during shutdown except when
we're going to power off the system, since doing that may generally cause
problems with kexec to happen (such problems were observed for igb and
forcedeth).  For this purpose seperate ixgbe_shutdown() from ixgbe_suspend()
and use the appropriate PCI PM callbacks in both of them.
Signed-off-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prevent e1000e from putting the adapter into D3 during shutdown except when
we're going to power off the system, since doing that may generally cause
problems with kexec to happen (such problems were observed for igb and
forcedeth).  For this purpose seperate e1000e_shutdown() from e1000e_suspend()
and use the appropriate PCI PM callbacks in both of them.
Signed-off-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prevent e1000 from putting the adapter into D3 during shutdown except when
we're going to power off the system, since doing that may generally cause
problems with kexec to happen (such problems were observed for igb and
forcedeth).  For this purpose seperate e1000_shutdown() from e1000_suspend()
and use the appropriate PCI PM callbacks in both of them.
Signed-off-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Latest tcpdump/libpcap triggers annoying messages because of high order page
allocation failures (when lowmem exhausted or fragmented)

These allocation errors are correctly handled so could be silent.

[22660.208901] tcpdump: page allocation failure. order:5, mode:0xc0d0
[22660.208921] Pid: 13866, comm: tcpdump Not tainted 2.6.30-rc2 #170
[22660.208936] Call Trace:
[22660.208950]  [<c04e2b46>] ? printk+0x18/0x1a
[22660.208965]  [<c02760f7>] __alloc_pages_internal+0x357/0x460
[22660.208980]  [<c0276251>] __get_free_pages+0x21/0x40
[22660.208995]  [<c04cc835>] packet_set_ring+0x105/0x3d0
[22660.209009]  [<c04ccd1d>] packet_setsockopt+0x21d/0x4d0
[22660.209025]  [<c0270400>] ? filemap_fault+0x0/0x450
[22660.209040]  [<c0449e34>] sys_setsockopt+0x54/0xa0
[22660.209053]  [<c044b97f>] sys_socketcall+0xef/0x270
[22660.209067]  [<c0202e34>] sysenter_do_call+0x12/0x26
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After a transmit timed out, the reset task will be called, which will free the
allocated resources(stop_gfar). If gfar_poll will be called before the
resources get allocated again gfar_clean_tx_ring will call
dev_kfree_skb_any(NULL).

Example crash:

ops: Kernel access of bad area, sig: 11 [#1]
PREEMPT RSBBA100
Modules linked in:
NIP: c01a10c4 LR: c013b254 CTR: c013c038
REGS: c02e7d20 TRAP: 0300   Not tainted  (2.6.27.20)
MSR: 00001032 <ME,IR,DR>  CR: 24000082  XER: 20000000
DAR: 000000a0, DSISR: 20000000
TASK = c02ce578[0] 'swapper' THREAD: c02e6000
GPR00: 000000a0 c02e7dd0 c02ce578 00000000 00000040 00000001 c02ec1c0 
00001032
GPR08: c080d1e0 df9ea800 00000000 00000000 24000082 ffffffff 0404f000 
00000000
GPR16: ffffffbf ffffffff ffffffff ffdff7ff ffffffff c02d0fd4 00100100 
00200200
GPR24: c031220c 00000001 00000001 00000000 00000000 df849800 ff109000 
df849b80
NIP [c01a10c4] dev_kfree_skb_irq+0x18/0x70
LR [c013b254] gfar_clean_tx_ring+0x70/0x11c
Call Trace:
[c02e7dd0] [c003e978] update_wall_time+0x730/0x744 (unreliable)
[c02e7df0] [c013b254] gfar_clean_tx_ring+0x70/0x11c
[c02e7e10] [c013c07c] gfar_poll+0x44/0x150
[c02e7e30] [c01a064c] net_rx_action+0xa8/0x19c
[c02e7e70] [c00251d4] __do_softirq+0x64/0xc0
[c02e7e90] [c0006384] do_softirq+0x40/0x58
[c02e7ea0] [c00250a8] irq_exit+0x40/0x9c
[c02e7eb0] [c000642c] do_IRQ+0x90/0xac
[c02e7ec0] [c0010ab4] ret_from_except+0x0/0x14
--- Exception: 501 at cpu_idle+0x9c/0xf8
    LR = cpu_idle+0x9c/0xf8
[c02e7f80] [c0009820] cpu_idle+0x58/0xf8 (unreliable)
[c02e7fa0] [c01fb8c8] __got2_end+0x7c/0x90
[c02e7fc0] [c026c794] start_kernel+0x2c0/0x2d4
[c02e7ff0] [00003438] 0x3438
Instruction dump:
7fa00124 80010024 bba10014 38210020 7c0803a6 4e800020 9421ffe0 7c0802a6
7c6b1b78 90010024 380300a0 bfa10014 <7d200028> 3129ffff 7d20012d 40a2fff4
Kernel panic - not syncing: Fatal exception in interrupt

This Patch calls netif_stop_queue before calling stop_gfar.
Signed-off-by: NMarkus Brunner <super.firetwister@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add LRO alignment initially committed in
621544eb ("[LRO]: fix lro_gen_skb()
alignment") and removed in 0dcffac1
("myri10ge: add multislices support") during conversion to
multi-slice.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the update of real_num_tx_queues from
ixgbe_acquire_msix_vectors() to ixgbe_set_num_queues(), to ensure it
be always in sync with num_tx_queues.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't do the num_tx_queues based masking on calculating tx queue
index.

 1) num_tx_queues is not always power-of-2, because it also depends on
    the online cpu numbers. So the masking could be a performance bug
    on a 6 cpu system.
 2) queue_mapping will be limited by real_num_tx_queues=num_tx_queues
    in the generic netdev function set_cur_queue_map(). So the bound
    limiting here is not necessary.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 244f46ae.

Alan Cox did the research, and just like the other radio protocols
zero-length frames have meaning because at the top level ROSE is
X.25 PLP.

So this zero-length filtering is invalid.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

falcon_sim_phy_event() used EFX_OWORD_FIELD, which operates on
bitfields in 128-bit values, on an event, which is a 64-bit value.
This should be harmless - these macros always use little-endian
ordering, so it would read and write back the following 8 bytes
unchanged - but it is obviously wrong.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sfc could call netif_napi_add() multiple times for the same
napi_struct, corrupting the list of napi_structs for the associated
device and leading to a busy-loop on device removal.  Move the call to
netif_napi_add() and add a call to netif_napi_del() in the obvious
places.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

	Remove debug printk I accidently left in as part of commit:

commit 6146b1a4
Author: Jay Vosburgh <fubar@us.ibm.com>
Date:   Tue Nov 4 17:51:15 2008 -0800

    bonding: Fix ALB mode to balance traffic on VLANs

	Reported by Duncan Gibb <duncan.gibb@siriusit.co.uk>
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

e1000/e1000e compile report a possible unused variable, fix
that for now.  Shortly after this a small refactor and bug
fix will follow in the same code.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reported-by: NSubrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The BUG_ON(skge->tx_ring.to_use != skge->tx_ring.to_clean) in skge_up()
was sometimes observed when setting MTU.

skge_down() disables the TX queue, but then reenables it by mistake via
skge_tx_clean().
Fix it by moving the waking of the queue from skge_tx_clean() to the
other caller. And to make sure start_xmit is not in progress on another
CPU, skge_down() should call netif_tx_disable().

The bug was reported to me by Jiri Jilek whose Debian system sometimes
failed to boot. He tested the patch and the bug did not happen anymore.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Acked-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since everybody has been focusing on baremetal GRO performance
no one noticed when I added a bug that zapped gso_size for all
GRO packets.  This only gets picked up when you forward the skb
out of an interface.

Thanks to Mark Wagner for noticing this bug when testing kvm.
Reported-by: NMark Wagner <mwagner@redhat.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After switch (rthdr->type) {...},the check below is completely useless.Because:
if the type is 2,then hdrlen must be 2 and segments_left must be 1,clearly the
check is redundant;if the type is not 2,then goto sticky_done,the check is useless
too.
Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: NShan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When I made the tun driver use non-linear packets as the preferred
option, it broke non-GSO users because they would end up allocating
a completely non-linear packet, which triggers a crash when we call
eth_type_trans.

This patch reverts non-GSO users to using linear packets and adds
a check to ensure that GSO users can't cause crashes in the same
way.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A long-standing feature in tcp_init_metrics() is such that
any of its goto reset prevents call to tcp_init_cwnd().
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>