Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 163
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 08 10月, 2019 23 次提交
  3. 05 10月, 2019 17 次提交
    • G
      Linux 4.19.77 · 6cad9d0c
      由 Greg Kroah-Hartman 提交于
      6cad9d0c
    • K
      drm/amd/display: Restore backlight brightness after system resume · 2c60da90
      由 Kai-Heng Feng 提交于 
      commit bb264220d9316f6bd7c1fd84b8da398c93912931 upstream.

Laptops with AMD APU doesn't restore display backlight brightness after
system resume.

This issue started when DC was introduced.

Let's use BL_CORE_SUSPENDRESUME so the backlight core calls
update_status callback after system resume to restore the backlight
level.

Tested on Dell Inspiron 3180 (Stoney Ridge) and Dell Latitude 5495
(Raven Ridge).

Cc: <stable@vger.kernel.org>
Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2c60da90
    • Y
      mm/compaction.c: clear total_{migrate,free}_scanned before scanning a new zone · 4d8bdf7f
      由 Yafang Shao 提交于 
      [ Upstream commit a94b525241c0fff3598809131d7cfcfe1d572d8c ]

total_{migrate,free}_scanned will be added to COMPACTMIGRATE_SCANNED and
COMPACTFREE_SCANNED in compact_zone().  We should clear them before
scanning a new zone.  In the proc triggered compaction, we forgot clearing
them.

[laoar.shao@gmail.com: introduce a helper compact_zone_counters_init()]
  Link: http://lkml.kernel.org/r/1563869295-25748-1-git-send-email-laoar.shao@gmail.com
[akpm@linux-foundation.org: expand compact_zone_counters_init() into its single callsite, per mhocko]
[vbabka@suse.cz: squash compact_zone() list_head init as well]
  Link: http://lkml.kernel.org/r/1fb6f7da-f776-9e42-22f8-bbb79b030b98@suse.cz
[akpm@linux-foundation.org: kcompactd_do_work(): avoid unnecessary initialization of cc.zone]
Link: http://lkml.kernel.org/r/1563789275-9639-1-git-send-email-laoar.shao@gmail.com
Fixes: 7f354a54 ("mm, compaction: add vmstats for kcompactd work")
Signed-off-by: NYafang Shao <laoar.shao@gmail.com>
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Yafang Shao <shaoyafang@didiglobal.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      4d8bdf7f
    • E
      fuse: fix deadlock with aio poll and fuse_iqueue::waitq.lock · 5bead06b
      由 Eric Biggers 提交于 
      [ Upstream commit 76e43c8ccaa35c30d5df853013561145a0f750a5 ]

When IOCB_CMD_POLL is used on the FUSE device, aio_poll() disables IRQs
and takes kioctx::ctx_lock, then fuse_iqueue::waitq.lock.

This may have to wait for fuse_iqueue::waitq.lock to be released by one
of many places that take it with IRQs enabled.  Since the IRQ handler
may take kioctx::ctx_lock, lockdep reports that a deadlock is possible.

Fix it by protecting the state of struct fuse_iqueue with a separate
spinlock, and only accessing fuse_iqueue::waitq using the versions of
the waitqueue functions which do IRQ-safe locking internally.

Reproducer:

	#include <fcntl.h>
	#include <stdio.h>
	#include <sys/mount.h>
	#include <sys/stat.h>
	#include <sys/syscall.h>
	#include <unistd.h>
	#include <linux/aio_abi.h>

	int main()
	{
		char opts[128];
		int fd = open("/dev/fuse", O_RDWR);
		aio_context_t ctx = 0;
		struct iocb cb = { .aio_lio_opcode = IOCB_CMD_POLL, .aio_fildes = fd };
		struct iocb *cbp = &cb;

		sprintf(opts, "fd=%d,rootmode=040000,user_id=0,group_id=0", fd);
		mkdir("mnt", 0700);
		mount("foo",  "mnt", "fuse", 0, opts);
		syscall(__NR_io_setup, 1, &ctx);
		syscall(__NR_io_submit, ctx, 1, &cbp);
	}

Beginning of lockdep output:

	=====================================================
	WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
	5.3.0-rc5 #9 Not tainted
	-----------------------------------------------------
	syz_fuse/135 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
	000000003590ceda (&fiq->waitq){+.+.}, at: spin_lock include/linux/spinlock.h:338 [inline]
	000000003590ceda (&fiq->waitq){+.+.}, at: aio_poll fs/aio.c:1751 [inline]
	000000003590ceda (&fiq->waitq){+.+.}, at: __io_submit_one.constprop.0+0x203/0x5b0 fs/aio.c:1825

	and this task is already holding:
	0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: spin_lock_irq include/linux/spinlock.h:363 [inline]
	0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: aio_poll fs/aio.c:1749 [inline]
	0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: __io_submit_one.constprop.0+0x1f4/0x5b0 fs/aio.c:1825
	which would create a new lock dependency:
	 (&(&ctx->ctx_lock)->rlock){..-.} -> (&fiq->waitq){+.+.}

	but this new dependency connects a SOFTIRQ-irq-safe lock:
	 (&(&ctx->ctx_lock)->rlock){..-.}

	[...]

Reported-by: syzbot+af05535bb79520f95431@syzkaller.appspotmail.com
Reported-by: syzbot+d86c4426a01f60feddc7@syzkaller.appspotmail.com
Fixes: bfe4037e ("aio: implement IOCB_CMD_POLL")
Cc: <stable@vger.kernel.org> # v4.19+
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5bead06b
    • N
      md/raid0: avoid RAID0 data corruption due to layout confusion. · bbe3e205
      由 NeilBrown 提交于 
      [ Upstream commit c84a1372df929033cb1a0441fb57bd3932f39ac9 ]

If the drives in a RAID0 are not all the same size, the array is
divided into zones.
The first zone covers all drives, to the size of the smallest.
The second zone covers all drives larger than the smallest, up to
the size of the second smallest - etc.

A change in Linux 3.14 unintentionally changed the layout for the
second and subsequent zones.  All the correct data is still stored, but
each chunk may be assigned to a different device than in pre-3.14 kernels.
This can lead to data corruption.

It is not possible to determine what layout to use - it depends which
kernel the data was written by.
So we add a module parameter to allow the old (0) or new (1) layout to be
specified, and refused to assemble an affected array if that parameter is
not set.

Fixes: 20d0189b ("block: Introduce new bio_split()")
cc: stable@vger.kernel.org (3.14+)
Acked-by: NGuoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      bbe3e205
    • P
      CIFS: Fix oplock handling for SMB 2.1+ protocols · 4290a9e5
      由 Pavel Shilovsky 提交于 
      commit a016e2794fc3a245a91946038dd8f34d65e53cc3 upstream.

There may be situations when a server negotiates SMB 2.1
protocol version or higher but responds to a CREATE request
with an oplock rather than a lease.

Currently the client doesn't handle such a case correctly:
when another CREATE comes in the server sends an oplock
break to the initial CREATE and the client doesn't send
an ack back due to a wrong caching level being set (READ
instead of RWH). Missing an oplock break ack makes the
server wait until the break times out which dramatically
increases the latency of the second CREATE.

Fix this by properly detecting oplocks when using SMB 2.1
protocol version and higher.

Cc: <stable@vger.kernel.org>
Signed-off-by: NPavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4290a9e5
    • M
      CIFS: fix max ea value size · a3a15089
      由 Murphy Zhou 提交于 
      commit 63d37fb4ce5ae7bf1e58f906d1bf25f036fe79b2 upstream.

It should not be larger then the slab max buf size. If user
specifies a larger size, it passes this check and goes
straightly to SMB2_set_info_init performing an insecure memcpy.
Signed-off-by: NMurphy Zhou <jencce.kernel@gmail.com>
Reviewed-by: NAurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a3a15089
    • C
      i2c: riic: Clear NACK in tend isr · a0f7fd38
      由 Chris Brandt 提交于 
      commit a71e2ac1f32097fbb2beab098687a7a95c84543e upstream.

The NACKF flag should be cleared in INTRIICNAKI interrupt processing as
description in HW manual.

This issue shows up quickly when PREEMPT_RT is applied and a device is
probed that is not plugged in (like a touchscreen controller). The result
is endless interrupts that halt system boot.

Fixes: 310c18a4 ("i2c: riic: add driver")
Cc: stable@vger.kernel.org
Reported-by: NChien Nguyen <chien.nguyen.eb@rvc.renesas.com>
Signed-off-by: NChris Brandt <chris.brandt@renesas.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a0f7fd38
    • L
      hwrng: core - don't wait on add_early_randomness() · fec38267
      由 Laurent Vivier 提交于 
      commit 78887832e76541f77169a24ac238fccb51059b63 upstream.

add_early_randomness() is called by hwrng_register() when the
hardware is added. If this hardware and its module are present
at boot, and if there is no data available the boot hangs until
data are available and can't be interrupted.

For instance, in the case of virtio-rng, in some cases the host can be
not able to provide enough entropy for all the guests.

We can have two easy ways to reproduce the problem but they rely on
misconfiguration of the hypervisor or the egd daemon:

- if virtio-rng device is configured to connect to the egd daemon of the
host but when the virtio-rng driver asks for data the daemon is not
connected,

- if virtio-rng device is configured to connect to the egd daemon of the
host but the egd daemon doesn't provide data.

The guest kernel will hang at boot until the virtio-rng driver provides
enough data.

To avoid that, call rng_get_data() in non-blocking mode (wait=0)
from add_early_randomness().
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Fixes: d9e79726 ("hwrng: add randomness to system from rng...")
Cc: <stable@vger.kernel.org>
Reviewed-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      fec38267
    • C
      quota: fix wrong condition in is_quota_modification() · 06098609
      由 Chao Yu 提交于 
      commit 6565c182094f69e4ffdece337d395eb7ec760efc upstream.

Quoted from
commit 3da40c7b ("ext4: only call ext4_truncate when size <= isize")

" At LSF we decided that if we truncate up from isize we shouldn't trim
  fallocated blocks that were fallocated with KEEP_SIZE and are past the
 new i_size.  This patch fixes ext4 to do this. "

And generic/092 of fstest have covered this case for long time, however
is_quota_modification() didn't adjust based on that rule, so that in
below condition, we will lose to quota block change:
- fallocate blocks beyond EOF
- remount
- truncate(file_path, file_size)

Fix it.

Link: https://lore.kernel.org/r/20190911093650.35329-1-yuchao0@huawei.com
Fixes: 3da40c7b ("ext4: only call ext4_truncate when size <= isize")
CC: stable@vger.kernel.org
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      06098609
    • T
      ext4: fix punch hole for inline_data file systems · 091c754d
      由 Theodore Ts'o 提交于 
      commit c1e8220bd316d8ae8e524df39534b8a412a45d5e upstream.

If a program attempts to punch a hole on an inline data file, we need
to convert it to a normal file first.

This was detected using ext4/032 using the adv configuration.  Simple
reproducer:

mke2fs -Fq -t ext4 -O inline_data /dev/vdc
mount /vdc
echo "" > /vdc/testfile
xfs_io -c 'truncate 33554432' /vdc/testfile
xfs_io -c 'fpunch 0 1048576' /vdc/testfile
umount /vdc
e2fsck -fy /dev/vdc

Cc: stable@vger.kernel.org
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      091c754d
    • R
      ext4: fix warning inside ext4_convert_unwritten_extents_endio · 775e3e73
      由 Rakesh Pandit 提交于 
      commit e3d550c2c4f2f3dba469bc3c4b83d9332b4e99e1 upstream.

Really enable warning when CONFIG_EXT4_DEBUG is set and fix missing
first argument.  This was introduced in commit ff95ec22 ("ext4:
add warning to ext4_convert_unwritten_extents_endio") and splitting
extents inside endio would trigger it.

Fixes: ff95ec22 ("ext4: add warning to ext4_convert_unwritten_extents_endio")
Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      775e3e73
    • T
      /dev/mem: Bail out upon SIGKILL. · caa6926d
      由 Tetsuo Handa 提交于 
      commit 8619e5bdeee8b2c685d686281f2d2a6017c4bc15 upstream.

syzbot found that a thread can stall for minutes inside read_mem() or
write_mem() after that thread was killed by SIGKILL [1]. Reading from
iomem areas of /dev/mem can be slow, depending on the hardware.
While reading 2GB at one read() is legal, delaying termination of killed
thread for minutes is bad. Thus, allow reading/writing /dev/mem and
/dev/kmem to be preemptible and killable.

  [ 1335.912419][T20577] read_mem: sz=4096 count=2134565632
  [ 1335.943194][T20577] read_mem: sz=4096 count=2134561536
  [ 1335.978280][T20577] read_mem: sz=4096 count=2134557440
  [ 1336.011147][T20577] read_mem: sz=4096 count=2134553344
  [ 1336.041897][T20577] read_mem: sz=4096 count=2134549248

Theoretically, reading/writing /dev/mem and /dev/kmem can become
"interruptible". But this patch chose "killable". Future patch will make
them "interruptible" so that we can revert to "killable" if some program
regressed.

[1] https://syzkaller.appspot.com/bug?id=a0e3436829698d5824231251fad9d8e998f94f5eSigned-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@vger.kernel.org>
Reported-by: Nsyzbot <syzbot+8ab2d0f39fb79fe6ca40@syzkaller.appspotmail.com>
Link: https://lore.kernel.org/r/1566825205-10703-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      caa6926d
    • D
      cfg80211: Purge frame registrations on iftype change · bd3a11af
      由 Denis Kenzior 提交于 
      commit c1d3ad84eae35414b6b334790048406bd6301b12 upstream.

Currently frame registrations are not purged, even when changing the
interface type.  This can lead to potentially weird situations where
frames possibly not allowed on a given interface type remain registered
due to the type switching happening after registration.

The kernel currently relies on userspace apps to actually purge the
registrations themselves, this is not something that the kernel should
rely on.

Add a call to cfg80211_mlme_purge_registrations() to forcefully remove
any registrations left over prior to switching the iftype.

Cc: stable@vger.kernel.org
Signed-off-by: NDenis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20190828211110.15005-1-denkenz@gmail.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bd3a11af
    • N
      md: only call set_in_sync() when it is expected to succeed. · 5dc86e95
      由 NeilBrown 提交于 
      commit 480523feae581ab714ba6610388a3b4619a2f695 upstream.

Since commit 4ad23a97 ("MD: use per-cpu counter for
writes_pending"), set_in_sync() is substantially more expensive: it
can wait for a full RCU grace period which can be 10s of milliseconds.

So we should only call it when the cost is justified.

md_check_recovery() currently calls set_in_sync() every time it finds
anything to do (on non-external active arrays).  For an array
performing resync or recovery, this will be quite often.
Each call will introduce a delay to the md thread, which can noticeable
affect IO submission latency.

In md_check_recovery() we only need to call set_in_sync() if
'safemode' was non-zero at entry, meaning that there has been not
recent IO.  So we save this "safemode was nonzero" state, and only
call set_in_sync() if it was non-zero.

This measurably reduces mean and maximum IO submission latency during
resync/recovery.
Reported-and-tested-by: NJack Wang <jinpu.wang@cloud.ionos.com>
Fixes: 4ad23a97 ("MD: use per-cpu counter for writes_pending")
Cc: stable@vger.kernel.org (v4.12+)
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5dc86e95
    • N
      md: don't report active array_state until after revalidate_disk() completes. · 598a2cda
      由 NeilBrown 提交于 
      commit 9d4b45d6af442237560d0bb5502a012baa5234b7 upstream.

Until revalidate_disk() has completed, the size of a new md array will
appear to be zero.
So we shouldn't report, through array_state, that the array is active
until that time.
udev rules check array_state to see if the array is ready.  As soon as
it appear to be zero, fsck can be run.  If it find the size to be
zero, it will fail.

So add a new flag to provide an interlock between do_md_run() and
array_state_show().  This flag is set while do_md_run() is active and
it prevents array_state_show() from reporting that the array is
active.

Before do_md_run() is called, ->pers will be NULL so array is
definitely not active.
After do_md_run() is called, revalidate_disk() will have run and the
array will be completely ready.

We also move various sysfs_notify*() calls out of md_run() into
do_md_run() after MD_NOT_READY is cleared.  This ensure the
information is ready before the notification is sent.

Prior to v4.12, array_state_show() was called with the
mddev->reconfig_mutex held, which provided exclusion with do_md_run().

Note that MD_NOT_READY cleared twice.  This is deliberate to cover
both success and error paths with minimal noise.

Fixes: b7b17c9b ("md: remove mddev_lock() from md_attr_show()")
Cc: stable@vger.kernel.org (v4.12++)
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      598a2cda
    • X
      md/raid6: Set R5_ReadError when there is read failure on parity disk · e8323e0d
      由 Xiao Ni 提交于 
      commit 143f6e733b73051cd22dcb80951c6c929da413ce upstream.

7471fb77 ("md/raid6: Fix anomily when recovering a single device in
RAID6.") avoids rereading P when it can be computed from other members.
However, this misses the chance to re-write the right data to P. This
patch sets R5_ReadError if the re-read fails.

Also, when re-read is skipped, we also missed the chance to reset
rdev->read_errors to 0. It can fail the disk when there are many read
errors on P member disk (other disks don't have read error)

V2: upper layer read request don't read parity/Q data. So there is no
need to consider such situation.

This is Reported-by: kbuild test robot <lkp@intel.com>

Fixes: 7471fb77 ("md/raid6: Fix anomily when recovering a single device in RAID6.")
Cc: <stable@vger.kernel.org> #4.4+
Signed-off-by: NXiao Ni <xni@redhat.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e8323e0d