Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When trying to emulate an unrecognised load or store instruction, print
the encoding to aid debug.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If kvm_get_inst() fails to find a guest TLB mapping for the guest PC
then dump the guest TLB entries. The contents of the guest TLB is likely
to be more interesting than the host TLB entries.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Trace emulation of guest access to various registers via
MFC0/MTC0/DMFC0/DMTC0 instructions (coprocessor 0) and the RDHWR
instruction (hardware registers exposed to userland), replacing some
existing kvm_debug calls. Trace events are much more practical for this
kind of debug output.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a few trace events for entering and coming out of guest mode, as well
as re-entering it from a guest exit exception.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a trace event for guest ASID changes, replacing the existing
kvm_debug call.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Clean up the MIPS kvm_exit trace event so that the exit reasons are
specified in a trace friendly way (via __print_symbolic), and so that
the exit reasons that derive straight from Cause.ExcCode values map
directly, allowing a single trace_kvm_exit() call to replace a bunch of
individual ones.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a MIPS specific trace event for auxiliary context operations
(notably FPU and MSA). Unfortunately the generic kvm_fpu trace event
isn't flexible enough to handle the range of interesting things that can
happen with FPU and MSA context.

The type of state being operated on is traced:
- FPU: Just the FPU registers.
- MSA: Just the upper half of the MSA vector registers (low half already
       loaded with FPU state).
- FPU & MSA: Full MSA vector state (includes FPU state).

As is the type of operation:
- Restore: State was enabled and restored.
- Save: State was saved and disabled.
- Enable: State was enabled (already loaded).
- Disable: State was disabled (kept loaded).
- Discard: State was discarded and disabled.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
[Fix remaining occurrence of "fpu_msa", change to "aux". - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Rename fpu_inuse and the related definitions to aux_inuse so it can be
used for lazy context management of other auxiliary processor state too,
such as VZ guest timer, watchpoints and performance counters.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Like other functions, make use of a local unsigned long va, for the
virtual address of the PC. This reduces the amount of verbose casting of
the opc pointer to an unsigned long.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The handle_tlb_ld/st_miss handlers are logically equivalent and
textually almost identical, so combine their implementations into a
single kvm_trap_emul_handle_tlb_miss().
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Convert KVM to use the MIPS_ENTRYLO_* definitions from <asm/mipsregs.h>
rather than custom definitions in kvm_host.h
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Simplify some of the TLB_ macros making use of the arrayification of
tlb_lo. Basically we index the array by the bit of the virtual address
which determines whether the even or odd entry is used, instead of
having a conditional.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The values of the EntryLo0 and EntryLo1 registers for a TLB entry are
stored in separate members of struct kvm_mips_tlb called tlb_lo0 and
tlb_lo1 respectively. To allow future code which needs to manipulate
arbitrary EntryLo data in the TLB entry to be simpler and less
conditional, replace these members with an array of two elements.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM implements its own routine for dumping the host TLB entries, but we
already have dump_tlb_all() which does something very similar (although
it only prints out TLB entries which match the current ASID or are
global).

Make KVM use dump_tlb_all() along with dump_tlb_regs() to avoid the
duplication and inevitable bitrot, allowing TLB dumping enhancements
(e.g. for VZ and GuestIDs) to be made in a single place.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM's host TLB handling routines were using tlbw hazard barrier macros
around tlb_read(). Now that hazard barrier macros exist for tlbr, update
this case to use them.

Also fix various other unnecessary hazard barriers in this code.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The host kernel's exception vector base address is currently saved in
the VCPU structure at creation time, and restored on a guest exit.
However it doesn't change and can already be easily accessed from the
'ebase' variable (arch/mips/kernel/traps.c), so drop the host_ebase
member of kvm_vcpu_arch, export the 'ebase' variable to modules and load
from there instead.

This does result in a single extra instruction (lui) on the guest exit
path, but simplifies the code a bit and removes the redundant storage of
the host exception base address.

Credit for the idea goes to Cavium's VZ KVM implementation.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The function kvm_mips_handle_mapped_seg_tlb_fault() has two completely
unused pointer arguments, hpa0 and hpa1, for which all users always pass
NULL.

Drop these two arguments and update the callers.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When handling TLB faults in the guest KSeg0 region, a pair of physical
addresses are read from the guest physical address map. However that
process is rather convoluted with an if/then/else statement. Simplify it
to just clear the lowest bit for the even entry and set the lowest bit
for the odd entry.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Several KVM module functions are indirected so that they can be accessed
from tlb.c which is statically built into the kernel. This is no longer
necessary as the relevant bits of code have moved into mmu.c which is
part of the KVM module, so drop the indirections.

Note: is_error_pfn() is defined inline in kvm_host.h, so didn't actually
require the KVM module to be loaded for it to work anyway.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Various functions in tlb.c perform higher level MMU handling, but don't
strictly need to be statically built into the kernel as they don't
directly manipulate TLB entries. Move these functions out into a
separate mmu.c which will be built into the KVM kernel module. This
allows them to directly reference KVM functions in the KVM kernel module
in future.

Module exports of these functions have been removed, since they aren't
needed outside of KVM.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The CP0 Cause register is passed around in KVM quite a bit, often as an
unsigned long, even though it is always 32-bits long.

Resize it to u32 throughout MIPS KVM.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Convert the MIPS KVM C code to use standard kernel sized types (e.g.
u32) instead of inttypes.h style ones (e.g. uint32_t) or other types as
appropriate.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Convert the MIPS kvm_host.h structs, function declaration prototypes and
associated definition prototypes to use standard kernel sized types
(e.g. u32) instead of inttypes.h style ones (e.g. uint32_t).
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The function kvm_mips_sync_icache() is unused, so lets remove it.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The host EntryHi in the KVM VCPU context is virtually unused. It gets
stored on exceptions, but only ever used in a kvm_debug() when a TLB
miss occurs.

Drop it entirely, removing that information from the kvm_debug output.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The MIPS kvm_vcpu_arch::guest_inst isn't used, so drop it from the
struct and drop its asm-offsets definition.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge MIPS patches destined to both 4.7 and kvm/next, to avoid
unnecessary conflicts.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When emulating TLB miss / invalid exceptions during CACHE instruction
emulation, be sure to set up the correct PC and host_cp0_badvaddr state
for the kvm_mips_emlulate_tlb*_ld() function to pick up for guest EPC
and BadVAddr.

PC needs to be rewound otherwise the guest EPC will end up pointing at
the next instruction after the faulting CACHE instruction.

host_cp0_badvaddr must be set because guest CACHE instructions trap with
a Coprocessor Unusable exception, which doesn't update the host BadVAddr
as a TLB exception would.

This doesn't tend to get hit when dynamic translation of emulated
instructions is enabled, since only the first execution of each CACHE
instruction actually goes through this code path, with subsequent
executions hitting the SYNCI instruction that it gets replaced with.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When a CACHE instruction is emulated by kvm_mips_emulate_cache(), the PC
is first updated to point to the next instruction, and afterwards it
falls through the "dont_update_pc" label, which rewinds the PC back to
its original address.

This works when dynamic translation of emulated instructions is enabled,
since the CACHE instruction is replaced with a SYNCI which works without
trapping, however when dynamic translation is disabled the guest hangs
on CACHE instructions as they always trap and are never stepped over.

Roughly swap the meanings of the "done" and "dont_update_pc" to match
kvm_mips_emulate_CP0(), so that "done" will roll back the PC on failure,
and "dont_update_pc" won't change PC at all (for the sake of exceptions
that have already modified the PC).
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When faulting guest addresses are matched against guest segments with
the KVM_GUEST_KSEGX() macro, change the mask to 0xe0000000 so as to
include bit 31.

This is mainly for safety's sake, as it prevents a rogue BadVAddr in the
host kseg2/kseg3 segments (e.g. 0xC*******) after a TLB exception from
matching the guest kseg0 segment (e.g. 0x4*******), triggering an
internal KVM error instead of allowing the corresponding guest kseg0
page to be mapped into the host vmalloc space.

Such a rogue BadVAddr was observed to happen with the host MIPS kernel
running under QEMU with KVM built as a module, due to a not entirely
transparent optimisation in the QEMU TLB handling. This has already been
worked around properly in a previous commit.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Copy __kvm_mips_vcpu_run() into unmapped memory, so that we can never
get a TLB refill exception in it when KVM is built as a module.

This was observed to happen with the host MIPS kernel running under
QEMU, due to a not entirely transparent optimisation in the QEMU TLB
handling where TLB entries replaced with TLBWR are copied to a separate
part of the TLB array. Code in those pages continue to be executable,
but those mappings persist only until the next ASID switch, even if they
are marked global.

An ASID switch happens in __kvm_mips_vcpu_run() at exception level after
switching to the guest exception base. Subsequent TLB mapped kernel
instructions just prior to switching to the guest trigger a TLB refill
exception, which enters the guest exception handlers without updating
EPC. This appears as a guest triggered TLB refill on a host kernel
mapped (host KSeg2) address, which is not handled correctly as user
(guest) mode accesses to kernel (host) segments always generate address
error exceptions.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.10.x-
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

arch/x86/kvm/iommu.c includes <linux/intel-iommu.h> and <linux/dmar.h>, which
both are unnecessary, in fact incorrect to be here as they are intel specific.

Building kvm on x86 passed after removing above inclusion.
Signed-off-by: NKai Huang <kai.huang@linux.intel.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

The syzkaller folks reported a NULL pointer dereference that seems
to be cause by a race between KVM_CREATE_IRQCHIP and KVM_CREATE_PIT2.
The former takes kvm->lock (except when registering the devices,
which needs kvm->slots_lock); the latter takes kvm->slots_lock only.
Change KVM_CREATE_PIT2 to follow the same model as KVM_CREATE_IRQCHIP.

Testcase:

    #include <pthread.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>
    #include <stdint.h>
    #include <string.h>
    #include <stdlib.h>
    #include <sys/syscall.h>
    #include <unistd.h>

    long r[23];

    void* thr1(void* arg)
    {
        struct kvm_pit_config pitcfg = { .flags = 4 };
        switch ((long)arg) {
        case 0: r[2]  = open("/dev/kvm", O_RDONLY|O_ASYNC);    break;
        case 1: r[3]  = ioctl(r[2], KVM_CREATE_VM, 0);         break;
        case 2: r[4]  = ioctl(r[3], KVM_CREATE_IRQCHIP, 0);    break;
        case 3: r[22] = ioctl(r[3], KVM_CREATE_PIT2, &pitcfg); break;
        }
        return 0;
    }

    int main(int argc, char **argv)
    {
        long i;
        pthread_t th[4];

        memset(r, -1, sizeof(r));
        for (i = 0; i < 4; i++) {
            pthread_create(&th[i], 0, thr, (void*)i);
            if (argc > 1 && rand()%2) usleep(rand()%1000);
        }
        usleep(20000);
        return 0;
    }
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Make the function names more similar between KVM_REQ_NMI and KVM_REQ_SMI.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

If the processor exits to KVM while delivering an interrupt,
the hypervisor then requeues the interrupt for the next vmentry.
Trying to enter SMM in this same window causes to enter non-root
mode in emulated SMM (i.e. with IF=0) and with a request to
inject an IRQ (i.e. with a valid VM-entry interrupt info field).
This is invalid guest state (SDM 26.3.1.4 "Check on Guest RIP
and RFLAGS") and the processor fails vmentry.

The fix is to defer the injection from KVM_REQ_SMI to KVM_REQ_EVENT,
like we already do for e.g. NMIs.  This patch doesn't change the
name of the process_smi function so that it can be applied to
stable releases.  The next patch will modify the names so that
process_nmi and process_smi handle respectively KVM_REQ_NMI and
KVM_REQ_SMI.

This is especially common with Windows, probably due to the
self-IPI trick that it uses to deliver deferred procedure
calls (DPCs).
Reported-by: NLaszlo Ersek <lersek@redhat.com>
Reported-by: NMichał Zegan <webczat_200@poczta.onet.pl>
Fixes: 64d60670
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Pull KVM fixes from Radim Krčmář:
 "ARM:
   - two fixes for 4.6 vgic [Christoffer] (cc stable)

   - six fixes for 4.7 vgic [Marc]

  x86:
   - six fixes from syzkaller reports [Paolo] (two of them cc stable)

   - allow OS X to boot [Dmitry]

   - don't trust compilers [Nadav]"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: fix OOPS after invalid KVM_SET_DEBUGREGS
  KVM: x86: avoid vmalloc(0) in the KVM_SET_CPUID
  KVM: irqfd: fix NULL pointer dereference in kvm_irq_map_gsi
  KVM: fail KVM_SET_VCPU_EVENTS with invalid exception number
  KVM: x86: avoid vmalloc(0) in the KVM_SET_CPUID
  kvm: x86: avoid warning on repeated KVM_SET_TSS_ADDR
  KVM: Handle MSR_IA32_PERF_CTL
  KVM: x86: avoid write-tearing of TDP
  KVM: arm/arm64: vgic-new: Removel harmful BUG_ON
  arm64: KVM: vgic-v3: Relax synchronization when SRE==1
  arm64: KVM: vgic-v3: Prevent the guest from messing with ICC_SRE_EL1
  arm64: KVM: Make ICC_SRE_EL1 access return the configured SRE value
  KVM: arm/arm64: vgic-v3: Always resample level interrupts
  KVM: arm/arm64: vgic-v2: Always resample level interrupts
  KVM: arm/arm64: vgic-v3: Clear all dirty LRs
  KVM: arm/arm64: vgic-v2: Clear all dirty LRs

MOV to DR6 or DR7 causes a #GP if an attempt is made to write a 1 to
any of bits 63:32.  However, this is not detected at KVM_SET_DEBUGREGS
time, and the next KVM_RUN oopses:

   general protection fault: 0000 [#1] SMP
   CPU: 2 PID: 14987 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1
   Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
   [...]
   Call Trace:
    [<ffffffffa072c93d>] kvm_arch_vcpu_ioctl_run+0x141d/0x14e0 [kvm]
    [<ffffffffa071405d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm]
    [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480
    [<ffffffff812418a9>] SyS_ioctl+0x79/0x90
    [<ffffffff817a0f2e>] entry_SYSCALL_64_fastpath+0x12/0x71
   Code: 55 83 ff 07 48 89 e5 77 27 89 ff ff 24 fd 90 87 80 81 0f 23 fe 5d c3 0f 23 c6 5d c3 0f 23 ce 5d c3 0f 23 d6 5d c3 0f 23 de 5d c3 <0f> 23 f6 5d c3 0f 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00
   RIP  [<ffffffff810639eb>] native_set_debugreg+0x2b/0x40
    RSP <ffff88005836bd50>

Testcase (beautified/reduced from syzkaller output):

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[8];

    int main()
    {
        struct kvm_debugregs dr = { 0 };

        r[2] = open("/dev/kvm", O_RDONLY);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);

        memcpy(&dr,
               "\x5d\x6a\x6b\xe8\x57\x3b\x4b\x7e\xcf\x0d\xa1\x72"
               "\xa3\x4a\x29\x0c\xfc\x6d\x44\x00\xa7\x52\xc7\xd8"
               "\x00\xdb\x89\x9d\x78\xb5\x54\x6b\x6b\x13\x1c\xe9"
               "\x5e\xd3\x0e\x40\x6f\xb4\x66\xf7\x5b\xe3\x36\xcb",
               48);
        r[7] = ioctl(r[4], KVM_SET_DEBUGREGS, &dr);
        r[6] = ioctl(r[4], KVM_RUN, 0);
    }
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

This causes an ugly dmesg splat.  Beautified syzkaller testcase:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <sys/ioctl.h>
    #include <fcntl.h>
    #include <linux/kvm.h>

    long r[8];

    int main()
    {
        struct kvm_irq_routing ir = { 0 };
        r[2] = open("/dev/kvm", O_RDWR);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_SET_GSI_ROUTING, &ir);
        return 0;
    }
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Found by syzkaller:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000120
    IP: [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm]
    PGD 6f80b067 PUD b6535067 PMD 0
    Oops: 0000 [#1] SMP
    CPU: 3 PID: 4988 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1
    [...]
    Call Trace:
     [<ffffffffa0795f62>] irqfd_update+0x32/0xc0 [kvm]
     [<ffffffffa0796c7c>] kvm_irqfd+0x3dc/0x5b0 [kvm]
     [<ffffffffa07943f4>] kvm_vm_ioctl+0x164/0x6f0 [kvm]
     [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480
     [<ffffffff812418a9>] SyS_ioctl+0x79/0x90
     [<ffffffff817a1062>] tracesys_phase2+0x84/0x89
    Code: b5 71 a7 e0 5b 41 5c 41 5d 5d f3 c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 8b 8f 10 2e 00 00 31 c0 48 89 e5 <39> 91 20 01 00 00 76 6a 48 63 d2 48 8b 94 d1 28 01 00 00 48 85
    RIP  [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm]
     RSP <ffff8800926cbca8>
    CR2: 0000000000000120

Testcase:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[26];

    int main()
    {
        memset(r, -1, sizeof(r));
        r[2] = open("/dev/kvm", 0);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);

        struct kvm_irqfd ifd;
        ifd.fd = syscall(SYS_eventfd2, 5, 0);
        ifd.gsi = 3;
        ifd.flags = 2;
        ifd.resamplefd = ifd.fd;
        r[25] = ioctl(r[3], KVM_IRQFD, &ifd);
        return 0;
    }
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>