John W. Linville says:

====================
Please pull this batch of fixes intended for the 3.15 stream!

Chun-Yeow Yeoh gives us an ath9k_htc fix so that mac80211 can report
last_tx_rate correctly for those devices..

Fariya Fatima has a number of small fixes for things identified by
the static analysis folks in the new rsi driver.

Felix Fietkau brings an ath9k fix to better support some older chips,
and a fix for a scheduling while atomic bug introduced by an earlier
patch.

Janusz Dziedzic produced an ath9k fix to only enable DFS when a
related build option is selected.

Paul Bolle removes some dead code in rtlwifi.

Rafał Miłecki fixes some b43 code that was accessing some registers
with operations for the wrong register width.

Please let me know if there are problems!
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mugunthan V N says:

====================
This patch series fixes the cpsw issue with interface up/dpwn with high
ethernet traffic.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the Ethernet interface is put down and up with heavy Ethernet
traffic, then there is prossibility of an interrupt waiting in irq
controller to be processed, so when the interface is brought up again
just after enable interrupt, it goes to ISR due to the previous
unhandled interrutp and in ISR napi is not scheduled as the napi
is not enabled in ndo_open which results in disabled interrupt for
CPSW and no packets are received in cpsw. So this patch moves enabling
of interupts after napi_enable and clearing CPDMA interrupts.
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the Ethernet interface is brought down during high Ethernet traffic,
then cpsw creates the following warn dump. When cpdma has already processed
the packet then the status will be greater than 0, so the cpsw_rx_handler
considers that the interface is up and try to resubmit one more rx buffer
to cpdma which fails as the DMA is in teardown process. This can be avoided
by checking the interface state and then process the received packet, if the
interface is down just discard and free the skb and return.

[ 2823.104591] WARNING: CPU: 0 PID: 1823 at drivers/net/ethernet/ti/cpsw.c:711 cpsw_rx_handler+0x148/0x164()
[ 2823.114654] Modules linked in:
[ 2823.117872] CPU: 0 PID: 1823 Comm: ifconfig Tainted: G        W     3.14.0-11992-gf34c4a35 #11
[ 2823.126860] [<c0014b5c>] (unwind_backtrace) from [<c00117e4>] (show_stack+0x10/0x14)
[ 2823.135030] [<c00117e4>] (show_stack) from [<c0533a9c>] (dump_stack+0x80/0x9c)
[ 2823.142619] [<c0533a9c>] (dump_stack) from [<c003f0e0>] (warn_slowpath_common+0x6c/0x90)
[ 2823.151141] [<c003f0e0>] (warn_slowpath_common) from [<c003f120>] (warn_slowpath_null+0x1c/0x24)
[ 2823.160336] [<c003f120>] (warn_slowpath_null) from [<c03caeb0>] (cpsw_rx_handler+0x148/0x164)
[ 2823.169314] [<c03caeb0>] (cpsw_rx_handler) from [<c03c730c>] (__cpdma_chan_free+0x90/0xa8)
[ 2823.178028] [<c03c730c>] (__cpdma_chan_free) from [<c03c7418>] (__cpdma_chan_process+0xf4/0x134)
[ 2823.187279] [<c03c7418>] (__cpdma_chan_process) from [<c03c7560>] (cpdma_chan_stop+0xb4/0x17c)
[ 2823.196349] [<c03c7560>] (cpdma_chan_stop) from [<c03c766c>] (cpdma_ctlr_stop+0x44/0x9c)
[ 2823.204872] [<c03c766c>] (cpdma_ctlr_stop) from [<c03cb708>] (cpsw_ndo_stop+0x154/0x188)
[ 2823.213321] [<c03cb708>] (cpsw_ndo_stop) from [<c046f0ec>] (__dev_close_many+0x84/0xc8)
[ 2823.221761] [<c046f0ec>] (__dev_close_many) from [<c046f158>] (__dev_close+0x28/0x3c)
[ 2823.230012] [<c046f158>] (__dev_close) from [<c0474ca8>] (__dev_change_flags+0x88/0x160)
[ 2823.238483] [<c0474ca8>] (__dev_change_flags) from [<c0474da0>] (dev_change_flags+0x18/0x48)
[ 2823.247316] [<c0474da0>] (dev_change_flags) from [<c04d12c4>] (devinet_ioctl+0x61c/0x6e0)
[ 2823.255884] [<c04d12c4>] (devinet_ioctl) from [<c045c660>] (sock_ioctl+0x68/0x2a4)
[ 2823.263789] [<c045c660>] (sock_ioctl) from [<c0125fe4>] (do_vfs_ioctl+0x78/0x61c)
[ 2823.271629] [<c0125fe4>] (do_vfs_ioctl) from [<c01265ec>] (SyS_ioctl+0x64/0x74)
[ 2823.279284] [<c01265ec>] (SyS_ioctl) from [<c000e580>] (ret_fast_syscall+0x0/0x48)
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several spots in the kernel perform a sequence like:

	skb_queue_tail(&sk->s_receive_queue, skb);
	sk->sk_data_ready(sk, skb->len);

But at the moment we place the SKB onto the socket receive queue it
can be consumed and freed up.  So this skb->len access is potentially
to freed up memory.

Furthermore, the skb->len can be modified by the consumer so it is
possible that the value isn't accurate.

And finally, no actual implementation of this callback actually uses
the length argument.  And since nobody actually cared about it's
value, lots of call sites pass arbitrary values in such as '0' and
even '1'.

So just remove the length argument from the callback, that way there
is no confusion whatsoever and all of these use-after-free cases get
fixed as a side effect.

Based upon a patch by Eric Dumazet and his suggestion to audit this
issue tree-wide.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

K. Y. Srinivasan says:

====================
Fix issues with Heper-V network offload code

WS2008 R2 does not support udp checksum offload. Furthermore, ws2012 and
ws2012 r2 have issues offloading udp checksum from Linux guests.
This patch-set addresses these issues as well as other bug fixes.
Please apply.

In this version, I have addressed the comment from David Miller with reagards
to COWing the skb prior to modifying the header (patch 3/3).
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ws2008r2 does not support UDP checksum offload. Thus, we cannnot turn on
UDP offload in the host. Also, on ws2012 and ws2012 r2, there appear to be
an issue with UDP checksum offload.
Fix this issue by computing the UDP checksum in the Hyper-V driver.

Based on Dave Miller's comments, in this version, I have COWed the skb
before modifying the UDP header (the checksum field).
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ws2008R2 supports ndis_version 6.1 and 6.1 is the minimal version required
for various offloads. Negotiate ndis_version 6.1 when on ws2008r2.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An outgoing packet can potentially need per-packet information for
all the offloads and VLAN tagging. Fix this issue.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

br_allowed_ingress() has two problems.

1. If br_allowed_ingress() is called by br_handle_frame_finish() and
vlan_untag() in br_allowed_ingress() fails, skb will be freed by both
vlan_untag() and br_handle_frame_finish().

2. If br_allowed_ingress() is called by br_dev_xmit() and
br_allowed_ingress() fails, the skb will not be freed.

Fix these two problems by freeing the skb in br_allowed_ingress()
if it fails.
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the bonding debug_fs entries when the
module initialization fails. The debug_fs
entries should be removed together with all other
already allocated resources.
Signed-off-by: NThomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: NJay Vosburgh <j.vosburgh@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case of tcp, gso_size contains the tcpmss.

For UFO (udp fragmentation offloading) skbs, gso_size is the fragment
payload size, i.e. we must not account for udp header size.

Otherwise, when using virtio drivers, a to-be-forwarded UFO GSO packet
will be needlessly fragmented in the forward path, because we think its
individual segments are too large for the outgoing link.

Fixes: fe6cc55f ("net: ip, ipv6: handle gso skbs in forwarding path")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: NTobias Brunner <tobias@strongswan.org>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

When l2tp driver tries to get PMTU for the tunnel destination, it uses
the pointer to struct sock that represents PPPoX socket, while it
should use the pointer that represents UDP socket of the tunnel.
Signed-off-by: NDmitry Petukhov <dmgenp@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dual EMAC works with VLAN segregation of the ports, so default vlan needs
to be added in dual EMAC case else default vlan will be tagged for all
egress packets and vlan unaware switches/servers will drop packets
from the EVM.
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Tested-by: NYegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit "ath9k: prepare for multi-interface CSA support" added a call to
ieee80211_iterate_active_interfaces in atomic context (beacon tasklet),
which is crashing.
Use ieee80211_iterate_active_interfaces_atomic instead.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Use 0-8 instead of 0-16, which is closer to the old implementation.
Also drop the overwrite of the firstep_low parameter to improve
stability.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Add DFS interface combination only when
CONFIG_ATH9K_DFS_CERTIFIED is set. In other case
user can run CAC/beaconing without proper handling
of pulse events (without radar detection activated).
Reported-by: NCedric Voncken <cedric.voncken@acksys.fr>
Signed-off-by: NJanusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Register B43_MMIO_PSM_PHY_HDR is 16 bit one, so accessing it with 32b
functions isn't safe. On my machine it causes delayed (!) CPU exception:

Disabling lock debugging due to kernel taint
mce: [Hardware Error]: CPU 0: Machine Check Exception: 4 Bank 4: b200000000070f0f
mce: [Hardware Error]: TSC 164083803dc
mce: [Hardware Error]: PROCESSOR 2:20fc2 TIME 1396650505 SOCKET 0 APIC 0 microcode 0
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Processor context corrupt
Kernel panic - not syncing: Fatal machine check on current CPU
Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff)
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Acked-by: NLarry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [2.6.35+]
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

There are references to four undefined Kconfig macros in the code.
Commit 8542373d ("Staging: rtl8812ae: remove undefined Kconfig
macros") removed identical references from that staging driver, but
they resurfaced in rtlwifi. Remove these again as the checks for them
still will always evaluate to false.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Frame aggregation requires the IEEE80211_TX_STAT_AMPDU to
be set so that mac80211 can report the last_tx_rate correctly.
Signed-off-by: NChun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NFariya Fatima <fariyaf@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NFariya Fatima <fariyaf@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NFariya Fatima <fariyaf@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NFariya Fatima <fariyaf@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NFariya Fatima <fariyaf@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NFariya Fatima <fariyaf@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This condition check makes no difference in the code flow since 3.10
Signed-off-by: NBalakumaran Kannan <kumaran.4353@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In function sctp_wake_up_waiters(), we need to involve a test
if the association is declared dead. If so, we don't have any
reference to a possible sibling association anymore and need
to invoke sctp_write_space() instead, and normally walk the
socket's associations and notify them of new wmem space. The
reason for special casing is that otherwise, we could run
into the following issue when a sctp_primitive_SEND() call
from sctp_sendmsg() fails, and tries to flush an association's
outq, i.e. in the following way:

sctp_association_free()
`-> list_del(&asoc->asocs)         <-- poisons list pointer
    asoc->base.dead = true
    sctp_outq_free(&asoc->outqueue)
    `-> __sctp_outq_teardown()
     `-> sctp_chunk_free()
      `-> consume_skb()
       `-> sctp_wfree()
        `-> sctp_wake_up_waiters() <-- dereferences poisoned pointers
                                       if asoc->ep->sndbuf_policy=0

Therefore, only walk the list in an 'optimized' way if we find
that the current association is still active. We could also use
list_del_init() in addition when we call sctp_association_free(),
but as Vlad suggests, we want to trap such bugs and thus leave
it poisoned as is.

Why is it safe to resolve the issue by testing for asoc->base.dead?
Parallel calls to sctp_sendmsg() are protected under socket lock,
that is lock_sock()/release_sock(). Only within that path under
lock held, we're setting skb/chunk owner via sctp_set_owner_w().
Eventually, chunks are freed directly by an association still
under that lock. So when traversing association list on destruction
time from sctp_wake_up_waiters() via sctp_wfree(), a different
CPU can't be running sctp_wfree() while another one calls
sctp_association_free() as both happens under the same lock.
Therefore, this can also not race with setting/testing against
asoc->base.dead as we are guaranteed for this to happen in order,
under lock. Further, Vlad says: the times we check asoc->base.dead
is when we've cached an association pointer for later processing.
In between cache and processing, the association may have been
freed and is simply still around due to reference counts. We check
asoc->base.dead under a lock, so it should always be safe to check
and not race against sctp_association_free(). Stress-testing seems
fine now, too.

Fixes: cd253f9f357d ("net: sctp: wake up all assocs if sndbuf policy is per socket")
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Cc: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NVlad Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull more networking updates from David Miller:

 1) If a VXLAN interface is created with no groups, we can crash on
    reception of packets.  Fix from Mike Rapoport.

 2) Missing includes in CPTS driver, from Alexei Starovoitov.

 3) Fix string validations in isdnloop driver, from YOSHIFUJI Hideaki
    and Dan Carpenter.

 4) Missing irq.h include in bnxw2x, enic, and qlcnic drivers.  From
    Josh Boyer.

 5) AF_PACKET transmit doesn't statistically count TX drops, from Daniel
    Borkmann.

 6) Byte-Queue-Limit enabled drivers aren't handled properly in
    AF_PACKET transmit path, also from Daniel Borkmann.

    Same problem exists in pktgen, and Daniel fixed it there too.

 7) Fix resource leaks in driver probe error paths of new sxgbe driver,
    from Francois Romieu.

 8) Truesize of SKBs can gradually get more and more corrupted in NAPI
    packet recycling path, fix from Eric Dumazet.

 9) Fix uniprocessor netfilter build, from Florian Westphal.  In the
    longer term we should perhaps try to find a way for ARRAY_SIZE() to
    work even with zero sized array elements.

10) Fix crash in netfilter conntrack extensions due to mis-estimation of
    required extension space.  From Andrey Vagin.

11) Since we commit table rule updates before trying to copy the
    counters back to userspace (it's the last action we perform), we
    really can't signal the user copy with an error as we are beyond the
    point from which we can unwind everything.  This causes all kinds of
    use after free crashes and other mysterious behavior.

    From Thomas Graf.

12) Restore previous behvaior of div/mod by zero in BPF filter
    processing.  From Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
  net: sctp: wake up all assocs if sndbuf policy is per socket
  isdnloop: several buffer overflows
  netdev: remove potentially harmful checks
  pktgen: fix xmit test for BQL enabled devices
  net/at91_ether: avoid NULL pointer dereference
  tipc: Let tipc_release() return 0
  at86rf230: fix MAX_CSMA_RETRIES parameter
  mac802154: fix duplicate #include headers
  sxgbe: fix duplicate #include headers
  net: filter: be more defensive on div/mod by X==0
  netfilter: Can't fail and free after table replacement
  xen-netback: Trivial format string fix
  net: bcmgenet: Remove unnecessary version.h inclusion
  net: smc911x: Remove unused local variable
  bonding: Inactive slaves should keep inactive flag's value
  netfilter: nf_tables: fix wrong format in request_module()
  netfilter: nf_tables: set names cannot be larger than 15 bytes
  netfilter: nf_conntrack: reserve two bytes for nf_ct_ext->len
  netfilter: Add {ipt,ip6t}_osf aliases for xt_osf
  netfilter: x_tables: allow to use cgroup match for LOCAL_IN nf hooks
  ...

Pull more staging patches from Greg KH:
 "Here are some more staging patches for 3.15-rc1.

  They include a late-submission of a wireless driver that a bunch of
  people seem to have the hardware for now.  As it's stand-alone, it
  should be fine (now passes the 0-day random build bot tests).

  There are also some fixes for the unisys drivers, as they were causing
  havoc on a number of different machines.  To resolve all of those
  issues, we just mark the driver as BROKEN now, and we can fix it up
  "properly" over time"

* tag 'staging-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8723au: The 8723 only has two paths
  Staging: unisys: mark drivers as BROKEN
  Staging: unisys: verify that a control channel exists
  staging: unisys: Add missing close parentheses in filexfer.c
  staging: r8723au: Fix build problem when RFKILL is not selected
  staging: r8723au: Fix randconfig build errors
  staging: r8723au: Turn on build of new driver
  staging: r8723au: Additional source patches
  staging: r8723au: Add source files for new driver - part 4
  staging: r8723au: Add source files for new driver - part 3
  staging: r8723au: Add source files for new driver - part 2
  staging: r8723au: Add source files for new driver - part 1

Pull second set of arm64 updates from Catalin Marinas:
 "A second pull request for this merging window, mainly with fixes and
  docs clarification:

   - Documentation clarification on CPU topology and booting
     requirements
   - Additional cache flushing during boot (needed in the presence of
     external caches or under virtualisation)
   - DMA range invalidation fix for non cache line aligned buffers
   - Build failure fix with !COMPAT
   - Kconfig update for STRICT_DEVMEM"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix DMA range invalidation for cache line unaligned buffers
  arm64: Add missing Kconfig for CONFIG_STRICT_DEVMEM
  arm64: fix !CONFIG_COMPAT build failures
  Revert "arm64: virt: ensure visibility of __boot_cpu_mode"
  arm64: Relax the kernel cache requirements for boot
  arm64: Update the TCR_EL1 translation granule definitions for 16K pages
  ARM: topology: Make it clear that all CPUs need to be described

Pull second set of s390 patches from Martin Schwidefsky:
 "The second part of Heikos uaccess rework, the page table walker for
  uaccess is now a thing of the past (yay!)

  The code change to fix the theoretical TLB flush problem allows us to
  add a TLB flush optimization for zEC12, this machine has new
  instructions that allow to do CPU local TLB flushes for single pages
  and for all pages of a specific address space.

  Plus the usual bug fixing and some more cleanup"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/uaccess: rework uaccess code - fix locking issues
  s390/mm,tlb: optimize TLB flushing for zEC12
  s390/mm,tlb: safeguard against speculative TLB creation
  s390/irq: Use defines for external interruption codes
  s390/irq: Add defines for external interruption codes
  s390/sclp: add timeout for queued requests
  kvm/s390: also set guest pages back to stable on kexec/kdump
  lcs: Add missing destroy_timer_on_stack()
  s390/tape: Add missing destroy_timer_on_stack()
  s390/tape: Use del_timer_sync()
  s390/3270: fix crash with multiple reset device requests
  s390/bitops,atomic: add missing memory barriers
  s390/zcrypt: add length check for aligned data to avoid overflow in msg-type 6

SCTP charges chunks for wmem accounting via skb->truesize in
sctp_set_owner_w(), and sctp_wfree() respectively as the
reverse operation. If a sender runs out of wmem, it needs to
wait via sctp_wait_for_sndbuf(), and gets woken up by a call
to __sctp_write_space() mostly via sctp_wfree().

__sctp_write_space() is being called per association. Although
we assign sk->sk_write_space() to sctp_write_space(), which
is then being done per socket, it is only used if send space
is increased per socket option (SO_SNDBUF), as SOCK_USE_WRITE_QUEUE
is set and therefore not invoked in sock_wfree().

Commit 4c3a5bda ("sctp: Don't charge for data in sndbuf
again when transmitting packet") fixed an issue where in case
sctp_packet_transmit() manages to queue up more than sndbuf
bytes, sctp_wait_for_sndbuf() will never be woken up again
unless it is interrupted by a signal. However, a still
remaining issue is that if net.sctp.sndbuf_policy=0, that is
accounting per socket, and one-to-many sockets are in use,
the reclaimed write space from sctp_wfree() is 'unfairly'
handed back on the server to the association that is the lucky
one to be woken up again via __sctp_write_space(), while
the remaining associations are never be woken up again
(unless by a signal).

The effect disappears with net.sctp.sndbuf_policy=1, that
is wmem accounting per association, as it guarantees a fair
share of wmem among associations.

Therefore, if we have reclaimed memory in case of per socket
accounting, wake all related associations to a socket in a
fair manner, that is, traverse the socket association list
starting from the current neighbour of the association and
issue a __sctp_write_space() to everyone until we end up
waking ourselves. This guarantees that no association is
preferred over another and even if more associations are
taken into the one-to-many session, all receivers will get
messages from the server and are not stalled forever on
high load. This setting still leaves the advantage of per
socket accounting in touch as an association can still use
up global limits if unused by others.

Fixes: 4eb701df ("[SCTP] Fix SCTP sendbuffer accouting.")
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: NVlad Yasevich <vyasevic@redhat.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull drm updates from Dave Airlie:
 "Highlights:

   - drm:

     Generic display port aux features, primary plane support, drm
     master management fixes, logging cleanups, enforced locking checks
     (instead of docs), documentation improvements, minor number
     handling cleanup, pseudofs for shared inodes.

   - ttm:

     add ability to allocate from both ends

   - i915:

     broadwell features, power domain and runtime pm, per-process
     address space infrastructure (not enabled)

   - msm:

     power management, hdmi audio support

   - nouveau:

     ongoing GPU fault recovery, initial maxwell support, random fixes

   - exynos:

     refactored driver to clean up a lot of abstraction, DP support
     moved into drm, LVDS bridge support added, parallel panel support

   - gma500:

     SGX MMU support, SGX irq handling, asle irq work fixes

   - radeon:

     video engine bringup, ring handling fixes, use dp aux helpers

   - vmwgfx:

     add rendernode support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits)
  DRM: armada: fix corruption while loading cursors
  drm/dp_helper: don't return EPROTO for defers (v2)
  drm/bridge: export ptn3460_init function
  drm/exynos: remove MODULE_DEVICE_TABLE definitions
  ARM: dts: exynos4412-trats2: enable exynos/fimd node
  ARM: dts: exynos4210-trats: enable exynos/fimd node
  ARM: dts: exynos4412-trats2: add panel node
  ARM: dts: exynos4210-trats: add panel node
  ARM: dts: exynos4: add MIPI DSI Master node
  drm/panel: add S6E8AA0 driver
  ARM: dts: exynos4210-universal_c210: add proper panel node
  drm/panel: add ld9040 driver
  panel/ld9040: add DT bindings
  panel/s6e8aa0: add DT bindings
  drm/exynos: add DSIM driver
  exynos/dsim: add DT bindings
  drm/exynos: disallow fbdev initialization if no device is connected
  drm/mipi_dsi: create dsi devices only for nodes with reg property
  drm/mipi_dsi: add flags to DSI messages
  Skip intel_crt_init for Dell XPS 8700
  ...

There are three buffer overflows addressed in this patch.

1) In isdnloop_fake_err() we add an 'E' to a 60 character string and
then copy it into a 60 character buffer.  I have made the destination
buffer 64 characters and I'm changed the sprintf() to a snprintf().

2) In isdnloop_parse_cmd(), p points to a 6 characters into a 60
character buffer so we have 54 characters.  The ->eazlist[] is 11
characters long.  I have modified the code to return if the source
buffer is too long.

3) In isdnloop_command() the cbuf[] array was 60 characters long but the
max length of the string then can be up to 79 characters.  I made the
cbuf array 80 characters long and changed the sprintf() to snprintf().
I also removed the temporary "dial" buffer and changed it to use "p"
directly.

Unfortunately, we pass the "cbuf" string from isdnloop_command() to
isdnloop_writecmd() which truncates anything over 60 characters to make
it fit in card->omsg[].  (It can accept values up to 255 characters so
long as there is a '\n' character every 60 characters).  For now I have
just fixed the memory corruption bug and left the other problems in this
driver alone.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the buffer needing cache invalidation for inbound DMA does start or
end on a cache line aligned address, we need to use the non-destructive
clean&invalidate operation. This issue was introduced by commit
7363590d (arm64: Implement coherent DMA API based on swiotlb).
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Reported-by: NJon Medhurst (Tixy) <tixy@linaro.org>

Pull ext3 improvements, cleanups, reiserfs fix from Jan Kara:
 "various cleanups for ext2, ext3, udf, isofs, a documentation update
  for quota, and a fix of a race in reiserfs readdir implementation"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  reiserfs: fix race in readdir
  ext2: acl: remove unneeded include of linux/capability.h
  ext3: explicitly remove inode from orphan list after failed direct io
  fs/isofs/inode.c add __init to init_inodecache()
  ext3: Speedup WB_SYNC_ALL pass
  fs/quota/Kconfig: Update filesystems
  ext3: Update outdated comment before ext3_ordered_writepage()
  ext3: Update PF_MEMALLOC handling in ext3_write_inode()
  ext2/3: use prandom_u32() instead of get_random_bytes()
  ext3: remove an unneeded check in ext3_new_blocks()
  ext3: remove unneeded check in ext3_ordered_writepage()
  fs: Mark function as static in ext3/xattr_security.c
  fs: Mark function as static in ext3/dir.c
  fs: Mark function as static in ext2/xattr_security.c
  ext3: Add __init macro to init_inodecache
  ext2: Add __init macro to init_inodecache
  udf: Add __init macro to init_inodecache
  fs: udf: parse_options: blocksize check

Pull kbuild changes from Michal Marek:
 - cleanups in the main Makefiles and Documentation/DocBook/Makefile
 - make O=...  directory is automatically created if needed
 - mrproper/distclean removes the old include/linux/version.h to make
   life easier when bisecting across the commit that moved the version.h
   file

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: docbook: fix the include error when executing "make help"
  kbuild: create a build directory automatically for out-of-tree build
  kbuild: remove redundant '.*.cmd' pattern from make distclean
  kbuild: move "quote" to Kbuild.include to be consistent
  kbuild: docbook: use $(obj) and $(src) rather than specific path
  kbuild: unconditionally clobber include/linux/version.h on distclean
  kbuild: docbook: specify KERNELDOC dependency correctly
  kbuild: docbook: include cmd files more simply
  kbuild: specify build_docproc as a phony target