As per Russell King's last review comment, find and remove
all unnecessary includes of <linux/delay.h> in the files
that do not need them.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The commit 39263db7986bf15c753f6847699107bdf5a2e318 added
a default <mach/io.h> implementation which is shared if
needed between all the s3c implementations. Remove the
s3c24a0 version which is the same as this.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

As noted by Russell King, do not print any warnings if the
uinfo or tty fields are not set when a CPU frequency change
is sent.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The changes for ARM highmem support have removed the need
for the __virt_to_bus and __bus_to_virt macros, so remove them
from this build.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add the fourth UART definition for the S3C2443, and at the
same time fixup the problems caused by the enlarging of the
UART array in the previous commits.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the usage of CONFIG_SERIAL_SAMSUNG_UARTS in several places
in the kernel where it had been missed. This finishes fixing a
long standing issue where S3C2443 and S3C64XX could not use the
4th UART
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Update the serial driver to handle the 4 ports of the
S3C2443 and S364XX series.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Conflicts:

	arch/arm/mach-s3c2440/mach-at2440evb.c

Add LCD frame buffer support for AT2440EVB board.
Signed-off-by: NRamax Lo <ramaxlo@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add SD/MMC support for AT2440EVB board.
Signed-off-by: NRamax Lo <ramaxlo@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add GPIO support to the SM501 on the Simtec Anubis,
and then add the necessary updates for allowing the
two gpio I2C busses to be used.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add Kconfig entries to allow more GPIO space to
be specified depending on the machine(s) selected.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the name of the driver, as well as the fact we are not
passing the number of chipselects to the driver.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

A common core driver for the S3C24XX ADC block so that
the touchscreen, hwmon and any other drivers can share
the resource.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add a configuration option to start the UART FIFOs during the
decompressions sequence to improve boot time when the bootloader
fails to enable the UART FIFOs.

For example, the SMDK6410 UBoot 1.1.6 leaves the FIFOs off.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Select the correct EINT configuration register when configuring
the external interrupt level/edge type.
Signed-off-by: NMatt Hsu <matt_hsu@openmoko.org>
[ben-linux@fluff.org: description improvement]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Correct the PLL field masks to ensure the PLL functions return the
right value.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[ben-linux@fluff.org: improve the description text]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the initialisation of the fifo data in the uncompression serial
routines to ensure that if the FIFO is enabled, that the serial output
is not corrupted.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[ben-linux@fluff.org: edit description to add more detail]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The S3C64XX timer is running at the wrong rate due to the
assumptions made in the timer initialisation about the way
the pwm dividers work. This means that time on the S3C64XX
runs twice as fast as it should.

Fix the problem by moving to using the clk framework to setup
the pwm timer clock muxes, as the pwm-clock code has all the
necessary knowledge of how the timer clock inputs are routed.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The S3C64XX series has a new TCFG divider setting to allow the clock
directly through, which means that we need to update the pwm-clock
code to cope with this.

Add <mach/pwm-clock.h> containing the specific code to deal with the
TCFG divider settings and provide any other per-arch data that the
pwm-clock driver needs to function.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add support for the LCD 48WVGA module attached to the
SMDK6410.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add a standard helper to configure the LCD output pins for a 24BPP
display with VSYNC/HSYNC/VDEN.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add a device definition for the new S3C framebuffer
driver.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add device definition and support functions for the
second i2c device (i2c1). If this is selected, the first
i2c bus will become index 0 instead of index -1.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Provide  the initial register definitions for the newer
style of framebuffer cores found in the Samsung SoCs
such as S3C2450, S3C64XX.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the compilation of the SDHCI configuration/setup
functions to depend on their respective configuration
variables.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Select the correct GPIO configuration function for channel 1
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add the Samsung SDHCI driver to the build.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add the new I2C driver and the EEPROM devices to
the system, as well as update to the latest kernel.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add SDHCI channel 1.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the definition of the MMC0 register shift and mask in the
CLKSRC register.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The function s3c64xx_init_io was missing from <plat/cpu.h>
and was masked by the SMDK6410 having an local definition.

Fix by removing the SMDK6410 variant and adding it to the
relevant <plat/cpu.h> file.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add a header to define setup functions for the i2c
devices.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add the I2C devices on the SMDK6410.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add the second I2C channel on the SMDK6410.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add common gpio setup for i2c bus 1 on all current
S3C64XX architectures.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add i2c bus 0 to the configuration
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add the necessary device initialisation information
for I2C device 0.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>