- 21 1月, 2011 1 次提交
-
-
由 David Rientjes 提交于
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NDavid Woodhouse <david.woodhouse@intel.com> Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 8月, 2010 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This trims all our defconfigs using make savedefconfig Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 20 4月, 2010 2 次提交
-
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kim Phillips 提交于
a recent fc11 udev update on an 83xx board made root console login disappear: Updating : udev-141-8.fc11.ppc 32/83 udev: starting version 141 udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly and sure enough, turning off SYSFS_DEPRECATED brings the login prompt back. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 06 1月, 2010 1 次提交
-
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 05 11月, 2009 1 次提交
-
-
由 Kumar Gala 提交于
Updated mpc85xx_{smp_}defconfig to enable: * XES_MPC85xx board * PCI MSI * RapidIO Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 30 7月, 2009 1 次提交
-
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 16 6月, 2009 1 次提交
-
-
由 Nate Case 提交于
Signed-off-by: NNate Case <ncase@xes-inc.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 21 4月, 2009 1 次提交
-
-
由 Grant Likely 提交于
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 27 2月, 2009 1 次提交
-
-
由 Grzegorz Bernacki 提交于
The following options are enabled to support the digsy-mtc. - LXT phy - AT24 eeprom - RTC (DS1337) - MTD partitioning based on OF description Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 30 1月, 2009 1 次提交
-
-
由 Grant Likely 提交于
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 27 1月, 2009 1 次提交
-
-
由 Jean Delvare 提交于
Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
-
- 15 11月, 2008 1 次提交
-
-
由 Grant Likely 提交于
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 22 1月, 2008 1 次提交
-
-
由 Grant Likely 提交于
There is no reason to have separate defconfigs for each mpc5200 board. Instead, here is a common defconfig that can be used for all supported platforms. Merging the defconfigs means there are fewer configuration to test when compile testing all of arch/powerpc and should make support easier. Supported boards: Lite5200(b), Efika, TQM5200, CM5200, MotionPro Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 06 12月, 2007 1 次提交
-
-
由 Paul Mackerras 提交于
This updates all the defconfigs in arch/powerpc/configs except iseries and ps3, which were updated by the preceding commits. This mostly takes the defaults, except that I turned on tickless idle and high-resolution timers for everything, and turned off instrumentation support and "Fair group CPU scheduler" for the smaller/embedded platforms. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 21 11月, 2007 1 次提交
-
-
由 Grant Likely 提交于
USB support for the 8349itx got added a while back; but the defconfig never got updated. This patch adds the appropriate USB config options to the defconfigs Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> CC: Scott Wood <scottwood@freescale.com> CC: Timur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 17 10月, 2007 1 次提交
-
-
由 Anton Blanchard 提交于
When checking out the new NO_HZ support in powerpc, I noticed we never slept for more than 2 seconds. It turns out SLAB has a 2 second per cpu timer that causes this. After switching to SLUB I see some nice 4 second sleeps which is the limit on this POWER6 box (the decrementer ticks at 512MHz): slept 4.19 sec slept 4.19 sec slept 4.19 sec slept 4.19 sec slept 3.96 sec slept 3.80 sec slept 2.99 sec Since SLUB is now the default and some powerpc defconfigs already enable it, lets enable SLUB across the board for consistency. While doing this I also noticed that the maple defconfig has SLAB debugging enabled which is sure to make your box nice and slow. Fix that too. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 30 8月, 2007 1 次提交
-
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 02 7月, 2007 1 次提交
-
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 14 2月, 2007 1 次提交
-
-
由 Timur Tabi 提交于
This patch updates the defconfig for the MPC8349E-mITX. In addition to picking up changes from recent kernels, disables support for e100 (which doesn't ship with the system), turns off input devices, turns on some I2C support, turns off HW monitoring (HW not yet supported), turns off OHCI USB (not used), turns off USB gadget support (HW not yet supported), turns on DOS FS support, and turns off kernel debugging. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 26 1月, 2007 1 次提交
-
-
由 Kumar Gala 提交于
Updated MATH_EMULATION depends to be on PPC_MPC832x instead of PPC_83xx. Only the the MPC832x has no floating point unit in the core. Updated the other 83xx defconfigs that got math emulation turned on incorrectly. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 22 1月, 2007 1 次提交
-
-
由 Paul Mackerras 提交于
Mostly took the defaults, except tried to get the netfilter options more or less as they were before. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 16 10月, 2006 1 次提交
-
-
由 Timur Tabi 提交于
The default configuration file for the MPC8349E-mITX reference board, mpc834x_itx_defconfig, did not include support for DOS partition table types. This support is necessary because the hard drive that comes with the ITX is formatted with this partition table type. Without this config option, no partitions on the drive can be mounted. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 26 9月, 2006 2 次提交
-
-
由 Olaf Hering 提交于
Update defconfig files after libata .config breakage sed -i 's/CONFIG_SCSI_SATA_/CONFIG_SATA_/;s/CONFIG_SCSI_SATA/CONFIG_ATA/' arch/powerpc/configs/*g Signed-off-by: NOlaf Hering <olaf@aepfle.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kim Phillips 提交于
update mpc8349_itx_defconfig and turn off some debug settings Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 10 9月, 2006 1 次提交
-
-
由 Paul Mackerras 提交于
Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 04 7月, 2006 1 次提交
-
-
由 Kim Phillips 提交于
Provide default configuration for the Freescale MPC8349E-mITX board, including the on-board 16MB flash. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 21 4月, 2006 1 次提交
-
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 29 3月, 2006 1 次提交
-
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Add ixp23xx defconfig. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 1月, 2006 1 次提交
-
-
由 Russell King 提交于
EPXA10DB has gone, no need to keep the symbol in the defconfigs. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 05 1月, 2006 1 次提交
-
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> --- Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 02 11月, 2005 1 次提交
-
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena CONFIG_MACH_GTWX5715 hardcodes the machine type in head-xscale.S so we can no longer boot on any other machine types. The proper fix would be to remove the hardcoding, but that machine is an off-the-shelf system and most users won't have access to the bootloader. :( Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 27 9月, 2005 1 次提交
-
-
由 Vincent Sanders 提交于
Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: NVincent Sanders <vince@arm.linux.org.uk> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-