- 21 1月, 2011 1 次提交
-
-
由 David Rientjes 提交于
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NDavid Woodhouse <david.woodhouse@intel.com> Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 11月, 2010 1 次提交
-
-
由 Victor Gallardo 提交于
- Add Clock Power Management (CPM) node to dts tree - Add idle-doze entry in CPM node - Add standby entry in CPM node - Add PM and SUSPEND support by default in defconfig - Remove UART2 and UART3 as they are unused, this will allow CPM to put unused-units (UART2 and UART3) to sleep. Signed-off-by: NVictor Gallardo <vgallardo@apm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 13 10月, 2010 1 次提交
-
-
由 Tirumala Marri 提交于
This patch adds CPU, device tree, defconfig and bluestone board support for APM821xx SoC. Signed-off-by: NTirumala R Marri <tmarri@apm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 09 8月, 2010 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This trims all our defconfigs using make savedefconfig Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 15 6月, 2010 1 次提交
-
-
由 Grant Likely 提交于
Acked-by: NGrant Likely <grant.likely@secretlab.ca> On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote: CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not be required for any distro in the last 3 or 4 years, so disable it. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 26 5月, 2010 1 次提交
-
-
由 Anatolij Gustschin 提交于
Enables SM502 frame buffer and framebuffer console in the default config file Signed-off-by: NAnatolij Gustschin <agust@denx.de> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 12 5月, 2010 1 次提交
-
-
由 Stefan Roese 提交于
ICON is based on the AppliedMicro 440SPe. It is equipped with 64MByte NOR FLASH, SODIMM, Gigabit ethernet, SM502 on PCI(X), LSI SAS1068E on PCIe0 and custom FPGA on PCIe1. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 05 5月, 2010 1 次提交
-
-
由 Dave Kleikamp 提交于
A defconfig for the IBM ISS 476 simulator Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 10 2月, 2010 1 次提交
-
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 04 1月, 2010 1 次提交
-
-
由 Josh Boyer 提交于
Update the 44x defconfig files for 2.6.33 Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 31 8月, 2009 2 次提交
-
-
由 fkan@amcc.com 提交于
This patch adds support for the AMCC (AppliedMicro) PPC460SX Eiger evaluation board. Signed-off-by: NTai Tri Nguyen <ttnguyen@amcc.com> Acked-by: NFeng Kan <fkan@amcc.com> Acked-by: NTirumala Marri <tmarri@amcc.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Stefan Roese 提交于
This patch adds NOR MTD support and I2C HWMON support for the AD7414 to the AMCC Arches defconfig. Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 20 8月, 2009 1 次提交
-
-
由 Stefan Roese 提交于
This patch adds support for the following devices to the Canyonlands defconfig file: - NOR FLASH - PPC4xx NAND controller (NDFC) - I2C RTC (M41T80) Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 06 7月, 2009 1 次提交
-
-
由 Sean MacLennan 提交于
* Enable GPIO LEDS and LED triggers * Move to SLUB * Enable HOTPLUG * Enable timestamps on printks * Enable UBIFS * Enable in-kernel config Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 04 6月, 2009 2 次提交
-
-
由 Stefan Roese 提交于
Now that the 4xx NAND driver is available again in arch/powerpc, let's enable it on Sequoia. This patch also disables the early debug messages (CONFIG_PPC_EARLY_DEBUG) in the Sequoia defconfig. Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Josh Boyer 提交于
The single board defconfig files were missed during the cleanup of CONFIG_PCI_LEGACY in the multi-board config files. This disables the option for the single board configs, as it isn't used by anything for these boards. Reported-by: NCheng Renquan <crquan@gmail.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 01 3月, 2009 1 次提交
-
-
由 Grant Likely 提交于
Virtex FPGA designs have two serial port logic cores to choose from; the simple uartlite, and the full featured uart16550. Both cores are in common use so the defconfig should support both of them. Currently only console on uartlite is supported in the defconfig. This patch adds console support for the 16550 core. The Virtex reference designs do not work without this patch. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 15 2月, 2009 2 次提交
-
-
由 Madhulika Madishetty 提交于
This patch contains initial framework for the AMCC Redwood board. Signed-off-by: NMadhulika Madishetty <mmadishetty@amcc.com> Signed-off-by: NTirumala Marri <tmarri@amcc.com> Signed-off-by: NFeng Kan <fkan@amcc.com> Signed-off-by: NVidhyananth Venkatasamy <vvenkatasamy@amcc.com> Signed-off-by: NPreetesh Parekh <pparekh@amcc.com> Acked-by: NLoc Ho <lho@amcc.com> Acked-by: NFeng Kan <fkan@amcc.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Benjamin Herrenschmidt 提交于
This adds the device-tree entries for a handful of devices on the Canyonlands board, such as the EHCI and OHCI controllers, the real time clock and the AD7414 thermal monitor. I also updated the defconfig to enable various options related to these devices. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 27 1月, 2009 1 次提交
-
-
由 Jean Delvare 提交于
Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
-
- 23 1月, 2009 1 次提交
-
-
由 Josh Boyer 提交于
Update the 44x defconfigs for 2.6.29-rc2 Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 15 11月, 2008 1 次提交
-
-
由 Grant Likely 提交于
Update defconfigs for running on Xilinx Virtex platforms Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 31 10月, 2008 1 次提交
-
-
由 Josh Boyer 提交于
Update the PowerPC 44x defconfigs for 2.6.28 Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 03 10月, 2008 1 次提交
-
-
由 Victor Gallardo 提交于
Add a defconfig for the AMCC Arches evaluation board Signed-off-by: NVictor Gallardo <vgallardo@amcc.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 06 8月, 2008 1 次提交
-
-
由 Josh Boyer 提交于
Update the defconfig files for 4xx boards. This also makes the mutli-board defconfigs a bit more useful by enabling some of the more common modules. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 04 7月, 2008 1 次提交
-
-
由 John Linn 提交于
This defconfig file is specific to Xilinx Virtex 5 FXT platform. Signed-off-by: NJohn Linn <john.linn@xilinx.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 11 6月, 2008 2 次提交
-
-
由 Giuseppe Coviello 提交于
The Sam440ep is an high customizable general purpose mini-itx board, based on the AMCC 440EP and with a LatticeXP FPGA onboard. It's poduced by ACube Systems Srl (Bassano del Grappa, Italy), http://www.acube-systems.biz. Signed-off-by: NGiuseppe Coviello <gicoviello@gmail.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Imre Kaloz 提交于
Add support for the NOR flash found on the AMCC Taishan Board and enable MTD support in the defconfig. Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Acked-by: NStefan Roese <sr@denx.de> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 15 4月, 2008 1 次提交
-
-
由 Josh Boyer 提交于
Board specific defconfigs are useful, however with the ability to do multi-board defconfigs they aren't needed in the top level configs directory. Move the 4xx board specific defconfigs to individual directories under arch/powerpc/configs. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-