This adds a driver for the usb power_supply bits of the axp20x PMICs.

I initially started writing my own driver, before coming aware of
Bruno Prémont's excellent earlier RFC with a driver for this.

My driver was lacking CURRENT_MAX and VOLTAGE_MIN support Bruno's
drvier has, so I've copied the code for those from his driver.

Note that the AC-power-supply and battery charger bits will need separate
drivers. Each one needs its own devictree child-node so that other
devicetree nodes can reference the right power-supply, and thus each one
will get its own mfd-cell / platform_device and platform-driver.

Cc: Bruno Prémont <bonbons@linux-vserver.org>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Based on the datasheet found here:
http://www.richtek.com/download_ds.jsp?p=RT9455Signed-off-by: NAnda-Maria Nicolae <anda-maria.nicolae@intel.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

This patch adds new power supply charger driver support
for X-Power AXP288 PMIC integrated charger.

This driver interfaces with the axp20x mfd driver as a cell
and listens to extcon cable events for setting up charging.
Signed-off-by: NRamakrishna Pallala <ramakrishna.pallala@intel.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

More details about the chip can be found here:
http://www.ti.com/product/bq25890Signed-off-by: NLaurentiu Palcu <laurentiu.palcu@intel.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Based on the datasheet found here:
http://www.ti.com/lit/ds/symlink/bq24257.pdfSigned-off-by: NLaurentiu Palcu <laurentiu.palcu@intel.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

New power_supply driver at driver/power which interfaces with the
axp20x mfd driver as a cell. Provides battery info, monitors for
changes, and generates alerts on temperature and capacity issues
Signed-off-by: NTodd Brandt <todd.e.brandt@linux.intel.com>
Acked-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Use subdir-ccflags-* instead of ccflags-* to inherit the debug
settings from Kconfig when traversing subdirectories.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

This patch adds support for DA9150 Charger & Fuel-Gauge IC Charger.
Signed-off-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Both the LTC2941 and LTC2943 measure battery capacity.
The LTC2943 is compatible with the LTC2941, it adds voltage and
temperature monitoring, and uses a slightly different conversion
formula for the charge counter.

To avoid confusion with e.g. the LTC2945, the driver is called
LTC2941 instead of LTC294X.

v2: Fix units of measurement: uV, uA and centidegrees.
v3: Correctly set configuration register. Allow negative values
    for the sense resistor.
v4: Run checkpatch.pl and fix all errors and warnings.
v5: Prefix "lltc," to devicetree properties.
Signed-off-by: NMike Looijmans <mike.looijmans@topic.nl>
[ removed .owner field ]
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Add new driver for Maxim 77693 switch-mode charger (part of max77693
MFD driver) providing power supply class information to userspace.

The charger has +20V tolerant input. Current input can be set from 0 to
2.58 A. The charger can deliver up to 2.1 A to the battery or 3.5 A to
the system (when supplying additional current from battery to system).

The driver is configured through DTS (battery and system related
settings) and sysfs entries (timers and top-off charging threshold).
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

This patch adds device driver of Richtek PMIC.
The driver support battery fuel gauge. Fuel gauge calculates and determines the
battery state of charge (SOC) according to battery open circuit voltage (OCV).
Also, this driver provides battery average voltage, voltage and battery present
property.

Cc: Sebastian Reichel <sre@kernel.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NBeomho Seo <beomho.seo@samsung.com>
Acked-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

This adds a driver for reading the battery status of the
battery connected to the Atmel microcontroller on the
iPAQ h3xxx series.

Based on a driver from handhelds.org 2.6.21 kernel, written
by Alessandro GARDICH.
Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

MAX14577 chip is a multi-function device which includes MUIC, charger and
voltage regulator. The driver is located in drivers/mfd.

This patch supports battery charging control of MAX14577 chip and provides
power supply class information to userspace.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NAnton Vorontsov <anton@enomsg.org>

Adds support for the bq24735 charger chipset. The bq24735 is a
high-efficiency, synchronous battery charger.

It allows control of the charging current, input current, and the charger
voltage DAC's through SMBus.
Signed-off-by: NDarbha Sriharsha <dsriharsha@nvidia.com>
Signed-off-by: NRhyland Klein <rklein@nvidia.com>
Thanks-to: Stephen Warren <swarren@wwwdotorg.org>
Thanks-to: Thierry Reding <thierry.reding@gmail.com>
Thanks-to: Manish Badarkhe <badarkhe.manish@gmail.com>
Signed-off-by: NAnton Vorontsov <anton@enomsg.org>

This driver is used and tested on gta04 phone. It's using twl4030_madc
(similar to rx51 existing driver). Driver also implement charging and
discharging calibration data so user can define ranges and level.
Signed-off-by: NMarek Belisko <marek@goldelico.com>
Signed-off-by: NLukas Märdian <lukas@goldelico.com>
Signed-off-by: NAnton Vorontsov <anton@enomsg.org>

Add driver support for the Texas Instruments BQ24190 battery charger.
Some of the information provided by the device is about the charger and
other information is about the battery so create two power_supply objects
(one for each) and provide the appropriate information for each one.

The device has many fields that go beyond what is reasonable to report or
modify using the existing 'POWER_SUPPLY_PROP_*' properties so the driver
exports the register fields via sysfs.  They are prefixed by 'f_' (for
'field') to make it easier to distinguish between a register field and a
"normal" sysfs file exported by the power_supply infrastructure.
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NAnton Vorontsov <anton@enomsg.org>

This patch adds support for the tps65090 charger driver. This driver is
responsible for controlling the charger aspect of the tps65090 mfd.
Currently, this mainly consists of turning on and off the charger, but
some features of the charger can be supported through this driver
including:

- Enable Auto Recharge based on Battery voltage
- Fast Charge Safety Timer
- Maximum battery discharge current
- Maximum battery adapter current
- Enable External Charge
- Disable charging termination based on low charger current (supported)

Once the driver is accepted, later patches can add support for the
features above which are not yet supported.

Based on work by:

  Syed Rafiuddin <srafiuddin@nvidia.com>
  Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NAnton Vorontsov <anton@enomsg.org>

The PM2301 Charger should always be available when using the AB8500
Battery Management system, we're ensuring this will be the case.
Signed-off-by: NMarcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NHakan BERG <hakan.berg@stericsson.com>
Reviewed-by: NMian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com>

Add the emulated power driver for the Goldfish platform.

This folds together the code from the Google tree, Jun Nakajima's cleanups
and x86 porting work, and then a tidy up to pass checkpatch.
Signed-off-by: NMike A. Chan <mikechan@google.com>
[cleanup and x86 support]
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NYunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: NXiaohui Xin <xiaohui.xin@intel.com>
Signed-off-by: NJun Nakajima <jun.nakajima@intel.com>
Signed-off-by: NBruce Beare <bruce.j.beare@intel.com>
[ported to 3.4]
Signed-off-by: NTom Keel <thomas.keel@intel.com>
[ported to 3.7 and final tidy]
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NAnton Vorontsov <anton@enomsg.org>

AC charger driver for the DB9540 based platforms.
Signed-off-by: NRajkumar Kasirajan <rajkumar.kasirajan@stericsson.com>
Signed-off-by: NLoic Pallardy <loic.pallardy@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NMichel JAOUEN <michel.jaouen@stericsson.com>
Tested-by: NMichel JAOUEN <michel.jaouen@stericsson.com>

ab8500_fg driver prepares instance list of fuelgauge which is required by
btemp driver for battery identification. So make sure that ab8500
fuelgauge list is ready before btemp driver starts.
Signed-off-by: NRajanikanth H.V <rajanikanth.hv@stericsson.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NAnton Vorontsov <anton@enomsg.org>

property, battery-type shall be one of supported technology type
instead blank
- refer: Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
	for the list supported types
- this patch appends to ab8500 bm devs DT binding patch set
	ref: commit-id e0f1abeb
		git://git.infradead.org/battery-2.6.git
- promote ab8500_fg probe to happen before ab8500_btemp probe as
	btemp driver depends on fuelgauge list,
	ref: ab8500_fg_get(...)
Signed-off-by: NRajanikanth H.V <rajanikanth.hv@stericsson.com>

Given appropriate devicetree bindings, this driver registers a
pm_power_off function to set a GPIO line high/low to power down
your board.
Signed-off-by: NJamie Lentin <jm@lentin.co.uk>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NSimon Baatz <gmbnomis@gmail.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

- This patch adds device tree support for fuelgauge driver
- optimize bm devices platform_data usage and of_probe(...)
  Note: of_probe() routine for battery managed devices is made
  common across all bm drivers.
- test status:
  - interrupt numbers assigned differs between legacy and FDT mode.
Signed-off-by: NRajanikanth H.V <rajanikanth.hv@stericsson.com>
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>

This commit adds Kconfig and Makefile entries so that we could actually
build the driver.
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

This driver exporting battery design capacity, temperature and voltage for
battery in Nokia RX-51. This driver is needed for open source battery
management on Nokia RX-51 (N900).
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>

Driver to allow use of the ADC drivers supported by the IIO
subsystem for battery status monitoring. Connecting this
driver to the relevant IIO device requires registration of
the appropriate iio_map structure array by the IIO device
driver (usually from platform data).  If specified the driver
will also make use of a gpio to provide interrupt driven
notification that the battery is fully charged.

In last version:
Addressed concerns raised by lars:
a. made the adc_bat per device.
b. get the IIO channel using hardcoded channel names.
c. Minor issues related to gpio_is_valid and some code
   refactoring.

In V1:
Addressed concerns raised by Anton:
a. changed the struct name to gab(generic adc battery).
b. Added some functions to neaten the code.
c. Some minor coding guidelines changes.
d. Used the latest function introduce by lars:
   iio_read_channel_processed to streamline the code.

In V2:
Addressed concerns by lars:
a. No need of allocating memory for channels.Make it array.
b. Code restructring, coding style and following kernel guidelines changes
   suggested by him.

In V3:
Addressed conerns by Anton:
a. Added the copyright.
b. Coding guidelines changes suggested by him.
c. Added Makefile and Kconfig
Signed-off-by: Nanish kumar <anish198519851985@gmail.com>
Acked-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

There are charger and battery measurement feature for 88pm860x PMIC.

For charger, it can support pre-charge with small current when battery is
nearly exausted and then changed into fast-charge with CC&CV mode.

For battery monitor, it can support battery measurement such as
vbat,vsys,vchg and ibat etc,it can aslo accumulating the Coulomb value
charged or discharged from battery based on Conlomb Counter, we use it
to estimate battery capacity.
Signed-off-by: NJett.Zhou <jtzhou@marvell.com>
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>

TI LP8788 PMU supports regulators, battery charger, RTC, ADC, backlight
driver and current sinks.

This patch supports the charger operations including the charger
interrupt handling.

The LP8788 charger driver provides configurable platform data.  The
charger platform data includes ADC input ID, maximum battery voltage,
charging parameters and etc.

The ADC input is used for getting the battery voltage and temperature.
Charging parameters are used for updating the charger operations such
like setting charging current and setting End-of-charge conditions.

When the charging interrupt occurs, power supply uevents are generated
in order to update the user-space information.  For platform specific
charger action, the charger_event() function can be used in the
platform side.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>

After a clean-up of the interfaces the OMAP Smartreflex IP driver is now a
generic driver. Move it to drivers/power/avs/.

The build is controlled by the following Kconfig options:
 . CONFIG_POWER_AVS: general knob for Adaptive Voltage Scaling support,
 . CONFIG_POWER_AVS_OMAP: AVS(Adaptive Voltage Scaling)
   support on OMAP containing the version 1 or version 2 of the SmartReflex IP,
 . CONFIG_POWER_AVS_OMAP_CLASS3: Class 3 implementation of Smartreflex.
Signed-off-by: NJean Pihet <j-pihet@ti.com>
Signed-off-by: NJ Keerthy <j-keerthy@ti.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NKevin Hilman <khilman@ti.com>

This driver is responsible for battery detection, obtaining battery
temperature and monitor the battery temperature by taking precautionary
measurements when battery temperature goes beyond or below the thresholds.
Signed-off-by: NArun Murthy <arun.murthy@stericsson.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>

Driver support for the Summit I²C battery charger. This is used in some
Intel devices.
Signed-off-by: NBruce E. Robertson <bruce.e.robertson@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>

Signed-off-by: NRenata Sayakhova <rsayakhova@gmail.com>
Acked-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver for DA9052 battery charger. This driver depends on DA9052 MFD core
dirver for definitions and methods.

This patch is functionally tested on Samsung SMDKV6410.
Signed-off-by: NDavid Dajun Chen <dchen@diasemi.com>
Signed-off-by: NAshish Jangam <ashish.jangam@kpitcummins.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

This driver for the bq20z75 implemented the register spec defined
by the SBS standard. As this is not unique to this the TI part this
was originally written for, we can generalize this driver to
show its support for any SBS compliant battery.
Signed-off-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

National Semiconductor LP8727 is the battery charger with Micro/Mini
USB interface. This IC includes below functions:

- I2C interface for accessing user registers
- Single input Li-Ion battery charger
- Charger input ID detection from Micro/Mini USB
- Multiplexing switches on USB, UART
Signed-off-by: NWoogyom Kim <milo.kim@ti.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

Because battery health monitoring should be done even when suspended,
it needs to wake up and suspend periodically. Thus, userspace battery
monitoring may incur too much overhead; every device and task is woken
up periodically. Charger Manager uses suspend-again to provide
in-suspend monitoring.

This patch allows to monitor battery health in-suspend state.
Signed-off-by: NDonggeun Kim <dg77.kim@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

This patch supports power supply APIs for MAX8998/LP3974.
Signed-off-by: NDonggeun Kim <dg77.kim@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungMin Park <kyungmin.park@samsung.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

MAX8997/8966 chip is a multi-function device which includes
PMIC, RTC, Fuel Gauge, MUIC, Haptic, Flash control, and
Battery charging control.
The driver for it is located at drivers/mfd.

This patch supports battery charging control of MAX8997/8966 chip and
provides power supply class information to userspace.
Signed-off-by: NDonggeun Kim <dg77.kim@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungMin Park <kyungmin.park@samsung.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

Add support for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC.

It was suggested to combine this functionality with the current ds2782
driver.  Unfortunately, I'm unable to commit the time to refactoring this
driver to that extent and I don't have a platform with the ds2782 part to
validate that there are no regression issues by adding this functionality.

[akpm@linux-foundation.org: use min_t()]
Signed-off-by: NClifton Barnes <cabarnes@indesign-llc.com>
Tested-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>