Currently, the fc transport invokes nvme_fc_error_recovery() on every
io in which the transport detects an error.  Which means:
a) it's really noisy on large io loads that all get hit by a link down.
b) we repeatively call nvme_stop_queues() even though queues are
 stopped upon the first error or as first steps of reset_work.

Correct by:
Errors are only meaningful if the controller is in the LIVE state.
Thus, enact the reset_work only if LIVE. If called repeatively, state
will have already transitioned.
There's no need to stop the queues here. Let the first steps of
reset_work do the queue stopping.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

if a nvme command is issued with an opcode that is not supported by
the target (example: opcode 21 - detach namespace), the target
crashes due to a null pointer.

nvmet_req_init() detects the bad opcode and immediately calls the nvme
command done routine with an error status, allowing the transport to
send the response. However, the FC transport was aborting the command
on error, so the abort freed the lldd point, but the rsp transmit path
referenced it psot the free.

Fix by removing the abort call on nvmet_req_init() failure.
The completion response will be sent with an error status code.

As the completion path will terminate the io, ensure the data_sg
lists show an unused state so that teardown paths are successful.
Signed-off-by: NPaul Ely <Paul.Ely@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If a controller connection is attempted (say to a subsystem that
does not exist), the first attempt errors out.  If another connect
is attempted, it crashes.

Issue is the prior controller has yet execute it's final put, thus
its still on lists. However, opts points on it have been cleared, thus
causing the crash if they are referenced.

Fix is to add the missing put after the nvme_uninit_ctrl() call on
the attachment failure.
Signed-off-by: NPaul Ely <Paul.Ely@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Per the recommendation by Sagi on:
http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html

Wait for io aborts to complete wait converted from msleep look to
using a struct completion.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Current fc transport code, on io termination, is calling
nvme_cleanup_cmd() followed by the transport dma unmap routine
which also calls nvme_cleanup_cmd(). Which means two kfrees occur
on the same address, raising havoc. This resulted in odd data errors,
effectively corruption..

Fix by removing the extraneous double calls. Call now occurs only in
teardown paths and as part of dma unmap routine.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

NVMe 1.2.1 or later requires controllers to provide a subsystem NQN in the
Identify controller data structures.  Use this NQN for the subsysnqn
sysfs attribute by storing it in the nvme_ctrl structure after verifying
it.  For older controllers we generate a "fake" NQN per non-normative
text in the NVMe 1.3 spec.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

While a NVMe Namespace is somewhat similar to a SCSI Logical Unit (and not
a Logical Unit Number anyway) there are subtile differences.  Remove the
misleading comment.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grmberg.me>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A user reports APST is enabled, even when the NVMe is quirked or with
option "default_ps_max_latency_us=0".

The current logic will not set APST if the device is quirked. But the
NVMe in question will enable APST automatically.

Separate the logic "apst is supported" and "to enable apst", so we can
use the latter one to explicitly disable APST at initialiaztion.

BugLink: https://bugs.launchpad.net/bugs/1699004Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

No need to differentiate fabrics from pci/loop, also lower
it to 32 as we don't really need 256 inflight admin commands.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently we have no way to define a stable host-id but always use the one
which is randomly generated when we add the host or use the default host.

Provide a "hostid=%s" for user-space to pass in a persistent host-id which
overrides the randomly generated one.
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The SCSI-to-NVMe translations were added to assist storage applications
utilizing SG_IO transitioning to NVMe. It was always recommended,
however, to use native NVMe for device management as too much is lost
in translation and the maintenance burden in keeping this kludgey
layer around has been neglected such that much of the translations are
completely broken.

This patch removes SG_IO handling from NVMe to avoid any confusion
regarding maintenance support for this interface. The config option for
NVMe SCSI emulation has been disabled by default since 4.5. The driver
has supported native nvme user commands since the beginning, and native
tooling is publicly available for use or as reference for anyone writing
their own tools, so there's no excuse for hanging onto a broken crutch.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Acked-by: NJens Axboe <axboe@kernel.dk>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NGuan Junxiong <guanjunxiong@huawei.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Given that the code is simple enough it seems better
then passing a tag by reference for each call site, also
we can now get rid of __nvme_process_cq.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Also, maintain a consumed counter to rely on for doorbell and
cqe_seen update instead of directly relying on the cq head and phase.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Makes the code slightly more readable.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Nice abstraction of the actual mechanics of how to do it.
Note the change that we call it after we assign nvmeq->cq_head
to avoid passing it.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Some architectures (at least PPC) doesn't like get/put_user with
64-bit types on a 32-bit system. Use the variably sized copy
to/from user variants instead.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Fixes: c75b1d94 ("fs: add fcntl() interface for setting/getting write life time hints")
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Drop static on a local variable, when the variable is initialized before
any use, on every possible execution path through the function.  The
static has no benefit, and dropping it reduces the code size.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@bad exists@
position p;
identifier x;
type T;
@@

static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@

-static
 T x@p;
 ... when != x
     when strict
?x = e;
// </smpl>

The change in code size is indicates by the following output from the size
command.

before:
   text    data     bss     dec     hex filename
  67299    2291    1056   70646   113f6 drivers/block/drbd/drbd_nl.o

after:
   text    data     bss     dec     hex filename
  67283    2291    1056   70630   113e6 drivers/block/drbd/drbd_nl.o
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NRoland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This commit fixes a bug triggered by a non-trivial sequence of
events. These events are briefly described in the next two
paragraphs. The impatiens, or those who are familiar with queue
merging and splitting, can jump directly to the last paragraph.

On each I/O-request arrival for a shared bfq_queue, i.e., for a
bfq_queue that is the result of the merge of two or more bfq_queues,
BFQ checks whether the shared bfq_queue has become seeky (i.e., if too
many random I/O requests have arrived for the bfq_queue; if the device
is non rotational, then random requests must be also small for the
bfq_queue to be tagged as seeky). If the shared bfq_queue is actually
detected as seeky, then a split occurs: the bfq I/O context of the
process that has issued the request is redirected from the shared
bfq_queue to a new non-shared bfq_queue. As a degenerate case, if the
shared bfq_queue actually happens to be shared only by one process
(because of previous splits), then no new bfq_queue is created: the
state of the shared bfq_queue is just changed from shared to non
shared.

Regardless of whether a brand new non-shared bfq_queue is created, or
the pre-existing shared bfq_queue is just turned into a non-shared
bfq_queue, several parameters of the non-shared bfq_queue are set
(restored) to the original values they had when the bfq_queue
associated with the bfq I/O context of the process (that has just
issued an I/O request) was merged with the shared bfq_queue. One of
these parameters is the weight-raising state.

If, on the split of a shared bfq_queue,
1) a pre-existing shared bfq_queue is turned into a non-shared
bfq_queue;
2) the previously shared bfq_queue happens to be busy;
3) the weight-raising state of the previously shared bfq_queue happens
to change;
the number of weight-raised busy queues changes. The field
wr_busy_queues must then be updated accordingly, but such an update
was missing. This commit adds the missing update.
Reported-by: NLuca Miccio <lucmiccio@gmail.com>
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

BLK_BOUNCE_ANY is the defauly now, so the call is superflous.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now all queues allocators come without abounce limit by default,
dm doesn't have to override this anymore.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Instead move it to the callers.  Those that either don't use bio_data() or
page_address() or are specific to architectures that do not support highmem
are skipped.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

And just move it into scsi_transport_sas which needs it due to low-level
drivers directly derferencing bio_data, and into blk_init_queue_node,
which will need a further push into the callers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For historical reasons we default to bouncing highmem pages for all block
queues.  But the blk-mq drivers are easy to audit to ensure that we don't
need this - scsi and mtip32xx set explicit limits and everyone else doesn't
have any particular ones.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We only call blk_queue_bounce for request-based drivers, so stop messing
with it for make_request based drivers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Only used inside the bounce code, and opencoding it makes it more obvious
what is going on.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This makes moves the knowledge about bouncing out of the callers into the
block core (just like we do for the normal I/O path), and allows to unexport
blk_queue_bounce.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

pktcdvd is a make_request based stacking driver and thus doesn't have any
addressing limits on it's own.  It also doesn't use bio_data() or
page_address(), so it doesn't need a lowmem bounce either.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This adds support for Directives in NVMe, particular for the Streams
directive. Support for Directives is a new feature in NVMe 1.3. It
allows a user to pass in information about where to store the data, so
that it the device can do so most effiently. If an application is
managing and writing data with different life times, mixing differently
retentioned data onto the same locations on flash can cause write
amplification to grow. This, in turn, will reduce performance and life
time of the device.
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Reviewed-by: NAndreas Dilger <adilger@dilger.ca>
Signed-off-by: NChris Mason <clm@fb.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Reviewed-by: NAndreas Dilger <adilger@dilger.ca>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Reviewed-by: NAndreas Dilger <adilger@dilger.ca>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Reviewed-by: NAndreas Dilger <adilger@dilger.ca>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Reviewed-by: NAndreas Dilger <adilger@dilger.ca>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Useful to verify that things are working the way they should.
Reading the file will return number of kb written with each
write hint. Writing the file will reset the statistics. No care
is taken to ensure that we don't race on updates.

Drivers will write to q->write_hints[] if they handle a given
write hint.
Reviewed-by: NAndreas Dilger <adilger@dilger.ca>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

No functional changes in this patch, we just use up some holes
in the bio and request structures to define a write hint that
we psas down the stack.

Ensure that we don't merge requests that have different life time
hints assigned to them, and that we inherit the write hint when
cloning a bio.
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Define a set of write life time hints:

RWH_WRITE_LIFE_NOT_SET	No hint information set
RWH_WRITE_LIFE_NONE	No hints about write life time
RWH_WRITE_LIFE_SHORT	Data written has a short life time
RWH_WRITE_LIFE_MEDIUM	Data written has a medium life time
RWH_WRITE_LIFE_LONG	Data written has a long life time
RWH_WRITE_LIFE_EXTREME	Data written has an extremely long life time

The intent is for these values to be relative to each other, no
absolute meaning should be attached to these flag names.

Add an fcntl interface for querying these flags, and also for
setting them as well:

F_GET_RW_HINT		Returns the read/write hint set on the
			underlying inode.

F_SET_RW_HINT		Set one of the above write hints on the
			underlying inode.

F_GET_FILE_RW_HINT	Returns the read/write hint set on the
			file descriptor.

F_SET_FILE_RW_HINT	Set one of the above write hints on the
			file descriptor.

The user passes in a 64-bit pointer to get/set these values, and
the interface returns 0/-1 on success/error.

Sample program testing/implementing basic setting/getting of write
hints is below.

Add support for storing the write life time hint in the inode flags
and in struct file as well, and pass them to the kiocb flags. If
both a file and its corresponding inode has a write hint, then we
use the one in the file, if available. The file hint can be used
for sync/direct IO, for buffered writeback only the inode hint
is available.

This is in preparation for utilizing these hints in the block layer,
to guide on-media data placement.

/*
 * writehint.c: get or set an inode write hint
 */
 #include <stdio.h>
 #include <fcntl.h>
 #include <stdlib.h>
 #include <unistd.h>
 #include <stdbool.h>
 #include <inttypes.h>

 #ifndef F_GET_RW_HINT
 #define F_LINUX_SPECIFIC_BASE	1024
 #define F_GET_RW_HINT		(F_LINUX_SPECIFIC_BASE + 11)
 #define F_SET_RW_HINT		(F_LINUX_SPECIFIC_BASE + 12)
 #endif

static char *str[] = { "RWF_WRITE_LIFE_NOT_SET", "RWH_WRITE_LIFE_NONE",
			"RWH_WRITE_LIFE_SHORT", "RWH_WRITE_LIFE_MEDIUM",
			"RWH_WRITE_LIFE_LONG", "RWH_WRITE_LIFE_EXTREME" };

int main(int argc, char *argv[])
{
	uint64_t hint;
	int fd, ret;

	if (argc < 2) {
		fprintf(stderr, "%s: file <hint>\n", argv[0]);
		return 1;
	}

	fd = open(argv[1], O_RDONLY);
	if (fd < 0) {
		perror("open");
		return 2;
	}

	if (argc > 2) {
		hint = atoi(argv[2]);
		ret = fcntl(fd, F_SET_RW_HINT, &hint);
		if (ret < 0) {
			perror("fcntl: F_SET_RW_HINT");
			return 4;
		}
	}

	ret = fcntl(fd, F_GET_RW_HINT, &hint);
	if (ret < 0) {
		perror("fcntl: F_GET_RW_HINT");
		return 3;
	}

	printf("%s: hint %s\n", argv[1], str[hint]);
	close(fd);
	return 0;
}
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

While creating new device with NVM_DEV_CREATE if LUNs are already
allocated ioctl would return -ENOMEM which is wrong.  This patch
propagates -EBUSY from nvm_reserve_luns which is correct response.

Fixes: ade69e24 ("lightnvm: merge gennvm with core")
Reviewed-by: NFrans Klaver <fransklaver@gmail.com>
Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>