- 22 10月, 2010 8 次提交
-
-
由 Greg Ungerer 提交于
The only difference between the MMU and non-MMU versions of atomic.h is some extra support needed by ColdFire family processors. So merge this into the MMU version of atomic.h. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Greg Ungerer 提交于
There is a lot of common defines in the MMU and non-MMU variants of page.h. Factor out the common stuff into the master page.h. It still includes the underlying page_mm.h or page_no.h, but they only contain the real differences now. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Greg Ungerer 提交于
No need to have separate machdep.h files for each of the MMU and non-MMU cases. Merge them all into a single file. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Greg Ungerer 提交于
The MMU and non-MMU string.h varients (string_no.h and string_mm.h) and almost the same. Switch to using the string_mm.h one, merging in the necessary ColdFire support. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Christian Dietrich 提交于
CONFIG_SMP doesn't exist in Kconfig (for this architecure), therefore remove all references to it from the source. Signed-off-by: NChristian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Greg Ungerer 提交于
Move the definition of THREAD_SIZE from page_mm.h to thread_info_mm.h This logically associates it with the other thread definitions, and will make it easier to merge the MMU and non-MMU versions of page.h and thread_info.h. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Jeff Mahoney 提交于
This patch converts m68k to use asm-generic/ioctls.h instead of its own version. The differences between the arch-specific version and the generic version are as follows: - m68k defines its own value for FIOQSIZE, asm-generic/ioctls.h keeps it - The generic version adds TIOCSRS485 and TIOCGRS485m which are unused by any driver available on this architecture. - The generic version adds support for termiox Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Christian Dietrich 提交于
CONFIG_GG2 doesn't exist in Kconfig, therefore remove all references to it from the source. Signed-off-by: NChristian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 02 10月, 2010 1 次提交
-
-
由 Andrew Morton 提交于
Fix the warnings arch/m68k/mac/macboing.c: In function 'mac_mksound': arch/m68k/mac/macboing.c:189: warning: comparison of distinct pointer types lacks a cast arch/m68k/mac/macboing.c:211: warning: comparison of distinct pointer types lacks a cast arch/m68k/mac/macboing.c: In function 'mac_quadra_start_bell': arch/m68k/mac/macboing.c:241: warning: comparison of distinct pointer types lacks a cast arch/m68k/mac/macboing.c:263: warning: comparison of distinct pointer types lacks a cast arch/m68k/mac/macboing.c: In function 'mac_quadra_ring_bell': arch/m68k/mac/macboing.c:283: warning: comparison of distinct pointer types lacks a cast Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 9月, 2010 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NGreg Ungerer <gerg@uclinux.org>
-
- 18 8月, 2010 2 次提交
-
-
由 Jate Sujjavanich 提交于
The arch/m68k/include/asm/ide.h produces errors when the IDE driver is compiled for my 523x uClinux system under kernel. The header makes some redefines of operators not defined in the arch/m68k/include/asm/io_no.h header. There are no separate mmio and iospace defines. Signed-off-by: NJate Sujjavanich <jsujjavanich@syntech-fuelmaster.com> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 David Howells 提交于
Make do_execve() take a const filename pointer so that kernel_execve() compiles correctly on ARM: arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type This also requires the argv and envp arguments to be consted twice, once for the pointer array and once for the strings the array points to. This is because do_execve() passes a pointer to the filename (now const) to copy_strings_kernel(). A simpler alternative would be to cast the filename pointer in do_execve() when it's passed to copy_strings_kernel(). do_execve() may not change any of the strings it is passed as part of the argv or envp lists as they are some of them in .rodata, so marking these strings as const should be fine. Further kernel_execve() and sys_execve() need to be changed to match. This has been test built on x86_64, frv, arm and mips. Signed-off-by: NDavid Howells <dhowells@redhat.com> Tested-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 8月, 2010 1 次提交
-
-
由 Sam Ravnborg 提交于
Use the defconfig files generated by "make savedefconfig" for remaining defconfig files. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 14 8月, 2010 1 次提交
-
-
由 David Howells 提交于
Mark arguments to certain system calls as being const where they should be but aren't. The list includes: (*) The filename arguments of various stat syscalls, execve(), various utimes syscalls and some mount syscalls. (*) The filename arguments of some syscall helpers relating to the above. (*) The buffer argument of various write syscalls. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 8月, 2010 4 次提交
-
-
由 FUJITA Tomonori 提交于
Architectures implement dma_is_consistent() in different ways (some misinterpret the definition of API in DMA-API.txt). So it hasn't been so useful for drivers. We have only one user of the API in tree. Unlikely out-of-tree drivers use the API. Even if we fix dma_is_consistent() in some architectures, it doesn't look useful at all. It was invented long ago for some old systems that can't allocate coherent memory at all. It's better to export only APIs that are definitely necessary for drivers. Let's remove this API. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
dma_get_cache_alignment returns the minimum DMA alignment. Architectures defines it as ARCH_DMA_MINALIGN (formally ARCH_KMALLOC_MINALIGN). So we can unify dma_get_cache_alignment implementations. Note that some architectures implement dma_get_cache_alignment wrongly. dma_get_cache_alignment() should return the minimum DMA alignment. So fully-coherent architectures should return 1. This patch also fixes this issue. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
Now each architecture has the own dma_get_cache_alignment implementation. dma_get_cache_alignment returns the minimum DMA alignment. Architectures define it as ARCH_KMALLOC_MINALIGN (it's used to make sure that malloc'ed buffer is DMA-safe; the buffer doesn't share a cache with the others). So we can unify dma_get_cache_alignment implementations. This patch: dma_get_cache_alignment() needs to know if an architecture defines ARCH_KMALLOC_MINALIGN or not (needs to know if architecture has DMA alignment restriction). However, slab.h define ARCH_KMALLOC_MINALIGN if architectures doesn't define it. Let's rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN. ARCH_KMALLOC_MINALIGN is used only in the internals of slab/slob/slub (except for crypto). Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 hyc@symas.com 提交于
This patch is against the 2.6.34 source. Paraphrased from the 1989 BSD patch by David Borman @ cray.com: These are the changes needed for the kernel to support LINEMODE in the server. There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. New ioctl: TIOCSIG Generate a signal to processes in the current process group of the pty. There is a new mode for packet driver, the TIOCPKT_IOCTL bit. When packet mode is turned on in the pty, and the EXTPROC bit is set, then whenever the state of the pty is changed, the next read on the master side of the pty will have the TIOCPKT_IOCTL bit set. This allows the process on the server side of the pty to know when the state of the terminal has changed; it can then issue the appropriate ioctl to retrieve the new state. Since the original BSD patches accompanied the source code for telnet I've left that reference here, but obviously the feature is useful for any remote terminal protocol, including ssh. The corresponding feature has existed in the BSD tty driver since 1989. For historical reference, a good copy of the relevant files can be found here: http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741Signed-off-by: NHoward Chu <hyc@symas.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 10 8月, 2010 4 次提交
-
-
由 Geert Uytterhoeven 提交于
Removal of these started in 2.3.43pre3, ca. 10 years ago. Reported-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Finn Thain 提交于
Copy RTC response bytes correctly on powerbooks and duos. Thanks to Diego Cousinet who debugged this and provided me with the fix. Tested on PowerBook 190 and Duo 280c. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Reported-by: NDiego Cousinet <diego@pvco.net> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Finn Thain 提交于
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Andrea Gelmini 提交于
arch/m68k/sun3/leds.c:10: ERROR: code indent should use tabs where possible arch/m68k/sun3/leds.c:11: ERROR: space required after that ',' (ctx:VxV) Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 08 8月, 2010 1 次提交
-
-
由 FUJITA Tomonori 提交于
Architectures don't need to define ISA_DMA_THRESHOLD anymore. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NJames Bottomley <James.Bottomley@suse.de> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 03 8月, 2010 1 次提交
-
-
由 Sam Ravnborg 提交于
It is now possible to assign options to AS, CC and LD on the command line - which is only used when building modules. {A,C,LD}FLAGS_MODULE was all used both in the top-level Makefile in the arch makefiles, thus users had no way to specify additional options to AS, CC, LD when building modules without overriding the original value. Introduce a new set of variables KBUILD_{A,C,LD}FLAGS_MODULE that is used by arch specific files and free up {A,C,LD}FLAGS_MODULE so they can be assigned on the command line. All arch Makefiles that used the old variables has been updated. Note: Previously we had a MODFLAGS variable for both AS and CC. But in favour of consistency this was dropped. So in some cases arch Makefile has one assignmnet replaced by two assignmnets. Note2: MODFLAGS was not documented and is dropped without any notice. I do not expect much/any breakage from this. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin] Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [avr32] Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 27 7月, 2010 1 次提交
-
-
由 John Stultz 提交于
Now that all arches have been converted over to use generic time via clocksources or arch_gettimeoffset(), we can remove the GENERIC_TIME config option and simplify the generic code. Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> LKML-Reference: <1279068988-21864-4-git-send-email-johnstul@us.ibm.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 09 6月, 2010 1 次提交
-
-
由 Peter Zijlstra 提交于
On 64bit, local_t is of size long, and thus we make local64_t an alias. On 32bit, we fall back to atomic64_t. (architecture can provide optimized 32-bit version) (This new facility is to be used by perf events optimizations.) Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: linux-arch@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 28 5月, 2010 1 次提交
-
-
由 FUJITA Tomonori 提交于
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 5月, 2010 10 次提交
-
-
由 Geert Uytterhoeven 提交于
The A2000 TOD is an Oki MSM6242B, while the A3000 TOD is a Ricoh RP5C01. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
Acked-by: NJames Bottomley <James.Bottomley@suse.de> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
Acked-by: NJames Bottomley <James.Bottomley@suse.de> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 FUJITA Tomonori 提交于
Architectures that handle DMA-non-coherent memory need to set ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the buffer doesn't share a cache with the others. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: NPekka Enberg <penberg@cs.helsinki.fi> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 24 5月, 2010 2 次提交
-
-
由 Greg Ungerer 提交于
Remove the un-used mcfsmc.h. All ColdFire platforms that use SMC ethernet devices are platform enabled to use the smc91x driver. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
The TASK_SIZE define is used in some places as a limit on the size of the virtual address space of a process. On non-MMU systems those addresses used in comparison will be physical addresses, and they could be anywhere in the 32bit physical address space. So for !CONFIG_MMU systems set the TASK_SIZE to the maximum physical address. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
- 18 5月, 2010 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-