- 02 12月, 2006 4 次提交
-
-
由 Andrew Victor 提交于
This patch contains various updates the at91rm9200_devices.c file: * Consistent naming of resources and platform_devices. * PCMCIA/Compact Flash: Configuration of the memory controller moved out of the driver and into this file. * MMC: Enable the VCC pin (if one is configured) * MMC: Enable the internal pullups on the I/O pins. * NAND: Configuration of the memory controller moved out of the driver and into this file. * Added TWI/I2C resources. * The names of some of the CONFIG_ variables were changed. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
A number of configuration file changes. These are mainly to replace references to ARCH_AT91RM9200 and ARCH_AT91SAM9261 with the common/generic ARCH_AT91. That way we don't need to mention every specific AT91 processor explicitly. Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK boards. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
This patch adds support for the Atmel AT91SAM9261-EK board. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
This patch adds support for the Atmel AT91SAM9260-EK board. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 01 12月, 2006 15 次提交
-
-
由 Andrew Victor 提交于
This patch includes a number of small changes for integrating the AT91SAM9261 and AT91SAM0260 support. * Can only select support for one AT91 processor at a time. * Remove most of the remaining static memory mapping for the AT91RM9200. * Reserve 1Mb of memory below the IO for mapping the internal SRAM and any custom board-specific devices (ie, FPGA). * The SAM9260 has more serial ports, so increase the maximum to 7. * Define the standard chipselect addresses, and define other addresses relative to those. * CLOCK_TICK_RATE is different on the SAM926x's. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
The bits used to select the USB clocks are different on the SAM9's. Add support for the HCK clocks on the AT91SAM9261. Patch from Patrice Vilchez & Nicolas Ferre Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
This patch converts the old CONFIG_MTD_PHYSMAP_ options to the new physmap API by creating a physmap platform device for the NOR flash found on the Atmel AT91RM9200-DK and AT91RM9200-EK boards. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
This patch updates the Carmeva board support: * Specify the MMC Write-protect and Detection pins. * Add configuration of SPI devices. Patch from Peer Georgi. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Attached is a patch for at91rm9200_time.c which removes the 'BUG: soft lockup detected on CPU#0!' message when exiting suspended states. Patch from Savin Zlobec Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
This patch includes the pin initialization, resource definition and registration of the platform_devices for the SAM9260 and SAM9261 processors. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
This patch adds definitions for the new peripherals integrated in the AT91SAM9260 and AT91SAM9261 processors: ECC, LCD, RSTC, RTT, SHDWC, WDT, MATRIX, SDRAMC, SMC. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
This patch updates the drivers (and other files) which include the hardware headers. This fixes the breakage introduced in patches 3950/1 and 3951/1 (those patches were getting big). The AVR32 architecture uses the same serial driver and had its own copy of at91rm9200_pdc.h. Renamed it to at91_pdc.h Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Most of the AT91RM9200 user peripherals are also integrated into the Atmel SAM9 range of processors. This patch renames the headers from at91rm9200_xx.h to at91_xx.h to indicate they're not at91rm9200-specific. The new SAM9-specific registers and register bits have also been defined. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
The AT91RM9200 system header file (at91rm9200_sys.h) has been split into separate header files for each peripheral. This was necessary since some of the system peripherals are also used on AT91SAM9260 and AT91SAM9261. The new SAM9-specific register bits have also been defined. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
This patch adds the initial support for the newer Atmel AT91SAM9261 and AT91SAM9260 processors. The code is based on, and makes use of, the existing AT91RM9200 support. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
This patch replaces the arch_identify() in system.h with a set of cpu_is_XXX() macro's. This allows for compile-time checking of the target AT91 processor. Original patch from David Brownell. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
The external interrupt sources are different on the various AT91 processors. This patch introduces the global 'at91_extern_irq' variable that contains a bitset of the available external interrupt sources. The processor reset mechanism also differs on the various AT91 processors. This patch also adds a global 'at91_arch_reset' callback (from system.h) into the processor-specific code to perform the reset. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
This patch renames the arch/arm/mach-at91rm9200/devices.c file to at91rm9200_devices.c. The file contains AT91RM9200-specific code, so we will need separate files for the SAM9 processors. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 30 11月, 2006 5 次提交
-
-
由 Linus Torvalds 提交于
It's all good.
-
由 Francois Romieu 提交于
This changes the type of variable "i" in rtl8169_init_one() from "unsigned int" to "int". "i" is checked for < 0 later, which can never happen for "unsigned". This results in broken error handling. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3943/1: share declaration of struct pxa2xx_udc_mach_info between multiple platforms [ARM] Export smp_call_function() [ARM] Add PM_LEGACY defaults
-
由 Milan Svoboda 提交于
Move declaration of struct pxa2xx_udc_mach_info from include/asm-arm/arch-pxa/udc.h to new file include/asm-arm/mach/udc_pxa2xx.h. This allow us to use this structure with multiple platforms - pxa and ixp4xx. USB device controller used in pxa25x is the same as controller used in ixp4xx. Signed-off-by: NMilan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ralf Baechle 提交于
Otherwise CPU 0 doesn't show up in sysfs which breaks some software. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 29 11月, 2006 16 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET]: Fix MAX_HEADER setting. [NETFILTER]: ipt_REJECT: fix memory corruption [NETFILTER]: conntrack: fix refcount leak when finding expectation [NETFILTER]: ctnetlink: fix reference count leak [NETFILTER]: nf_conntrack: fix the race on assign helper to new conntrack [NETFILTER]: nfctnetlink: assign helper to newly created conntrack
-
由 David S. Miller 提交于
MAX_HEADER is either set to LL_MAX_HEADER or LL_MAX_HEADER + 48, and this is controlled by a set of CONFIG_* ifdef tests. It is trying to use LL_MAX_HEADER + 48 when any of the tunnels are enabled which set hard_header_len like this: dev->hard_header_len = LL_MAX_HEADER + sizeof(struct xxx); The correct set of tunnel drivers which do this are: ipip ip_gre ip6_tunnel sit so make the ifdef test match. Noticed by Patrick McHardy and with help from Herbert Xu. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
On devices with hard_header_len > LL_MAX_HEADER ip_route_me_harder() reallocates the skb, leading to memory corruption when using the stale tcph pointer to update the checksum. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yasuyuki Kozakai 提交于
All users of __{ip,nf}_conntrack_expect_find() don't expect that it increments the reference count of expectation. Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
When NFA_NEST exceeds the skb size the protocol reference is leaked. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yasuyuki Kozakai 提交于
The found helper cannot be assigned to conntrack after unlocking nf_conntrack_lock. This tries to find helper to assign again. Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yasuyuki Kozakai 提交于
This fixes the bug which doesn't assign helper to newly created conntrack via nf_conntrack_netlink. Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] libata: Fixup ata_sas_queuecmd to handle __ata_scsi_queuecmd failure [PATCH] ahci: AHCI mode SATA patch for Intel ICH9 [PATCH] libata: don't schedule EH on wcache on/off if old EH
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: selinux: fix dentry_open() error check
-
git://one.firstfloor.org/home/andi/git/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] x86-64: Use stricter in process stack check for unwinder [PATCH] i386: Fix compilation with UP genericarch [PATCH] x86-64: Fix warning in io_apic.c [PATCH] x86-64: work around gcc4 issue with -Os in Dwarf2 stack unwind [PATCH] x86_64: Align data segment to PAGE_SIZE boundary
-
由 Linus Torvalds 提交于
* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: [ALSA] version 1.0.13 [ALSA] snd-emu10k1: Fix capture for one variant. [ALSA] Fix hang-up at disconnection of usb-audio [ALSA] hda: fix typo for xw4400 PCI sub-ID [ALSA] hda: fix sigmatel dell system detection [ALSA] Enable stereo line input for TAS codec [ALSA] rtctimer: handle RTC interrupts with a tasklet
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix Bonito bootup message.
-
由 Dave Jones 提交于
include/scsi/libsas.h:479: error: field 'smp_req' has incomplete type include/scsi/libsas.h:480: error: field 'smp_resp' has incomplete type Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Akinobu Mita 提交于
The return value of crypto_alloc_blkcipher() should be checked by IS_ERR(). Cc: Mike Halcrow <mhalcrow@us.ibm.com> Cc: Phillip Hellewell <phillip@hellewell.homeip.net> Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Akinobu Mita 提交于
The return value of create_write_pipe()/create_read_pipe() should be checked by IS_ERR(). Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Joakim Tjernlund 提交于
When we sleep and wait for a suspended operation to be resumed, go back and check until it's ready -- don't just continue after the first time we're woken. This can cause file system corruption. Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-