- 23 3月, 2013 40 次提交
-
-
由 Silviu-Mihai Popescu 提交于
This uses the resource_size() function instead of explicit computation. Signed-off-by: NSilviu-Mihai Popescu <silviupopescu1990@gmail.com> Acked-by: NLad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Frank Schaefer 提交于
Previously, this has been done implicitly for video device nodes by calling set_input() (which calls audio_input() and also modified the mute setting). Since input and mute setting are now untangled (as much as possible), we need to apply the mute setting with an explicit call to audio_mute(). Also apply the mute setting when the radio device node gets opened. Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Frank Schaefer 提交于
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Frank Schaefer 提交于
Split function audio_mux(): move the mute setting part to function audio_mute() and the input setting part to function audio_input(). Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Frank Schaefer 提交于
Move the GPIO part of function audio_mux() to a separate function audio_mux_gpio(). This prepares the code for the next patch which will separate mute and input setting. Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Frank Schaefer 提交于
'audio_input' better describes the meaning of this field. Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Frank Schaefer 提交于
We can't and do not save the mute setting in function audio_mux(), so we should also not save the input in this function for consistency. Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Frank Schaefer 提交于
There are cases where we want to call audio_mux() without changing the value of the v4l2 mute control, for example - mute mute on last close - mute on device probing Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Frank Schaefer 提交于
[media] bttv: audio_mux(): use a local variable "gpio_mute" instead of modifying the function parameter "mute" Function audio_mux() actually deals with two types of mute: gpio mute and subdevice muting. This patch claryfies the meaning of these values, but mainly prepares the code for the next patch. Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Wei Yongjun 提交于
In case of error, the function clk_get() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: NLad, Prabhakar <prabhakar.csengg@gmail.com> Reviewed-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 David Härdeman 提交于
store_protocols() treats dev->rc_map.rc_type as a bitmap which is wrong for two reasons. First of all, it is pretty bogus to change the protocol type of the keymap just because the hardware has been asked to decode a different protocol. Second, dev->rc_map.rc_type is an enum (i.e. a single protocol) as pointed out by James Hogan <james.hogan@imgtec.com>. Fix both issues by introducing a separate enabled_protocols member to struct rc_dev. Signed-off-by: NDavid Härdeman <david@hardeman.nu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sachin Kamat 提交于
ts2020.h was included twice. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jose Alberto Reguero 提交于
This patch enable dual tuner for Avermedia Twinstar. Signed-off-by: NJose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The dv_preset API is deprecated and is replaced by the much improved dv_timings API. Remove the dv_preset support from this driver as this will allow us to remove the dv_preset API altogether (s5p-tv being the last user of this code). Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Tested-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Acked-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The dv_preset API is deprecated and is replaced by the much improved dv_timings API. Remove the dv_preset support from this driver as this will allow us to remove the dv_preset API altogether (s5p-tv being the last user of this code). Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Tested-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Acked-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The dv_preset API is deprecated and is replaced by the much improved dv_timings API. Remove the dv_preset support from this driver as this will allow us to remove the dv_preset API altogether (s5p-tv being the last user of this code). Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Tested-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Acked-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
This just adds dv_timings support without modifying existing dv_preset support. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Tested-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Acked-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
This just adds dv_timings support without modifying existing dv_preset support. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Tested-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Acked-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
This just adds dv_timings support without modifying existing dv_preset support, although I had to refactor a little bit in order to share hdmiphy_find_conf() between the preset and timings code. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Tested-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Acked-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Wei Yongjun 提交于
usb_free_coherent() is safe with NULL addr and this check is not required. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean Delvare 提交于
Last parameter of function GetLockStatus() isn't used so drop it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Lad, Prabhakar 提交于
export the symbols which are used by two modules vpif_capture and vpif_display. renamed "ch_params" to "vpif_ch_params" so as to avoid name collision. This patch fixes following error: ERROR: "ch_params" [drivers/media/platform/davinci/vpif_display.ko] undefined! ERROR: "vpif_ch_params_count" [drivers/media/platform/davinci/vpif_display.ko] undefined! ERROR: "vpif_base" [drivers/media/platform/davinci/vpif_display.ko] undefined! ERROR: "ch_params" [drivers/media/platform/davinci/vpif_capture.ko] undefined! ERROR: "vpif_ch_params_count" [drivers/media/platform/davinci/vpif_capture.ko] undefined! ERROR: "vpif_base" [drivers/media/platform/davinci/vpif_capture.ko] undefined! make[1]: *** [__modpost] Error 1 Reported-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NLad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Chen Gang 提交于
for NUL terminated string, need always set 0 in the end. Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Eduardo Valentin 提交于
Add MODULE_ALIAS entry for radio-si4713 platform driver. Signed-off-by: NEduardo Valentin <edubezval@gmail.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Eduardo Valentin 提交于
Simple addition of platform_driver->driver->owner for radio-si4713. Signed-off-by: NEduardo Valentin <edubezval@gmail.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Eduardo Valentin 提交于
As per code header comment, changing the driver license entry to match the correct version. Signed-off-by: NEduardo Valentin <edubezval@gmail.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Eduardo Valentin 提交于
Minor changes to make alignment match on open parenthesis. Signed-off-by: NEduardo Valentin <edubezval@gmail.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
I just made commit: "dvb_usb_v2: rework USB streaming logic" that breaks that driver PID filter. it913x driver checks use of PID filter directly from DVB USB v2 core internal variable "adap->pid_filtering" and stores it to own state. Calling order of .pid_filter_ctrl() and .pid_filter() was changed and due to that state was updated too late. Update state earlier. TODO: checking PID filter usage from DVB USB v2 is not very good idea as PID filter callbacks are called only when PID filter is enabled. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Control flow order changed a little bit. HW PID filter is now disabled also when streaming is stopped - earlier it was just set only when streaming was started. Control flow is now: * set streaming status bit * submit USB streaming packets * enable HW PID filter * ask device to start streaming * N x add PID to device HW PID filter ... streaming video ... * N x remove PID from device HW PID filter * ask device to stop streaming * disable HW PID filter * kill USB streaming packets * clear streaming status bit Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
New checkpatch version likes to see strings not to split multiple lines even those are exceeding 80 line length. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
New checkpatch version likes to see strings not to split multiple lines even those are exceeding 80 line length. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
There was sync mutex which was held over userspace. That is very wrong and could cause deadlock if different userspace process is used to "unlock". Wait queue seems to be correct solution for that kind of synchronizing issue so use it instead. lock debug gives following bug report: ================================================ [ BUG: lock held when returning to user space! ] 3.9.0-rc1+ #38 Tainted: G O ------------------------------------------------ tzap/4614 is leaving the kernel with locks still held! 1 lock held by tzap/4614: Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Instead of checking everywhere there for 3 symbols, use instead IS_ENABLED macro. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Instead of checking everywhere there for 3 symbols, use instead IS_ENABLED macro. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Instead of checking everywhere there for 3 symbols, use instead IS_ENABLED macro. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Instead of checking everywhere there for 3 symbols, use instead IS_ENABLED macro. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
As reported by Geert Uytterhoeven <geert@linux-m68k.org>: drivers/media/usb/hdpvr/hdpvr-video.c: warning: "CONFIG_I2C_MODULE" is not defined [-Wundef] Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Thanks-to: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Wei Yongjun 提交于
dvb_usb_v2_generic_io() was not declared. It should be static. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Commit aab3125c broke em28xx. I traced this eventually to the change in what algo_data points to. This pointer is also passed to em28xx_tuner_callback() through several hidden tuner layers (yuck!) and that callback was not updated. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
There's currently a bug on em28xx-i2c that makes it write the wrong values to register 06, that controlls the I2C bus speed and bus. Fix it to change only the I2C bus flag. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-