Cherry-pick from clear-linux patches:
https://github.com/clearlinux-pkgs/linux-kvm/0104-give-rdrand-some-credit.patch

try to credit rdrand/rdseed with some entropy

In VMs but even modern hardware, we're super starved for entropy, and while we can
and do wear a tin foil hat, it's very hard to argue that
rdrand and rdtsc add zero entropy.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>

Cherry-pick from kata-container patches:
https://github.com/kata-containers/packaging/tree/master/kernel/patches/0002-Compile-in-evged-always.patch

We need evged for NEMU (and in general for hw reduced)

The config option cannot be set normally since it breaks all
regular systems, and hardware reduced is really a runtime choice.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NEryu Guan <eguan@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

[ Upstream commit 5b5fd3c94eef69dcfaa8648198e54c92e5687d6d ]

Current code already uses d_strtoul_nonzero() to convert input string
to an unsigned integer, to make sure writeback_rate_p_term_inverse
won't be zero value. But overflow may happen when converting input
string to an unsigned integer value by d_strtoul_nonzero(), then
dc->writeback_rate_p_term_inverse can still be set to 0 even if the
sysfs file input value is not zero, e.g. 4294967296 (a.k.a UINT_MAX+1).

If dc->writeback_rate_p_term_inverse is set to 0, it might cause a
dev-zero error in following code from __update_writeback_rate(),
	int64_t proportional_scaled =
		div_s64(error, dc->writeback_rate_p_term_inverse);

This patch replaces d_strtoul_nonzero() by sysfs_strtoul_clamp() and
limit the value range in [1, UINT_MAX]. Then the unsigned integer
overflow and dev-zero error can be avoided.
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d693c008e3ca04db5916ff72e68ce661888a913b ]

Commit 53fa1f6e ("ACPI / video: Only default only_lcd to true on
Win8-ready _desktops_") introduced chassis type detection, limiting the
lcd_only check for the backlight to devices where the chassis-type
indicates their is no builtin LCD panel.

The purpose of the lcd_only check is to avoid advertising a backlight
interface on desktops, since skylake and newer machines seem to always
have a backlight interface even if there is no LCD panel. The limiting
of this check to desktops only was done to avoid breaking backlight
support on some laptops which do not have the lcd flag set.

The Fujitsu ESPRIMO Q910 which is a compact (NUC like) desktop machine
has a chassis type of 0x10 aka "Lunch Box". Without the lcd_only check
we end up falsely advertising backlight/brightness control on this
device. This commit extend the dmi_is_desktop check to return true
for type 0x10 to fix this.

Fixes: 53fa1f6e ("ACPI / video: Only default only_lcd to true ...")
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1f5d861f7fefa971b2c6e766f77932c86419a319 ]

When building with -Wsometimes-uninitialized, Clang warns:

drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable
'ns' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable
'ns' is used uninitialized whenever '&&' condition is false
[-Werror,-Wsometimes-uninitialized]

Clang is concerned with the use of stmmac_do_void_callback (which
stmmac_get_systime wraps), as it may fail to initialize these values if
the if condition was ever false (meaning the callback doesn't exist).
It's not wrong because the callback is what initializes ns. While it's
unlikely that the callback is going to disappear at some point and make
that condition false, we can easily avoid this warning by zero
initializing the variable.

Link: https://github.com/ClangBuiltLinux/linux/issues/384
Fixes: df103170854e ("net: stmmac: Avoid sometimes uninitialized Clang warnings")
Suggested-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c978ae9bde582e82a04c63a4071701691dd8b35c ]

We aren't supposed to force a stop+start between every i2c msg
when performing multi message transfers. This should eg. cause
the DDC segment address to be reset back to 0 between writing
the segment address and reading the actual EDID extension block.

To quote the E-DDC spec:
"... this standard requires that the segment pointer be
 reset to 00h when a NO ACK or a STOP condition is received."

Since we're going to touch this might as well consult the
I2C_M_STOP flag to determine whether we want to force the stop
or not.

Cc: Brian Vincent <brainn@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=108081Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.comReviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e9eb788f9442d1b5d93efdb30c3be071ce8a22b1 ]

The Microsoft documenation for the PNP0C40 device aka the
"Windows-compatible button array" describes the 5th GpioInt listed in
the resources as: '5. Interrupt corresponding to the "Rotation Lock"
button, if supported'.

Notice this describes the 5th entry as a button while we sofar have been
mapping it to EV_SW, SW_ROTATE_LOCK. On my Point of View TAB P1006W-232
which actually comes with a rotation-lock button, the button indeed is a
button and not a slider/switch. An image search for other Windows tablets
has found 2 more models with a rotation-lock button and on both of those
it too is a push-button and not a slider/switch.

Further evidence can be found in the HUT extension HUTRR52 from Microsoft
which adds rotation lock support to the HUT, which describes 2 different
usages: "0xC9 System Display Rotation Lock Button" and
"0xCA System Display Rotation Lock Slider Switch" note that switch is seen
as a separate thing here and the non switch wording is an exact match for
the "Windows-compatible button array" spec wording.

TL;DR: our current mapping of the 5th GPIO to SW_ROTATE_LOCK is wrong
because the 5th GPIO is for a push-button not a switch.

This commit fixes this by maping the 5th GPIO to KEY_ROTATE_LOCK_TOGGLE.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e486df39305864604b7e25f2a95d51039517ac57 ]

The dma_desc->bytes_transferred counter tracks the number of bytes
moved by the DMA channel. This is then used to calculate the information
passed back in the in the tegra_dma_tx_status callback, which is usually
fine.

When the DMA channel is configured as continous, then the bytes_transferred
counter will increase over time and eventually overflow to become negative
so the residue count will become invalid and the ALSA sound-dma code will
report invalid hardware pointer values to the application. This results in
some users becoming confused about the playout position and putting audio
data in the wrong place.

To fix this issue, always ensure the bytes_transferred field is modulo the
size of the request. We only do this for the case of the cyclic transfer
done ISR as anyone attempting to move 2GiB of DMA data in one transfer
is unlikely.

Note, we don't fix the issue that we should /never/ transfer a negative
number of bytes so we could make those fields unsigned.
Reviewed-by: NDmitry Osipenko <digetx@gmail.com>
Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>
Acked-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a0e447b0c50240a90ab84b7126b3c06b0bab4adc ]

This patch fixes settings of GPLL frequency in fractional mode for
rk3328. In this mode, FOUTVCO is calcurated by following formula:
  FOUTVCO = FREF * FBDIV / REFDIV + ((FREF * FRAC / REFDIV) >> 24)

The problem is in FREF * FRAC >> 24 term. This result always lacks
one from target value is specified by rate member. For example first
itme of rk3328_pll_frac_rate originally has
  - rate  : 1016064000
  - refdiv: 3
  - fbdiv : 127
  - frac  : 134217
  - FREF * FBDIV / REFDIV        = 1016000000
  - (FREF * FRAC / REFDIV) >> 24 = 63999
Thus calculated rate is 1016063999. It seems wrong.

If frac has 134218 (it is increased 1 from original value), second
term is 64000. All other items have same situation. So this patch
adds 1 to frac member in all items of rk3328_pll_frac_rate.
Signed-off-by: NKatsuhiro Suzuki <katsuhiro@katsuster.net>
Acked-by: NElaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8d9981efbcab066d17af4d3c85c169200f6f78df ]

Order, ids and size  between the table of regmap clocks and the onecell
data table could be different.

Set regmap pointer in all the regmap clocks before starting the
registration using the onecell data, to make sure we don't
get into an incoherent situation.
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181221160239.26265-3-jbrunet@baylibre.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 00eb5b0da8d27b3c944bfc959c3344d665caae26 ]

After drm_fb_helper_fbdev_setup calls drm_fb_helper_init,
"dev->fb_helper" will be initialized (and thus drm_fb_helper_fini will
have some effect). After that, drm_fb_helper_initial_config is called
which may call the "fb_probe" driver callback.

This driver callback may call drm_fb_helper_defio_init (as is done by
drm_fb_helper_generic_probe) or set a framebuffer (as is done by bochs)
as documented. These are normally cleaned up on exit by
drm_fb_helper_fbdev_teardown which also calls drm_fb_helper_fini.

If an error occurs after "fb_probe", but before setup is complete, then
calling just drm_fb_helper_fini will leak resources. This was triggered
by df2052cc922 ("bochs: convert to drm_fb_helper_fbdev_setup/teardown"):

    [   50.008030] bochsdrmfb: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer
    [   50.009436] bochs-drm 0000:00:02.0: [drm:drm_fb_helper_fbdev_setup] *ERROR* fbdev: Failed to set configuration (ret=-38)
    [   50.011456] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 2
    [   50.013604] WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x280/0x2a0
    [   50.016175] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G                T 4.20.0-rc7 #1
    [   50.017732] EIP: drm_mode_config_cleanup+0x280/0x2a0
    ...
    [   50.023155] Call Trace:
    [   50.023155]  ? bochs_kms_fini+0x1e/0x30
    [   50.023155]  ? bochs_unload+0x18/0x40

This can be reproduced with QEMU and CONFIG_FB_LITTLE_ENDIAN=n.

Link: https://lkml.kernel.org/r/20181221083226.GI23332@shao2-debian
Link: https://lkml.kernel.org/r/20181223004315.GA11455@al
Fixes: 87412163 ("drm/fb-helper: Add drm_fb_helper_fbdev_setup/teardown()")
Reported-by: Nkernel test robot <rong.a.chen@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: NPeter Wu <peter@lekensteyn.nl>
Reviewed-by: NNoralf Trønnes <noralf@tronnes.org>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181223005507.28328-1-peter@lekensteyn.nlSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ba2ffc96321c8433606ceeb85c9e722b8113e5a7 ]

Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware
failed instead of meaningless goto out to avoid the following memory leak
reports(Only the last one listed):

unreferenced object 0xc28a9a00 (size 512):
  comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
  backtrace:
    [<6624adab>] kmemleak_alloc+0x40/0x74
    [<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270
    [<db4d731d>] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore]
    [<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore]
    [<cbf30777>] drv_add_interface+0xa4/0x1a0 [mac80211]
    [<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211]
    [<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211]
    [<7e1d425a>] process_one_work+0x284/0x42c
    [<55f9432e>] worker_thread+0x2fc/0x48c
    [<abb582c6>] kthread+0x148/0x160
    [<63144b13>] ret_from_fork+0x14/0x2c
    [< (null)>] (null)
    [<1f6e7715>] 0xffffffff
Signed-off-by: NZumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4ad0be160544ffbdafb7cec39bb8e6dd0a97317a ]

The linux-firmware brcmfmac firmware files contain an embedded table with
per country allowed channels and strength info.

For recent hardware these versions of the firmware are specially build for
linux-firmware, the firmware files directly available from Cypress rely on
a separate clm_blob file for this info.

For some unknown reason Cypress refuses to provide the standard firmware
files + clm_blob files it uses elsewhere for inclusion into linux-firmware,
instead relying on these special builds with the clm_blob info embedded.
This means that the linux-firmware firmware versions often lag behind,
but I digress.

The brcmfmac driver does support the separate clm_blob file and always
tries to load this. Currently we use request_firmware for this. This means
that on any standard install, using the standard combo of linux-kernel +
linux-firmware, we will get a warning:
"Direct firmware load for ... failed with error -2"

On top of this, brcmfmac itself prints: "no clm_blob available (err=-2),
device may have limited channels available".

This commit switches to firmware_request_nowarn, fixing almost any brcmfmac
device logging the warning (it leaves the brcmfmac info message in place).
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 934c5b32a5e43d8de2ab4f1566f91d7c3bf8cb64 ]

The correct way for legacy drivers to update properties that need to
do a full modeset, is to do a full modeset.

Note that we don't need to call the drm_mode_config_internal helper
because we're not changing any of the refcounted paramters.

v2: Fixup error handling (Ville). Since the old code didn't bother
I decided to just delete it instead of adding even more code for just
error handling.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-2-daniel.vetter@ffwll.chSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 890880ddfdbe256083170866e49c87618b706ac7 ]

When drivers pass non-empty lists of modifiers for initializing their
planes, we can infer that they allow framebuffer modifiers and set the
driver's allow_fb_modifiers mode config element.

In case the allow_fb_modifiers element was not set (some drivers tend
to set them after registering planes), the modifiers will still be
registered but won't be available to userspace unless the flag is set
later. However in that case, the IN_FORMATS blob won't be created.

In order to avoid this case and generally reduce the trouble associated
with the flag, always set allow_fb_modifiers when a non-empty list of
format modifiers is passed at plane init.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190104085610.5829-1-paul.kocialkowski@bootlin.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6daae00243e622dd3feec7965bfe421ad6dd317e ]

Gigabit Ethernet requires the Ethernet TXD0..3 and RXD0..3 data lines.
Add the missing eth_rxd2 and eth_rxd3 definitions so we don't have to
rely on the bootloader to set them up correctly.

The vendor u-boot sources for Odroid-C1 use the following Ethernet
pinmux configuration:
  SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_6, 0x3f4f);
  SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_7, 0xf00000);
This translates to the following pin groups in the mainline kernel:
- register 6 bit  0: eth_rxd1 (DIF_0_P)
- register 6 bit  1: eth_rxd0 (DIF_0_N)
- register 6 bit  2: eth_rx_dv (DIF_1_P)
- register 6 bit  3: eth_rx_clk (DIF_1_N)
- register 6 bit  6: eth_tx_en (DIF_3_P)
- register 6 bit  8: eth_ref_clk (DIF_3_N)
- register 6 bit  9: eth_mdc (DIF_4_P)
- register 6 bit 10: eth_mdio_en (DIF_4_N)
- register 6 bit 11: eth_tx_clk (GPIOH_9)
- register 6 bit 12: eth_txd2 (GPIOH_8)
- register 6 bit 13: eth_txd3 (GPIOH_7)
- register 7 bit 20: eth_txd0_0 (GPIOH_6)
- register 7 bit 21: eth_txd1_0 (GPIOH_5)
- register 7 bit 22: eth_rxd3 (DIF_2_P)
- register 7 bit 23: eth_rxd2 (DIF_2_N)

All functions except eth_rxd2 and eth_rxd3 are already supported by the
pinctrl-meson8b driver.
Suggested-by: NJianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: NKevin Hilman <khilman@baylibre.com>
Tested-by: NEmiliano Ingrassia <ingrassia@epigenesys.com>
Reviewed-by: NEmiliano Ingrassia <ingrassia@epigenesys.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f01a7beb6791f1c419424c1a6958b7d0a289c974 ]

The act8600_sudcdc_voltage_ranges setting does not match the datasheet.

The problems in below entry:
  REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),

1. The off-by-one min_sel causes wrong volatage calculation.
   The min_sel should be 192.
2. According to the datasheet[1] Table 7. (on page 43):
   The selector 248 (0b11111000) ~ 255 (0b11111111) are 41.400V.

Also fix off-by-one for ACT8600_SUDCDC_VOLTAGE_NUM.

[1] https://active-semi.com/wp-content/uploads/ACT8600_Datasheet.pdf

Fixes: df3a950e ("regulator: act8865: Add act8600 support")
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 49710c32cd9d6626a77c9f5f978a5f58cb536b35 ]

Previously when doing format enumeration, it was returning all
 formats supported by driver, even if they're not supported by hw.
Add missing check for fmt_ver_flag, so it'll be fixed and only those
 supported by hw will be returned. Similar thing is already done
 in s5p_jpeg_find_format.

It was found by using v4l2-compliance tool and checking result
 of VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS test
and using v4l2-ctl to get list of all supported formats.

Tested on s5pv210-galaxys (Samsung i9000 phone).

Fixes: bb677f3a ("[media] Exynos4 JPEG codec v4l2 driver")
Signed-off-by: NPawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: NJacek Anaszewski <jacek.anaszewski@gmail.com>
[hverkuil-cisco@xs4all.nl: fix a few alignment issues]
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c5ff0edb8e2270a75935c73217fb0de1abd2d910 ]

There is a block of code in rvin_group_link_notify() that prevents
enabling a link to a VIN node if any entity in the media graph is
in use. This prevents enabling a VIN link even if there is an in-use
entity somewhere in the graph that is independent of the link's
pipeline.

For example, the code block will prevent enabling a link from
the first rcar-csi2 receiver to a VIN node even if there is an
enabled link somewhere far upstream on the second independent
rcar-csi2 receiver pipeline.

If this code block is meant to prevent modifying a link if any entity
in the graph is actively involved in streaming (because modifying
the CHSEL register fields can disrupt any/all running streams), then
the entities stream counts should be checked rather than the use counts.

(There is already such a check in __media_entity_setup_link() that verifies
the stream_count of the link's source and sink entities are both zero,
but that is insufficient, since there should be no running streams in
the entire graph).

Modify the code block to check the entity stream_count instead of the
use_count (and elaborate on the comment). VIN node links can now be
enabled even if there are other independent in-use entities that are
not streaming.

Fixes: c0cc5aef ("media: rcar-vin: add link notify for Gen3")
Signed-off-by: NSteve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 875aac8a46424e5b73a9ff7f40b83311b609e407 ]

In async_tx_test_ack(), it uses flags in struct dma_async_tx_descriptor
to check the ACK status. As hidma reuses the descriptor in a free list
when hidma_prep_dma_*(memcpy/memset) is called, the flag will keep ACKed
if the descriptor has been used before. This will cause a BUG_ON in
async_tx_quiesce().

  kernel BUG at crypto/async_tx/async_tx.c:282!
  Internal error: Oops - BUG: 0 1 SMP
  ...
  task: ffff8017dd3ec000 task.stack: ffff8017dd3e8000
  PC is at async_tx_quiesce+0x54/0x78 [async_tx]
  LR is at async_trigger_callback+0x98/0x110 [async_tx]

This patch initializes flags in dma_async_tx_descriptor by the flags
passed from the caller when hidma_prep_dma_*(memcpy/memset) is called.

Cc: Joey Zheng <yu.zheng@hxt-semitech.com>
Reviewed-by: NSinan Kaya <okaya@kernel.org>
Signed-off-by: NShunyong Yang <shunyong.yang@hxt-semitech.com>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 546c0547555efca8ba8c120716c325435e29df1b ]

When dma_cookie_complete() is called in hidma_process_completed(),
dma_cookie_status() will return DMA_COMPLETE in hidma_tx_status(). Then,
hidma_txn_is_success() will be called to use channel cookie
mchan->last_success to do additional DMA status check. Current code
assigns mchan->last_success after dma_cookie_complete(). This causes
a race condition of dma_cookie_status() returns DMA_COMPLETE before
mchan->last_success is assigned correctly. The race will cause
hidma_tx_status() return DMA_ERROR but the transaction is actually a
success. Moreover, in async_tx case, it will cause a timeout panic
in async_tx_quiesce().

 Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for
 transaction
 ...
 Call trace:
 [<ffff000008089994>] dump_backtrace+0x0/0x1f4
 [<ffff000008089bac>] show_stack+0x24/0x2c
 [<ffff00000891e198>] dump_stack+0x84/0xa8
 [<ffff0000080da544>] panic+0x12c/0x29c
 [<ffff0000045d0334>] async_tx_quiesce+0xa4/0xc8 [async_tx]
 [<ffff0000045d03c8>] async_trigger_callback+0x70/0x1c0 [async_tx]
 [<ffff0000048b7d74>] raid_run_ops+0x86c/0x1540 [raid456]
 [<ffff0000048bd084>] handle_stripe+0x5e8/0x1c7c [raid456]
 [<ffff0000048be9ec>] handle_active_stripes.isra.45+0x2d4/0x550 [raid456]
 [<ffff0000048beff4>] raid5d+0x38c/0x5d0 [raid456]
 [<ffff000008736538>] md_thread+0x108/0x168
 [<ffff0000080fb1cc>] kthread+0x10c/0x138
 [<ffff000008084d34>] ret_from_fork+0x10/0x18

Cc: Joey Zheng <yu.zheng@hxt-semitech.com>
Reviewed-by: NSinan Kaya <okaya@kernel.org>
Signed-off-by: NShunyong Yang <shunyong.yang@hxt-semitech.com>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9227ab5643cb8350449502dd9e3168a873ab0e3b ]

The warning got introduced by commit 930507c18304 ("arm64: add basic
Kconfig symbols for i.MX8"). Since it got enabled for arm64. The warning
haven't been seen before since size_t was 'unsigned int' when built on
arm32.

../drivers/dma/imx-dma.c: In function ‘imxdma_sg_next’:
../include/linux/kernel.h:846:29: warning: comparison of distinct pointer types lacks a cast
   (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
                             ^~
../include/linux/kernel.h:860:4: note: in expansion of macro ‘__typecheck’
   (__typecheck(x, y) && __no_side_effects(x, y))
    ^~~~~~~~~~~
../include/linux/kernel.h:870:24: note: in expansion of macro ‘__safe_cmp’
  __builtin_choose_expr(__safe_cmp(x, y), \
                        ^~~~~~~~~~
../include/linux/kernel.h:879:19: note: in expansion of macro ‘__careful_cmp’
 #define min(x, y) __careful_cmp(x, y, <)
                   ^~~~~~~~~~~~~
../drivers/dma/imx-dma.c:288:8: note: in expansion of macro ‘min’
  now = min(d->len, sg_dma_len(sg));
        ^~~

Rework so that we use min_t and pass in the size_t that returns the
minimum of two values, using the specified type.
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Reviewed-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 24d48a61f2666630da130cc2ec2e526eacf229e3 ]

Commit '3d035f58 ("drivers/char/hpet.c: allow user controlled mmap for
user processes")' introduced a new kernel command line parameter hpet_mmap,
that is required to expose the memory map of the HPET registers to
user-space. Unfortunately the kernel command line parameter 'hpet_mmap' is
broken and never takes effect due to missing '=' character in the __setup()
code of hpet_mmap_enable.

Before this patch:

dmesg output with the kernel command line parameter hpet_mmap=1

[    0.204152] HPET mmap disabled

dmesg output with the kernel command line parameter hpet_mmap=0

[    0.204192] HPET mmap disabled

After this patch:

dmesg output with the kernel command line parameter hpet_mmap=1

[    0.203945] HPET mmap enabled

dmesg output with the kernel command line parameter hpet_mmap=0

[    0.204652] HPET mmap disabled

Fixes: 3d035f58 ("drivers/char/hpet.c: allow user controlled mmap for user processes")
Signed-off-by: NBuland Singh <bsingh@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2edefc056e4f0e6ec9508dd1aca2c18fa320efef ]

Host driver should handle interrupt mask register earlier than wake up ish FW
else there will be conditions when FW interrupt comes, host PIMR register still
not set ready, so move the interrupt mask setting before ish_wakeup.

Clear PISR busy_clear bit in ish_irq_handler. If not clear, there will be
conditions host driver received a busy_clear interrupt (before the busy_clear
mask bit is ready), it will return IRQ_NONE after check_generated_interrupt,
the interrupt will never be cleared, causing the DEVICE not sending following
IRQ.

Since PISR clear should not be called for the CHV device we do this change.
After the change, both ISH2HOST interrupt and busy_clear interrupt will be
considered as interrupt from ISH, busy_clear interrupt will return IRQ_HANDLED
from IPC_IS_BUSY check.
Signed-off-by: NSong Hongyan <hongyan.song@intel.com>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 51294bf6b9e897d595466dcda5a3f2751906a200 ]

On cases where device tree entries for fuse and clock provider are in
different order, fuse driver needs to defer probing. This leads to
freeing incorrect IO base address as the fuse->base variable gets
overwritten once during first probe invocation. This leads to the
following spew during boot:

[    3.082285] Trying to vfree() nonexistent vm area (00000000cfe8fd94)
[    3.082308] WARNING: CPU: 5 PID: 126 at /hdd/l4t/kernel/stable/mm/vmalloc.c:1511 __vunmap+0xcc/0xd8
[    3.082318] Modules linked in:
[    3.082330] CPU: 5 PID: 126 Comm: kworker/5:1 Tainted: G S                4.19.7-tegra-gce119d3 #1
[    3.082340] Hardware name: quill (DT)
[    3.082353] Workqueue: events deferred_probe_work_func
[    3.082364] pstate: 40000005 (nZcv daif -PAN -UAO)
[    3.082372] pc : __vunmap+0xcc/0xd8
[    3.082379] lr : __vunmap+0xcc/0xd8
[    3.082385] sp : ffff00000a1d3b60
[    3.082391] x29: ffff00000a1d3b60 x28: 0000000000000000
[    3.082402] x27: 0000000000000000 x26: ffff000008e8b610
[    3.082413] x25: 0000000000000000 x24: 0000000000000009
[    3.082423] x23: ffff000009221a90 x22: ffff000009f6d000
[    3.082432] x21: 0000000000000000 x20: 0000000000000000
[    3.082442] x19: ffff000009f6d000 x18: ffffffffffffffff
[    3.082452] x17: 0000000000000000 x16: 0000000000000000
[    3.082462] x15: ffff0000091396c8 x14: 0720072007200720
[    3.082471] x13: 0720072007200720 x12: 0720072907340739
[    3.082481] x11: 0764076607380765 x10: 0766076307300730
[    3.082491] x9 : 0730073007300730 x8 : 0730073007280720
[    3.082501] x7 : 0761076507720761 x6 : 0000000000000102
[    3.082510] x5 : 0000000000000000 x4 : 0000000000000000
[    3.082519] x3 : ffffffffffffffff x2 : ffff000009150ff8
[    3.082528] x1 : 3d95b1429fff5200 x0 : 0000000000000000
[    3.082538] Call trace:
[    3.082545]  __vunmap+0xcc/0xd8
[    3.082552]  vunmap+0x24/0x30
[    3.082561]  __iounmap+0x2c/0x38
[    3.082569]  tegra_fuse_probe+0xc8/0x118
[    3.082577]  platform_drv_probe+0x50/0xa0
[    3.082585]  really_probe+0x1b0/0x288
[    3.082593]  driver_probe_device+0x58/0x100
[    3.082601]  __device_attach_driver+0x98/0xf0
[    3.082609]  bus_for_each_drv+0x64/0xc8
[    3.082616]  __device_attach+0xd8/0x130
[    3.082624]  device_initial_probe+0x10/0x18
[    3.082631]  bus_probe_device+0x90/0x98
[    3.082638]  deferred_probe_work_func+0x74/0xb0
[    3.082649]  process_one_work+0x1e0/0x318
[    3.082656]  worker_thread+0x228/0x450
[    3.082664]  kthread+0x128/0x130
[    3.082672]  ret_from_fork+0x10/0x18
[    3.082678] ---[ end trace 0810fe6ba772c1c7 ]---

Fix this by retaining the value of fuse->base until driver has
successfully probed.
Signed-off-by: NTimo Alho <talho@nvidia.com>
Acked-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit aef027db48da56b6f25d0e54c07c8401ada6ce21 ]

The virtio-rng driver uses a completion called have_data to wait for a
virtio read to be fulfilled by the hypervisor. The completion is reset
before placing a buffer on the virtio queue and completed by the virtio
callback once data has been written into the buffer.

Prior to this commit, the driver called init_completion on this
completion both during probe as well as when registering virtio buffers
as part of a hwrng read operation. The second of these init_completion
calls should instead be reinit_completion because the have_data
completion has already been inited by probe. As described in
Documentation/scheduler/completion.txt, "Calling init_completion() twice
on the same completion object is most likely a bug".

This bug was present in the initial implementation of virtio-rng in
f7f510ec ("virtio: An entropy device, as suggested by hpa"). Back
then the have_data completion was a single static completion rather than
a member of one of potentially multiple virtrng_info structs as
implemented later by 08e53fbd ("virtio-rng: support multiple
virtio-rng devices"). The original driver incorrectly used
init_completion rather than INIT_COMPLETION to reset have_data during
read.

Tested by running `head -c48 /dev/random | hexdump` within crosvm, the
Chrome OS virtual machine monitor, and confirming that the virtio-rng
driver successfully produces random bytes from the host.
Signed-off-by: NDavid Tolnay <dtolnay@gmail.com>
Tested-by: NDavid Tolnay <dtolnay@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 29856308137de1c21eda89411695f4fc6e9780ff ]

This driver sets initial frame width and height to 0x0, which is invalid.
So set it to selection rectangle bounds instead.

This is detected by v4l2-compliance detected.

Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e97a34563d18606ee5db93e495382a967f999cd4 ]

Power button suspend for some Dell models was added in:

commit 821b8536 ("platform/x86: intel-hid: Power button suspend on Dell Latitude 7275")

by checking against the power button press notification (0xCE) to report
the power button press event. The corresponding power button release
notification (0xCF) was caught and ignored to stop it from being reported
as an "unknown event" in the logs.

The missing button release event is creating issues on Android-x86, as
reported on the project mailing list for a Dell Latitude 5175 model, since
the events are expected in down/up pairs.

Report the power button release event to fix this issue.

Link: https://groups.google.com/forum/#!topic/android-x86/aSwZK9Nf9RoTested-by: NTristian Celestin <tristian.celestin@outlook.com>
Tested-by: NJérôme de Bretagne <jerome.debretagne@gmail.com>
Signed-off-by: NJérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: NMario Limonciello <mario.limonciello@dell.com>
[dvhart: corrected commit reference format per checkpatch]
Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 169e3b68cadb5775daca009ced4faf01ffd97dcf ]

On v3.10a in dual-role mode, if port is in device mode
and gadget driver isn't loaded, the OTG event interrupts don't
come through.

It seems that if the core is configured to be OTG2.0 only,
then we can't leave the DCFG.DEVSPD at Super-speed (default)
if we expect OTG to work properly. It must be set to High-speed.

Fix this issue by configuring DCFG.DEVSPD to the supported
maximum speed at gadget init. Device tree still needs to provide
correct supported maximum speed for this to work.

This issue wasn't present on v2.40a but is seen on v3.10a.
It doesn't cause any side effects on v2.40a.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 428da2bdb05d76c48d0bd8fbfa2e4c102685be08 ]

[Why]
In order to read CRC events when CRC capture is enabled the vblank
interrput handler needs to be running for the CRTC. The handler is
enabled while there is an active vblank reference.

When running IGT tests there will often be no active vblank reference
but the test expects to read a CRC value. This is valid usage (and
works on i915 since they have a CRC interrupt handler) so the reference
to the vblank should be grabbed while capture is active.

This issue was found running:

igt@kms_plane_multiple@atomic-pipe-b-tiling-none

The pipe-b is the only one in the initial commit and was not previously
active so no vblank reference is grabbed. The vblank interrupt is
not enabled and the test times out.

[How]
Keep a reference to the vblank as long as CRC capture is enabled.
If userspace never explicitly disables it then the reference is
also dropped when removing the CRTC from the context (stream = NULL).
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Reviewed-by: NSun peng Li <Sunpeng.Li@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7ab57b76ebf632bf2231ccabe26bea33868118c6 ]

We increase the default limit for buffer memory allocation by a factor of
10 to 640K to prevent data loss when using fast serial interfaces.

For example when using RS485 without flow-control at speeds of 1Mbit/s
an upwards we've run into problems such as applications being too slow
to read out this buffer (on embedded devices based on imx53 or imx6).

If you want to write transmitted data to a slow SD card and thus have
realtime requirements, this limit can become a problem.

That shouldn't be the case and 640K buffers fix such problems for us.

This value is a maximum limit for allocation only. It has no effect
on systems that currently run fine. When transmission is slow enough
applications and hardware can keep up and increasing this limit
doesn't change anything.

It only _allows_ to allocate more than 2*64K in cases we currently fail to
allocate memory despite having some.
Signed-off-by: NManfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: NMartin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cec2b18832e26bc866bef2be22eff4e25bbc4034 ]

gpiod_get_value() gives out a warning if access to the underlying gpiochip
requires sleeping, which is common for I2C based chips:

    WARNING: CPU: 0 PID: 77 at drivers/gpio/gpiolib.c:2500 gpiod_get_value+0xd0/0x100
    Modules linked in:
    CPU: 0 PID: 77 Comm: kworker/0:2 Not tainted 4.14.0-rc3-00589-gf32897915d48-dirty #90
    Hardware name: Allwinner sun4i/sun5i Families
    Workqueue: events deferred_probe_work_func
    [<c010ec50>] (unwind_backtrace) from [<c010b784>] (show_stack+0x10/0x14)
    [<c010b784>] (show_stack) from [<c0797224>] (dump_stack+0x88/0x9c)
    [<c0797224>] (dump_stack) from [<c0125b08>] (__warn+0xe8/0x100)
    [<c0125b08>] (__warn) from [<c0125bd0>] (warn_slowpath_null+0x20/0x28)
    [<c0125bd0>] (warn_slowpath_null) from [<c037069c>] (gpiod_get_value+0xd0/0x100)
    [<c037069c>] (gpiod_get_value) from [<c03778d0>] (pwm_backlight_probe+0x238/0x508)
    [<c03778d0>] (pwm_backlight_probe) from [<c0411a2c>] (platform_drv_probe+0x50/0xac)
    [<c0411a2c>] (platform_drv_probe) from [<c0410224>] (driver_probe_device+0x238/0x2e8)
    [<c0410224>] (driver_probe_device) from [<c040e820>] (bus_for_each_drv+0x44/0x94)
    [<c040e820>] (bus_for_each_drv) from [<c040ff0c>] (__device_attach+0xb0/0x114)
    [<c040ff0c>] (__device_attach) from [<c040f4f8>] (bus_probe_device+0x84/0x8c)
    [<c040f4f8>] (bus_probe_device) from [<c040f944>] (deferred_probe_work_func+0x50/0x14c)
    [<c040f944>] (deferred_probe_work_func) from [<c013be84>] (process_one_work+0x1ec/0x414)
    [<c013be84>] (process_one_work) from [<c013ce5c>] (worker_thread+0x2b0/0x5a0)
    [<c013ce5c>] (worker_thread) from [<c0141908>] (kthread+0x14c/0x154)
    [<c0141908>] (kthread) from [<c0107ab0>] (ret_from_fork+0x14/0x24)

This was missed in commit 0c9501f8 ("backlight: pwm_bl: Handle gpio
that can sleep"). The code was then moved to a separate function in
commit 7613c922 ("backlight: pwm_bl: Move the checks for initial power
state to a separate function").

The only usage of gpiod_get_value() is during the probe stage, which is
safe to sleep in. Switch to gpiod_get_value_cansleep().

Fixes: 0c9501f8 ("backlight: pwm_bl: Handle gpio that can sleep")
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Acked-by: NDaniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3bd1505fed71d834f45e87b32ff07157fdda47e0 ]

As reported by Michael eeprom 0d is supported and work with the driver.

Dump of /sys/kernel/debug/ieee80211/phy1/mt7601u/eeprom_param
with 0d EEPORM looks like this:

RSSI offset: 0 0
Reference temp: f9
LNA gain: 8
Reg channels: 1-14
Per rate power:
	 raw:05 bw20:05 bw40:05
	 raw:05 bw20:05 bw40:05
	 raw:03 bw20:03 bw40:03
	 raw:03 bw20:03 bw40:03
	 raw:04 bw20:04 bw40:04
	 raw:00 bw20:00 bw40:00
	 raw:00 bw20:00 bw40:00
	 raw:00 bw20:00 bw40:00
	 raw:02 bw20:02 bw40:02
	 raw:00 bw20:00 bw40:00
Per channel power:
	 tx_power  ch1:09 ch2:09
	 tx_power  ch3:0a ch4:0a
	 tx_power  ch5:0a ch6:0a
	 tx_power  ch7:0b ch8:0b
	 tx_power  ch9:0b ch10:0b
	 tx_power  ch11:0b ch12:0b
	 tx_power  ch13:0b ch14:0b
Reported-and-tested-by: NMichael <ZeroBeat@gmx.de>
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Acked-by: NJakub Kicinski <kubakici@wp.pl>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8cd09a3dd3e176c62da67efcd477a44a8d87185e ]

If of_platform_populate() fails in gsbi_probe(),
gsbi->hclk is left undisabled.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NAndy Gross <andy.gross@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4e46c2a956215482418d7b315749fb1b6c6bc224 ]

The UEFI spec revision 2.7 errata A section 8.4 has the following to
say about the virtual memory runtime services:

  "This section contains function definitions for the virtual memory
  support that may be optionally used by an operating system at runtime.
  If an operating system chooses to make EFI runtime service calls in a
  virtual addressing mode instead of the flat physical mode, then the
  operating system must use the services in this section to switch the
  EFI runtime services from flat physical addressing to virtual
  addressing."

So it is pretty clear that calling SetVirtualAddressMap() is entirely
optional, and so there is no point in doing so unless it achieves
anything useful for us.

This is not the case for 64-bit ARM. The identity mapping used by the
firmware is arbitrarily converted into another permutation of userland
addresses (i.e., bits [63:48] cleared), and the runtime code could easily
deal with the original layout in exactly the same way as it deals with
the converted layout. However, due to constraints related to page size
differences if the OS is not running with 4k pages, and related to
systems that may expose the individual sections of PE/COFF runtime
modules as different memory regions, creating the virtual layout is a
bit fiddly, and requires us to sort the memory map and reason about
adjacent regions with identical memory types etc etc.

So the obvious fix is to stop calling SetVirtualAddressMap() altogether
on arm64 systems. However, to avoid surprises, which are notoriously
hard to diagnose when it comes to OS<->firmware interactions, let's
start by making it an opt-out feature, and implement support for the
'efi=novamap' kernel command line parameter on ARM and arm64 systems.

( Note that 32-bit ARM generally does require SetVirtualAddressMap() to be
  used, given that the physical memory map and the kernel virtual address
  map are not guaranteed to be non-overlapping like on arm64. However,
  having support for efi=novamap,noruntime on 32-bit ARM, combined with
  the recently proposed support for earlycon=efifb, is likely to be useful
  to diagnose boot issues on such systems if they have no accessible serial
  port. )
Tested-by: NJeffrey Hugo <jhugo@codeaurora.org>
Tested-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190202094119.13230-8-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit def35e7c592616bc09be328de8795e5e624a3cf8 ]

kms_flip tests are breaking on vkms when simulate vblank because vblank
event sequence count returns one extra frame after arm vblank event to
make a page flip.

When vblank interrupt happens, userspace processes the vblank event and
issues the next page flip command. Kernel calls queue_work to call
commit_planes and arm the new page flip. The next vblank picks up the
newly armed vblank event and vblank interrupt happens again.

The arm and vblank event are asynchronous, then, on the next vblank, we
receive x+2 from `get_vblank_timestamp`, instead x+1, although timestamp
and vblank seqno matches.

Function `get_vblank_timestamp` is reached by 2 ways:

  - from `drm_mode_page_flip_ioctl`: driver is doing one atomic
    operation to synchronize planes in the same output. There is no
    vblank simulation, the `drm_crtc_arm_vblank_event` function adds 1
    on vblank count, and the variable in_vblank_irq is false
  - from `vkms_vblank_simulate`: since the driver is doing a vblank
    simulation, the variable in_vblank_irq is true.

Fix this problem subtracting one vblank period from vblank_time when
`get_vblank_timestamp` is called from trace `drm_mode_page_flip_ioctl`,
i.e., is not a real vblank interrupt, and getting the timestamp and
vblank seqno when it is a real vblank interrupt.

The reason for all this is that get_vblank_timestamp always supplies the
timestamp for the next vblank event. The hrtimer is the vblank
simulator, and it needs the correct previous value to present the next
vblank. Since this is how hw timestamp registers work and what the
vblank core expects.
Signed-off-by: NShayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NRodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: NRodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/171e6e1c239cbca0c3df7183ed8acdfeeace9cf4.1548856186.git.shayenneluzmoura@gmail.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5de0fef0230f3c8d75cff450a71740a7bf2db866 ]

The EFI memory attributes code cross-references the EFI memory map with
the more granular EFI memory attributes table to ensure that they are in
sync before applying the strict permissions to the regions it describes.

Since we always install virtual mappings for the EFI runtime regions to
which these strict permissions apply, we currently perform a sanity check
on the EFI memory descriptor, and ensure that the EFI_MEMORY_RUNTIME bit
is set, and that the virtual address has been assigned.

However, in cases where a runtime region exists at physical address 0x0,
and the virtual mapping equals the physical mapping, e.g., when running
in mixed mode on x86, we encounter a memory descriptor with the runtime
attribute and virtual address 0x0, and incorrectly draw the conclusion
that a runtime region exists for which no virtual mapping was installed,
and give up altogether. The consequence of this is that firmware mappings
retain their read-write-execute permissions, making the system more
vulnerable to attacks.

So let's only bail if the virtual address of 0x0 has been assigned to a
physical region that does not reside at address 0x0.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NSai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 10f0d2f5 ("efi: Implement generic support for the Memory ...")
Link: http://lkml.kernel.org/r/20190202094119.13230-4-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit dbf592f3d14fb7d532cb7c820b1065cf33e02aaa ]

If we have >=10 (logical) CPUs, our command size exceeds the
internal buffer size and the command fails; fix that by using
IWL_HCMD_DFL_NOCOPY for the command that's allocated anyway.

While at it, also fix the leak of cmd, and use struct_size()
to calculate its size.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Fixes: 8edbfaa1 ("iwlwifi: mvm: configure multi RX queue")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 46c337872f34bc6387b0c29a4964f562c70139e3 ]

This patch adds a return code check on device_reset() and removes the
compile warning.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NNeilBrown <neil@brown.name>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e814e688413aabd7b0d75e2a8ed1caa472951dec ]

If an I2C adapter doesn't match the provided device tree node, also try
matching the parent's device tree node. This allows finding an adapter
based on the device node of the parent device that was used to register
it.

This fixes a regression on Tegra124-based Chromebooks (Nyan) where the
eDP controller registers an I2C adapter that is used to read to EDID.
After commit 993a815dcbb2 ("dt-bindings: panel: Add missing .txt
suffix") this stopped working because the I2C adapter could no longer
be found. The approach in this patch fixes the regression without
introducing the issues that the above commit solved.

Fixes: 17ab7806 ("drm: don't link DP aux i2c adapter to the hardware device node")
Signed-off-by: NThierry Reding <treding@nvidia.com>
Tested-by: NTristan Bastian <tristan-c.bastian@gmx.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>