- 18 5月, 2010 12 次提交
-
-
由 Grazvydas Ignotas 提交于
This panel depends on SPI, not I2C. Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Vaibhav Hiremath 提交于
Tested on OMAP3EVM for OMAP3530 and AM/DM 3730. Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> [tomi.valkeinen@nokia.com: added slab.h include] [tomi.valkeinen@nokia.com: added dependency to BACKLIGHT_CLASS_DEVICE] Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Ville Syrjälä 提交于
If omapdss_dsi_display_enable() failed the DSI bus was left locked. Also if the operation failed later omapdss_dsi_display_disable() would get called without holding the bus lock. Signed-off-by: NVille Syrjälä <ville.syrjala@nokia.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
There are some strange problems with DSI and updates with odd widths. One particular problem is that HS TX timeout triggers easily with updates with odd widths. This patch makes the updates widths even, circumventing the problem. There should be no ill side effects with increasing the update area slightly to make the width even. Signed-off-by: NVille Syrjälä <ville.syrjala@nokia.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Jani Nikula 提交于
Only call driver disable when device isn't already disabled, which also handles the driver not loaded case. Signed-off-by: NJani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Jani Nikula 提交于
platform_enable/disable() is already called in venc_power_on/off(), so don't do it again in venc_panel_enable/disable(). Signed-off-by: NJani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Jani Nikula 提交于
Give up if lock_fb_info() fails, following the same convention as other lock_fb_info() users. Signed-off-by: NJani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Jani Nikula 提交于
Framebuffer ioctl processing forces lock_fb_info() -> omapfb_lock() locking order. Follow that order to avoid possible circular locking dependency, detected by lockdep. Signed-off-by: NJani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Roger Quadros 提交于
This patch enables the use of vdds_sdi regulator in SDI subsystem. We can disable the vdds_sdi voltage when not in use to save power. Signed-off-by: NRoger Quadros <roger.quadros@nokia.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Roger Quadros 提交于
Panel enable/disable is now done via the panel driver, so we should not call the panel driver again Signed-off-by: NRoger Quadros <roger.quadros@nokia.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Roger Quadros 提交于
This allows us to disable DPI on systems that do not have it Signed-off-by: NRoger Quadros <roger.quadros@nokia.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 17 3月, 2010 1 次提交
-
-
由 Matthew Garrett 提交于
Values such as max_brightness should be set before backlights are registered, but the current API doesn't allow that. Add a parameter to backlight_device_register and update drivers to ensure that they set this correctly. Signed-off-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
- 15 3月, 2010 2 次提交
-
-
由 Tomi Valkeinen 提交于
Mode changing code was left out with the DSS driver remodeling. Add the code back. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Clk sources were not initialized, leading to kernel crash, or possibly to strange behaviour if DSI was compiled in. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
- 10 3月, 2010 1 次提交
-
-
由 Thomas Weber 提交于
In commit 2b0d8c25 the __early_param is replaced with the generic early_param. This patch fixes the parameter passing for the vram. Signed-off-by: NThomas Weber <weber@corscience.de> [tomi.valkeinen@nokia.com: changed the commit prefix] Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
- 08 3月, 2010 1 次提交
-
-
由 Emese Revfy 提交于
Constify struct sysfs_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by: NEmese Revfy <re.emese@gmail.com> Acked-by: NDavid Teigland <teigland@redhat.com> Acked-by: NMatt Domsch <Matt_Domsch@dell.com> Acked-by: NMaciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: NHans J. Koch <hjk@linutronix.de> Acked-by: NPekka Enberg <penberg@cs.helsinki.fi> Acked-by: NJens Axboe <jens.axboe@oracle.com> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 02 3月, 2010 1 次提交
-
-
由 Tomi Valkeinen 提交于
TE was not initialized properly on power on, which broke TE when resuming from suspend. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
- 01 3月, 2010 2 次提交
-
-
由 Tomi Valkeinen 提交于
Using taal_enable_te() when DSI bus was locked caused a deadlock. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Ville Syrjälä 提交于
Signed-off-by: NVille Syrjälä <ville.syrjala@nokia.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
- 26 2月, 2010 3 次提交
-
-
由 Tomi Valkeinen 提交于
Add error printing for dsi_vc_dcs_write() and dsi_vc_dcs_read(). Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Copy/paste had resulted in wrong function names in TPO TD043MTEA1 panel driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Add dsi_vc_dcs_read_2() helper function to read two bytes from the DSI peripheral. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
- 24 2月, 2010 16 次提交
-
-
由 Tomi Valkeinen 提交于
Remove the option for forcing auto-update. Auto-update for manual update displays is no more a DSS feature, so if a particular display devices does have auto-update mode, it should be in display's custom settings. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
With the reworked model, DSI driver doesn't need to know anything about external TE lines. Thus we can remove ext_te support, and only leave the DSI TE trigger support. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Move check/set/get_timings() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Move set/get_wss() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Move enable/disable/suspend/resume from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Move update() and sync() from omap_dss_device to omap_dss_driver. Also, update was hardcoded to use virtual channel 0. This patch adds a parameter that specifies the VC. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Move set/get_update_mode() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Move enable/get_te() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Move get_recommended_bpp() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Move get_resolution() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Move enable/disable_channel() from omap_dss_device to overlay manager. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Move wait_vsync() from omap_dss_device to overlay manager. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Move get/set_rotate() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Move set/get_mirror() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Move memory_read() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Move run_test() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-