- 04 4月, 2012 1 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit d06221c0. It turns out to trigger the "BUG_ON(!PageCompound(page))" in kfree(), apparently because the code ends up trying to free somethng that was never kmalloced in the first place. BenH points out that the patch was untested and wasn't meant to go into the upstream kernel that quickly in the first place. Backtrace: bios_shadow bios_shadow_prom nv_mask init_io bios_shadow nouveau_bios_init NVReadVgaCrtc NVSetOwner nouveau_card_init nouveau_load Reported-by: NMeelis Roos <mroos@linux.ee> Requested-by: NDave Airlie <airlied@gmail.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 4月, 2012 2 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The code tries various methods for retreiving the BIOS data. However it doesn't clear the bios->data pointer between the iterations. In some cases, the shadow() method will fail and not update bios->data at all, which will cause us to "score" the old data and incorrectly attribute that score to the new method. This can cause double frees later when disposing of the unused data. Additionally, we were not freeing the data for methods that fail the score test (we only freed when a "best" is superseeded, not when the new method has a lower score than the exising "best"). Fix that as well. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NBen Skeggs <bskeggs@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Benjamin Herrenschmidt 提交于
From b15b244d6e6e20964bd4b85306722cb60c3c0809 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Mon, 2 Apr 2012 13:28:18 +1000 Subject: Under some circumstances, pci_map_rom() can return a valid mapping but a size of 0 (if it cannot find an image in the header). This causes nouveau to try to kmalloc() a 0 sized pointer and dereference it, which crashes. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NBen Skeggs <bskeggs@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 22 3月, 2012 1 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 13 3月, 2012 2 次提交
-
-
由 Ben Skeggs 提交于
Refactored to allow shadowing of VBIOS images longer than 64KiB, which allows us to pass the VBIOS checksum test on certain boards. There's also a workaround for reading the PROM VBIOS on some chipsets. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
There's cards out there with completely messed up PCIROM images that have a perfectly valid signature.. Sigh! Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 21 12月, 2011 10 次提交
-
-
由 Ben Skeggs 提交于
- moves out of nouveau_bios.c and demagics the logical state definitions - simplifies chipset-specific driver interface - makes most of gpio irq handling common, will use for nv4x hpd later - api extended to allow both direct gpio access, and access using the logical function states - api extended to allow for future use of gpio extender chips - pre-nv50 was handled very badly, the main issue being that all GPIOs were being treated as output-only. - fixes nvd0 so gpio changes actually stick, magic reg needs bashing Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
The DCB table provided by the VBIOS on most MXM chips has a number of entries which either need to be disabled, or modified according to the MXM-SIS Output Device Descriptors. The x86 vbios code usually takes care of this for us, however, with the large number of laptops now with switchable graphics or optimus, a lot of the time nouveau is responsible for POSTing the card instead - leaving some fun situations like, plugging in a monitor and having nouveau decide 3 connectors actually just got plugged in.. No MXM-SIS fetching methods implemented yet. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Another case where we parsed vbios data to some structs, then again use that info once to construct another set of data. Skip the intermediate step. This is also slightly improved in that we can now use DCB 3.x connector table info, which will allow NV4x to gain hotplug support, and to make quirks for SPWG LVDS panels unnecessary. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Not much point parsing the vbios data into a struct which is only used once to parse the data into another struct, go directly from vbios to nouveau_i2c_chan. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
This primary reason for this was mostly to avoid duplication of some of this stuff by the MXM-SIS parser. However, some other cleanups will also follow this as a result. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Martin Peres 提交于
Following to "drm/nv50/pm: s/unk05/vdec/", let's rename the PLL to PLL_VDEC PLL names are purely indicative and are based on the most important engine it clocks. Signed-off-by: NMartin Peres <martin.peres@labri.fr> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 10 11月, 2011 1 次提交
-
-
由 Ben Skeggs 提交于
Reportedly this has been causing stability and corruption issues after resuming from suspend for a few people. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 20 9月, 2011 9 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Will need to be able to distinguish 2.0/2.1 from 3.0 soon. Also, move the vbios parsing to nouveau_dp where it belongs. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
The caller is now responsible for parsing its own lists (or whatever) of possible encoders. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Allows us to be lazy elsewhere... Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 25 7月, 2011 1 次提交
-
-
由 Emil Velikov 提交于
The connector table lies, the card has DVI-I not HDMI Fixes bug https://bugs.freedesktop.org/show_bug.cgi?id=35675 v2: Mention the bugreport Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 27 6月, 2011 1 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 23 6月, 2011 2 次提交
-
-
由 Ben Skeggs 提交于
There's lots of boards (all recent ones) that don't have this anymore, so punt the message to debug loglevel. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 16 5月, 2011 2 次提交
-
-
由 Ben Skeggs 提交于
After looking at a number of different logs, it appears 0x41 likely indicates the presense of an LVDS panel following the SPWG spec (http://www.spwg.org/) Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 05 4月, 2011 2 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 25 2月, 2011 2 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
The nv50 display isr bh needs to be converted to a tasklet, which means we can't sleep anymore. The places we execute vbios init tables are rare, and not in any way performance critical, so this isn't a huge problem. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 17 2月, 2011 1 次提交
-
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 25 1月, 2011 1 次提交
-
-
由 Francisco Jerez 提交于
Fixes the DVI-D output on that board (fdo bug 32645). Reported-by: NBryan Quigley <BryanQuigley@Ubuntu.com> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 03 1月, 2011 1 次提交
-
-
由 Stefan Weil 提交于
milisecond -> millisecond meassge -> message Cc: Kalle Valo <kvalo@adurom.com> Cc: Jiri Kosina <trivial@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 03 12月, 2010 1 次提交
-
-
由 Francisco Jerez 提交于
In typical Apple fashion there's no standard information about what encoders are present on this machine, this patch adds a quirk to provide it. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-