Add iio driver for Maxim max9611 and max9612 current-sense amplifiers
with 12-bits ADC interface.

Datasheet publicly available at:
https://datasheets.maximintegrated.com/en/ds/MAX9611-MAX9612.pdfSigned-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

When a hid sensor module is removed and modprobed again we see
error for unbalanced pm_runtime. This issue is caused by not
deactivating runtime PM on removal. So on modprobe again when
activated again, this will print this error.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

stm32 adc supports several resolution. Add 'assigned-resolution-bits'
dt optional property to set it. Default to maximum resolution in case
it isn't set.
Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

i2c_mux_add_adapter already logs a message on failure.
Signed-off-by: NPeter Rosin <peda@axentia.se>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch allows to avoid a transitory that occurs when a given sensor
has been already enabled (e.g. gyroscope) and the user is configuring
the sample frequency of the other one (e.g. accelerometer).
The transitory lasts until the accelerometer is enabled.
During that time slice the gyroscope ODR is incorrectly modified as well.
At the end of the transitory both sensors work at the right frequency.
Fix it introducing st_lsm6dsx_check_odr() routine to check ODR consistency
in write_raw handler in order to apply frequency configuration just
in st_lsm6dsx_set_odr()

Fixes: 290a6ce1 (iio: imu: add support to lsm6dsx driver)
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

With CONFIG_THERMAL=m and CONFIG_SUN4I_GPADC=y, we get a link error
from calling devm_thermal_zone_of_sensor_register:

drivers/iio/built-in.o: In function `sun4i_gpadc_probe':
:(.text+0x1c284): undefined reference to `devm_thermal_zone_of_sensor_register'

This adds a Kconfig dependency to ensure we can only have the ADC
driver as built-in when this function is also built-in, or when
we see the empty stub implementation. When the thermal code is
a module, we can still build the adc driver as a module, too.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: d1caa990 ("iio: adc: add support for Allwinner SoCs ADC")
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch adds support for the Analog Devices / Linear Technology
LTC2497 ADCs. The LTC2497 is a 16-channel (eight differential),
16-bit, high precision, delta-sigma ADC with an automatic, differential,
input current cancellation front end and a 2-wire, I2C interface.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The mpu9250 is a SIP containing an mpu6500 and an ak8975.  If this was all
there was too it there would be no need for explicit handling in the driver.
Arguably the bindings would also only reflect the presence of an mpu6500 with
the ak8975 hanging off it, as the kernel doesn't care that they are in one
package.

However, the WHOAMI value changes as well so best to add explicit support.
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The following Coccinelle script was used to detect this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T*)x)->f
|
- (T*)
  e
)
Signed-off-by: Nsimran singhal <singhalsimran0@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The following Coccinelle script was used to detect this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T*)x)->f
|
- (T*)
  e
)
Signed-off-by: Nsimran singhal <singhalsimran0@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The following Coccinelle script was used to detect this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T*)x)->f
|
- (T*)
  e
)
Signed-off-by: Nsimran singhal <singhalsimran0@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The following Coccinelle script was used to detect this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T*)x)->f
|
- (T*)
  e
)
Signed-off-by: Nsimran singhal <singhalsimran0@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The following Coccinelle script was used to detect this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T*)x)->f
|
- (T*)
  e
)
Signed-off-by: Nsimran singhal <singhalsimran0@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The following Coccinelle script was used to detect this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T*)x)->f
|
- (T*)
  e
)
Signed-off-by: Nsimran singhal <singhalsimran0@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Check for attribute_group structures that are only stored in the
event_attrs filed of iio_info structure. As the event_attrs field of
iio_info structures is constant, so these attribute_group structures can
also be declared constant. Done using coccinelle:

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct attribute_group i@p = {...};

@ok1@
identifier r1.i;
position p;
struct iio_info x;
@@
x.event_attrs=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct attribute_group i={...};

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct attribute_group i;

As the attrs field of iio_info structures is also constant, so these
attribute_group structures can also be declared constant. Done manually.

File size before:
   text    data     bss     dec     hex filename
   5798    2376       0    8174    1fee drivers/iio/light/lm3533-als.o

File size after:
   text	   data	    bss	    dec	    hex	filename
   5926	   2248	      0	   8174	   1fee	drivers/iio/light/lm3533-als.o
Signed-off-by: Nsimran singhal <singhalsimran0@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Aspeed BMC SoCs include a 16 channel, 10-bit ADC. Low and high threshold
interrupts are supported by the hardware but are not currently implemented.
Signed-off-by: NRick Altherr <raltherr@google.com>
Tested-by: NXo Wang <xow@google.com>
Reviewed-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Check for attribute_group structures that are only stored in the
attrs filed of iio_info structure. As the attrs field of iio_info
structures is constant, so these attribute_group structures can also be
declared constant.
Done using coccinelle:

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct attribute_group i@p = {...};

@ok1@
identifier r1.i;
position p;
struct iio_info x;
@@
x.attrs=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct attribute_group i={...};

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct attribute_group i;

File size before:
   text	   data	    bss	    dec	    hex	filename
   3042	    480	      0	   3522	    dc2	drivers/iio/adc/hx711.o

File size after:
   text	   data	    bss	    dec	    hex	filename
   3098	    416	      0	   3514	    dba	drivers/iio/adc/hx711.o
Signed-off-by: Nsimran singhal <singhalsimran0@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Check for attribute_group structures that are only stored in the
attrs filed of iio_info structure. As the attrs field of iio_info
structures is constant, so these attribute_group structures can also be
declared constant.
Done using coccinelle:

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct attribute_group i@p = {...};

@ok1@
identifier r1.i;
position p;
struct iio_info x;
@@
x.attrs=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct attribute_group i={...};

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct attribute_group i;

File size before:
   text	   data	    bss	    dec	    hex	filename
   3459	    488	      0	   3947	    f6b	drivers/iio/humidity/hdc100x.o

File size after:
   text	   data	    bss	    dec	    hex	filename
   3507	    424	      0	   3931	    f5b	drivers/iio/humidity/hdc100x.o
Signed-off-by: Nsimran singhal <singhalsimran0@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Check for attribute_group structures that are only stored in the
attrs filed of iio_info structure. As the attrs field of iio_info
structures is constant, so these attribute_group structures can also be
declared constant.
Done using coccinelle:

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct attribute_group i@p = {...};

@ok1@
identifier r1.i;
position p;
struct iio_info x;
@@
x.attrs=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct attribute_group i={...};

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct attribute_group i;

File size before:
   text	   data	    bss	    dec	    hex	filename
   8503	    488	      0	   8991	   231f	drivers/iio/light/apds9960.o

File size after:
   text	   data	    bss	    dec	    hex	filename
   8567	    424	      0	   8991	   231f	drivers/iio/light/apds9960.o
Signed-off-by: Nsimran singhal <singhalsimran0@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Check for attribute_group structures that are only stored in the
attrs filed of iio_info structure. As the attrs field of iio_info
structures is constant, so these attribute_group structures can also be
declared constant.
Done using coccinelle:

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct attribute_group i@p = {...};

@ok1@
identifier r1.i;
position p;
struct iio_info x;
@@
x.attrs=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct attribute_group i={...};

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct attribute_group i;

File size before:
   text	   data	    bss	    dec	    hex	filename
   2276	    352	      0	   2628	    a44	drivers/iio/light/bh1750.o

File size after:
   text	   data	    bss	    dec	    hex	filename
   2340	    320	      0	   2660	    a64	drivers/iio/light/bh1750.o
Signed-off-by: Nsimran singhal <singhalsimran0@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Check for attribute_group structures that are only stored in the
attrs filed of iio_info structure. As the attrs field of iio_info
structures is constant, so these attribute_group structures can also be
declared constant.
Done using coccinelle:

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct attribute_group i@p = {...};

@ok1@
identifier r1.i;
position p;
struct iio_info x;
@@
x.attrs=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct attribute_group i={...};

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct attribute_group i;

File size before:
   text	   data	    bss	    dec	    hex	filename
   4037	    288	      0	   4325	   10e5	drivers/iio/proximity/as3935.o

File size after:
   text	   data	    bss	    dec	    hex	filename
   4101	    256	      0	   4357	   1105	drivers/iio/proximity/as3935.o
Signed-off-by: Nsimran singhal <singhalsimran0@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

On Motorola phones like droid 4 there is a custom CPCAP PMIC. This PMIC
has ADCs that are used for battery charging and USB PHY VBUS and ID pin
detection.

Unfortunately the only documentation for this ADC seems to be the
Motorola mapphone Linux kernel tree. I have tested that reading raw and
scaled values works, but I have not used the timed sampling that the ADC
seems to support.

Let's add a minimal support for it so we can eventually provide IIO
channels for the related battery charging and USB PHY drivers.

Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Replace a comma between expression statements by a semicolon. This
changes the semantics of the code, but given the current indentation
appears to be what is intended.
A simplified version of the Coccinelle semantic patch that performs this
transformation is as follows:

// <smpl>
@r@
expression e1,e2;
@@

 e1
-,
+;
 e2;
// </smpl>
Signed-off-by: NArushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Replace a comma between expression statements by a semicolon. This
changes the semantics of the code, but given the current indentation
appears to be what is intended.
A simplified version of the Coccinelle semantic patch that performs this
transformation is as follows:

// <smpl>
@r@
expression e1,e2;
@@

 e1
-,
+;
 e2;
// </smpl>
Signed-off-by: NArushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Check for attribute_group structures that are only stored in the
event_attrs filed of iio_info structure. As the event_attrs field of
iio_info structures is constant, so these attribute_group structures can
also be declared constant.
Done using coccinelle:

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct attribute_group i@p = {...};

@ok1@
identifier r1.i;
position p;
struct iio_info x;
@@
x.event_attrs=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct attribute_group i={...};

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct attribute_group i;

File size before:
   text    data     bss     dec     hex filename
  26051     464       0   26515    6793 drivers/iio/adc/ad799x.o

File size after:
   text	   data	    bss	    dec	    hex	filename
  26115	    400	      0	  26515	   6793	drivers/iio/adc/ad799x.o
Signed-off-by: Nsimran singhal <singhalsimran0@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Check for attribute_group structures that are only stored in the
event_attrs filed of iio_info structure. As the event_attrs field of
iio_info structures is constant, so these attribute_group structures can
also be declared constant. Done using coccinelle:

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct attribute_group i@p = {...};

@ok1@
identifier r1.i;
position p;
struct iio_info x;
@@
x.event_attrs=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct attribute_group i={...};

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct attribute_group i;

File size before:
   text    data     bss     dec     hex filename
  36951     448       0   37399    9217 drivers/iio/adc/max1363.o

File size after:
   text	   data	    bss	    dec	    hex	filename
  37015	    384	      0	  37399	   9217	drivers/iio/adc/max1363.o
Signed-off-by: Nsimran singhal <singhalsimran0@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Check for attribute_group structures that are only stored in the
event_attrs filed of iio_info structure. As the event_attrs field of
iio_info structures is constant, so these attribute_group structures can
also be declared constant. Done using coccinelle:

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct attribute_group i@p = {...};

@ok1@
identifier r1.i;
position p;
struct iio_info x;
@@
x.event_attrs=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct attribute_group i={...};

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct attribute_group i;

File size before:
   text    data     bss     dec     hex filename
   3046     360       0    3406     d4e drivers/iio/dac/ad5504.o

File size after:
   text	   data	    bss	    dec	    hex	filename
   3110	    296	      0	   3406	    d4e	drivers/iio/dac/ad5504.o
Signed-off-by: Nsimran singhal <singhalsimran0@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Environmental humidity sensor is a hid defined sensor,
it shows raw humidity measurement of air.

More information can be found in:
http://www.usb.org/developers/hidpage/HUTRR39b.pdf

According to IIO ABI definition, humidityrelative data output unit is
milli percent. Add the unit convert from percent to milli percent.
Signed-off-by: NSong Hongyan <hongyan.song@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Scale value include two parts: unit conversion and exponent conversion.
Add gravity unit convert table to fix gravity sensor scale value not
right issue.
Signed-off-by: NSong Hongyan <hongyan.song@intel.com>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch adds support for STMicro VL6180 - ALS, range and proximity sensor. Sensor is capable of measuring the light
intensity as well as object distance using TOF (Time of Flight) technology.
Signed-off-by: NManivannan Sadhasivam <manivannanece23@gmail.com>
Signed-off-by: NPeter Meerwald-Stadler <pmeerw@pmeerw.net>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Use resourced managed function devm_iio_triggered_buffer_setup
to make error path simpler and be able to get rid of the remove
function.
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch adds calibration for the Meson SAR ADC.
Points 25% vref and 75% vref are used for calibration.
It uses a simple linear calibration function: SCALE * val + BIAS

Successfully tested on a Odroid C2.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add support for Linear Technology LTC2632 (SPI) family of·
dual 12- 10-, and 8-bits output DACs.
Signed-off-by: NMaxime Roussin-Belanger <maxime.roussinbelanger@gmail.com>
Signed-off-by: NJean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The driver has a OF device ID table but the struct i2c_driver
.of_match_table field is not set.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>