Currently when memory usage exceeds memory cgroup limit, memory cgroup
just can do sync direct reclaim.  This may incur unexpected stall on
some applications which are sensitive to latency.  Introduce background
async page reclaim mechanism, like what kswapd does.

Define memcg memory usage water mark by introducing wmark_ratio interface,
which is from 0 to 100 and represents percentage of max limit.  The
wmark_high is calculated by (max * wmark_ratio / 100), the wmark_low is
(wmark_high - wmark_high >> 8), which is an empirical value.  If wmark_ratio
is 0, it means water mark is disabled, both wmark_low and wmark_high is max,
which is the default value.

If wmark_ratio is setup, when charging page, if usage is greater than
wmark_high, which means the available memory of memcg is low, a work
would be scheduled to do background page reclaim until memory usage is
reduced to wmark_low if possible.

Define a dedicated unbound workqueue for scheduling water mark reclaim
works.
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>

Memory controller implements the memory.low best-effort memory
protection mechanism, which works perfectly in many cases and allows
protecting working sets of important workloads from sudden reclaim.

But its semantics has a significant limitation: it works only as long as
there is a supply of reclaimable memory.  This makes it pretty useless
against any sort of slow memory leaks or memory usage increases.  This
is especially true for swapless systems.  If swap is enabled, memory
soft protection effectively postpones problems, allowing a leaking
application to fill all swap area, which makes no sense.  The only
effective way to guarantee the memory protection in this case is to
invoke the OOM killer.

It's possible to handle this case in userspace by reacting on MEMCG_LOW
events; but there is still a place for a fail-safe in-kernel mechanism
to provide stronger guarantees.

This patch introduces the memory.min interface for cgroup v2 memory
controller.  It works very similarly to memory.low (sharing the same
hierarchical behavior), except that it's not disabled if there is no
more reclaimable memory in the system.

If cgroup is not populated, its memory.min is ignored, because otherwise
even the OOM killer wouldn't be able to reclaim the protected memory,
and the system can stall.

[guro@fb.com: s/low/min/ in docs]
Link: http://lkml.kernel.org/r/20180510130758.GA9129@castle.DHCP.thefacebook.com
Link: http://lkml.kernel.org/r/20180509180734.GA4856@castle.DHCP.thefacebook.comSigned-off-by: NRoman Gushchin <guro@fb.com>
Reviewed-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch aims to address an issue in current memory.low semantics,
which makes it hard to use it in a hierarchy, where some leaf memory
cgroups are more valuable than others.

For example, there are memcgs A, A/B, A/C, A/D and A/E:

  A      A/memory.low = 2G, A/memory.current = 6G
 //\\
BC  DE   B/memory.low = 3G  B/memory.current = 2G
         C/memory.low = 1G  C/memory.current = 2G
         D/memory.low = 0   D/memory.current = 2G
	 E/memory.low = 10G E/memory.current = 0

If we apply memory pressure, B, C and D are reclaimed at the same pace
while A's usage exceeds 2G.  This is obviously wrong, as B's usage is
fully below B's memory.low, and C has 1G of protection as well.  Also, A
is pushed to the size, which is less than A's 2G memory.low, which is
also wrong.

A simple bash script (provided below) can be used to reproduce
the problem. Current results are:
  A:    1430097920
  A/B:  711929856
  A/C:  717426688
  A/D:  741376
  A/E:  0

To address the issue a concept of effective memory.low is introduced.
Effective memory.low is always equal or less than original memory.low.
In a case, when there is no memory.low overcommittment (and also for
top-level cgroups), these two values are equal.

Otherwise it's a part of parent's effective memory.low, calculated as a
cgroup's memory.low usage divided by sum of sibling's memory.low usages
(under memory.low usage I mean the size of actually protected memory:
memory.current if memory.current < memory.low, 0 otherwise).  It's
necessary to track the actual usage, because otherwise an empty cgroup
with memory.low set (A/E in my example) will affect actual memory
distribution, which makes no sense.  To avoid traversing the cgroup tree
twice, page_counters code is reused.

Calculating effective memory.low can be done in the reclaim path, as we
conveniently traversing the cgroup tree from top to bottom and check
memory.low on each level.  So, it's a perfect place to calculate
effective memory low and save it to use it for children cgroups.

This also eliminates a need to traverse the cgroup tree from bottom to
top each time to check if parent's guarantee is not exceeded.

Setting/resetting effective memory.low is intentionally racy, but it's
fine and shouldn't lead to any significant differences in actual memory
distribution.

With this patch applied results are matching the expectations:
  A:    2147930112
  A/B:  1428721664
  A/C:  718393344
  A/D:  815104
  A/E:  0

Test script:
  #!/bin/bash

  CGPATH="/sys/fs/cgroup"

  truncate /file1 --size 2G
  truncate /file2 --size 2G
  truncate /file3 --size 2G
  truncate /file4 --size 50G

  mkdir "${CGPATH}/A"
  echo "+memory" > "${CGPATH}/A/cgroup.subtree_control"
  mkdir "${CGPATH}/A/B" "${CGPATH}/A/C" "${CGPATH}/A/D" "${CGPATH}/A/E"

  echo 2G > "${CGPATH}/A/memory.low"
  echo 3G > "${CGPATH}/A/B/memory.low"
  echo 1G > "${CGPATH}/A/C/memory.low"
  echo 0 > "${CGPATH}/A/D/memory.low"
  echo 10G > "${CGPATH}/A/E/memory.low"

  echo $$ > "${CGPATH}/A/B/cgroup.procs" && vmtouch -qt /file1
  echo $$ > "${CGPATH}/A/C/cgroup.procs" && vmtouch -qt /file2
  echo $$ > "${CGPATH}/A/D/cgroup.procs" && vmtouch -qt /file3
  echo $$ > "${CGPATH}/cgroup.procs" && vmtouch -qt /file4

  echo "A:   " `cat "${CGPATH}/A/memory.current"`
  echo "A/B: " `cat "${CGPATH}/A/B/memory.current"`
  echo "A/C: " `cat "${CGPATH}/A/C/memory.current"`
  echo "A/D: " `cat "${CGPATH}/A/D/memory.current"`
  echo "A/E: " `cat "${CGPATH}/A/E/memory.current"`

  rmdir "${CGPATH}/A/B" "${CGPATH}/A/C" "${CGPATH}/A/D" "${CGPATH}/A/E"
  rmdir "${CGPATH}/A"
  rm /file1 /file2 /file3 /file4

Link: http://lkml.kernel.org/r/20180405185921.4942-2-guro@fb.comSigned-off-by: NRoman Gushchin <guro@fb.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch renames struct page_counter fields:
  count -> usage
  limit -> max

and the corresponding functions:
  page_counter_limit() -> page_counter_set_max()
  mem_cgroup_get_limit() -> mem_cgroup_get_max()
  mem_cgroup_resize_limit() -> mem_cgroup_resize_max()
  memcg_update_kmem_limit() -> memcg_update_kmem_max()
  memcg_update_tcp_limit() -> memcg_update_tcp_max()

The idea behind this renaming is to have the direct matching
between memory cgroup knobs (low, high, max) and page_counters API.

This is pure renaming, this patch doesn't bring any functional change.

Link: http://lkml.kernel.org/r/20180405185921.4942-1-guro@fb.comSigned-off-by: NRoman Gushchin <guro@fb.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

page_counter_try_charge() currently returns 0 on success and -ENOMEM on
failure, which is surprising behavior given the function name.

Make it follow the expected pattern of try_stuff() functions that return a
boolean true to indicate success, or false for failure.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The unified hierarchy interface for memory cgroups will no longer use "-1"
to mean maximum possible resource value.  In preparation for this, make
the string an argument and let the caller supply it.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As charges now pin the css explicitely, there is no more need for kmemcg
to acquire a proxy reference for outstanding pages during offlining, or
maintain state to identify such "dead" groups.

This was the last user of the uncharge functions' return values, so remove
them as well.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NVladimir Davydov <vdavydov@parallels.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Memory is internally accounted in bytes, using spinlock-protected 64-bit
counters, even though the smallest accounting delta is a page.  The
counter interface is also convoluted and does too many things.

Introduce a new lockless word-sized page counter API, then change all
memory accounting over to it.  The translation from and to bytes then only
happens when interfacing with userspace.

The removed locking overhead is noticable when scaling beyond the per-cpu
charge caches - on a 4-socket machine with 144-threads, the following test
shows the performance differences of 288 memcgs concurrently running a
page fault benchmark:

vanilla:

   18631648.500498      task-clock (msec)         #  140.643 CPUs utilized            ( +-  0.33% )
         1,380,638      context-switches          #    0.074 K/sec                    ( +-  0.75% )
            24,390      cpu-migrations            #    0.001 K/sec                    ( +-  8.44% )
     1,843,305,768      page-faults               #    0.099 M/sec                    ( +-  0.00% )
50,134,994,088,218      cycles                    #    2.691 GHz                      ( +-  0.33% )
   <not supported>      stalled-cycles-frontend
   <not supported>      stalled-cycles-backend
 8,049,712,224,651      instructions              #    0.16  insns per cycle          ( +-  0.04% )
 1,586,970,584,979      branches                  #   85.176 M/sec                    ( +-  0.05% )
     1,724,989,949      branch-misses             #    0.11% of all branches          ( +-  0.48% )

     132.474343877 seconds time elapsed                                          ( +-  0.21% )

lockless:

   12195979.037525      task-clock (msec)         #  133.480 CPUs utilized            ( +-  0.18% )
           832,850      context-switches          #    0.068 K/sec                    ( +-  0.54% )
            15,624      cpu-migrations            #    0.001 K/sec                    ( +- 10.17% )
     1,843,304,774      page-faults               #    0.151 M/sec                    ( +-  0.00% )
32,811,216,801,141      cycles                    #    2.690 GHz                      ( +-  0.18% )
   <not supported>      stalled-cycles-frontend
   <not supported>      stalled-cycles-backend
 9,999,265,091,727      instructions              #    0.30  insns per cycle          ( +-  0.10% )
 2,076,759,325,203      branches                  #  170.282 M/sec                    ( +-  0.12% )
     1,656,917,214      branch-misses             #    0.08% of all branches          ( +-  0.55% )

      91.369330729 seconds time elapsed                                          ( +-  0.45% )

On top of improved scalability, this also gets rid of the icky long long
types in the very heart of memcg, which is great for 32 bit and also makes
the code a lot more readable.

Notable differences between the old and new API:

- res_counter_charge() and res_counter_charge_nofail() become
  page_counter_try_charge() and page_counter_charge() resp. to match
  the more common kernel naming scheme of try_do()/do()

- res_counter_uncharge_until() is only ever used to cancel a local
  counter and never to uncharge bigger segments of a hierarchy, so
  it's replaced by the simpler page_counter_cancel()

- res_counter_set_limit() is replaced by page_counter_limit(), which
  expects its callers to serialize against themselves

- res_counter_memparse_write_strategy() is replaced by
  page_counter_limit(), which rounds down to the nearest page size -
  rather than up.  This is more reasonable for explicitely requested
  hard upper limits.

- to keep charging light-weight, page_counter_try_charge() charges
  speculatively, only to roll back if the result exceeds the limit.
  Because of this, a failing bigger charge can temporarily lock out
  smaller charges that would otherwise succeed.  The error is bounded
  to the difference between the smallest and the biggest possible
  charge size, so for memcg, this means that a failing THP charge can
  send base page charges into reclaim upto 2MB (4MB) before the limit
  would have been reached.  This should be acceptable.

[akpm@linux-foundation.org: add includes for WARN_ON_ONCE and memparse]
[akpm@linux-foundation.org: add includes for WARN_ON_ONCE, memparse, strncmp, and PAGE_SIZE]
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NVladimir Davydov <vdavydov@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>