- 06 12月, 2009 40 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Adds support to VC211A em2800 card. As this board doesn't have eeprom, and uses a common set of i2c address, it has no way to add any autodetection for it. The patch were tested by me and by Raimundo on his board. Thanks to those tests, several bugs related to em2800 support were corrected. for producing the usbsnoop dump, used to get the gpio's and allowing me to remotelly access his machine and to the needed tests. Thanks-to: Raimundo Eduvirgnes de Oliveira <eduvirgens@yahoo.com.br> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Since em2800 can't support 720x480 / 720x576, the driver used to reduce the scale to half the size on those chips. As the proper fix were applied, reducing the maximum horizontal resolution to 640, this hack can be removed. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
With em2800 hardware, AC97 hardware can be detected even when it doesn't exist. If, after probing for AC97, the driver won't find a companion chip, simply prevents the load of the audio modules. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Due to hardware limitation, em2800 chips can't work at resolutions higher than 640x576, since the URB packet size is not enough. The effect is that the image looses packages and shows a distortion along the vertical axes. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Fix this compile warning: v4l/dvb-bt8xx.c: In function 'cx24108_tuner_set_params': v4l/dvb-bt8xx.c:221: warning: array subscript is above array bounds Make sure that we never get past the last element in the array. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Trivial fix for these bogus compile warnings: v4l/va1j5jf8007s.c: In function 'va1j5jf8007s_tune': v4l/va1j5jf8007s.c:394: warning: 'lock' may be used uninitialized in this function v4l/va1j5jf8007t.c: In function 'va1j5jf8007t_tune': v4l/va1j5jf8007t.c:273: warning: 'lock' may be used uninitialized in this function v4l/va1j5jf8007t.c:273: warning: 'retry' may be used uninitialized in this function These variables are never used uninitialized, but the compiler couldn't figure that out unfortunately. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Trivial fix for this bogus compile warning: v4l/dib8000.c:958: warning: 'ncoeff' may be used uninitialized in this function Note: ncoeff is never used uninitialized, but the compiler couldn't figure that out. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
This prepares the pms driver for the v4l1 -> v4l2 conversion. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The bNrInPins and baSourceID fields are common among all entities (some of use bSourceID but this is conceptually the same). Move those two fields out of entity type-specific unions into the uvc_entity structure top level. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Don't handle the first output terminal in a chain in a special way. Use uvc_scan_chain_entity() like for all other entities, making the chain scan code more generic. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The bNrInPins field is an 8 bit integer, not a 16 bit integer. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
All terminals and units are now added to a single linked list of entities per chain. This makes terminals and units handling code more generic. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The Genius eFace 2025 (0458:706e) requires the MINMAX quirk. Add a corresponding entry in the device IDs list. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Gary Francis 提交于
These are additional fixes to enable proper pvrusb2 support of 16KB sized FX2 firmware. Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mike Isely 提交于
Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mike Isely 提交于
Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mike Isely 提交于
The device text description in pvrusb2-devattr.c get mapped into a V4L API string field that is unfortunately shorter than I expected. No sense fighting City Hall here - this change shortens the descriptions to fit the limit. Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mike Isely 提交于
This pvrusb2 change is in support of an existing feature used to help identify and locate newer vendor supplied firmware. This change makes the feature work for the newer larger firmware size. Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mike Isely 提交于
New FX2 firmware from Hauppauge is no longer 8KB in size - it's 16KB. This is true for HVR-1950 and HVR-1900 devices. Without this change, new pvrusb2 users with that hardware are unable to use the driver (because the CD shipped with the hardware only has the 16KB firmware). Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Igor M. Liplianin 提交于
The new hardware design applied for this cards. Silicon Labs C8051F300 microcontroller is used for LNB power control. It connected to cx23885 GPIO pins: GPIO0 - P0.3 data GPIO1 - P0.2 reset GPIO2 - P0.1 clk GPIO3 - P0.0 busy Tevii S470 based on Montage Technology M88TS2020 digital satellite tuner and M88DS3000 advanced DVB-S/S2 demodulator. Signed-off-by: NIgor M. Liplianin <liplianin@me.by> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Fix this trivial compile warning: v4l/atbm8830.c:164: warning: 'set_agc_config' defined but not used Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Fix this trivial compile warning: v4l/cxusb.c:1195: warning: unused variable 'n' Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The cx18 av core implemented an init call for no good reason. It's now turned into an internal function. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Reviewed-by: NAndy Walls <awalls@radix.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Vaibhav Hiremath 提交于
Added support for Control IOCTL, - s_ctrl - g_ctrl - queryctrl Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Vaibhav Hiremath 提交于
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Vaibhav Hiremath 提交于
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Vaibhav Hiremath 提交于
The I2C adapter ID is actually depends on Board and may vary, Davinci uses id=1, but in case of AM3517 id=3. Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Vaibhav Hiremath 提交于
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-