Remove second host1x driver, and bind tegra-drm to the new host1x
driver. The logic to parse device tree and track clients is moved
to drm.c.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Both host1x and drm drivers have host1x structures. This patch
renames the host1x structure under drm to follow name host1x_drm.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Make drm part of host1x driver.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Add support for host1x debugging. Adds debugfs entries, and dumps
channel state to UART in case of stuck job.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Add support for host1x client modules, and host1x channels to submit
work to the clients.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Add support for sync point interrupts, and sync point wait. Sync
point wait used interrupts for unblocking wait.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Add host1x, the driver for host1x and its client unit 2D. The Tegra
host1x module is the DMA engine for register access to Tegra's
graphics- and multimedia-related modules. The modules served by
host1x are referred to as clients. host1x includes some other
functionality, such as synchronization.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Reported-by: Randy Dunlap
Signed-off-by: NDave Airlie <airlied@redhat.com>

Patrik writes:

I haven't had much review or testing on other platforms than Poulsbo but
at least the following Cedarview bug has been squashed and no
regressions reported: https://bugs.freedesktop.org/show_bug.cgi?id=58527

* 'gma500-next' of git://github.com/patjak/drm-gma500:
  drm/gma500: Add debugging info to psb_gtt_restore()
  drm/gma500: Check connector status before restoring sdvo
  gma500:fix build failure for 3.9-rc5
  drm/gma500: Fix hibernation problems on sdvo encoders
  drm/gma500: Add hooks for hibernation
  drm/gma500: Activate the gtt rebuild on suspend/resume
  drm/gma500: Add support for rebuilding the gtt
  drm/gma500: Change fb name so pm-utils doesn't apply quirks
  gma500: Make VGA and HDMI connector hotpluggable
  drm/gma500: Clean up various defines
  drm/gma500: Remove unnecessary function exposure
  drm/gma500: Type clock limits directly into array and remove defines
  drm/gma500: Calculate clock in one function instead of three identical
  drm/gma500: Remove unused i8xx clock limits
  gma500: medfield: Fix possible NULL pointer dereference
  drivers: gpu: drm: gma500: Replaced calls kzalloc & memcpy with kmemdup
  gma500: remove unused drm_psb_no_fb

Alex writes:
This is the initial 3.10 pull request for radeon.  The big changes here
are UVD support and proper tiling support for SI.  The rest is
bug fixes.  I hope to have another pull request later in the week with
some new things we've been working on internally.

* 'drm-next-3.10' of git://people.freedesktop.org/~agd5f/linux: (28 commits)
  drm/radeon: Always flush the VM
  drm/radeon: re-enable PTE/PDE packet for set_page on cayman/TN
  drm/radeon: cleanup properly if mmio mapping fails
  drm/radeon/evergreen+: don't enable HPD interrupts on eDP/LVDS
  drm/radeon: add si tile mode array query v3
  drm/radeon: add ring working query
  drm/radeon: handle broken disabled rb mask gracefully
  drm/radeon: add pcie set/get lanes callbacks for newer asics
  drm/radeon: update r600 set/get pcie lane config
  drm/radeon/kms: replace *REG32_PCIE_P with *REG32_PCIE_PORT
  drm/radeon: remove unused blit remnants from si.c
  drm/radeon: add UVD tiling addr config v2
  drm/radeon: init UVD clocks to sane defaults
  drm/radeon: add set_uvd_clocks callback for r7xx v3
  drm/radeon: add set_uvd_clocks callback for SI
  drm/radeon: add set_uvd_clocks callback for evergreen
  drm/radeon: add set_uvd_clocks callback for ON/LN/TN (v4)
  drm/radeon: add radeon_atom_get_clock_dividers helper
  drm/radeon: add pm callback for setting uvd clocks
  drm/radeon: UVD bringup v8
  ...

This is slightly cleaned up version of Jerome's patch.
There seems to be an issue tracking the last flush of
the VM which results in hangs in certain cases when
VM is used.  For now just flush the VM for every IB.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=62959
https://bugs.freedesktop.org/show_bug.cgi?id=62997Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

PTE/PDE doesn't support a single update (count = 1).  We had
previously disabled it since it we were hitting that case which
let to hangs.  The PTE/PDE packet is much more efficient for VM
updates where it can be used.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/qxl/qxl_display.c:99 qxl_alloc_client_monitors_config() error: dereferencing freed memory 'qdev->client_monitors_config'
drivers/gpu/drm/qxl/qxl_object.c:66 qxl_ttm_placement_from_domain() warn: bitwise AND condition is false here
drivers/gpu/drm/qxl/qxl_ioctl.c:353 qxl_clientcap_ioctl() warn: buffer overflow 'qdev->rom->client_capabilities' 58 <= 58
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

/usr/lib/gcc/x86_64-linux-gnu/4.7/include/stddef.h:414:9: sparse: preprocessor token offsetof redefined
include/linux/stddef.h:17:9: this was the original definition
>> drivers/gpu/drm/qxl/qxl_drv.c:49:5: sparse: symbol 'qxl_modeset' was not declared. Should it be static?

Reported-by: kbuild test robot.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Omapdss patches for 3.10 merge window

The biggest changes are:

* DSI video mode: automatic clock and timing calculation
* Lots of platform data related panel driver cleanups, to prepare for DT

* tag 'omapdss-for-3.10' of git://gitorious.org/linux-omap-dss2/linux: (69 commits)
  drm/omap: add statics to a few structs
  drm/omap: Fix and improve crtc and overlay manager correlation
  drm/omap: Take a fb reference in omap_plane_update()
  drm/omap: Make fixed resolution panels work
  drm/omap: fix modeset_init if a panel doesn't satisfy omapdrm requirements
  OMAPDSS: DPI: widen the pck search when using dss fck
  OMAPDSS: fix dss_fck clock rate rounding
  omapdss: use devm_clk_get()
  OMAPDSS: nec-nl8048 panel: Use dev_pm_ops
  OMAPDSS: DISPC: Revert to older DISPC Smart Standby mechanism for OMAP5
  OMAPDSS: DISPC: Configure doublestride for NV12 when using 2D Tiler buffers
  omapdss: Features: Fix some parameter ranges
  omapdss: DISPC: add max pixel clock limits for LCD and TV managers
  OMAPDSS: DSI: Use devm_clk_get()
  drivers: video: omap2: dss: Use PTR_RET function
  OMAPDSS: VENC: remove platform_enable/disable calls
  OMAPDSS: n8x0 panel: remove use of platform_enable/disable
  OMAPDSS: n8x0 panel: handle gpio data in panel driver
  OMAPDSS: picodlp panel: remove platform_enable/disable callbacks
  OMAPDSS: picodlp panel: handle gpio data in panel driver
  ...

Userspace is free to pass in any command bits it feels like through the
ioctl cmd, and for example trinity likes to fuzz those bits to create
conflicting commands. So instead of relying upon userspace to pass along
the correct IN/OUT flags for the ioctl, use the flags as expected by the
kernel.

This does have a side-effect that NULL pointers can not be substituted
by userspace in place of a struct. This feature was not being used by
any driver, but instead exposed all of the command handlers to a user
triggerable OOPS.
Reported-by: NTommi Rantala <tt.rantala@gmail.com>
Link: http://lkml.kernel.org/r/CA+ydwtpuBvbwxbt-tdgPUvj1EU7itmCHo_2B3w13HkD5+jWKow@mail.gmail.comSigned-off-by: NTommi Rantala <tt.rantala@gmail.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

An ifdef in drm.h expects to be compiled with full-fledged Linux
toolchain, but it's common to compile kernel with just bare-metal
toolchain which doesn't define __linux__. So, also add __KERNEL__
check.

[nm@ti.com: port forward to 3.9-rc6 and post to dri devel for feedback as RFC]
Signed-off-by: NPaul Sokolovsky <paul.sokolovsky@linaro.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

(*->vm_end - *->vm_start) >> PAGE_SHIFT operation is implemented
as a inline funcion vma_pages() in linux/mm.h, so using it.
Signed-off-by: NLibin <huawei.libin@huawei.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Property blob objects need to be destroyed when cleaning up to avoid
memory leaks. Go through the list of all blobs in the
drm_mode_config_cleanup() function and destroy them.

The drm_mode_config_cleanup() function needs to be moved after the
drm_property_destroy_blob() declaration. Move drm_mode_config_init() as
well to keep the functions together.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-next-2013-04-06' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Daniel writes:
Since I expect Linus to open the merge window in about a week I guess this
is the last i915 feature pull for 3.10. Highlights:
Updated testing tree for -next. Highlights:
- Corner case fixes discovered with static analyzers (Damien).
- More fixes to combat unclaimed register errors on Haswell (Paulo).
- Some small fixes to the gpu turbo code (Rodrigo+Ben), Ben has more
  fixes for overclocking support pending.
- More prep work for fastboot from Chris.
- VT-switchless suspend/resume from Jesse.
- The prep work of Egbert Eich's hpd irq storm handling. Hopefully we can
  squeeze in the actual storm handling code for 3.10 ...
- More convenience helpers for Imre's sg iterator. Core parts acked by
  Andrew Morton.
- A bit of backlight code cleanup from Jani.
- Fixed ilk gpu reset (Jesse).
- Reduced color range handling fixes for VLV (Ville).

The big item here is though the introduction of pipe_config to properly
pre-compute the desired modeset state before touching the hw. Together
with some very basic support to read out the current config from the hw
and compare the state with the sw tracking. This is all prep work for more
reliable fastboot, atomic modesets and other cool features. Stuff
converted to the new world includes:
- Most simple pipe attributes (reduce color range, pixel multiplier).
- Pipe bpp/dither handling.
- Some convenience flags like ->has_pch_encoder to simplify the code flow.
- (Almost) DP clock handling, had to be reverted since part of a prep
  patch was lost in rebasing ...
Expect a lot of patches for this throughout 3.11, there's tons of work
till we have all state properly tracked for fastbooting to woExpect a lot
of patches for this throughout 3.11, there's tons of work till we have all
state properly tracked for fastbooting to work.

For 3.10 I have a bunch of fixes queued up and I plan to send them all out
at the end of this week. I need to shuffle patches in my -next queue a bit
so that we don't but feature-y stuff in there, too. The main thing I'd
like to sneak in is Egbert's hpd irq storm handling, which should be
pretty low-risk since all the infrastructure work has landed already. I
also have the oops fix pending, but that only mustered review before the
w/e and giving how hairy that part of our modeset code is, I want to give
it some more testing before forwarding.

Note: annarchy.fd.o seems to run out of disk space, so couldn't push the
usual for-airlied branch. Tag should work though.

Note 2: I've had to do a backmerge since conflicts grew too ugly, but the
upstream -rc I've backmerged is already in your drm-next.

* tag 'drm-intel-next-2013-04-06' of git://people.freedesktop.org/~danvet/drm-intel: (75 commits)
  drm/i915: info level for simulated gpu hang dmesg notice
  drm/i915: revert eDP bpp clamping code changes
  Revert "drm/i915: fix DP get_hw_state return value"
  drm/i915: Don't use the HDMI port color range bit on Valleyview
  drm/i915: Set PIPECONF color range bit on Valleyview
  drm/i915: extract i9xx_set_pipeconf
  drm/i915: Add no-lvds quirk for Fujitsu Esprimo Q900
  drm/i915: create pipe_config->dpll for clock state
  drm/i915: hw readout support for ->has_pch_encoders
  drm/i915: add hw state readout/checking for pipe_config
  drm/i915: rip out superflous is_dp&is_cpu_edp tracking
  drm/i915: remove leaky eDP functions
  drm/i915: track dp target_clock in pipe_config
  drm/i915: move dp_m_n computation to dp_encoder->compute_config
  drm/i915: clear up the fdi/dp set_m_n confusion
  drm/i915: Fix sdvo connector get_hw_state function
  drm/i915: drop DPFLIPSTAT enables on VLV v3
  drm/i915: add Punit read/write routines for VLV v2
  drm/i915: panel power sequencing for VLV eDP v2
  drm/i915/dp: fix up VLV DP handling v2
  ...

This makes it easier to see what's going on during resume/restore.
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

This patch fixes a bug introduced by:

commit 749387dc
Author: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Date:   Sun Apr 7 16:35:50 2013 +0200
drm/gma500: Fix hibernation problems on sdvo encoders

The bug is triggered when we do a mode set on a sdvo encoder with all
connectors in the disconnected state. A crtc is considered enabled by
drm even though all of its connectors are disconnected. Work around
this by adding a check in our sdvo restore function.

Also remove the unneeded dpms on. Prepare and Commit will take care of
that.
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

If we fail to map the mmio BAR, skip driver tear down
that requires mmio.

Should fix:
https://bugzilla.kernel.org/show_bug.cgi?id=56541Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Avoids potential interrupt storms when the display is disabled.

May fix:
https://bugzilla.kernel.org/show_bug.cgi?id=56041Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm_framebuffer_lookup() does a kref_get() for the framebuffer if it finds one
corresponding to the fb id passed to it. Use drm_framebuffer_reference() instead
for clarity since it's the function used in other places to take a reference.
Signed-off-by: NArchit Taneja <archit@ti.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NChristopher Harvey <charvey@matrox.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NChristopher Harvey <charvey@matrox.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The 1600x1200 (UXGA) screen resolution was lacking in the set of
built-in selectable EDID screen resolutions that can be used to
repair misbehaving monitor firmware.

This patch adds the related data set and expands the documentation.
Signed-off-by: NCarsten Emde <C.Emde@osadl.org>
Acked-by: NPaul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

In order to make it easier to port the code to other operating systems
(like the BSDs), relicense the HDMI helpers under the more permissive
MIT license.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.

The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.

The releases are freed from a workqueue that wakes up and processes the
release ring.

releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.

The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.

This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.

Authors: Dave Airlie, Alon Levy

v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
      don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

qxl wants to use io mapping like i915 gem does, for now
just export the symbols so the driver can implement atomic
page maps using io mapping.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Allow userspace to query for the tile mode array so userspace can properly
compute surface pitch and alignment requirement depending on tiling.

v2: Make strict aliasing safer by casting to char when copying
v3: merge fix from Christian
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add new ioctl option and bumb minor version number.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If the disabled rb mask register is not properly initialized
program a sane default based on the number of RBs for the
asic.  This avoids a potential divide by 0 when calculating
the backend mask.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some static structs are not marked as static. Add it.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omapdrm driver currently takes a config/module arg to figure out the number
of crtcs it needs to create. We could create as many crtcs as there are overlay
managers in the DSS hardware, but we don't do that because each crtc eats up
one DSS overlay, and that reduces the number of planes we can attach to a single
crtc.

Since the number of crtcs may be lesser than the number of hardware overlay
managers, we need to figure out which overlay managers to use for our crtcs. The
current approach is to use pipe2chan(), which returns a higher numbered manager
for the crtc.

The problem with this approach is that it assumes that the overlay managers we
choose will connect to the encoders the platform's panels are going to use,
this isn't true, an overlay manager connects only to a few outputs/encoders, and
choosing any overlay manager for our crtc might lead to a situation where the
encoder cannot connect to any of the crtcs we have chosen. For example, an
omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the
current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot
connect to the hdmi encoder at all. The only manager that could have connected
to hdmi was the TV overlay manager.

Therefore, there is a need to choose our overlay managers keeping in mind the
panels we have on that platform. The new approach iterates through all the
available panels, creates encoders and connectors for them, and then tries to
get a suitable overlay manager to create a crtc which can connect to the
encoders.

We use the dispc_channel field in omap_dss_output to retrieve the desired
overlay manager's channel number, we then check whether the manager had already
been assigned to a crtc or not. If it was already assigned to a crtc, we assume
that out of all the encoders which intend use this crtc, only one will run at a
time. If the overlay manager wan't assigned to a crtc till then, we create a
new crtc and link it with the overlay manager.

This approach just looks for the best dispc_channel for each encoder. On DSS HW,
some encoders can connect to multiple overlay managers. Since we don't try
looking for alternate overlay managers, there is a greater possibility that 2
or more encoders end up asking for the same crtc, causing only one encoder to
run at a time.

Also, this approach isn't the most optimal one, it can do either good or bad
depending on the sequence in which the panels/outputs are parsed. The optimal
way would be some sort of back tracking approach, where we improve the set of
managers we use as we iterate through the list of panels/encoders. That's
something left for later.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

When userspace calls SET_PLANE ioctl, drm core takes a reference of the fb and
passes control to the update_plane op defined by the drm driver.

In omapdrm, we have a worker thread which queues framebuffers objects received
from update_plane and displays them at the appropriate time.

It is possible that the framebuffer is destoryed by userspace between the time
of calling the ioctl and apply-worker being scheduled. If this happens, the
apply-worker holds a pointer to a framebuffer which is already destroyed.

Take an extra refernece/unreference of the fb in omap_plane_update() to prevent
this from happening. A reference is taken of the fb passed to update_plane(),
the previous framebuffer (held by plane->fb) is unreferenced. This will prevent
drm from destroying the framebuffer till the time it's unreferenced by the
apply-worker.

This is in addition to the exisitng reference/unreference in update_pin(),
which is taken for the scanout of the plane's current framebuffer, and an
unreference the previous framebuffer.
Signed-off-by: NArchit Taneja <archit@ti.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omapdrm driver requires omapdss panel drivers to expose ops like detect,
set_timings and check_timings. These can be NULL for fixed panel DPI, DBI, DSI
and SDI drivers. At some places, there are no checks to see if the panel driver
has these ops or not, and that leads to a crash.

The following things are done to make fixed panels work:

- The omap_connector's detect function is modified such that it considers panel
  types which are generally fixed panels as always connected(provided the panel
  driver doesn't have a detect op). Hence, the connector corresponding to these
  panels is always in a 'connected' state.

- If a panel driver doesn't have a check_timings op, assume that it supports the
  mode passed to omap_connector_mode_valid(the 'mode_valid' drm helper function)

- The function omap_encoder_update shouldn't really do anything for fixed
  resolution panels, make sure that it calls set_timings only if the panel
  driver has one.
Signed-off-by: NArchit Taneja <archit@ti.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>