Since setting an encryption policy requires writing metadata to the
filesystem, it should be guarded by mnt_want_write/mnt_drop_write.
Otherwise, a user could cause a write to a frozen or readonly
filesystem.  This was handled correctly by f2fs but not by ext4.  Make
fscrypt_process_policy() handle it rather than relying on the filesystem
to get it right.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org # 4.1+; check fs/{ext4,f2fs}
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Acked-by: NJaegeuk Kim <jaegeuk@kernel.org>

Thread A			Thread B
- inode_lock fileA
				- inode_lock fileB
				 - inode_lock fileA
 - inode_lock fileB

We may encounter above potential deadlock during moving file range in
concurrent scenario. This patch fixes the issue by using inode_trylock
instead.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Only if two input files are regular files, we allow copying data in
range of them, otherwise, deny it.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch implements moving a range of data blocks from source file to
destination file.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

We need to avoid ENOMEM due to unexpected long length.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch reverts 19a5f5e2 (f2fs: drop any block plugging),
and adds blk_plug in write paths additionally.

The main reason is that blk_start_plug can be used to wake up from low-power
mode before submitting further bios.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This reduces the elapsed time to do xfstests/generic/017.

Before: 458 s
After:  390 s
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This reduces the elapsed time to do xfstests/generic/017.

Before: 715 s
After:  458 s
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Let's check inode's dirtiness before calling mark_inode_dirty.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

SetPageUptodate() issues memory barrier, resulting in performance degrdation.
Let's avoid that.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The f2fs_map_blocks is very related to the performance, so let's avoid any
latency to read ahead node pages.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This mount option is to enable original log-structured filesystem forcefully.
So, there should be no random writes for main area.

Especially, this supports host-managed SMR device.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

We don't need lock parameter, which is always true.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If roll-forward recovery can recover i_size, we don't need to update inode's
metadata during fsync.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch reduces to call them across the whole tree.
- sync_inode_page()
- update_inode_page()
- update_inode()
- f2fs_write_inode()

Instead, checkpoint will flush all the dirty inode metadata before syncing
node pages.
Note that, this is doable, since we call mark_inode_dirty_sync() for all
inode's field change which needs to update on-disk inode as well.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch calls mark_inode_dirty_sync() for the following on-disk inode
changes.

 -> largest
 -> ctime/mtime/atime
 -> i_current_depth
 -> i_xattr_nid
 -> i_pino
 -> i_advise
 -> i_flags
 -> i_mode
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch introduces f2fs_i_size_write() to call mark_inode_dirty_sync() with
i_size_write().
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch refactors to use inode pointer for set_inode_flag and
clear_inode_flag.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Let's gather the UUID related functions under one hood.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Given errors, this patch flushes pending bios as soon as possible.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds percpu_counter for # of dirty pages in inode.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch tries to speedup fzero_range by making space preallocation and
address removal of blocks in one dnode page as in batch operation.

In virtual machine, with zram driver:

dd if=/dev/zero of=/mnt/f2fs/file bs=1M count=4096
time xfs_io -f /mnt/f2fs/file -c "fzero 0 4096M"

Before:
real	0m3.276s
user	0m0.008s
sys	0m3.260s

After:
real	0m1.568s
user	0m0.000s
sys	0m1.564s
Signed-off-by: NChao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: consider ENOSPC case]
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

atomic/volatile ioctl interfaces are exposed to user like other file
operation interface, it needs to make them getting exclusion against
to each other to avoid potential conflict among these operations
in concurrent scenario.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In interfaces of ioctl, mnt_{want,drop}_write_file should be used for:
- get exclusion against file system freezing which may used by lvm
  snapshot.
- do telling filesystem that a write is about to be performed on it, and
  make sure that the writes are permitted.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch enables reading node blocks in advance when truncating large
data blocks.

 > time rm $MNT/testfile (500GB) after drop_cachees
Before : 9.422 s
After  : 4.821 s
Reported-by: NStephen Bates <stephen.bates@microsemi.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch is to improve the expand_inode speed in fallocate by allocating
data blocks as many as possible in single locked node page.

In SSD,
 # time fallocate -l 500G $MNT/testfile

Before : 1m 33.410 s
After  : 24.758 s
Reported-by: NStephen Bates <stephen.bates@microsemi.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The following panic occurs when truncating inode which has inline
xattr to max filesize.

[<ffffffffa013d3be>] get_dnode_of_data+0x4e/0x580 [f2fs]
[<ffffffffa013aca1>] ? read_node_page+0x51/0x90 [f2fs]
[<ffffffffa013ad99>] ? get_node_page.part.34+0xb9/0x170 [f2fs]
[<ffffffffa01235b1>] truncate_blocks+0x131/0x3f0 [f2fs]
[<ffffffffa01238e3>] f2fs_truncate+0x73/0x100 [f2fs]
[<ffffffffa01239d2>] f2fs_setattr+0x62/0x2a0 [f2fs]
[<ffffffff811a72c8>] notify_change+0x158/0x300
[<ffffffff8118a42b>] do_truncate+0x6b/0xa0
[<ffffffff8118e539>] ? __sb_start_write+0x49/0x100
[<ffffffff8118a798>] do_sys_ftruncate.constprop.12+0x118/0x170
[<ffffffff8118a82e>] SyS_ftruncate+0xe/0x10
[<ffffffff8169efcf>] tracesys+0xe1/0xe6
[<ffffffffa0139ae0>] get_node_path+0x210/0x220 [f2fs]
 <ffff880206a89ce8>
--[ end trace 5fea664dfbcc6625 ]---

The reason is truncate_blocks tries to truncate all node and data blocks
start from specified block offset with value of (max filesize / block
size), but actually, our valid max block offset is (max filesize / block
size) - 1, so f2fs detects such invalid block offset with BUG_ON in
truncation path.

This patch lets f2fs skip truncating data which is exceeding max
filesize.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The kiocb already has the new position, so use that.  The only interesting
case is AIO, where we currently don't bother updating ki_pos.  We're about
to free the kiocb after we're done, so we might as well update it to make
everyone's life simpler.

While we're at it also return the bytes written argument passed in if
we were successful so that the boilerplate error switch code in the
callers can go away.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This will allow us to do per-I/O sync file writes, as required by a lot
of fileservers or storage targets.

XXX: Will need a few additional audits for O_DSYNC
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

In order to give atomic writes, we should consider power failure during
sync_node_pages in fsync.
So, this patch marks fsync flag only in the last dnode block.
Acked-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The fsync_node_pages should return pass or failure so that user could know
fsync is completed or not.
Acked-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch splits the existing sync_node_pages into (f)sync_node_pages.
The fsync_node_pages is used for f2fs_sync_file only.
Acked-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If somebody wrote some data before atomic writes, we should flush them in order
to handle atomic data in a right period.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The atomic/volatile operation should be done in pair of start and commit
ioctl.
For example, if a killed process remains open-ended atomic operation, we should
drop its flag as well as its atomic data. Otherwise, if sqlite initiates another
operation which doesn't require atomic writes, it will lose every data, since
f2fs still treats with them as atomic writes; nobody will trigger its commit.
Reported-by: NMiao Xie <miaoxie@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

When one reader closes its file while the other writer is doing atomic writes,
f2fs_release_file drops atomic data resulting in an empty commit.
This patch fixes this wrong commit problem by checking openess of the file.

 Process0                       Process1
 				open file
 start atomic write
 write data
 read data
				close file
				f2fs_release_file()
				clear atomic data
 commit atomic write
Reported-by: NMiao Xie <miaoxie@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch synced with the below two ext4 crypto fixes together.

In 4.6-rc1, f2fs newly introduced accessing f_path.dentry which crashes
overlayfs. To fix, now we need to use file_dentry() to access that field.

Fixes: c0a37d48 ("ext4: use file_dentry()")
Fixes: 9dd78d8c ("ext4: use dget_parent() in ext4_file_open()")
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch tries to catch up with lookup and open policies in ext4.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds the renamed functions moved from the f2fs crypto files.

1. definitions for per-file encryption used by ext4 and f2fs.

2. crypto.c for encrypt/decrypt functions
 a. IO preparation:
  - fscrypt_get_ctx / fscrypt_release_ctx
 b. before IOs:
  - fscrypt_encrypt_page
  - fscrypt_decrypt_page
  - fscrypt_zeroout_range
 c. after IOs:
  - fscrypt_decrypt_bio_pages
  - fscrypt_pullback_bio_page
  - fscrypt_restore_control_page

3. policy.c supporting context management.
 a. For ioctls:
  - fscrypt_process_policy
  - fscrypt_get_policy
 b. For context permission
  - fscrypt_has_permitted_context
  - fscrypt_inherit_context

4. keyinfo.c to handle permissions
  - fscrypt_get_encryption_info
  - fscrypt_free_encryption_info

5. fname.c to support filename encryption
 a. general wrapper functions
  - fscrypt_fname_disk_to_usr
  - fscrypt_fname_usr_to_disk
  - fscrypt_setup_filename
  - fscrypt_free_filename

 b. specific filename handling functions
  - fscrypt_fname_alloc_buffer
  - fscrypt_fname_free_buffer

6. Makefile and Kconfig

Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: NMichael Halcrow <mhalcrow@google.com>
Signed-off-by: NIldar Muslukhov <ildarm@google.com>
Signed-off-by: NUday Savagaonkar <savagaon@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Add a new help f2fs_update_data_blkaddr to clean up redundant codes.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>