- 23 9月, 2006 40 次提交
-
-
由 Patrick McHardy 提交于
- fix whitespace error - break lines at 80 characters - reformat some expressions to be more readable Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Also fix some whitespace errors and use the NAT bits instead of deriving the state manually. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Kill listhelp.h and use the list.h functions instead. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Handling of ipip and ip_gre ICMP error relaying is b0rken; it accesses 8bit field + 3 reserved octets as host-endian 32bit, does comparison, subtraction and stuffs the result back. That breaks on big-endian. Fixed, made endian-clean. [ Note that this effected code is permanently commented out with and ifdef, so this error couldn't actually cause problems for anyone. -DaveM ] Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrea Bittau 提交于
Introduce methods which manipulate interesting congestion control state such as pipe and rtt estimate. This is useful for people wishing to monitor the variables of CCID and instrument the code [perhaps using Kprobes]. Personally, I am a fan of encapsulation---that justifies this change =D. Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrea Bittau 提交于
When multiple losses occur in one RTT, the window should be halved only once [a single "congestion event"]. This is now implemented, although not perfectly. Slightly changed the interface for changing the cwnd: pass hctx instead of dp. This is required in order to allow for change_cwnd to be called from _init(). Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrea Bittau 提交于
Allocate more sequence state on demand. Each time a packet is sent out by CCID2, a record of it needs to be kept. This list of records grows proportionally to cwnd. Previously, the length of this list was hardcored and therefore the cwnd could only grow to this value (of 128). Now, records are allocated on demand as necessary---cwnd may grow as it wishes. The exceptional case of when memory is not available is not handled gracefully. Perhaps, cwnd should be capped at that point. Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrea Bittau 提交于
Allow the user to choose whether or not to enable CCID2 debugging via Kconfig. Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrea Bittau 提交于
If not enough cwnd is available, tell the sender to check again as soon as possible. This will increase CPU utilization (polling frequently for cwnd) but will improve network performance. That is, the sender will need to wait less before detecting the increase of cwnd. A better architecture would be for the CCID to call-back (or dequeue) from DCCP when it is able to transmit traffic -- not the other way around as it currently occurs. Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrea Bittau 提交于
Initialize the slow-start threshold to infinity. This way, upon connection initiation, slow-start will be exited only upon a packet loss. This patch will allow connections to quickly gain speed. Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrea Bittau 提交于
Jiffies are now handled correctly (I hope) in CCID2. If they wrap, no problem. Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrea Bittau 提交于
Get rid of unused variables in ackvector state. Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrea Bittau 提交于
Fix the way state is masked out. DCCP_ACKVEC_STATE_NOT_RECEIVED is defined as appears in the packet, therefore bit shifting is not required. This fix allows CCID2 to correctly detect losses. Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrea Bittau 提交于
Fix ackvector length calculation upon receiving an "ack-of-ack". This patch avoids the ackvector from growing too large which causes it to not be inserted into packets. Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Hashing SAs by source address breaks templates with wildcards as tunnel source since the source address used for hashing/lookup is still 0/0. Move source address lookup to xfrm_tmpl_resolve_one() so we can use the real address in the lookup. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Kuznetsov 提交于
It does not affect either mss-sized connections (obviously) or connections controlled by Nagle (because there is only one small segment in flight). The idea is to record the fact that a small segment arrives on a connection, where one small segment has already been received and still not-ACKed. In this case ACK is forced after tcp_recvmsg() drains receive buffer. In other words, it is a "soft" each-2nd-segment ACK, which is enough to preserve ACK clock even when ABC is enabled. Signed-off-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Venkat Yekkirala 提交于
The following fixes a bug where random mem is being tampered with in the non-mls case; encountered by Jashua Brindle on a gentoo box. Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com> Acked-by: NStephen Smalley <sds@tycho.nsa.gov> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Adrian Bunk 提交于
This patch contains the following cleanups: - make the following needlessly global function static: - socket.c: sctp_apply_peer_addr_params() - add proper prototypes for the several global functions in include/net/sctp/sctp.h Note that this fixes wrong prototypes for the following functions: - sctp_snmp_proc_exit() - sctp_eps_proc_exit() - sctp_assocs_proc_exit() The latter was spotted by the GNU C compiler and reported by David Woodhouse. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
iproute2 doesn't provide the NLM_F_CREATE flag when adding addresses, it is assumed to be implied. The existing code issues a check on said flag when the modify operation fails (likely due to ENOENT) before continueing to create it, this leads to a hard to predict result, therefore the NLM_F_CREATE check is removed. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Same behaviour as IPv4, using IFF_UP is a no-no anyway. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Replaces INET6_IFADDR_RTA_SPACE with a new function calculating the total required message size for all address messages. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Brian Haley 提交于
Change some netfilter tunables to __read_mostly. Also fixed some incorrect file reference comments while I was in there. (this will be my last __read_mostly patch unless someone points out something else that needs it) Signed-off-by: NBrian Haley <brian.haley@hp.com> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Brian Haley 提交于
Change sctp globals to __read_mostly. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Brian Haley 提交于
Change some bridge sysctl tunables to __read_mostly. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Additionaly exports the following information when providing the list of registered generic netlink families: - protocol version - header size - maximum number of attributes - list of available operations including - id - flags - avaiability of policy and doit/dumpit function libnl HEAD provides a utility to read this new information: 0x0010 nlctrl version 1 hdrsize 0 maxattr 6 op GETFAMILY (0x03) [POLICY,DOIT,DUMPIT] 0x0011 NLBL_MGMT version 1 hdrsize 0 maxattr 0 op unknown (0x02) [DOIT] op unknown (0x03) [DOIT] .... Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
When changing a device by ifindex without including a IFLA_IFNAME attribute, the ifname variable contains random garbage and is used to change the device name. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 James Morris 提交于
It seems that during the MIPv6 respin, some code which was originally conditionally compiled around CONFIG_XFRM_ADVANCED was accidently left in after the config option was removed. This patch removes an extraneous pointer (xerr_idxp) which is no longer needed. Signed-off-by: NJames Morris <jmorris@namei.org> Acked-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
Expose IPSEC modes output path to take an xfrm state as input param. This makes it consistent with the input mode processing (which already takes the xfrm state as a param). Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Mishin 提交于
Function sk_filter() is called from tcp_v{4,6}_rcv() functions with arg needlock = 0, while socket is not locked at that moment. In order to avoid this and similar issues in the future, use rcu for sk->sk_filter field read protection. Signed-off-by: NDmitry Mishin <dim@openvz.org> Signed-off-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NKirill Korotaev <dev@openvz.org>
-
由 Masahide NAKAMURA 提交于
Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Masahide NAKAMURA 提交于
This is a minor fix about transformation state flushing for net-2.6.19. Please apply it. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
By passing a Linux-generated TSO packet straight back into Linux, Xen becomes our first LRO user :) Unfortunately, there is at least one spot in our stack that needs to be changed to cope with this. The receive MSS estimate is computed from the raw packet size. This is broken if the packet is GSO/LRO. Fortunately the real MSS can be found in gso_size so we simply need to use that if it is non-zero. Real LRO NICs should of course set the gso_size field in future. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
A typo introduced by myself which leads to freeing the skb containing the netlink message when it should free the newly allocated skb for the reply. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-