KVM would like to consume any pending SError (or RAS error) after guest
exit. Today it has to unmask SError and use dsb+isb to synchronise the
CPU. With the RAS extensions we can use ESB to synchronise any pending
SError.

Add the necessary macros to allow DISR to be read and converted to an
ESR.

We clear the DISR register when we enable the RAS cpufeature, and the
kernel has not executed any ESB instructions. Any value we find in DISR
must have belonged to firmware. Executing an ESB instruction is the
only way to update DISR, so we can expect firmware to have handled
any deferred SError. By the same logic we clear DISR in the idle path.
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

KASAN needs to know whether the allocation happens in an IRQ handler.
This lets us strip everything below the IRQ entry point to reduce the
number of unique stack traces needed to be stored.

Move the definition of __irq_entry to <linux/interrupt.h> so that the
users don't need to pull in <linux/ftrace.h>.  Also introduce the
__softirq_entry macro which is similar to __irq_entry, but puts the
corresponding functions to the .softirqentry.text section.
Signed-off-by: NAlexander Potapenko <glider@google.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The gic_handle_irq() is defined with __exception_irq_entry attribute.
A single remaining work is to add its definition as ARM did. Below
shows how function graph data is changed with these hunks.

A prologue of an interrupt handler is drawn as follows.

- current status

 0)   0.208 us    |  cpuidle_not_available();
 0)               |  default_idle_call() {
 0)               |    arch_cpu_idle() {
 0)               |      __handle_domain_irq() {
 0)               |        irq_enter() {
 0)   0.313 us    |          rcu_irq_enter();
 0)   0.261 us    |          __local_bh_disable_ip();

- with this change

 0)   0.625 us    |  cpuidle_not_available();
 0)               |  default_idle_call() {
 0)               |    arch_cpu_idle() {
 0)   ==========> |
 0)               |      gic_handle_irq() {
 0)               |        __handle_domain_irq() {
 0)               |          irq_enter() {
 0)   0.885 us    |            rcu_irq_enter();
 0)   0.781 us    |            __local_bh_disable_ip();

An epilogue of an interrupt handler is recorded as follows.

- current status

 0)   0.261 us    |          idle_cpu();
 0)               |          rcu_irq_exit() {
 0)   0.521 us    |            rcu_eqs_enter_common.isra.46();
 0)   2.552 us    |          }
 0) ! 322.448 us  |        }
 0) ! 583.437 us  |      }
 0) # 1656.041 us |    }
 0) # 1658.073 us |  }

- with this change

 0)   0.677 us    |            idle_cpu();
 0)               |            rcu_irq_exit() {
 0)   1.770 us    |              rcu_eqs_enter_common.isra.46();
 0)   7.968 us    |            }
 0) # 1803.541 us |          }
 0) # 2626.667 us |        }
 0) # 2632.969 us |      }
 0)   <========== |
 0) # 14425.00 us |    }
 0) # 14430.98 us |  }

Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rabin Vincent <rabin@rab.in>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NJungseok Lee <jungseoklee85@gmail.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This patch uses the generic irqchip_init() function for initialising the
interrupt controller on arm64. It also adds several definitions required
by the ARM GIC irqchip driver but does not enable ARM_GIC yet.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch introduces a few AArch64-specific header files together with
Kbuild entries for generic headers.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

The patch adds the kernel booting and the initial setup code.
Documentation/arm64/booting.txt describes the booting protocol on the
AArch64 Linux kernel. This is subject to change following the work on
boot standardisation, ACPI.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NOlof Johansson <olof@lixom.net>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Add support for the Infineon TLE62x0 series of low-side driver chips, such
as the TLE6220 or TLE6230.  These can be viewed as output GPIOs specialized
for power switching applications.  The driver provides a userspace
interface to those GPIOs, and to the switch status they provide.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch from Sascha Hauer

This patch adds the base support for Hilscher's netX network
processors.
Signed-off-by: NRobert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from SAN People

Following changes were made to clock.c:

1) Replaced <asm/hardware/clock.h> with <linux/clk.h>
2) Removed old unused clk_enable & clk_disable.
3) Replaced clk_use/clk_unuse with clk_enable/clk_disable.

Otherwise it's the same as the previous patch.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Rationalise hardware.h include.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!