Just as with the X301. The X300 does not have a way to do SPDIF either.
It does not have a dock connector, nor does it have the SPDIF through
the headphone jack.

This patch fixes it so X300 does not show SPDIF, since it cannot do it.

To add all Lenovo Thinkpads had different codec subsytem IDs:

X300:
http://launchpadlibrarian.net/34862838/Card0.Codecs.codec.0.txtSigned-off-by: NJerone Young <jerone.young@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF

The Lenovo X301 does not have the ability to connect to a docking
station to use the SPDIF port. It also does not have the ability to do
SPDIF though the headphone jack or Display Port jacks.

This patch fixes it so this is not exposed for the X301 and users do
think it has the ability to do SPDIF.

I tested both headphone & display port jacks and it is not there. I have
tested this patch and it works great.

Also to add the other Thinkpads have different subsystem codec IDs.
Here are examples:

X301:
http://launchpadlibrarian.net/31561902/Card0.Codecs.codec.0.txt

X200:
http://launchpadlibrarian.net/49055036/Card0.Codecs.codec.0.txt

W500:
http://launchpadlibrarian.net/36276057/Card0.Codecs.codec.0.txtSigned-off-by: NJerone Young <jerone.young@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The current ALC259/268/269 parser ignores some pins as unhandled,
but user won't notice what goes wrong.  So, added a warning message
for the ignored pins as a hint.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The pin NID 0x1a should be handled as well as NID 0x1b.
Also added comments.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Call snd_hda_shutup_pins() for power-saving and reboot-notifier in
patch_conexant.c as well as other codecs.  This will reduce the pop
noise in power-save mode.

Reference: bnc#624896
	https://bugzilla.novell.com/show_bug.cgi?id=624896Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If BIOS sets up the input pin as VREF 50, use the value as is instead of
overriding forcibly to VREF 80.  This fixes the quality of inputs on
some devices like Packard-Bell M5210.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since ALC259/269 use the same parser of ALC268, the pin 0x1b was ignored
as an invalid widget.  Just add this NID to handle properly.
This will add the missing mixer controls for some devices.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Make a helper function to parse the digital I/Os of all Realtek codecs
to simplify the code and to ensure the setups.
Also, initialize digital I/O pins properly in init callbacks.  Some BIOS
seem to leave pins uninitialized.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some ALC662-compatible codecs like ALC892 may have more than 4
connections for the input source.  Use HDA_MAX_CONNECTIONS instead of
the fixed magic number 4.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a prefix and more information for error messages regarding the
connection-list in hda_codec.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The non-standard name "iMic" makes PulseAudio ignore the microphone.
BugLink: https://launchpad.net/bugs/605101Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ASUS P5-V provides a SSID that unexpectedly matches with the value
compilant with Realtek's specification.  Thus the driver interprets
it badly, resulting in non-working PC beep.

This patch adds a white-list for such a case; a white-list of known
devices with working PC beep.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Enable PC-beep as default for hardwares that aren't compliant with the
SSID value Realtek requires.  In such a case, better to enable the beep
to avoid a regression.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We check now the availability of PC beep and skip the build of beep
mixers, but the driver still registers the input device.  This should
be checked as well.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The behavior of Nvidia HDMI codec regarding the pin-detection unsol events
is based on the old HD-audio spec, i.e. PD bit indicates only the update
and doesn't show the current state.  Since the current code assumes the
new behavior, the pin-detection doesn't work relialby with these h/w.

This patch adds a flag for indicating the old spec, and fixes the issue
by checking the pin-detection explicitly for such hardware.
Tested-by: NWei Ni <wni@nvidia.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit afbd9b84
    ALSA: hda - Limit the amp value to write
introduced a regression for codec setups with amp offsets like IDT/STAC
codecs.  The limit value should be a raw value without offset calculation.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NDavid Henningsson <diwic@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is a follow on patch adds support for AMD based Lenovo G series
machines, such as the Lenovo G555.
Signed-off-by: NJerone Young <jerone.young@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some VAIO models with ALC275 have dual ADCs for both internal and external
mics, and the driver needs to switch one of them appropriately.
This patch adds a basic support for this functionality, dynamic switching
between two ADCs per jack plug state.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Correctly configure bidirectional pins when resuming; do not power down
widgets when they are needed for Smart5.1 output; and on 3-jack boards,
create the streams and controls needed for six channels.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Reported-and-tested-by: NViliam Kubis <viliam.kubis@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Check the amp max value at put callbacks and set the upper limit
so that the driver won't write any invalid value over the defined
range.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the beep mixer controls to Conexant codecs.
They simply control the digital beep generator widget.

For cx5047, I couldn't find any beep generator, so it's not implemented
there.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Many codecs now clear the pin controls at suspend via snd_hda_shutup_pins()
for reducing the click noise at power-off.  But this leaves some pins
uninitialized, and they'll be never recovered after resume.

This patch adds the proper recovery of cleared pin controls on resume.
Also it adds a check of bus->shutdown so that pins won't be cleared at
module unloading.

Reference: Kernel bug 16339
	http://bugzilla.kernel.org/show_bug.cgi?id=16339

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the PCI SSID gives an overriding SKU assno, PC-beep bit isn't
detected (since it's located over 16bit), resulting in no PC beep.
Also, many devices seem ignoring the requirement by Realtek's spec
for SSID numbers, and it also confuses the PC beep detection.

This patch assumes the PC beep is available on every machine with
PCI SSID override.  It's a regression fix from 2.6.34.

Reference: Kernel bug 16251
	http://bugzilla.kernel.org/show_bug.cgi?id=16251Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Also update the documentation.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://bugs.launchpad.net/bugs/463178

Set Macbook 5,2 (106b:4a00) hardware to use ALC885_MB5

Cc: <stable@kernel.org>
Signed-off-by: NLuke Yelavich <luke.yelavich@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the following compile warning.  kctl should be NULL-initialized.

  sound/pci/hda/patch_realtek.c: In function ‘alc_build_controls’:
  sound/pci/hda/patch_realtek.c:2550:23: warning: ‘kctl’ may be used uninitialized in this function
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Lenovo IdeaPad Y430 has an additional subwoofer connected at pin 0x1b,
which isn't muted when headphone is plugged in. This adds additional
support to the extra subwoofer via new ideapad model.
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The line-in input is 0x7 not 0x2 for MacBook (Pro) 5,1 / 5,2 models
Signed-off-by: NAlex Murray <murray.alex@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

With multiple codec configurations, some codec might have no ADC, thus
it keeps spec->adc_nids = NULL.  This causes an Oops in alc_build_controls().

Reference: kernel bug #16156
	https://bugzilla.kernel.org/show_bug.cgi?id=16156

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch add's the iMac7,1 SSID entry to
patch_realtek.c which adds sound support.
bug entry:
    https://bugs.launchpad.net/mactel-support/+bug/360866

Note:I do not have this machine on hand only
codec#0 file for the machine so please
test if you have the appropriate equipment.
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch add's the MacBookAir1,1 SSID entry to
patch_realtek.c which adds sound support.
bug entry:
    https://bugs.launchpad.net/mactel-support/+bug/268301

Note:I do not have this machine on hand only
codec#0 file for the machine so please
test if you have the appropriate equipment.
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This adds the SSID number to snd_pci_quirk for the
MacBookAir2,1 taken from codec#0 at:
    http://launchpadlibrarian.net/49455483/Card0.Codecs.codec.0.txt

keep in mind I do not have one of these machines on hand
so please if you do have this machine please test for me..
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Cursors need to be in the GTT domain when being accessed by the GPU.
Previously this was a fortuitous byproduct of userspace using pwrite()
to upload the image data into the cursor. The redundant clflush was
removed in commit 9b8c4a and so the image was no longer being flushed
out of the caches into main memory. One could also devise a scenario
where the cursor was rendered by the GPU, prior to being attached as the
cursor, resulting in similar corruption due to the missing MI_FLUSH.

Fixes:

  Bug 28335 - Cursor corruption caused by commit 9b8c4a0b
  https://bugs.freedesktop.org/show_bug.cgi?id=28335Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: NJeff Chua <jeff.chua.linux@gmail.com>
Tested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reported-by: NAndy Isaacson <adi@hexapodia.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>