- 01 1月, 2014 1 次提交
-
-
由 dingtianhong 提交于
Use the possibly more efficient ether_addr_equal or ether_addr_equal_unaligned to instead of memcmp. Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 12月, 2013 1 次提交
-
-
由 Rashika Kheria 提交于
This patch marks the function qlcnic_enable_tx_intr(), qlcnic_83xx_enable_tx_intr() and qlcnic_83xx_disable_tx_intr() in qlcnic_io.c as static because they are not used outside this file. Thus, it also removes the following warnings in ethernet/qlogic/qlcnic/qlcnic_io.c: drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c:130:13: warning: no previous prototype for ‘qlcnic_enable_tx_intr’ [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c:147:13: warning: no previous prototype for ‘qlcnic_83xx_enable_tx_intr’ [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c:153:13: warning: no previous prototype for ‘qlcnic_83xx_disable_tx_intr’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 12月, 2013 2 次提交
-
-
由 Himanshu Madhani 提交于
o Allow user to set sigle Tx/Rx queue in MSI-x mode, for ALL supported adapters. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Driver was using netif_tx_{stop,wake}_all_queues() api during link change event. Remove these api calls to manage queue start/stop event, as core networking stack will manage this based on netif_carrier_{on,off} call. These API's were modified as part of commit id 012ec812 ("qlcnic: Multi Tx queue support for 82xx Series adapter.") Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 11月, 2013 3 次提交
-
-
由 Himanshu Madhani 提交于
o 83xx and 84xx firmware is capable of multiple Tx queues. This patch will enable multiple Tx queues for 83xx/84xx series adapters. Max number of Tx queues supported will be 8. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Current driver has duplicate code for validating user input for changing Tx/SDS rings using set_channel ethtool interface. This patch removes duplicate code and refactored Tx/SDS ring validation for 82xx/83xx/84xx series adapter. o Refactored code now calculates maximum Tx/Rx ring driver can support based on Default, NPAR and SRIOV PF/VF mode of driver. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Enhance ethtool statistics to display multiple Tx queue stats for all supported adapters. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 10月, 2013 1 次提交
-
-
由 Sucheta Chakraborty 提交于
o Move dcb specific function definitions to dcb files. o Move dcb specific variables to qlcnic_dcb structure. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 9月, 2013 1 次提交
-
-
由 Michal Schmidt 提交于
Since commit 82dc3c63 ("net: introduce NAPI_POLL_WEIGHT") netif_napi_add() produces an error message if a NAPI poll weight greater than 64 is requested. qlcnic requests the weight as large as 256 for some of its rings, and smaller values for other rings. For instance in qlcnic_82xx_napi_add() I think the intention was to give the tx+rx ring a bigger weight than to rx-only rings, but it's actually doing the opposite. So I'm assuming the weights do not really matter much. Just use the standard NAPI weights for all rings. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Acked-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 8月, 2013 1 次提交
-
-
由 Sucheta Chakraborty 提交于
o Adapter sends Asynchronous Event Notifications to the driver when there are changes in the switch or adapter DCBX configuration. AEN handler updates the driver DCBX parameters. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 8月, 2013 2 次提交
-
-
由 Himanshu Madhani 提交于
o Enable diagnostic test via ethtool and QConvergeConsole application when Multiple Tx queues are enabled on 82xx series adapters. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o 82xx firmware allows support for multiple Tx queues. This patch will enable multi Tx queue support for 82xx series adapter. Max number of Tx queues supported will be 8. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 8月, 2013 2 次提交
-
-
由 Masanari Iida 提交于
Correct spelling typo in printk Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Acked-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Manish Chopra 提交于
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 8月, 2013 2 次提交
-
-
由 Shahed Shaikh 提交于
o Delete MAC address from the adapter's filter table if the source MAC address of ingress packet matches. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Driver was passing the address of a pointer instead of the pointer itself. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 8月, 2013 1 次提交
-
-
由 Jitendra Kalsaria 提交于
o Enhanced the driver to use standard Linux error codes o Return a unique error code to indicate loopback is in progress Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 4月, 2013 3 次提交
-
-
由 Rajesh Borundia 提交于
o Add support for VLAN id configuration per VF using iproute2 tool. o VLAN id's 1-4094 are treated as PVID by the PF and Guest VLAN tagging is not allowed by default. o PVID is disabled when the VLAN id is set to 0 o Guest VLAN tagging is allowed when the VLAN id is set to 4095. o Only one Guest VLAN id is supported. o VLAN id can be changed only when the VF driver is not loaded. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o 82xx adapter requires VLAN id in little endian format. Instead of passing vlan id parameter as __le16, pass the parameter as u16 and use cpu_to_le16 at appropriate places. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 4月, 2013 1 次提交
-
-
由 Sritej Velaga 提交于
When driver receives a packet with gso size > 0 and when TSO is disabled, it should be transmitted as a TSO packet to prevent Tx timeout and subsequent firmware reset. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2013 2 次提交
-
-
由 Rajesh Borundia 提交于
o Add support for commands from VF to PF. o PF validates the commands sent by the VF before sending it to adapter. o vPort is a container of resources. PF creates vPort for VFs and attach resources to it. vPort is transparent to the VF. o Separate 83xx TX and RX hardware resource cleanup from 82xx. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o VF will use shared MSI-X interrupt vector for Tx and Rx. o When QLCNIC_INTR_SHARED flag is set Tx and Rx will share MSI-X interrupt vector. Tx will use a separate MSI-X interrupt vector from Rx otherwise. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 3月, 2013 1 次提交
-
-
由 Li RongQing 提交于
replace ip_fast_csum with csum_replace2 to save cpu cycles Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 2月, 2013 1 次提交
-
-
由 Sasha Levin 提交于
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: NPeter Senna Tschudin <peter.senna@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 2月, 2013 3 次提交
-
-
由 Shahed Shaikh 提交于
Delete the MAC address of a VM, from the adapter's embedded switch, after the VM had been migrated out of this adapter/server. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Set gso_size to MSS obtained from adapter to avoid incorrect estimation of receive MSS, which would lead to delayed ACKs in some traffic patterns Example: Send two or three packets and wait for ack and only then send remaining packets. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Cleanly seperate 83xx Legacy interrupt handling code from 82xx o Update 83xx Legacy interrupt handling code to match with the spec Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2013 2 次提交
-
-
由 Jitendra Kalsaria 提交于
Create a helper routine to handle async events, as it is being called from multiple places Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
qlcnic set gso_size but not gso type. This leads to crashes in macvtap. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Acked-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2013 1 次提交
-
-
由 Jitendra Kalsaria 提交于
We recently refactored the driver source, this patch will take care of updating copyright date and adding it to newly added files. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 1月, 2013 1 次提交
-
-
由 Shahed Shaikh 提交于
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 1月, 2013 2 次提交
-
-
由 Jitendra Kalsaria 提交于
Providing communication channel between KVM and e-Switch so that it can be informed when hypervisor configures a MAC address and VLAN. qlcnic_mac_learn module param usage will be changed to: 0 = MAC learning is disable 1 = Driver learning is enable 2 = FDB learning is enable Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 1月, 2013 3 次提交
-
-
由 Sony Chacko 提交于
Add 83xx adapter data path routines Update few 82xx adapter data path routines Modify datapath resource allocation routines Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
83xx adapter register map. 83xx hardware interface routines. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Refactor 82xx driver to support new adapter - Qlogic 83XX CNA Create adapter abstraction layer and seperate 82xx hardware access routines. Create mailbox based HW interface mechanism Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 12月, 2012 2 次提交
-
-
由 Sony Chacko 提交于
Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Move HW specific data to a seperate structure as part of refactoring 82xx adapter driver. Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 11月, 2012 1 次提交
-
-
由 Sony Chacko 提交于
Fix coding style issues in qlcnic_io.c Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-