Now poodle/corgi/spitz have been been converted to use SPI-based
drivers, remove the now unused corgi_ssp.c and corgi_lcd.c. And
as well as the unused reference of {corgi,spitz}ssp_device.
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Original patch from Dmitry Baryshkov's initial scoop gpio conversion
work at http://git.infradead.org/users/dbaryshkov/zaurus-2.6.git.

TODO: figure out the MFP configuration of the SSP2 which looks like
to be already configured by the boot loader, though.
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Original patch from Dmitry Baryshkov's initial scoop gpio conversion
work at http://git.infradead.org/users/dbaryshkov/zaurus-2.6.git.

Separated into this dedicated generic GPIO conversion patch for the
work of deprecating pxa_gpio_mode().
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NEric Miao <eric.miao@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The MFP configuration table is reverse engineered from those
magic GAFRx_{L|U} values, and it looks much better now.

Also, the deprecated pxa_gpio_mode() invocations are removed.
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Acked-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Direct manipulation of GPIO registers are no longer encouraged, use
the new GPIO API instead. Since the GPIO has to be requested before
use, .startup and .shutdown are added to the IrDA device platform
data to request and free the GPIO.
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Acked-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NEric Miao <eric.miao@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This is not generic, and is added here for backward compatibility.
It is made an individual commit here to make it easier for revert
once the sharpsl_pm gets generic enough.
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch provides an ARM implementation of ioremap_wc().

We use different page table attributes depending on which CPU we
are running on:

- Non-XScale ARMv5 and earlier systems: The ARMv5 ARM documents four
  possible mapping types (CB=00/01/10/11).  We can't use any of the
  cached memory types (CB=10/11), since that breaks coherency with
  peripheral devices.  Both CB=00 and CB=01 are suitable for _wc, and
  CB=01 (Uncached/Buffered) allows the hardware more freedom than
  CB=00, so we'll use that.

  (The ARMv5 ARM seems to suggest that CB=01 is allowed to delay stores
  but isn't allowed to merge them, but there is no other mapping type
  we can use that allows the hardware to delay and merge stores, so
  we'll go with CB=01.)

- XScale v1/v2 (ARMv5): same as the ARMv5 case above, with the slight
  difference that on these platforms, CB=01 actually _does_ allow
  merging stores.  (If you want noncoalescing bufferable behavior
  on Xscale v1/v2, you need to use XCB=101.)

- Xscale v3 (ARMv5) and ARMv6+: on these systems, we use TEXCB=00100
  mappings (Inner/Outer Uncacheable in xsc3 parlance, Uncached Normal
  in ARMv6 parlance).

  The ARMv6 ARM explicitly says that any accesses to Normal memory can
  be merged, which makes Normal memory more suitable for _wc mappings
  than Device or Strongly Ordered memory, as the latter two mapping
  types are guaranteed to maintain transaction number, size and order.
  We use the Uncached variety of Normal mappings for the same reason
  that we can't use C=1 mappings on ARMv5.

  The xsc3 Architecture Specification documents TEXCB=00100 as being
  Uncacheable and allowing coalescing of writes, which is also just
  what we need.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This reverts commit ae82cbfc. It
needs the new byteorder headers to be exported to userspace, and
they aren't yet -- and probably shouldn't be, at this point in the
2.6.27 release cycle (or ever, for that matter).
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>

mcbsp is confused as to what takes a physical or virtual address.
Fix the two instances where it gets it wrong.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The driver(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  arch/arm/plat-mxc/clock.c

This patch removes the said #include <version.h>.
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/plat-omap/gpio.c: In function '_omap_gpio_init':
arch/arm/plat-omap/gpio.c:1492: error: 'omap_mpuio_device' undeclared (first use in this function)
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

remove unmatched comment end.
Signed-off-by: NJean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Ordinarily, memory holes in flatmem still have a valid memmap and is safe
to use. However, an architecture (ARM) frees up the memmap backing memory
holes on the assumption it is never used. /proc/pagetypeinfo reads the
whole range of pages in a zone believing that the memmap is valid and that
pfn_valid will return false if it is not. On ARM, freeing the memmap breaks
the page->zone linkages even though pfn_valid() returns true and the kernel
can oops shortly afterwards due to accessing a bogus struct zone *.

This patch lets architectures say when FLATMEM can have holes in the
memmap. Rather than an expensive check for valid memory, /proc/pagetypeinfo
will confirm that the page linkages are still valid by checking page->zone
is still the expected zone. The lookup of page_zone is safe as there is a
limited range of memory that is accessed when calling page_zone.  Even if
page_zone happens to return the correct zone, the impact is that the counters
in /proc/pagetypeinfo are slightly off but fragmentation monitoring is
unlikely to be relevant on an embedded system.
Reported-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Tested-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch changes arm to use the new bcd2bin/bin2bcd functions instead
of the obsolete BCD_TO_BIN/BIN_TO_BCD macros.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Taken from omap 97b705ad835f1481270c4b67b402d6e37fa8ad15:
  ARM: OMAP: Misc compile fixes after syncing with mainline

  Also fix 2430 smc91x to use IRQ_LOWLEVEL.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Update omap_h2_1610 and omap_osk_5912 default configurations.

Add ams delta, n770, omap 2430sdp, apollon_2420, generic 1510, 1610,
1710, 2420, h4 2420, innovator 1510 and 1610, perseus2 730, palte,
palmtt, palmz71 and sx1 default configurations.

Pulled out of the omap zoom tree.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix the S3C2443 clock register definitions for selecting the EPLL
reference clock described by S3C2443_CLKSRC_EPLLREF.
Signed-off-by: NWei Shuai <cpuwolf@gmail.com>
[ben-linux@fluff.org: minor description fixes]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The first spi bus is registered with number 0, but
the board data says that the device on it is registered
on bus 1.

Move the spi bus to bus 1 to keep the compatibility with the
original board-support patches.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move debugging output to dev_dbg() instead of dev_info().
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the following sparse warnings in arch/arm/plat-s3c24xx/pwm.c:

warning: symbol 's3c_device_timer' was not declared. Should it be static?
warning: symbol 'pwm_calc_tin' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the following sparse warnings in arch/arm/plat-s3c24xx/pwm-clock.c:

warning: symbol 'clk_timer_scaler' was not declared. Should it be static?
warning: symbol 'clk_timer_tclk' was not declared. Should it be static?
warning: symbol 'clk_timer_tdiv' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the following problems spotted by sparse:

warning: symbol 's3c24xx_gpiolib_input' was not declared. Should it be static?
warning: symbol 's3c24xx_gpiolib_output' was not declared. Should it be static?
warning: symbol 's3c24xx_gpiolib_set' was not declared. Should it be static?
warning: symbol 's3c24xx_gpiolib_get' was not declared. Should it be static?
warning: symbol 'gpios' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the following sparse errors in arch/arm/mach-s3c2410/nor-simtec.c:

53:27: warning: symbol 'simtec_nor_pdata' was not declared. Should it be static?
77:13: warning: symbol 'nor_simtec_init' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

corgi, spitz and poodle have audio codecs on their primary I2C bus so
need to call pxa_set_i2c_info() to set it up during init. Tested on
spitz by Stanislav.
Reported-by: NStanislav Brabec <utx@penguin.cz>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch lets the files using linux/version.h match the files that
#include it.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NNicolas Pitre <nico@marvell.com>

Register UART1 on QNAP TS-209 and TS-409 because the PIC controller
is connected to it.  This fixes a regression from 2.6.26.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>

The lm75 driver was recently converted to the new-style binding,
so now it can be loaded from the DNS-323 support code.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Tested-by: NTobias Poschwatta <tp@fonz.de>
Acked-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>

Flash needs to be set up before we can try to read the MAC address
from there.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>

The Kurobox Pro crashes when any of the PCI controller registers
are accessed.  This patch adds a function to the Orion PCI handling
code that board support code can call to disable enumerating the
PCI bus entirely, and makes the Kurobox Pro PCI-related init code
call this function.
Signed-off-by: NPer Andersson <avtobiff@gmail.com>
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>