- 01 4月, 2018 2 次提交
-
-
由 Jon Maloy 提交于
With the new RB tree structure for service ranges it becomes possible to solve an old problem; - we can now allow overlapping service ranges in the table. When inserting a new service range to the tree, we use 'lower' as primary key, and when necessary 'upper' as secondary key. Since there may now be multiple service ranges matching an indicated 'lower' value, we must also add the 'upper' value to the functions used for removing publications, so that the correct, corresponding range item can be found. These changes guarantee that a well-formed publication/withdrawal item from a peer node never will be rejected, and make it possible to eliminate the problematic backlog functionality we currently have for handling such cases. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Maloy 提交于
The current design of the binding table has an unnecessary memory consuming and complex data structure. It aggregates the service range items into an array, which is expanded by a factor two every time it becomes too small to hold a new item. Furthermore, the arrays never shrink when the number of ranges diminishes. We now replace this array with an RB tree that is holding the range items as tree nodes, each range directly holding a list of bindings. This, along with a few name changes, improves both readability and volume of the code, as well as reducing memory consumption and hopefully improving cache hit rate. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 3月, 2018 4 次提交
-
-
由 Jon Maloy 提交于
We rename some lists and fields in struct publication both to make the naming more consistent and to better reflect their roles. We also update the descriptions of those lists. node_list -> local_publ cluster_list -> all_publ pport_list -> binding_sock ref -> port There are no functional changes in this commit. Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Maloy 提交于
The size of struct publication can be reduced further. Membership in lists 'nodesub_list' and 'local_list' is mutually exlusive, in that remote publications use the former and local publications the latter. We replace the two lists with one single, named 'binding_node' which reflects what it really is. Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Maloy 提交于
As a further consequence of the previous commits, we can also remove the member 'zone_list 'in struct name_info and struct publication. Instead, we now let the member cluster_list take over the role a container of all publications of a given <type,lower, upper>. We also remove the counters for the size of those lists, since they don't serve any purpose. Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Maloy 提交于
As a consequence of the previous commit we nan now eliminate zone scope related lists in the name table. We start with name_table::publ_list[3], which can now be replaced with two lists, one for node scope publications and one for cluster scope publications. Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 2月, 2018 1 次提交
-
-
由 Jon Maloy 提交于
Because of the requirement for total distribution transparency, users send subscriptions and receive topology events in their own host format. It is up to the topology server to determine this format and do the correct conversions to and from its own host format when needed. Until now, this has been handled in a rather non-transparent way inside the topology server and subscriber code, leading to unnecessary complexity when creating subscriptions and issuing events. We now improve this situation by adding two new macros, tipc_sub_read() and tipc_evt_write(). Both those functions calculate the need for conversion internally before performing their respective operations. Hence, all handling of such conversions become transparent to the rest of the code. Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 1月, 2018 1 次提交
-
-
由 Jon Maloy 提交于
In commit 232d07b7 ("tipc: improve groupcast scope handling") we inadvertently broke non-group multicast transmission when changing the parameter 'domain' to 'scope' in the function tipc_nametbl_lookup_dst_nodes(). We missed to make the corresponding change in the calling function, with the result that the lookup always fails. A closer anaysis reveals that this parameter is not needed at all. Non-group multicast is hard coded to use CLUSTER_SCOPE, and in the current implementation this will be delivered to all matching destinations except those which are published with NODE_SCOPE on other nodes. Since such publications never will be visible on the sending node anyway, it makes no sense to discriminate by scope at all. We now remove this parameter altogether. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 1月, 2018 2 次提交
-
-
由 Jon Maloy 提交于
When a member joins a group, it also indicates a binding scope. This makes it possible to create both node local groups, invisible to other nodes, as well as cluster global groups, visible everywhere. In order to avoid that different members end up having permanently differing views of group size and memberhip, we must inhibit locally and globally bound members from joining the same group. We do this by using the binding scope as an additional separator between groups. I.e., a member must ignore all membership events from sockets using a different scope than itself, and all lookups for message destinations must require an exact match between the message's lookup scope and the potential target's binding scope. Apart from making it possible to create local groups using the same identity on different nodes, a side effect of this is that it now also becomes possible to create a cluster global group with the same identity across the same nodes, without interfering with the local groups. Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Maloy 提交于
Currently, when a user is subscribing for binding table publications, he will receive a PUBLISH event for all already existing matching items in the binding table. However, a group socket making a subscriptions doesn't need this initial status update from the binding table, because it has already scanned it during the join operation. Worse, the multiplicatory effect of issuing mutual events for dozens or hundreds group members within a short time frame put a heavy load on the topology server, with the end result that scale out operations on a big group tend to take much longer than needed. We now add a new filter option, TIPC_SUB_NO_STATUS, for topology server subscriptions, so that this initial avalanche of events is suppressed. This change, along with the previous commit, significantly improves the range and speed of group scale out operations. We keep the new option internal for the tipc driver, at least for now. Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2017 3 次提交
-
-
由 Jon Maloy 提交于
In this commit, we make it possible to send connectionless unicast messages to any member corresponding to the given member identity, when there is more than one such member. The sender must use a TIPC_ADDR_NAME address to achieve this effect. We also perform load balancing between the destinations, i.e., we primarily select one which has advertised sufficient send window to not cause a block/EAGAIN delay, if any. This mechanism is overlayed on the always present round-robin selection. Anycast messages are subject to the same start synchronization and flow control mechanism as group broadcast messages. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Maloy 提交于
As a preparation for introducing flow control for multicast and datagram messaging we need a more strictly defined framework than we have now. A socket must be able keep track of exactly how many and which other sockets it is allowed to communicate with at any moment, and keep the necessary state for those. We therefore introduce a new concept we have named Communication Group. Sockets can join a group via a new setsockopt() call TIPC_GROUP_JOIN. The call takes four parameters: 'type' serves as group identifier, 'instance' serves as an logical member identifier, and 'scope' indicates the visibility of the group (node/cluster/zone). Finally, 'flags' makes it possible to set certain properties for the member. For now, there is only one flag, indicating if the creator of the socket wants to receive a copy of broadcast or multicast messages it is sending via the socket, and if wants to be eligible as destination for its own anycasts. A group is closed, i.e., sockets which have not joined a group will not be able to send messages to or receive messages from members of the group, and vice versa. Any member of a group can send multicast ('group broadcast') messages to all group members, optionally including itself, using the primitive send(). The messages are received via the recvmsg() primitive. A socket can only be member of one group at a time. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Maloy 提交于
We often see a need for a linked list of destination identities, sometimes containing a port number, sometimes a node identity, and sometimes both. The currently defined struct u32_list is not generic enough to cover all cases, so we extend it to contain two u32 integers and rename it to struct tipc_dest_list. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 1月, 2017 1 次提交
-
-
由 Jon Paul Maloy 提交于
As a further preparation for the upcoming 'replicast' functionality, we add some necessary structs and functions for looking up and returning a list of all nodes that host destinations for a given multicast message. Reviewed-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 1月, 2017 1 次提交
-
-
由 Jon Paul Maloy 提交于
During multicast reception we currently use a simple linked list with push/pop semantics to store port numbers. We now see a need for a more generic list for storing values of type u32. We therefore make some modifications to this list, while replacing the prefix 'tipc_plist_' with 'u32_'. We also add a couple of new functions which will come to use in the next commits. Acked-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 2月, 2015 1 次提交
-
-
由 Richard Alpe 提交于
Add functionality for printing a dump header and convert TIPC_CMD_SHOW_NAME_TABLE to compat dumpit. Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 2月, 2015 2 次提交
-
-
由 Jon Paul Maloy 提交于
In a previous commit in this series we resolved a race problem during unicast message reception. Here, we resolve the same problem at multicast reception. We apply the same technique: an input queue serializing the delivery of arriving buffers. The main difference is that here we do it in two steps. First, the broadcast link feeds arriving buffers into the tail of an arrival queue, which head is consumed at the socket level, and where destination lookup is performed. Second, if the lookup is successful, the resulting buffer clones are fed into a second queue, the input queue. This queue is consumed at reception in the socket just like in the unicast case. Both queues are protected by the same lock, -the one of the input queue. Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
The structure 'tipc_port_list' is used to collect port numbers representing multicast destination socket on a receiving node. The list is not based on a standard linked list, and is in reality optimized for the uncommon case that there are more than one multicast destinations per node. This makes the list handling unecessarily complex, and as a consequence, even the socket multicast reception becomes more complex. In this commit, we replace 'tipc_port_list' with a new 'struct tipc_plist', which is based on a standard list. We give the new list stack (push/pop) semantics, someting that simplifies the implementation of the function tipc_sk_mcast_rcv(). Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 1月, 2015 2 次提交
-
-
由 Ying Xue 提交于
TIPC name table is used to store the mapping relationship between TIPC service name and socket port ID. When tipc supports namespace, it allows users to publish service names only owned by a certain namespace. Therefore, every namespace must have its private name table to prevent service names published to one namespace from being contaminated by other service names in another namespace. Therefore, The name table global variable (ie, nametbl) and its lock must be moved to tipc_net structure, and a parameter of namespace must be added for necessary functions so that they can obtain name table variable defined in tipc_net structure. Signed-off-by: NYing Xue <ying.xue@windriver.com> Tested-by: NTero Aho <Tero.Aho@coriant.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
Global variables associated with node table are below: - node table list (node_htable) - node hash table list (tipc_node_list) - node table lock (node_list_lock) - node number counter (tipc_num_nodes) - node link number counter (tipc_num_links) To make node table support namespace, above global variables must be moved to tipc_net structure in order to keep secret for different namespaces. As a consequence, these variables are allocated and initialized when namespace is created, and deallocated when namespace is destroyed. After the change, functions associated with these variables have to utilize a namespace pointer to access them. So adding namespace pointer as a parameter of these functions is the major change made in the commit. Signed-off-by: NYing Xue <ying.xue@windriver.com> Tested-by: NTero Aho <Tero.Aho@coriant.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 12月, 2014 2 次提交
-
-
由 Ying Xue 提交于
Convert tipc name table read-write lock to RCU. After this change, a new spin lock is used to protect name table on write side while RCU is applied on read side. Signed-off-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Tested-by: NErik Hugne <erik.hugne@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
Name table locking policy is going to be adjusted from read-write lock protection to RCU lock protection in the future commits. But its essential precondition is to convert the allocation way of name table from static to dynamic mode. Signed-off-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Tested-by: NErik Hugne <erik.hugne@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 11月, 2014 1 次提交
-
-
由 Ying Xue 提交于
The node subscribe infrastructure represents a virtual base class, so its users, such as struct tipc_port and struct publication, can derive its implemented functionalities. However, after the removal of struct tipc_port, struct publication is left as its only single user now. So defining an abstract infrastructure for one user becomes no longer reasonable. If corresponding new functions associated with the infrastructure are moved to name_table.c file, the node subscription infrastructure can be removed as well. Signed-off-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 11月, 2014 1 次提交
-
-
由 Richard Alpe 提交于
Add TIPC_NL_NAME_TABLE_GET command to the new tipc netlink API. This command supports dumping the name table of all nodes. Netlink logical layout of name table response message: -> name table -> publication -> type -> lower -> upper -> scope -> node -> ref -> key Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 6月, 2013 1 次提交
-
-
由 Paul Gortmaker 提交于
No runtime code changes here. Just a realign of the function arguments to start where the 1st one was, and fit as many args as can be put in an 80 char line. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 5月, 2012 1 次提交
-
-
由 Paul Gortmaker 提交于
Some of the comment blocks are floating in limbo between two functions, or between blocks of code. Delete the extra line feeds between any comment and its associated following block of code, to be consistent with the majority of the rest of the kernel. Also delete trailing newlines at EOF and fix a couple trivial typos in existing comments. This is a 100% cosmetic change with no runtime impact. We get rid of over 500 lines of non-code, and being blank line deletes, they won't even show up as noise in git blame. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 25 2月, 2012 1 次提交
-
-
由 Allan Stephens 提交于
Streamlines the logic that prevents an application from binding a reserved TIPC name type to a port by moving the check to the code that handles a socket bind() operation. This allows internal TIPC subsystems to bind a reserved name without having to set an atomic flag to gain permission to use such a name. (This simplification is now possible due to the elimination of support for TIPC's native API.) Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 30 12月, 2011 2 次提交
-
-
由 Paul Gortmaker 提交于
Make this rename so that it is consistent with the majority of the other tipc structs and to assist in removing any ambiguity with other similar names in other subsystems. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Paul Gortmaker 提交于
Make this rename so that it is consistent with the majority of the other tipc structs and to assist in removing any ambiguity with other similar names in other subsystems. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 25 6月, 2011 1 次提交
-
-
由 Allan Stephens 提交于
Modifies the main circular linked lists of publications used in TIPC's name table to use the standard kernel linked list type. This change simplifies the deletion of an existing publication by eliminating the need to search up to three lists to locate the publication. The use of standard list routines also helps improve the readability of the name table code by make it clearer what each list operation being performed is actually doing. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 02 1月, 2011 1 次提交
-
-
由 Allan Stephens 提交于
Cleans up TIPC's source code to eliminate deviations from generally accepted coding conventions relating to leading/trailing white space and white space around commas, braces, cases, and sizeof. These changes are purely cosmetic and do not alter the operation of TIPC in any way. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 9月, 2008 1 次提交
-
-
由 David S. Miller 提交于
Andrew Morton reported a build failure on sparc32, because TIPC uses names like "struct node" and there is a like named data structure defined in linux/node.h This just regexp replaces "struct node*" to "struct tipc_node*" to avoid this and any future similar problems. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2007 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 1月, 2006 1 次提交
-
-
由 Per Liden 提交于
This patch adds a tipc_ prefix to all externally visible symbols. Signed-off-by: NPer Liden <per.liden@ericsson.com>
-
- 13 1月, 2006 4 次提交
-
-
由 Per Liden 提交于
Updated copyright notice to include the year the file was actually created. Information about file creation dates was extracted from the files in the old CVS repository at tipc.sourceforge.net. Signed-off-by: NPer Liden <per.liden@nospam.ericsson.com>
-
由 Per Liden 提交于
The copyright statements from different parts of Ericsson have been merged into one. Signed-off-by: NPer Liden <per.liden@nospam.ericsson.com>
-
由 Per Liden 提交于
The license header in each file now more clearly state that this code is licensed under a dual BSD/GPL. Before this was only evident if you looked at the MODULE_LICENSE line in core.c. Signed-off-by: NPer Liden <per.liden@nospam.ericsson.com>
-
由 Per Liden 提交于
TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.netSigned-off-by: NPer Liden <per.liden@nospam.ericsson.com>
-